•  

    Full conference program

  • LEgend
    •  S1
    •  S2
    •  S3
    •  S4
    •  S5
    •  S6
    •  S7
    •  S8
    •  S9
    •  S10
    •  S11
    •  S12
    •  SS13
    •  SS14
    •  SS15
    •  SS16
    •  Plenary / Keynote / Highlight 
    •  Scientific Event / Social Event
    • Posters
    • Speaker
  • The search engine will allow you to find speakers, authors, session titles, abstract titles.
    You can use the "Symposia" filter and the search engine to narrow your program research.
     
    14:30 - 14:50 | Sintered dental inserts based on ion-doped hydroxyapatite as dentin substitutesTamara MATIC, Innovation Center of the Faculty of Technology and Metallurgy Ltd, Belgrade, Serbia

    person_pinTamara MATIC, Innovation Center of the Faculty of Technology and Metallurgy Ltd, Belgrade, Serbia
    14:50 - 15:10 | Preclinical evaluation of antibacterial zinc-doped hydroxyapatite nanoparticles for treatment of bone infectionsLizzy CUYPERS, Radboudumc Dentistry, The Netherlands

    person_pinLizzy CUYPERS, Radboudumc Dentistry, The Netherlands
    15:10 - 15:30 | Development of Yttrium-Doped BaTiO3 for Next-Generation Multilayer Ceramic CapacitorsMohammed TIHTIH, Institute of Ceramic and Polymer Engineering/University of Miskolc, Hungary

    person_pinMohammed TIHTIH, Institute of Ceramic and Polymer Engineering/University of Miskolc, Hungary
    15:30 - 15:50 | Biophotonic glass-based scaffolds for drug releaseSonya GHANAVATI, Faculty of Medicine and Health Technology, Tampere University, Korkeakoulunkatu 3, Tampere, Finland
    Evellyn SANTOS MAGALHAES, Photonics Laboratory, Tampere University, Korkeakoulunkatu 3, Tampere 33720, Finland
    Chi NGUYEN, Photonics Laboratory, Tampere University, Korkeakoulunkatu 3, Tampere 33720, Finland
    Bartosz BONDZIOR,
    Mika LASTUSAARI, Department of Chemistry, University of Turku, FI-20014, Turku, Finland
    Jeffrey N ANKER, Department of Chemistry, Clemson University, Clemson, SC, United States
    Andrew DRAGANSKI , Zylö Therapeutics, Greenville, SC, United States
    Laeticia PETIT, Photonics Laboratory, Tampere University, Korkeakoulunkatu 3, Tampere 33720, Finland
    Jonathan MASSERA, Faculty of Medicine and Health Technology, Tampere University, Korkeakoulunkatu 3, Tampere, Finland

    person_pinSonya GHANAVATI, Faculty of Medicine and Health Technology, Tampere University, Korkeakoulunkatu 3, Tampere, Finland
    15:50 - 16:10 | Octacalcium phosphate: journey of creating a unique drug delivery vehicleIiijana KOVRLIJA, Riga Technical University, Latvia

    person_pinIiijana KOVRLIJA, Riga Technical University, Latvia
    16:10 - 16:30 | Porous bioceramic scaffolds prepared by supercritically dried sol-gel derived calcium phosphatesFloren RADOVANOVIC-PERIC, University of Zagreb Faculty of Chemical Engineering and Technology, Zagreb, Croatia

    person_pinFloren RADOVANOVIC-PERIC, University of Zagreb Faculty of Chemical Engineering and Technology, Zagreb, Croatia
    17:00 - 17:20 | Optimization of magnetite synthesis processes for biomedical applicationsCristina CHIRCOV, University Politehnica of Bucharest , Croatia

    person_pinCristina CHIRCOV, University Politehnica of Bucharest , Croatia
    17:20 - 17:40 | How to protect human life? Unconventional use of ceramic-polymer smart materialsRadoslaw ZUROWSKI, Warsaw University of Technology, Faculty of Chemistry, Poland

    person_pinRadoslaw ZUROWSKI, Warsaw University of Technology, Faculty of Chemistry, Poland
    17:40 - 18:00 | Oxyfluoride glass-ceramics prepared by a novel sol-gel route for photonic applicationsMaria Eugenia CRUZ, Instituto de Cerámica y Vidrio (ICV-CSIC), Spain

    person_pinMaria Eugenia CRUZ, Instituto de Cerámica y Vidrio (ICV-CSIC), Spain
    18:00 - 18:20 | Formulation and modeling of the shaping of SiC refractory tiles for waste-to-energy facilitiesAudrey TIXIER, Mines Saint-Étienne and CEMHTI, FRANCE

    person_pinAudrey TIXIER, Mines Saint-Étienne and CEMHTI, FRANCE
    P08:30 - 08:50 | Welcome & IntroductionJérôme CHEVALIER, Chairman ECerS 2023
    Anne LERICHE, Co-Chair ECerS 2023
    Helen REVERON, Scientific Chair ECerS 2023
    Francis CAMBIER, President European Ceramic Society
    Jacques POIRIER, President French Ceramic Society

    person_pinJérôme CHEVALIER, Chairman ECerS 2023
    Anne LERICHE, Co-Chair ECerS 2023
    Helen REVERON, Scientific Chair ECerS 2023
    Francis CAMBIER, President European Ceramic Society
    Jacques POIRIER, President French Ceramic Society
    P08:50 - 09:20 | Ceramic as key enabler for sustainabilityYves BOUSSANT-ROUX, R&D Vice-President Ceramic Materials, Saint-Gobain Innovative Materials, France

    person_pinYves BOUSSANT-ROUX, R&D Vice-President Ceramic Materials, Saint-Gobain Innovative Materials, France
    P09:20 - 09:50 | Smart Factory: vision of the future ceramic industryRichard GAIGNON, CEO, 3DCeram, France

    person_pinRichard GAIGNON, CEO, 3DCeram, France
    P09:50 - 10:20 | ZPTA ceramic bearing surfaces as a preferred choice in joint arthroplasty?Alessandro Alan PORPORATI,

    person_pinAlessandro Alan PORPORATI, CeramTec GmbH, Germany; University of Trieste, Italy
    P10:20 - 10:30 | Industry, Education, Research: A winning trio in France in the field of ceramicsRichard GAIGNON, on behalf of the Confederation of Ceramic Industries of France (CICF)

    person_pinRichard GAIGNON, on behalf of the Confederation of Ceramic Industries of France (CICF)
    11:00 - 11:20 | Understanding the cold sintering process of ceramicsAbdullah JABR, Montanuniversität Leoben, Austria

    person_pinAbdullah JABR, Montanuniversität Leoben, Austria
    11:20 - 11:40 | Effect of molecular weight and concentration of dispersants on the slip characteristics, 3D printing and sintered bodies of hydroxyapatiteAshley DAVIDSON, Technological University Dublin, Ireland

    person_pinAshley DAVIDSON, Technological University Dublin, Ireland
    11:40 - 12:00 | Voltage-driven atomic level response of ferroelectric domain wallsOana-Andreea CONDURACHE, Jozef Stefan Institute, slovenia

    person_pinOana-Andreea CONDURACHE, Jozef Stefan Institute, slovenia
    12:00 - 12:20 | Co – Extrusion of Alumina Core – Shell Structures Fabricated by RobocastingMichelle WEICHELT, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany

    person_pinMichelle WEICHELT, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany
    12:20 - 12:40 | Improvement of the Performance of Silicon-Graphite Anodes by Ultrathin Atomic Layer Deposited ZnO FilmsAlper GUNEREN, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Slovak Republic

    person_pinAlper GUNEREN, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Slovak Republic
    12:40 - 13:00 | Optimization of Direct Ink Writing Parameters and Post Processing to Produce High-Density Monolithic Alumina Toughened Zirconia PartsBerfu GOKSEL, KU Leuven - Department Materials Engineering , Belgium

    person_pinBerfu GOKSEL, KU Leuven - Department Materials Engineering , Belgium
    K11:00 - 11:30 | Synthesis of Advanced Multicomponent Nitride-Based Ceramics from Single-Source PrecursorsRalf RIEDEL, Institute of Materials Science, TU Darmstadt, Darmstadt, Germany
    Wei LI, Institute of Materials Science, TU Darmstadt, Darmstadt, Germany
    Jan BERNAUER, Institute of Materials Science, TU Darmstadt, Darmstadt, Germany
    Laura FELDMANN, Institute of Materials Science, TU Darmstadt, Darmstadt, Germany

    person_pinWei LI, Institute of Materials Science, TU Darmstadt, Darmstadt, Germany
    11:30 - 11:45 | Effect of colloidally dispersed additions of transition metals on the sintering behavior of WC compositesAntonio Javier SANCHEZ-HERENCIA, Institute for Ceramic and Glass (ICV-CSIC), Madrid, Spain
    Hoseein BESHARATLOO,
    Chirico CATERINA, Institute for Ceramic and Glass (ICV-CSIC), Madrid, Spain
    Begoña FERRARI, Institute for Ceramic and Glass (ICV-CSIC), Madrid, Spain

    person_pinAntonio Javier SANCHEZ-HERENCIA, Institute for Ceramic and Glass (ICV-CSIC), Madrid, Spain
    11:45 - 12:00 | Porous Si3N4-based ceramics by gelcasting forming and self-propagating high-temperature synthesis (SHS)Chang-An WANG, Tsinghua University, Beijing, China

    person_pinChang-An WANG, Tsinghua University, Beijing, China
    12:00 - 12:15 | Advances in carbide and oxycarbide derived carbons obtained from preceramic polymersM. Alejandra MAZO, Ceramics and Glass Institute, Madrid, Spain
    Mª RODRIGUEZ, University of Extremadura, Badajoz, Spain
    Fausto RUBIO, Ceramics and Glass Institute, Madrid, Spain
    Juan RUBIO, Ceramics and Glass Institute, Madrid, Spain

    person_pinM. Alejandra MAZO, Ceramics and Glass Institute, Madrid, Spain
    12:15 - 12:30 | Design, doping strategy and characterization of polymer-derived SiAlONMunni KUMARI, CNRS, Limoges, France

    person_pinMunni KUMARI, CNRS, Limoges, France
    K11:00 - 11:30 | LCM Ceramic 3D Printing: Industrial Standard or Prototyping Technology? Johannes HOMA, Lithoz GmbH, Vienna, Austria
    Martin SCHWENTENWEIN, Lithoz GmbH, Vienna, Austria

    person_pinJohannes HOMA, Lithoz GmbH, Vienna, Austria
    11:30 - 11:45 | Combination of indirect stereolithography and gel casting methods to shape ceramic dental crownsPierre GRIMAUD,
    Fabrice PETIT, BCRC (Belgian Ceramic Research Centre), Mons, Belgium
    Laurent BOILET, BCRC (Belgian Ceramic Research Centre), Mons, Belgium
    Marie LASGORCEIX, CERAMATH - DMP, Maubeuge, France
    Florian JEAN, CERAMATH - DMP, Maubeuge, France
    Anne LERICHE, CERAMATH - DMP, Maubeuge, France
    Pascal LAURENT, CERAMATH - DMP, Maubeuge, France
    Philippe CHAMPAGNE, CERAMATH - DMP, Maubeuge, France

    person_pinPierre GRIMAUD, CERAMATH - DMP, Maubeuge, France; BCRC (Belgian Ceramic Research Centre), Mons, Belgium
    11:45 - 12:00 | Formulation of alumina suspensions focused on defect-free debinding for stereolithography-based additive manufacturingPol BARCELONA, Universitat de Barcelona, Barcelona, Spain
    Jose Antonio PADILLA SÁNCHEZ,
    Mònica MARTÍNEZ LÓPEZ, Universitat de Barcelona, Barcelona, Spain
    Mercè SEGARRA, Universitat de Barcelona, Barcelona, Spain
    Elena XURIGUERA, Universitat de Barcelona, Barcelona, Spain

    person_pinPol BARCELONA, Universitat de Barcelona, Barcelona, Spain
    12:00 - 12:15 | Highly loaded Ceramic Slurries for Lithography based Ceramic ManufacturingSeema NEGI, IIT Bombay, Mumbai, India
    Parag BHARGAVA, IIT Bombay, Mumbai, India
    Prasanna S. GANDHI, IIT Bombay, Mumbai, India

    person_pinSeema NEGI, IIT Bombay, Mumbai, India
    12:15 - 12:30 | Latest advances in lithography-based additive manufacturing of non-oxide ceramics  Martin SCHWENTENWEIN, Lithoz GmbH, Vienna, Austria
    Abhijeet LALE, Lithoz GmbH, Vienna, Austria
    Thomas PROCHASKA, Lithoz GmbH, Vienna, Austria

    person_pinMartin SCHWENTENWEIN, Lithoz GmbH, Vienna, Austria
    12:30 - 12:45 | Lithography-based ceramic manufacturing of porosity graded alumina and hydroxyapatite ceramics  Serkan NOHUT,
    Irina KRALEVA, Department of Materials Science, Montanuniversitaet Leoben, Franz Josef Strasse 18, A-8700, Leoben, Austria, Leoben, Austria
    Josef SCHLACHER, Department of Materials Science, Montanuniversitaet Leoben, Franz Josef Strasse 18, A-8700, Leoben, Austria, Leoben, Austria
    Sebastian GEIER, Lithoz GmbH, Mollardgasse 85a/2/64-69, A-1060, Vienna, Austria, Vienna, Austria
    Martin SCHWENTENWEIN, Lithoz GmbH, Mollardgasse 85a/2/64-69, A-1060, Vienna, Austria, Vienna, Austria
    Raul BERMEJO, Department of Materials Science, Montanuniversitaet Leoben, Franz Josef Strasse 18, A-8700, Leoben, Austria, Leoben, Austria

    person_pinSerkan NOHUT, Lithoz GmbH, Mollardgasse 85a/2/64-69, A-1060, Vienna, Austria, Vienna, Austria; Department of Mechanical Engineering, Piri Reis University, 34940, Istanbul, Turkey, Istanbul , Turkey
    HL11:00 - 11:30 | Small scale mechanics of cemented carbides: A combined experimental and numerical approachEmilio JIMÉNEZ PIQUE, Universitat Politècnica de Catalunya, Barcelona, Spain
    Pedro SOUSA-MACHADO, Universitat Politècnica de Catalunya, Barcelona, Spain
    Laia ORTIZ-MEMBRADO, Universitat Politècnica de Catalunya, Barcelona, Spain
    Ferhun CANER, Universitat Politècnica de Catalunya, Barcelona, Spain
    Luis LLANES, Universitat Politècnica de Catalunya, Barcelona, Spain

    person_pinEmilio JIMÉNEZ PIQUE, Universitat Politècnica de Catalunya, Barcelona, Spain
    11:30 - 11:45 | High-speed nanoindentation of WC hardmetals: Extraction of  properties by statistical analysis and correlation with microstructureLaia ORTIZ MEMBRADO, Department of Materials Science and Engineering, EEBE, Universitat Politècnica de Catalunya, Barcelona, Spain
    Raul BENITEZ, Research Centre for Biomedical Engineering (CREB), EEBE, Universitat Politècnica de Catalunya, Barcelona, Spain
    Luis LLANES, Department of Materials Science and Engineering, EEBE, Universitat Politècnica de Catalunya, Barcelona, Spain
    Emilio JIMÉNEZ PIQUÉ, Department of Materials Science and Engineering, EEBE, Universitat Politècnica de Catalunya, Barcelona, Spain

    person_pinLaia ORTIZ MEMBRADO, Department of Materials Science and Engineering, EEBE, Universitat Politècnica de Catalunya, Barcelona, Spain
    11:45 - 12:00 | WC-based composites made from WC/Ti powder mixtures using HEBM-SPS as alternative for WC-Co cemented carbidesDariusz GARBIEC, Łukasiewicz Research Network – Poznań Institute of Technology, Poznan, Poland
    Jakub WISNIEWSKA, Łukasiewicz Research Network – Poznań Institute of Technology, Poznan, Poland
    Wiktoria KRZYZANIAK, Łukasiewicz Research Network – Poznań Institute of Technology, Poznan, Poland
    Grzegorz ADAMEK, Poznan University of Technology, Institute of Materials Science and Engineering, Poznan, Poland

    person_pinDariusz GARBIEC, Łukasiewicz Research Network – Poznań Institute of Technology, Poznan, Poland
    12:00 - 12:15 | Different surface integrity states by post-processing techniques applied on WC-Co cemented carbide materialGuiomar RIU PERDRIX,
    Luis Miguel LLANES PITARCH, CIEFMA - Department of Materials Science and Engineering - Universitat politécnica de Catalunya (EEBE), Barcelona, Spain
    Joan Josep ROA ROVIRA, Steros GPA Innovative SL, Barcelona, Spain

    person_pinGuiomar RIU PERDRIX, CIEFMA - Department of Materials Science and Engineering - Universitat politécnica de Catalunya (EEBE), Barcelona, Spain; Steros GPA Innovative SL, Barcelona, Spain
    12:15 - 12:30 | Surface transformation of TiC-316L cermets by boridingKevin PLUCKNETT, Dalhousie University, Halifax, Canada
    Danielle GRIFFIN, Dalhousie University, Halifax, Canada
    Ayumi KIMURA, University of Tokyo, Tokyo, Japan
    Owen CRAIG, Dalhousie University, Halifax, Canada
    M MORITA, University of Tokyo, Tokyo, Japan
    Marciel GAIER, Dalhousie University, Halifax, Canada
    Hua-Tay LIN, Guangdong University of Technology, Guangzhou, China
    Takehito SEKI, University of Tokyo, Tokyo, Japan

    person_pinKevin PLUCKNETT, Dalhousie University, Halifax, Canada
    12:30 - 12:45 | Development of UO2-Mo Composite Nuclear Fuel Pellets with Enhanced Thermal ConductivityDong Seok KIM, Korea Atomic Energy Research Institute, Daejeon, Korea (Republic of)
    Dong-Joo KIM, Korea Atomic Energy Research Institute, Daejeon, Korea (Republic of)
    Jae Ho YANG, Korea Atomic Energy Research Institute, Daejeon, Korea (Republic of)
    Heung Soo LEE, Korea Atomic Energy Research Institute, Daejeon, Korea (Republic of)
    Ji-Hae YOON, Korea Atomic Energy Research Institute, Daejeon, Korea (Republic of)
    Ji Hwan LEE, Korea Atomic Energy Research Institute, Daejeon, Korea (Republic of)

    person_pinDong Seok KIM, Korea Atomic Energy Research Institute, Daejeon, Korea (Republic of)
    12:45 - 13:00 | Interface quality of new metal-ceramic assembly co-sintered by SPS for power electronic applicationsRomain RAISSON, CIRIMAT-LGP-UPPA, Pau, France
    Sophie GUILLEMET-FRITSCH, CIRIMAT, Toulouse, France
    Pascal DUFOUR, CIRIMAT, Toulouse, France
    Paul-Etienne VIDAL, LGP, Tarbes, France
    Donatien MARTINEAU, SAFRAN TECH, Châteaufort, France
    Philippe LASSERRE, DEEP CONCEPT, PAU, France

    person_pinRomain RAISSON, CIRIMAT-LGP-UPPA, Pau, France
    K11:00 - 11:30 | Will UHTCs and composites be enabling solutions for harsh environments?Diletta SCITI, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics, Faenza, Italy
    Luca ZOLI, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics, Faenza, Italy
    Laura SILVESTRONI, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics, Faenza, Italy
    Frederic MONTEVERDE, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics, Faenza, Italy
    Pietro GALIZIA, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics, Faenza, Italy
    Simone FAILLA, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics, Faenza, Italy
    Antonio VINCI, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics, Faenza, Italy

    person_pinDiletta SCITI, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics, Faenza, Italy
    11:30 - 11:45 | Processing CMCs With Controlled and Variable Matrix CompositionVinothini VENKATACHALAM, School of Metallurgy and Materials, University of Birmingham, Birmingham, United Kingdom
    Jon BINNER, School of Metallurgy and Materials, University of Birmingham, Birmingham, United Kingdom

    person_pinVinothini VENKATACHALAM, School of Metallurgy and Materials, University of Birmingham, Birmingham, United Kingdom
    11:45 - 12:00 | Processing and characterization of UHTCMCs via water based slurry impregnation and mild polymer infiltration and pyrolysis Francesca SERVADEI, CNR-ISSMC (former ISTEC), Faenza, Italy
    Luca ZOLI, CNR-ISSMC (former ISTEC), Faenza, Italy
    Pietro GALIZIA, CNR-ISSMC (former ISTEC), Faenza, Italy
    Diletta SCITI, CNR-ISSMC (former ISTEC), Faenza, Italy

    person_pinFrancesca SERVADEI, CNR-ISSMC (former ISTEC), Faenza, Italy
    12:00 - 12:15 | Manufacturing of layered UHTCMCs using pliable, short fibre-reinforced ceramic sheetsMatteo MOR, CNR-ISSMC, Faenza, Italy
    Antonio VINCI, CNR-ISSMC, Faenza, Italy
    Simone FAILLA, CNR-ISSMC, Faenza, Italy
    Pietro GALIZIA, CNR-ISSMC, Faenza, Italy
    Luca ZOLI, CNR-ISSMC, Faenza, Italy
    Diletta SCITI, CNR-ISSMC, Faenza, Italy

    person_pinMatteo MOR, CNR-ISSMC, Faenza, Italy
    12:15 - 12:30 | Development and Adaptation of UHTCMCs via Reactive Melt Infiltration of boron and zirconium diboride containing preformsLuis BAIER, German Aerospace Center , Stuttgart, Germany
    Linda KLOPSCH, German Aerospace Center , Stuttgart, Germany

    person_pinLuis BAIER, German Aerospace Center , Stuttgart, Germany
    12:30 - 12:45 | Effects of surface roughness and atmosphere on wetting of HfB2-ZrB2 based composites using a powder-based methodShipra BAJPAI, Indian Institute of Technology Kanpur, Kanpur, India
    Kunwar Pratap SINGH , Indian Institute of Technology Kanpur, Kanpur, India
    Anish UPADHYAYA, Indian Institute of Technology Kanpur, Kanpur, India
    T. VENKATESWARAN, Vikram Sarabhai Space Centre, , Thiruvananthapuram , India
    Kantesh BALANI, Indian Institute of Technology Kanpur, Kanpur, India

    person_pinShipra BAJPAI, Indian Institute of Technology Kanpur, Kanpur, India
    12:45 - 13:00 | Structure and properties of ZrB2- and HfB2– based ultrahigh temperature ceramics sintered under high pressureTetiana PRIKHNA,
    Anastasiya LOKATKINA, V. Bakul Institute for Superhard Materials of the National Academy of Sciences of Ukraine, Avtozavodska Str., 2, Kyiv 04074, Ukraine, Kyiv, Ukraine
    Myroslav KARPETS,
    Richard HABER, Department of Materials Science and Engineering, Rutgers, The State University of New Jersey, Piscataway, NJ 08854, USA, Piscataway, United States
    Bernd BÜCHNER, Leibniz-Institut für Festkörper- und Werkstoffforschung Dresden e. V. Helmholtzstraße 20, 01069 Dresden, Germany, Dresden, Germany
    Werner JOCHEN, Leibniz-Institut für Festkörper- und Werkstoffforschung Dresden e. V. Helmholtzstraße 20, 01069 Dresden, Germany, Dresden, Germany
    Julia HUFENBACH, Leibniz-Institut für Festkörper- und Werkstoffforschung Dresden e. V. Helmholtzstraße 20, 01069 Dresden, Germany, Dresden, Germany
    Robert KLUGE, Leibniz-Institut für Festkörper- und Werkstoffforschung Dresden e. V. Helmholtzstraße 20, 01069 Dresden, Germany, Dresden, Germany
    Viktor MOSHCHIL, V. Bakul Institute for Superhard Materials of the National Academy of Sciences of Ukraine, Avtozavodska Str., 2, Kyiv 04074, Ukraine, Kyiv, Ukraine
    Pavel BARVITSKYI, V. Bakul Institute for Superhard Materials of the National Academy of Sciences of Ukraine, Avtozavodska Str., 2, Kyiv 04074, Ukraine, Kyiv, Ukraine
    Anatolii BONDAR, Frantsevich Institute for Problems of Material Sciences of the National Academy of Sciences of Ukraine, Krzhizhanovsky Str., 3, 03142 Kyiv, Ukraine, Kyiv, Ukraine
    Olexander BORIMSKYI, V. Bakul Institute for Superhard Materials of the National Academy of Sciences of Ukraine, Avtozavodska Str., 2, Kyiv 04074, Ukraine, Kyiv, Ukraine
    Leonid DEVIN, V. Bakul Institute for Superhard Materials of the National Academy of Sciences of Ukraine, Avtozavodska Str., 2, Kyiv 04074, Ukraine, Kyiv, Ukraine
    Semyon PONOMARYOV, Institute of Semiconductor Physics of the National Academy of Sciences of Ukraine , 41, Nauky Ave., 03028 Kyiv, Ukraine, Kyiv, Ukraine

    person_pinTetiana PRIKHNA, V. Bakul Institute for Superhard Materials of the National Academy of Sciences of Ukraine, Avtozavodska Str., 2, Kyiv 04074, Ukraine, Kyiv, Ukraine; Leibniz-Institut für Festkörper- und Werkstoffforschung Dresden e. V. Helmholtzstraße 20, 01069 Dresden, Germany, Dresden, Germany
    HL11:00 - 11:30 | CERAMIC WASTE RECYCLING IN THE INDUSTRY  Tiphaine BAZIN, Valoref, Bollène, France
    Thibaut CHUFFART, Valoref, Bollène, France
    Bruno DORIER, Valoref, Bollène, France

    person_pinTiphaine BAZIN, Valoref, Bollène, France
    11:30 - 11:45 | Reduction of CO2 emission in the whiteware wall tiles industrySophie CAILLIET, Imerys, Toulouse, France
    Mirella AZAR,
    Cédric POILLY, Imerys, Aixe-sur-Vienne, France
    Enrique SÁNCHEZ, Instituto de Tecnología Cerámica (ITC), Universitat Jaume I (UJI), Castellón, Spain
    Vicente SANZ, Instituto de Tecnología Cerámica (ITC), Universitat Jaume I (UJI), Castellón, Spain
    Javier CASTELLANO, Instituto de Tecnología Cerámica (ITC), Universitat Jaume I (UJI), Castellón, Spain

    person_pinMirella AZAR,
    11:45 - 12:00 | Ceramic recovery of construction and demolition waste classified by spectroscopy and chemometricsSonia MARÍN-CORTÉS, Glass and Ceramic Institute, ICV - CSIC, Kelsen 5, 29049, Madrid, Spain
    María FERNÁNDEZ-ÁLVAREZ,
    Alberto MOURE, Glass and Ceramic Institute, ICV - CSIC, Kelsen 5, 29049, Madrid, Spain
    José Francisco FERNÁNDEZ, Glass and Ceramic Institute, ICV - CSIC, Kelsen 5, 29049, Madrid, Spain
    Esther ENRÍQUEZ, Institute of Optics "Daza de Valdés“, IO - CSIC Serrano 121, 28006 , Madrid , Spain

    person_pinSonia MARÍN-CORTÉS, Glass and Ceramic Institute, ICV - CSIC, Kelsen 5, 29049, Madrid, Spain
    12:00 - 12:15 | Ceramic-based Pd catalyst-loaded catalytic converter for NRMM exhaust systemOwais AQTASH, University of Szeged, Szeged, Hungary

    person_pinOwais AQTASH, University of Szeged, Szeged, Hungary
    12:15 - 12:30 | Ba0.92Ca0.08Ti0.95Zr0.05O3  Lead-free Ceramic for Piezoelectric Energy HarvestingAna Cristina HERNÁNDEZ-MORENO,
    Armando REYES-MONTERO, Instituto de Investigaciones en Materiales-UNAM, CDMX, Mexico
    Brenda CARREÑO-JIMÉNEZ,
    Mónica ACUAUTLA, Faculty of Science and Engineering, University of Groningen, Groningen, Netherlands
    Lorena PARDO, Instituto de Ciencia de Materiales de Madrid-CSIC, Madrid, Spain

    person_pinArmando REYES-MONTERO, Instituto de Investigaciones en Materiales-UNAM, CDMX, Mexico
    12:30 - 12:45 | Carbon-Free Ammonia Combustion for Industrial Fabrication of Ceramic TilesYi-Bing CHENG, FOSHAN XIANHU LABORATORY, FOSHAN CITY, China

    person_pinYi-Bing CHENG, FOSHAN XIANHU LABORATORY, FOSHAN CITY, China
    K11:00 - 11:30 | Structural control of crystallization in sodium and alumina-rich high level nuclear waste glassesAshutosh GOEL, Rutgers, The State University of New Jersey, Piscataway, United States
    Ambar DESHKAR, Rutgers, The State University of New Jersey, Piscataway, United States
    Yingcheng ZHANG, Rutgers, The State University of New Jersey, Piscataway, United States
    Ping LU,
    Randall YOUNGMAN, Corning Incorporated, Painted Post, United States
    Pierre FLORIAN, CNRS, Orleans, France
    Gregory TRICOT, University of Lille, Lille, France
    John MCCLOY, Washington State University, Pullman, United States
    Albert KRUGER, U.S. Department of Energy, Office of River Protection, Richland, United States

    person_pinAshutosh GOEL, Rutgers, The State University of New Jersey, Piscataway, United States
    11:30 - 11:45 | 3D Mapping of Glass Indentation Stress FieldsAmanda BELLAFATTO, Colorado School of Mines, Lakewood, United States
    Ivar REIMANIS, Colorado School of Mines, Lakewood, United States

    person_pinAmanda BELLAFATTO, Colorado School of Mines, Lakewood, United States
    11:45 - 12:00 | Development of new transparent ceramics for laser applications in the 1.7 – 2.7 µm windowRenaud VALOIS, CEMHTI CNRS UPR 3079, Orléans, France
    Mathieu ALLIX, CEMHTI CNRS UPR 3079, Orléans, France
    Michael PITCHER, CEMHTI CNRS UPR 3079, Orléans, France
    Emmanuel VÉRON, CEMHTI CNRS UPR 3079, Orléans, France
    Véronique JUBERA, ICMCB CNRS UMR5026, Bordeaux, France

    person_pinRenaud VALOIS, CEMHTI CNRS UPR 3079, Orléans, France
    12:00 - 12:15 | Amorphous states of alkali phosphates obtained through high-energy ball milling: how different are they from the glassy state? Jose F. SCHNEIDER,

    person_pinJose F. SCHNEIDER, Universidade de São Paulo, São Carlos, Brazil; Center for Research, Technology and Education in Vitreous Materials, São Carlos, Brazil
    12:15 - 12:30 | A prediction-guided glass-crystallisation strategy for the isolation of new crystalline compounds: SrO-Al2O3-SiO2 as a test caseMichael PITCHER, CEMHTI CNRS UPR3079, Orléans, France
    Chris COLLINS, University of Liverpool, Liverpool, United Kingdom
    Euan DUNCAN, CEMHTI CNRS UPR3079, Orléans, France
    Amandine RIDOUARD, CEMHTI CNRS UPR3079, Orléans, France
    Franck FAYON, CEMHTI CNRS UPR3079, Orléans, France
    Emmanuel VERON, CEMHTI CNRS UPR3079, Orléans, France
    Cécile GENEVOIS, CEMHTI CNRS UPR3079, Orléans, France
    Mathieu ALLIX, CEMHTI CNRS UPR3079, Orléans, France

    person_pinMichael PITCHER, CEMHTI CNRS UPR3079, Orléans, France
    K11:00 - 11:30 | FLAIR: A New Research Center on Fermi Level Engineering of Oxide Electroceramics  Andreas KLEIN, Technical University of Darmstadt, Darmstadt, Germany

    person_pinAndreas KLEIN, Technical University of Darmstadt, Darmstadt, Germany
    11:30 - 11:45 | Band Gap Tailoring in Doped Alkaline-Earth Hexaborides: Advanced Materials for Neutron Detection ApplicationsAlan HIRALES, University of California San Diego, La Jolla, United States
    Roxana MORTON, University of Nevada, Reno, Reno, United States
    Victor R. VASQUEZ, University of Nevada, Reno, Reno, United States
    Olivia A. GRAEVE, University of California San Diego, La Jolla, United States

    person_pinAlan HIRALES, University of California San Diego, La Jolla, United States
    11:45 - 12:00 | Dielectric Relaxation, Local Structure and Lattice Dynamics in Mn-Doped Potassium Tantalate CeramicsAlexander TKACH, Department of Materials and Ceramic Engineering, CICECO–Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    Igor LEVIN, Materials Measurement Science Division, National Institute of Standards and Technology, Gaithersburg, MD, United States
    Joseph C. WOICIK , Materials Measurement Science Division, National Institute of Standards and Technology, Gaithersburg, MD, United States
    Abilio ALMEIDA, Department of Physics of Science Faculty, IFIMUP, University of Porto, Porto, Portugal
    Paula M. VILARINHO, Department of Materials and Ceramic Engineering, CICECO–Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal

    person_pinAlexander TKACH, Department of Materials and Ceramic Engineering, CICECO–Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    12:00 - 12:15 | Effect of Defect Dynamics on Reliability of Base Metal Electrode Multilayer Ceramic CapacitorPedram YOUSEFIAN, Penn State University, University Park, United States
    Clive RANDALL, Penn State University, University Park, United States

    person_pinPedram YOUSEFIAN, Penn State University, University Park, United States
    12:15 - 12:30 | Analysis of dielectric properties of alumina ceramics as a function of surface and porosity ?Alexander SCHUSTER, Hochschule Koblenz, Höhr-Grenzhausen, Germany
    Josef SCHULZ, Hochschule Koblenz, Höhr-Grenzhausen, Germany
    Priscilla CAMARGOS MACIEIRA , Hochschule Koblenz, Höhr-Grenzhausen, Germany
    Antje LIERSCH, Hochschule Koblenz, Höhr-Grenzhausen, Germany

    person_pinAlexander SCHUSTER, Hochschule Koblenz, Höhr-Grenzhausen, Germany
    12:30 - 12:45 | Ultra-low thermal conductivity in scheelite ceramicsHicham AIT LAASRI, GREMAN UMR7347, Blois, France
    Eliane BSAIBESS, GREMAN UMR7347, Blois, France
    Damien BRAULT, GREMAN UMR7347, Blois, France
    Guillaume NATAF, GREMAN UMR7347, Blois, France
    Fabian DELORME, GREMAN UMR7347, Blois, France
    Fabien GIOVANNELLI, GREMAN UMR7347, Blois, France

    person_pinHicham AIT LAASRI, GREMAN UMR7347, Blois, France
    HL11:00 - 11:30 | Research and development of II-VI transparent ceramics  Yiquan WU, New York State College of Ceramics, Alfred University , Alfred , United States

    person_pinYiquan WU, New York State College of Ceramics, Alfred University , Alfred , United States
    11:30 - 11:45 | Study of Gd3NbO7:Eu3+ phase transition: toward the elaboration of new transparent ceramic as infrared LASER sources  Louis CORNET,
    Rémy BOULESTEIX, IRCer, Limoges, France
    Jean-Marc HEINTZ, ICMCB , Bordeaux , France
    Alexandre MAITRE, IRCer, Limoges, France
    Véronique JUBERA, ICMCB , Bordeaux , France

    person_pinLouis CORNET, ICMCB , Bordeaux , France; IRCer, Limoges, France
    11:45 - 12:00 | Optical and mechanical performances of IR transparent CaLa2S4 ceramicsGuillaume R. DURAND, Solcera Advanced Materials, 27000 Évreux, France
    Lucile LALLEMANT, Solcera Advanced Materials, 27000 Évreux, France
    Christophe COUREAU, Solcera Advanced Materials, 27000 Évreux, France
    Antoine GAUTIER , Univ. Rennes, CNRS, ISCR (Institut des Sciences Chimiques de Rennes) - UMR 6226, 35000 Rennes, France
    Thierry JOUAN, Univ. Rennes, CNRS, ISCR (Institut des Sciences Chimiques de Rennes) - UMR 6226, 35000 Rennes, France
    Xianghua ZHANG, Univ. Rennes, CNRS, ISCR (Institut des Sciences Chimiques de Rennes) - UMR 6226, 35000 Rennes, France
    Catherine BOUSSARD, Univ. Rennes, CNRS, ISCR (Institut des Sciences Chimiques de Rennes) - UMR 6226, 35000 Rennes, France
    Odile MERDRIGNAC-CONANEC, Univ. Rennes, CNRS, ISCR (Institut des Sciences Chimiques de Rennes) - UMR 6226, 35000 Rennes, France

    person_pinGuillaume R. DURAND, Solcera Advanced Materials, 27000 Évreux, France
    12:00 - 12:15 | Effect of   inversion degree   on the   optical spectra of transition element doped  spinel lattice  transparent ceramic hostsAdrian GOLDSTEIN, CERAMOSAURUS REX, HAIFA, Israel
    Guangran ZHANG, N Y state college of ceramics, Alfred university, Alfred , United States
    Yquan WU, N Y state college of ceramics, Alfred university, Alfred , United States
    Alexander SHAMES, Department of physics, Ben-Gurion University, Beer Sheva, Israel

    person_pinAdrian GOLDSTEIN, CERAMOSAURUS REX, HAIFA, Israel
    12:15 - 12:30 | Processing and properties of infrared transparent (oxy)sulfide ceramics  Odile MERDRIGNAC-CONANEC, Univ Rennes, CNRS, ISCR - UMR 6226, F-35000, Rennes, France, Rennes, France
    Guillaume DURAND,
    Alexandre LE COZ, Univ Rennes, CNRS, ISCR - UMR 6226, F-35000, Rennes, France, Rennes, France
    Christophe CHLIQUE, Univ Rennes, CNRS, ISCR - UMR 6226, F-35000, Rennes, France, Rennes, France
    Noha HAKMEH, Univ Rennes, CNRS, ISCR - UMR 6226, F-35000, Rennes, France, Rennes, France
    Fabrice CÉLARIÉ, Univ Rennes, CNRS, IPR - UMR 6251, F-35000, Rennes, France, Rennes, France
    Thierry JOUAN, Univ Rennes, CNRS, ISCR - UMR 6226, F-35000, Rennes, France, Rennes, France
    Antoine GAUTIER, Univ Rennes, CNRS, ISCR - UMR 6226, F-35000, Rennes, France, Rennes, France
    François CHEVIRÉ, Univ Rennes, CNRS, ISCR - UMR 6226, F-35000, Rennes, France, Rennes, France
    Catherine BOUSSARD, Univ Rennes, CNRS, ISCR - UMR 6226, F-35000, Rennes, France, Rennes, France
    Xianghua ZHANG, Univ Rennes, CNRS, ISCR - UMR 6226, F-35000, Rennes, France, Rennes, France

    person_pinOdile MERDRIGNAC-CONANEC, Univ Rennes, CNRS, ISCR - UMR 6226, F-35000, Rennes, France, Rennes, France
    12:30 - 12:45 | Study of sintering and dopant distribution in Cr4+:YAG transparent ceramics and its use as passively Q-switching media in IR LaserRémy BOULESTEIX, Univ. Limoges, limoges, France
    Alexandre MAÎTRE, Univ. Limoges, limoges, France
    Camille PERRIÈRE, SOLCERA, Evreux, France
    Benjamin FORESTIER, CILAS, Orléans, France
    Jean-Eucher MONTAGNE, CILAS, Orléans, France
    Alain BRENIER, ILM, Lyon, France

    person_pinRémy BOULESTEIX, Univ. Limoges, limoges, France
    K11:00 - 11:30 | New insights into the fuel electrode degradation during solid oxide cells operation  Muhammad Shirjeel KHAN, Institute of Energy and Climate Research (IEK-1), Forschungszentrum Juelich, Juelich, Germany
    Christian LENSER, Institute of Energy and Climate Research (IEK-1), Forschungszentrum Juelich, Juelich, Germany
    Christian DELLEN, Institute of Energy and Climate Research (IEK-1), Forschungszentrum Juelich, Juelich, Germany
    Doris SEBOLD, Institute of Energy and Climate Research (IEK-1), Forschungszentrum Juelich, Juelich, Germany
    Yoo Jung SOHN, Institute of Energy and Climate Research (IEK-1), Forschungszentrum Juelich, Juelich, Germany
    Egbert WESSEL, Institute of Energy and Climate Research (IEK-2), Forschungszentrum Juelich, Juelich, Germany
    Norbert H. MENZLER, Institute of Energy and Climate Research (IEK-1), Forschungszentrum Juelich, Juelich, Germany

    person_pinMuhammad Shirjeel KHAN, Institute of Energy and Climate Research (IEK-1), Forschungszentrum Juelich, Juelich, Germany
    11:30 - 11:45 | GeO2 Incorporated Li1.5Al0.5Ti1.5(PO4)3 Electrolyte for High Performance Solid State Lithium Ion BatteriesSeulgi SHIN, Kwangwoon University, Seoul, Korea (Republic of)
    Sung Hyun KANG, Kwangwoon University, Seoul, Korea (Republic of)
    Geon-Hee KIM, Gyeonsang National University, Jinju, Korea (Republic of)
    Do Yeon KIM, Kwangwoon University, Seoul, Korea (Republic of)
    Sang-Mo KOO, Kwangwoon University, Seoul, Korea (Republic of)
    Kyoung-Seok MOON, Gyeonsang National University, Jinju, Korea (Republic of)
    Weon Ho SHIN, Kwangwoon University, Seoul, Korea (Republic of)

    person_pinSeulgi SHIN, Kwangwoon University, Seoul, Korea (Republic of)
    11:45 - 12:00 | Polymer derived SiOC/Sn nanocomposites from a low-cost single source precursor as anode materials for lithium storage applicationsNatalia KOVALSKA, Empa, Dübendorf , Switzerland
    Gurdial BLUGAN, Empa, Dübendorf , Switzerland
    Matthias KOEBEL, Siloxene AG, Wangen-Bruttisellen, Switzerland

    person_pinNatalia KOVALSKA, Empa, Dübendorf , Switzerland
    12:00 - 12:15 | “Polymer-in-ceramic” hybrid electrolytes based on NASICON porous ceramic for all-solid state sodium ion batteriesJohanna M. NARANJO-BALSECA, UNIVERSIDAD CARLOS III DE MADRID, LEGANES, Spain
    Cynthia S. MARTINEZ-CISNEROS, UNIVERSIDAD CARLOS III DE MADRID, LEGANES, Spain
    Bidhan PANDIT, UNIVERSIDAD CARLOS III DE MADRID, LEGANES, Spain
    Belen LEVENFELD, UNIVERSIDAD CARLOS III DE MADRID, LEGANES, Spain
    Jean-Yves SANCHEZ, UNIVERSIDAD CARLOS III DE MADRID, LEGANES, Spain
    Alejandro VAREZ, UNIVERSIDAD CARLOS III DE MADRID, LEGANES, Spain

    person_pinCynthia S. MARTINEZ-CISNEROS, UNIVERSIDAD CARLOS III DE MADRID, LEGANES, Spain
    12:15 - 12:30 | Preparation of niobium pentoxide nanofibers by reactive needleless electrospinningIvan SHEPA, The Institute of Materials Research of SAS, Slovak Academy of Sciences, Košice, Slovakia
    Erika MUDRA , The Institute of Materials Research of SAS, Slovak Academy of Sciences, Košice, Slovakia
    Dominika CAPKOVA , Department of Physical Chemistry, Institute of Chemistry, Faculty of Science, Pavol Jozef Šafárik University, Košice, Slovakia
    Alexandra KOVALCIKOVA, The Institute of Materials Research of SAS, Slovak Academy of Sciences, Košice, Slovakia
    Ondrej PETRUS, The Institute of Materials Research of SAS, Slovak Academy of Sciences, Košice, Slovakia
    Frantisek KROMKA, The Institute of Materials Research of SAS, Slovak Academy of Sciences, Košice, Slovakia
    Ondrej MILKOVIC, The Institute of Materials Research of SAS, Slovak Academy of Sciences, Košice, Slovakia
    Vitaliy ANTAL, Institute of Experimental Physics, Slovak Academy of Sciences, Slovak Academy of Sciences, Košice, Slovakia
    Matej BALAZ, Institute of Geotechnics, Slovak Academy of Sciences, Košice, Slovakia
    Maksym LISNICHUK ,
    Dominika MARCIN-BEHUNOVA , Institute of Geotechnics, Slovak Academy of Sciences, Košice, Slovakia
    Jan DUSZA, The Institute of Materials Research of SAS, Slovak Academy of Sciences, Košice, Slovakia

    person_pinIvan SHEPA, The Institute of Materials Research of SAS, Slovak Academy of Sciences, Košice, Slovakia
    11:00 - 11:30 | Advances in Photon-harvesting Technologies for Perovskite Absorbers and Water Splitting Reactions  Sanjay MATHUR, University of Cologne, Cologne, Germany

    person_pinSanjay MATHUR, University of Cologne, Cologne, Germany
    11:30 - 12:00 | High Entropy Perovskites for Green Hydrogen Generation/UtilizationXingbo LIU, West Virginia University, Morgantown, United States

    person_pinXingbo LIU, West Virginia University, Morgantown, United States
    12:00 - 12:30 | Self-supported electrocatalysts of tantalum-based nitrides developed through precursor derived route for hydrogen evolutionKumar RAVI , Indian Institute of Technology Madras, Chennai, India
    Raghunath Sharma MUKKAVILLI , Indian Institute of Technology Madras, Chennai, India
    Ganesh Babu THIYAGARAJAN, Indian Institute of Technology Madras, Chennai, India
    Arunkumar B R, Indian Institute of Technology Madras, Chennai, India
    David GRAF, University of Cologne, Cologne, Germany
    Thomas FISCHER, University of Cologne, Cologne, Germany
    Michael WILHELM, University of Cologne, Cologne, Germany
    Silke CHRISTIANSEN, Fraunhofer IKTS, Dresden, Germany
    Sanjay MATHUR, University of Cologne, Cologne, Germany

    person_pinKumar RAVI , Indian Institute of Technology Madras, Chennai, India
    12:30 - 13:00 | Advances and Challenges to the Manufacturing of Electroceramics with Cold SinteringClive RANDALL, The Pennsylvania State University, United States

    person_pinClive RANDALL, The Pennsylvania State University, United States
    14:30 - 14:50 | Reactive magnesia-based composites: the pursuit of green constructionAnna-Marie LAUEMANNOVA, UCT Prague, Czech Republic

    person_pinAnna-Marie LAUEMANNOVA, UCT Prague, Czech Republic
    14:50 - 15:10 | Local Thermal Characterisation of Ceramic Coated Nuclear Fuel ParticlesEleanor WHITE, University of Bristol, UNITED KINGDOM

    person_pinEleanor WHITE, University of Bristol, UNITED KINGDOM
    15:10 - 15:30 | Development and potentiality of binder jetting of structural and functional ceramicsMarco MARIANI, Dipartimento di Meccanica, ITALY

    person_pinMarco MARIANI, Dipartimento di Meccanica, ITALY
    15:30 - 15:50 | Production and properties of potassium-sodium niobate (KNN) ceramics by different advanced sintering techniquesLevent KARACASULU,
    Mattia BIESUZ,
    Vincenzo SGLAVO,
    Cekdar VAKIFAHMETOGLU, Izmir Institute of Technology, Izmir, Turkey

    person_pinLevent KARACASULU, Izmir Institute of Technology, Izmir, Turkey;
    15:50 - 16:10 | Magnetic Fe-doped Calcium Phosphates: versatile materials for multifunctional applicationsTania S. S. CARVALHO, Materials and Ceramics Eng. Dept. - University of Aveiro, Aveiro, Portugal

    person_pin
    16:10 - 16:30 | MOF-based core-shell structures nanofiltration membranes for water purificationXinxin CHEN, Aalborg University, Department of chemistry and Bioscience, DENMARK

    person_pinXinxin CHEN, Aalborg University, Department of chemistry and Bioscience, DENMARK
    14:30 - 14:45 | Vat photopolymerization of metal-functionalized polymer-derived ceramics as catalysts for CO2 methanationThomas KONEGGER, TU Wien, Institute of Chemical Technologies and Analytics, Vienna, Austria
    Johannes ESSMEISTER, TU Wien, Institute of Chemical Technologies and Analytics, Vienna, Austria
    Lisa SCHACHTNER, TU Wien, Institute of Chemical Technologies and Analytics, Vienna, Austria
    Eva SZOLDATITS, TU Wien, Institute of Materials Chemistry, Vienna, Austria
    Antonia LICHTENEGGER, Medical University of Vienna, Center for Medical Physics and Biomedical Engineering, Vienna, Austria
    Bernhard BAUMANN, Medical University of Vienna, Center for Medical Physics and Biomedical Engineering, Vienna, Austria
    Karin FÖTTINGER, TU Wien, Institute of Materials Chemistry, Vienna, Austria

    person_pinThomas KONEGGER, TU Wien, Institute of Chemical Technologies and Analytics, Vienna, Austria
    14:45 - 15:00 | In situ formation of Ni nanoparticles inside a Si-C-N-O(H) ceramic obtained via the PDC route : Possible application for OERMarwan BEN MILED,
    Stéphane CÉLÉRIER, IC2MP, Poitiers, France
    Aurélien HABRIOUX, IC2MP, Poitiers, France
    Olivier MASSON, IRCER, Limoges, France
    Samuel BERNARD, IRCER, Limoges, France

    person_pinMarwan BEN MILED, IRCER, Limoges, France; IC2MP, Poitiers, France
    15:00 - 15:15 | Porous carbon-rich transition metal modified SiCN ceramic nanocomposites for electrochemical water splittingAwin ERANEZHUTH WASAN , University of Bayreuth, Bayreuth, Germany
    Günter MOTZ, University of Bayreuth, Bayreuth, Germany

    person_pinAwin ERANEZHUTH WASAN , University of Bayreuth, Bayreuth, Germany
    15:15 - 15:30 | Novel hydrogen chemisorption properties of polymer-derived alkali meal cation-modified amorphous Si-B-N-based ceramic materialShotaro TADA,
    Motoharu TERASHIMA, Department of Life Science and Applied Chemistry, Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan
    Daisuke SHIMIZU, Department of Life Science and Applied Chemistry, Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan
    Asakuma NORIFUMI, Department of Life Science and Applied Chemistry, Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan
    Samuel BERNARD, University of Limoges, CNRS, IRCER, UMR 7315, Limoges, France
    Yuji IWAMOTO, Department of Life Science and Applied Chemistry, Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan

    person_pinShotaro TADA, Ceramic Technologies for Futuristic Mobility (CTFM) Center, Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras, Chennai, India; Department of Life Science and Applied Chemistry, Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan
    15:30 - 15:45 | Hydrogen adsorption/desorption properties of polymer-derived Ni nanocrystallites embedded within amorphous silicon nitrideNorifumi ASAKUMA, Department of Life Science and Applied Chemistry, Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan
    Shotaro TADA,
    Sawao HONDA, Department of Life Science and Applied Chemistry, Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan
    Toru ASAKA, Department of Life Science and Applied Chemistry, Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan
    Tomoyuki TAMURA, Department of Applied Physics, Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan
    Samuel BERNARD, CNRS, IRCER, UMR 7315, University of Limoges, Limoges, France
    Yuji IWAMOTO, Department of Life Science and Applied Chemistry, Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan

    person_pinNorifumi ASAKUMA, Department of Life Science and Applied Chemistry, Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan
    14:30 - 14:45 | Potential for layer-less Additive Manufacturing with liquid precursor feedstocksKai HUANG, Industrial Engineering Department, University of Padova, Padova, Italy
    Anna DE MARZI, Industrial Engineering Department, University of Padova, Padova, Italy
    Paolo COLOMBO, Industrial Engineering Department, University of Padova, Padova, Italy
    Giorgia FRANCHIN, Industrial Engineering Department, University of Padova, Padova, Italy

    person_pinGiorgia FRANCHIN, Industrial Engineering Department, University of Padova, Padova, Italy
    14:45 - 15:00 | Tailoring 3D printed Ceramics via Two-Photon-Polymerization and Lithography-based Ceramic ManufacturingJohanna SÄNGER,
    Anna-Katharina HOFER, Montanuniversity Leoben, Leoben, Austria
    Josef SCHLACHER, Montanuniversity Leoben, Leoben, Austria
    Jens GÜNSTER,
    Raúl BERMEJO, Montanuniversity Leoben, Leoben, Austria

    person_pinJohanna SÄNGER, Montanuniversity Leoben, Leoben, Austria; Federal Institute for Materials Research and Testing (BAM), Berlin, Germany
    15:00 - 15:15 | Laser deposition and sintering for the fabrication of multicomponent microelectronic devices with BaTiO3 as dielectric componentMaria CANILLAS, Centro Laser - Universidad Politécnica de Madrid, Madrid, Spain
    David CANTELI, Centro Laser - Universidad Politécnica de Madrid, Madrid, Spain
    Cristina MUÑOZ, Centro Laser - Universidad Politécnica de Madrid, Madrid, Spain
    Miguel Angel RODRIGUEZ, Instituto de Cerámica y Vidrio (ICV) - Consejo Superior de Investigaciones Científicas (CSIC), Madrid, Spain
    Carlos MOLPECERES, Centro Laser - Universidad Politécnica de Madrid, Madrid, Spain
    Miguel MORALES, Centro Laser - Universidad Politécnica de Madrid, Madrid, Spain

    person_pinMaria CANILLAS, Centro Laser - Universidad Politécnica de Madrid, Madrid, Spain
    15:15 - 15:30 | Laser-based additive manufacturing of aqueous suspensions for fabricating large and dense ceramic components Johannes HOMA, Lithoz GmbH, Vienna, Austria
    Thomas MUEHLER, QEP3D GmbH, Stahnsdorf, Germany
    Yannik ZIEGER, Lithoz GmbH, Vienna, Austria
    Mehdi MOHAMMADI, Lithoz GmbH, Vienna, Austria
    Martin SCHWENTENWEIN, Lithoz GmbH, Vienna, Austria

    person_pinJohannes HOMA, Lithoz GmbH, Vienna, Austria
    15:30 - 15:45 | Qualitative and Quantitative aspects of Tool-Path Planning in Direct Extrusion 3D-Printing of Lunar Soil SimulantDhanashri DESAI, Indian Institute of Science, Bengaluru, India
    Aloke KUMAR, Indian Institute of Science, Bengaluru, India
    Koushik VISWANATHAN, Indian Institute of Science, Bengaluru, India

    person_pinDhanashri DESAI, Indian Institute of Science, Bengaluru, India
    K14:30 - 15:00 | Industrial development of advanced structural ceramics: SiC-fibresAntoine VIARD, BJS Ceramics GmbH, Bayreuth, Germany
    Michael ROTHMANN, BJS Ceramics GmbH, Bayreuth, Germany
    Werner HUMBS, BJS Ceramics GmbH, Bayreuth, Germany

    person_pinAntoine VIARD, BJS Ceramics GmbH, Bayreuth, Germany
    15:00 - 15:15 | Development of next-generation oxidic ceramic fibres for the establishment of value chains within Europe  Lena GLASER, Fraunhofer Institut für Silicatforschung, Zentrum für Hochtemperaturleichtbau, Würzburg, Germany
    Arne RÜDINGER, Fraunhofer Institut für Silicatforschung, Zentrum für Hochtemperaturleichtbau, Würzburg, Germany
    Ralf HERBORN, Fraunhofer Institut für Silicatforschung, Zentrum für Hochtemperaturleichtbau, Würzburg, Germany

    person_pinLena GLASER, Fraunhofer Institut für Silicatforschung, Zentrum für Hochtemperaturleichtbau, Würzburg, Germany
    15:15 - 15:30 | BN film coating on SiC fibre tow by cold wall CVD from triethylamine borane complexPierre FENETAUD, LCTS UMR 5801, CNRS - University of Bordeaux - Safran - CEA, 3 allee de la Boetie, 33600 Pessac, France, PESSAC, France
    Sylvain JACQUES, LCTS UMR 5801, CNRS - University of Bordeaux - Safran - CEA, 3 allee de la Boetie, 33600 Pessac, France, PESSAC, France

    person_pinSylvain JACQUES, LCTS UMR 5801, CNRS - University of Bordeaux - Safran - CEA, 3 allee de la Boetie, 33600 Pessac, France, PESSAC, France
    15:30 - 15:45 | Ceramic coating of short fibers by Fluidized Bed Chemical Vapor DepositionThomas DA CALVA, Laboratoire des Composites ThermoStructuraux, PESSAC, France
    Georges CHOLLON, Laboratoire des Composites ThermoStructuraux, PESSAC, France
    Nathalie BERTRAND, Laboratoire des Composites ThermoStructuraux, PESSAC, France

    person_pinThomas DA CALVA, Laboratoire des Composites ThermoStructuraux, PESSAC, France
    15:45 - 16:00 | Synthesis of silicon carbide precursor block copolymers and study of the surface nanostructuring.Victor PERRAUDIN, IRCER, Limoges, France
    Romain LUCAS, IRCER, Limoges, France
    Sylvie FOUCAUD, IRCER, Limoges, France
    Emeline RENAUDIE, IRCER, Limoges, France
    Guillaume FLEURY, LCPO, Bordeaux, France
    Benjamin CABANNES-BOUÉ, LCPO, Bordeaux, France

    person_pinVictor PERRAUDIN, IRCER, Limoges, France
    16:00 - 16:15 | Crack pattern evolution during the pyrolysis of unidirectional fibre reinforced ceramic matrix compositesFelix WICH, University of Bayreuth - Chair of Ceramic Materials Engineering, Bayreuth, Germany
    Melissa MOOS, University of Bayreuth - Chair of Ceramic Materials Engineering, Bayreuth, Germany
    Nico LANGHOF, University of Bayreuth - Chair of Ceramic Materials Engineering, Bayreuth, Germany
    Michael FLECK, University of Bayreuth - Metals and Alloys, Bayreuth, Germany
    Walter KRENKEL, University of Bayreuth - Chair of Ceramic Materials Engineering, Bayreuth, Germany
    Stefan SCHAFFÖNER, University of Bayreuth - Chair of Ceramic Materials Engineering, Bayreuth, Germany

    person_pinFelix WICH, University of Bayreuth - Chair of Ceramic Materials Engineering, Bayreuth, Germany
    16:15 - 16:30 | Carbon-fiber-reinforced CMCs for high temperatures: processing flexibility and tailored microstructuresMassimiliano VALLE, Petroceramics, Stezzano, Italy
    Lorenzo CAVALLI, Petroceramics, Stezzano, Italy
    Fabio GIACOMETTI, Petroceramics, Stezzano, Italy
    Yasir AKRAM, Petroceramics, Stezzano, Italy
    Matteo BOIOCCHI, Petroceramics, Stezzano, Italy
    Michela CANTÙ, Petroceramics, Stezzano, Italy

    person_pinFabio GIACOMETTI, Petroceramics, Stezzano, Italy
    HL14:30 - 15:00 | A review of bond systems for refractory castablesFrederic LACOUE, IMERYS, Paris, France
    Chris PARR, IMERYS, Paris, France
    Ratana SOTH, IMERYS, Paris, France
    Christoph WÖHRMEYER, IMERYS, Paris, France

    person_pinFrederic LACOUE, IMERYS, Paris, France
    Christoph WÖHRMEYER, IMERYS, Paris, France
    15:00 - 15:15 | Alternative colloidal binders having a high solid content to colloidal silica or alumina for refractory castablesSandra ABDELOUHAB, BCRC, Mons, Belgium
    Charlotte LANG, BCRC, Mons, Belgium
    Cathy DELMOTTE, BCRC, Mons, Belgium
    Veronique VANDENEEDE, BCRC, Mons, Belgium
    Michael THIESEN, Koblenz University of Applied Sciences, Höhr-Grenzhausen, Germany
    Luis IBARRA, Koblenz University of Applied Sciences, Höhr-Grenzhausen, Germany
    Olaf KRAUSE, Koblenz University of Applied Sciences, Höhr-Grenzhausen, Germany
    Erwan BROCHEN, Forschungsgemeinschaft Feuerfest e. V. (FGF) at the European Centre for Refractories (ECREF), Höhr-Grenzhausen, Germany
    Christian DANNERT, Forschungsgemeinschaft Feuerfest e. V. (FGF) at the European Centre for Refractories (ECREF), Höhr-Grenzhausen, Germany

    person_pinSandra ABDELOUHAB, BCRC, Mons, Belgium
    15:15 - 15:30 | Evaluating polycyclic aromatic hydrcarbon-free binders in taphole clays - a possible alternative to coal tar pitch Izak CAMERON, University of Pretoria, Hatfield, Pretoria, South Africa
    Andrie GARBERS-CRAIG, University of Pretoria, Hatfield, Pretoria, South Africa

    person_pinIzak CAMERON, University of Pretoria, Hatfield, Pretoria, South Africa
    15:30 - 15:45 | Lightweight porous ultra-high temperature ceramic with high strength and low thermal conductivityWu ZHEN, Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang , China
    Wang JINGYANG, Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang , China

    person_pinWu ZHEN, Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang , China
    15:45 - 16:00 | MgO-MgAl2O4 Refractories with Low Thermal Conductivity for Energy-saving in Rotary KilnsAkkasoglu UFUK, Kumas Refractories R&D Center, Kutahya, Turkey
    Yanik GORKEM, Kumas Refractories R&D Center, Kutahya, Turkey
    Sarioglu NURI, Kumas Refractories R&D Center, Kutahya, Turkey

    person_pinAkkasoglu UFUK, Kumas Refractories R&D Center, Kutahya, Turkey
    16:00 - 16:15 | Refractory metamaterials for tuning thermal emission at high temperatureSyreina SAYEGH,
    Alima NZIE,
    Mikhael BECHELANY, Institut Européen des Membranes (IEM), UMR 5635, Univ Montpellier, CNRS, ENSCM, Place Eugène Bataillon, 34095, Montpellier, France
    Olivier ROZENBAUM,
    Quentin FLAMANT,

    person_pinQuentin FLAMANT, Saint-Gobain Research Provence, 550 Rue Alphonse Jauffret, 84300, Cavaillon, France; Laboratoire Commun Canopée, CNRS / Université de Lorraine / Saint-Gobain, Orléans / Nancy / Cavaillon / Paris, France
    HL14:30 - 15:00 | No material leak, large-scale (even roll-to-roll), and mold-free near net-shaping of advanced ceramics is possibleAleyna Beste OZHAN, Sabanci University, Istanbul, Turkey
    Isik AREL, Sabanci University, Istanbul, Turkey
    Ayse AY, Sabanci University, Istanbul, Turkey
    Ozge AKBULUT, Sabanci University, Istanbul, Turkey

    person_pinOzge AKBULUT, Sabanci University, Istanbul, Turkey
    15:00 - 15:15 | Bio-based Silicon Carbide Ceramics from Thermoset-Based Wood Polymer CompositesChristian FUERST, Wood K plus - Kompetenzzentrum Holz GmbH, Linz, Austria
    Matthias MIHALIC, Wood K plus - Kompetenzzentrum Holz GmbH, Linz, Austria
    Christopher WALLIS, RHP-Technology GmbH, Seibersdorf, Austria
    Erich NEUBAUER, RHP-Technology GmbH, Seibersdorf, Austria
    Christoph UNTERWEGER, Wood K plus - Kompetenzzentrum Holz GmbH, Linz, Austria

    person_pinChristoph UNTERWEGER, Wood K plus - Kompetenzzentrum Holz GmbH, Linz, Austria
    15:15 - 15:30 | Sr-doped calcium and barium manganites as catalysts in heterogeneous oxidation of volatile organic compoundsAndreja ŽUŽIC, University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, Croatia
    Filip CAR, University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, Croatia
    Jelena MACAN, University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, Croatia
    Vesna TOMAŠI?, University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, Croatia
    Andreja GAJOVIC, Ruđer Bošković Institute, Zagreb, Croatia

    person_pinAndreja ŽUŽIC, University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, Croatia
    15:30 - 15:45 | Fe-doped Pr2Zr2O7 pyrochlore: a promising material for different applicationsEmerson Luiz DOS SANTOS VEIGA, Universidad Jaume I, Castellon, Castellon, Spain
    Héctor BELTRÁN-MIR, Universidad Jaume I, Castellon, Castellon, Spain
    Xavier VENDRELL VILLAFRUELA, Institute of Energy Technologies, Universitat Politècnica de Catalunya, EEBE, Eduard Maristany, Barcelona, Spain
    Jordi LLORCA, Institute of Energy Technologies, Universitat Politècnica de Catalunya, EEBE, Eduard Maristany, Barcelona, Spain
    Eloisa CORDONCILLO, Universidad Jaume I, Castellon, Castellon, Spain

    person_pinHéctor BELTRÁN-MIR, Universidad Jaume I, Castellon, Castellon, Spain
    15:45 - 16:00 | Towards sustainable ?development and use of nanomaterials: understanding environmental transformation of engineered nanoparticlesAlexander KHORT, KTH Royal Institute of Technology, Stockholm, Sweden
    Tingru CHANG, KTH Royal Institute of Technology, Stockholm, Sweden
    Marianne BROOKMAN-AMISSAH, University of Gothenburg, Gothenburg, Sweden
    Jonas HEDBERG, University of Western Ontario, London, Canada
    Eva BLOMBERG, KTH Royal Institute of Technology, Stockholm, Sweden
    Inger ODNEVALL, KTH Royal Institute of Technology, Stockholm, Sweden

    person_pinAlexander KHORT, KTH Royal Institute of Technology, Stockholm, Sweden
    HL14:30 - 15:00 | Design and evaluation of glass-ceramics for nuclear waste immobilizationJohn MCCLOY,

    person_pinJohn MCCLOY,
    15:00 - 15:15 | Effect of kaolin addition on the microstructure and mechanical properties of a glass-ceramic glazeJosé Luís AMORÓS, Instituto de Tecnología Cerámica, Castellón de la Plana, Spain
    Arnaldo MORENO, Instituto de Tecnología Cerámica, Castellón de la Plana, Spain
    Encarna BLASCO, Instituto de Tecnología Cerámica, Castellón de la Plana, Spain
    Carlos FELIU, Instituto de Tecnología Cerámica, Castellón de la Plana, Spain

    person_pinArnaldo MORENO, Instituto de Tecnología Cerámica, Castellón de la Plana, Spain
    15:15 - 15:30 | Structural and physico-chemical properties of selected glasses in the (Ca1-xMgx)O-Al2O3 systemAnatoly ARKHIPIN,
    Alexander PISCH, SIMaP-CNRS, Grenoble, France
    Irina USPENSKAYA, Lomonosov Moscow State University, Moscow, Russian Federation
    Noel JAKSE, SIMaP-CNRS, Grenoble, France
    Semen KUZOVCHIKOV, Thermochemistry of Materials SRC, NUST MISIS, Moscow, Russian Federation
    Alexandra KHVAN,
    Daniel NEUVILLE, IPGP-CNRS, Paris, France

    person_pinAnatoly ARKHIPIN, University Grenoble Alpes, Grenoble, France; Lomonosov Moscow State University, Moscow, Russian Federation
    15:30 - 15:45 | Preparation of hierarchically porous phase separated foam glasses  Martin SEDLACIK, Brno University of Technology, Brno, Czechia
    Eva BARTONÍCKOVÁ, Brno University of Technology, Brno, Czechia
    Jakub PALOV?ÍK, Brno University of Technology, Brno, Czechia
    Vladislav CÁBA, Brno University of Technology, Brno, Czechia
    Jirí MÁSILKO, Brno University of Technology, Brno, Czechia

    person_pinMartin SEDLACIK, Brno University of Technology, Brno, Czechia
    15:45 - 16:00 | The Impact of BaO Addition on the Structure and Microstructure of Glazes of the SiO2-Al2O3-CaO-MgO-Na2O systemKatarzyna PASIUT, AGH UST, Krakow, Poland
    Janusz PARTYKA, AGH UST, Krakow, Poland
    Dawid KOZIEN, AGH UST, Krakow, Poland

    person_pinKatarzyna PASIUT, AGH UST, Krakow, Poland
    16:00 - 16:15 | Bulk Alumina Glass and Glass-Ceramics with Multiple Stabilizers  Angshuman GUPTA, Metallurgical Enginnering and Materials Science Department, Indian Institute of Technology Bombay, Mumbai, India, Mumbai, India
    Anu MOHAN, Metallurgical Enginnering and Materials Science Department, Indian Institute of Technology Bombay, Mumbai, India, Mumbai, India
    Ashutosh Suresh GANDHI, Metallurgical Enginnering and Materials Science Department, Indian Institute of Technology Bombay, Mumbai, India, Mumbai, India

    person_pinAngshuman GUPTA, Metallurgical Enginnering and Materials Science Department, Indian Institute of Technology Bombay, Mumbai, India, Mumbai, India
    HL14:30 - 15:00 | Predicting Grain Boundary States and Transitions in FerroelectricsCatherine BISHOP,
    R. Edwin GARC?A, Purdue University, West Lafayette, United States
    K.s.n. VIKRANT, Indian Institute of Technology, Delhi, India

    person_pinCatherine BISHOP, University of Canterbury, Christchurch, New Zealand; MacDiarmid Institute for Advanced Materials and Nanotechnology, Christchurch, New Zealand
    15:00 - 15:15 | Mechanochemical activation boosts compositional homogeneity in relaxor 0.67BiFeO3-0.33BaTiO3 ceramics  Antonio IACOMINI, Electronic Ceramics Department, Jožef Stefan Institute, 1000 Ljubljana, Slovenia, Ljubljana, Slovenia
    Maja KOBLAR ,
    Tadej ROJAC ,

    person_pinAntonio IACOMINI, Electronic Ceramics Department, Jožef Stefan Institute, 1000 Ljubljana, Slovenia, Ljubljana, Slovenia
    15:15 - 15:30 | Local structure distortion evaluation of Ba0.5Sr0.5Fe1-xCuxZr0.05O3-δ facing physical properties alterationS. SUASMORO, Institut Teknologi 'Sepuluh Nopember' Surabaya, Surabaya, Indonesia
    F. FITRIANA, Dept. of Physics, Universitas Negri Surabaya, Surabaya 60231, Indonesia, Surabaya, Indonesia
    W. KLUSYUBUN, Synchroton Light Research Institute (Public Organisation), 111 University Avenue, Muang, Nakhon Ratchasima 30000, Thailand, Nakhon Ratchasima, Thailand
    M. KATO, Department of Applied Physics, Tohoku University, 6-6-05, Aoba, Aramaki, Aoba-Ku, Sendai 980-8579, Japan, Sendai, Japan

    person_pinS. SUASMORO, Institut Teknologi 'Sepuluh Nopember' Surabaya, Surabaya, Indonesia
    15:30 - 15:45 | Fundamental workings of chemical substitution at the A-site of perovskite oxides: a 207Pb NMR study of Ba-substituted PbZrO3  Sonja EGERT, TU Darmstadt, Darmstadt, Germany
    Jurij KORUZA, TU Graz, Graz, Austria
    Hergen BREITZKE, TU Darmstadt, Darmstadt, Germany
    Changhao ZHAO, TU Darmstadt, Darmstadt, Germany
    Barbara MALIC, Jožef Stefan Institute, Ljubljana, Slovenia
    Gerd BUNTKOWSKY, TU Darmstadt, Darmstadt, Germany
    Pedro B. GROSZEWICZ, TU Delft, Delft, Netherlands

    person_pinPedro B. GROSZEWICZ, TU Delft, Delft, Netherlands
    15:45 - 16:00 | Properties and performance of rare-earth-doped barium titanate ceramicsVojtech MARAK, CEITEC BUT, Brno University of Technology, Brno, Czechia
    Daniel DRDLIK,
    Pavel TOFEL,
    Katarina DRDLIKOVA,
    Karel MACA,

    person_pinVojtech MARAK, CEITEC BUT, Brno University of Technology, Brno, Czechia
    16:00 - 16:15 | Investigation of Structural and Electrical Properties of Undoped and Fe-doped PNN-PZT PiezoceramicsEzgi YALÇIN, Gebze Technical University, Kocaeli, Turkey
    Namik Kemal GÖZÜAÇIK, Gebze Technical University, Kocaeli, Turkey
    Sedat ALKOY, Gebze Technical University, Kocaeli, Turkey
    Ebru MENCUR, Gebze Technical University, Kocaeli, Turkey

    person_pinEzgi YALÇIN, Gebze Technical University, Kocaeli, Turkey
    14:30 - 14:45 | Preparation of transparent erbium-ytterbium co-doped yttrium aluminum garnet Er,Yb:YAG ceramics with the aid of freeze granulationAgnieszka SZYSIAK, Łukasiewicz Research Network - Institute of Microelectronics and Photonics, Warsaw, Poland
    Dariusz PODNIESI?SKI, Łukasiewicz Research Network - Institute of Microelectronics and Photonics, Warsaw, Poland
    Helena W?GLARZ, Łukasiewicz Research Network - Institute of Microelectronics and Photonics, Warsaw, Poland
    Mykhailo CHAIKA, Institute of Low Temperature and Structure Research, Polish Academy of Sciences, Wrocław, Poland

    person_pinAgnieszka SZYSIAK, Łukasiewicz Research Network - Institute of Microelectronics and Photonics, Warsaw, Poland
    14:45 - 15:00 | Thermosensitive luminescent lanthanide-doped titanium dioxideNicolas ALONSO,
    Etienne COPIN, Clément Ader (ICA) ; Université de Toulouse ; CNRS, IMT Mines Albi, INSA, ISAE-SUPAERO, UPS, Albi, France
    Florence ANSART, CIRIMAT - UPS, Toulouse, France
    Philippe BREVET, Technical Department, Safran Helicopter Engines, Toulouse, France
    Yannick LE MAOULT, Clément Ader (ICA) ; Université de Toulouse ; CNRS, IMT Mines Albi, INSA, ISAE-SUPAERO, UPS, Albi, France
    Thierry SENTENAC, Clément Ader (ICA) ; Université de Toulouse ; CNRS, IMT Mines Albi, INSA, ISAE-SUPAERO, UPS, Albi, France
    Sandrine DULUARD, CIRIMAT - UPS, Toulouse, France

    person_pinNicolas ALONSO, Technical Department, Safran Helicopter Engines, Toulouse, France; CIRIMAT - UPS, Toulouse, France; Clément Ader (ICA) ; Université de Toulouse ; CNRS, IMT Mines Albi, INSA, ISAE-SUPAERO, UPS, Albi, France
    15:00 - 15:15 | Multiple RE3+ (RE3+ = Tb3+, Tm3+, Yb3+) crystallographic sites in highly nonstoichiometric GAGXue FANG, CNRS-CEMHTI, Orleans, France
    Mathieu ALLIX, CNRS-CEMHTI, Orleans, France
    Michael PITCHER, CNRS-CEMHTI, Orleans, France

    person_pinXue FANG, CNRS-CEMHTI, Orleans, France
    15:15 - 15:30 | Thermochromic Solar Control Coatings on SiO2-Coated Float Glass for Energy-Efficient Smart WindowsCindy Po Keh YEUNG,
    Roberto HABETS,
    Luc LEUFKENS,
    Marcel VERHEIJEN,
    Zeger VROON,
    Daniel MANN,
    Pascal BUSKENS,

    person_pinDaniel MANN, The Netherlands Organisation for Applied Scientific Research (TNO), Eindhoven, Netherlands; Brightlands Materials Center, Geleen, Netherlands
    15:30 - 15:45 | Thermochromic Coatings and Laminates for Smart Windows Comprising VO2 NanopigmentsJanique HUPPERETZ,
    Lavinia CALVI,
    Cindy YEUNG,
    Roberto HABETS,
    Luc LEUFKENS,
    Ryan VAN ZANDVOORT,
    Demi WOLTERS,
    Ken ELEN,
    An HARDY,
    Marlies VAN BAEL,
    Nicole MEULENDIJKS,
    Daniel MANN,
    Pascal BUSKENS,

    person_pinJanique HUPPERETZ, The Netherlands Organisation for Applied Scientific Research (TNO), Eindhoven, Netherlands; Brightlands Materials Center, Geleen, Netherlands
    HL14:30 - 15:00 | Cold sintering of LATP- and LiFePO4-based cathodes for Li-ion solid-state batteriesKatja WAETZIG, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden, Germany
    Mykola VINNICHENKO, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden, Germany
    Jean-Philippe BEAUPAIN, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden, Germany
    Henry AUER, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden, Germany
    Nicolas ZAPP, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden, Germany
    Mihails KUSNEZOFF, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden, Germany

    person_pinKatja WAETZIG, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden, Germany
    15:00 - 15:15 | LLZO for batteries from powder synthesis to 3D printingGurdial BLUGAN, Empa, Laboratory for High Performance Ceramics, Dübendorf, Switzerland
    Diwakar KARUPPIAH, Empa, Laboratory for High Performance Ceramics, Dübendorf, Switzerland
    Dmitrii KOMISSARENKO, Empa, Laboratory for High Performance Ceramics, Dübendorf, Switzerland
    Amir HADIAN, Empa, Laboratory for High Performance Ceramics, Dübendorf, Switzerland
    Frank CLEMENS, Empa, Laboratory for High Performance Ceramics, Dübendorf, Switzerland

    person_pinGurdial BLUGAN, Empa, Laboratory for High Performance Ceramics, Dübendorf, Switzerland
    15:15 - 15:30 | Ultra-thick additive-free ceramic LCO electrodes obtained by solvent-free powder extrusion moldingDaniel DEL RÍO SANTOS, Universidad Carlos III de Madrid, Departamento de Ciencia e Ingenieria de Materiales e Ingenieria Quimica, Avda. Universidad 30, 28911, Leganes, Spain
    Carmen DE LA TORRE-GAMARRA, Universidad Carlos III de Madrid, Departamento de Ciencia e Ingenieria de Materiales e Ingenieria Quimica, Avda. Universidad 30, 28911, Leganes, Spain
    Antonio Jesús FERNÁNDEZ-ROPERO, Universidad Carlos III de Madrid, Departamento de Ciencia e Ingenieria de Materiales e Ingenieria Quimica, Avda. Universidad 30, 28911, Leganes, Spain
    Belen LEVENFELD, Universidad Carlos III de Madrid, Departamento de Ciencia e Ingenieria de Materiales e Ingenieria Quimica, Avda. Universidad 30, 28911, Leganes, Spain
    Alejandro VAREZ, Universidad Carlos III de Madrid, Departamento de Ciencia e Ingenieria de Materiales e Ingenieria Quimica, Avda. Universidad 30, 28911, Leganes, Spain

    person_pinAntonio Jesús FERNÁNDEZ-ROPERO, Universidad Carlos III de Madrid, Departamento de Ciencia e Ingenieria de Materiales e Ingenieria Quimica, Avda. Universidad 30, 28911, Leganes, Spain
    15:30 - 15:45 | An innovative synthesis: Garnet lithium-ion conductive solid-state electrolyte synthesized by an arc melting processSarah PRADEILLES,
    Emmanuel NONNET, Saint-Gobain Research Provence, Cavaillon, France
    Vincent GABAUDAN, Saint-Gobain Research Provence, Cavaillon, France
    Patrice SIMON, CIRIMAT, Toulouse, France
    Pierre-Louis TABERNA, CIRIMAT, Toulouse, France
    Patrick ROZIER, CIRIMAT, Toulouse, France

    person_pinSarah PRADEILLES, CIRIMAT, Toulouse, France; Saint-Gobain Research Provence, Cavaillon, France
    15:45 - 16:00 | Multi-Scale Tailoring of Lithium Ion Diffusion from Densification to Coarsening  Sujin PARK, Korea Institute of Materials Science, Changwon, Korea (Republic of)
    Seongwan JANG, Korea Institute of Materials Science, Changwon, Korea (Republic of)
    Hyeonjin SON, Korea Institute of Materials Science, Changwon, Korea (Republic of)
    Chang-Jun BAE, Korea Institute of Materials Science, Changwon, Korea (Republic of)

    person_pinChang-Jun BAE, Korea Institute of Materials Science, Changwon, Korea (Republic of)
    K14:30 - 15:00 | Bio-inspired apatites: from bone to skinChristophe DROUET, CIRIMAT / Université de Toulouse, Toulouse, France
    Maela CHOIMET-BERNARD, CIRIMAT / Université de Toulouse, Toulouse, France
    Mathilde GUERIN,
    Gilles SUBRA, IBMM / Université de Montpellier, Montpellier, France
    Audrey TOURRETTE, CIRIMAT / Université de Toulouse, Toulouse, France
    Jeremy SOULIE, CIRIMAT / Université de Toulouse, Toulouse, France
    Liisa KUHN, UCONN Health / University of Connecticut, USA, Farmington, United States

    person_pinChristophe DROUET, CIRIMAT / Université de Toulouse, Toulouse, France
    15:00 - 15:15 | 3D-printing of chitosan-apatite composite materials designed for bone substitution: optimized formulation of inksSolène TADIER, Univ Lyon, INSA-Lyon, CNRS, MATEIS UMR5510, F-69621 Villeurbanne, France, Villeurbanne, France
    Fabien BROUILLET,
    Madeleine SAVIGNY,
    Quentin CARSALADE, Laboratoire CIRIMAT, Université de Toulouse, CNRS, Université Paul Sabatier, 35 ch. des Maraichers, 31062 Toulouse, Toulouse, France
    Ghislaine BERTRAND, Laboratoire CIRIMAT, Université de Toulouse, CNRS, INP- ENSIACET, 4 allée Emile Monso - BP44362, 31030 Toulouse cedex 4, Toulouse, France
    Laurent GREMILLARD, Univ Lyon, INSA-Lyon, CNRS, MATEIS UMR5510, F-69621 Villeurbanne, France, Villeurbanne, France
    Alexandra MONTEMBAULT, Laboratoire Ingénierie des Matériaux Polymères (IMP), UMR 5223, CNRS, UCBL 1, 15 Bd A. Latarjet, 69622 Villeurbanne, Villeurbanne, France

    person_pinSolène TADIER, Univ Lyon, INSA-Lyon, CNRS, MATEIS UMR5510, F-69621 Villeurbanne, France, Villeurbanne, France
    15:15 - 15:30 | Self-setting bioactive inks highly rich in CaP-based powders for 3D printingMiguel COELHO,
    Paula M. C. TORRES, DEMaC/CICECO University of Aveiro, Aveiro, Portugal
    Tiago CORREIA, Department of Chemistry, CICECO, University of Aveiro, Aveiro, Portugal
    Nilza RIBEIRO, DEMaC/CICECO University of Aveiro, Aveiro, Portugal
    João MANO, Department of Chemistry, CICECO, University of Aveiro, Aveiro, Portugal
    Susana Maria HENRIQUES OLHERO, DEMaC/CICECO University of Aveiro, Aveiro, Portugal

    person_pinSusana Maria HENRIQUES OLHERO, DEMaC/CICECO University of Aveiro, Aveiro, Portugal
    15:30 - 15:45 | Biomimetic nacre-like hydroxyapatite/polymer composites for load-bearing bone implants applicationParinaz TABRIZIAN, University of Bristol, Bristol, United Kingdom
    Huijun SUN, University of Bristol, Bristol, United Kingdom
    Urangua JARGALSAIKHAN, University of Surrey, Guildford, United Kingdom
    Tan SUI, University of Surrey, Guildford, United Kingdom
    Sean DAVIS, University of Bristol, Bristol, United Kingdom
    Bo SU, University of Bristol, Bristol, United Kingdom

    person_pinParinaz TABRIZIAN, University of Bristol, Bristol, United Kingdom
    15:45 - 16:00 | Organic/borosilicate hybrid materials for biomedical applicationsJosé Carlos ALMEIDA, Department of Materials and Ceramic Engineering, University of Aveiro, Aveiro, Portugal
    Soraia COELHO, Department of Materials and Ceramic Engineering, University of Aveiro, Aveiro, Portugal
    Tiago CORREIA, Department of Chemistry, University of Aveiro, Aveiro, Portugal
    Paula TORRES, Department of Materials and Ceramic Engineering, University of Aveiro, Aveiro, Portugal
    Susana OLHERO, Department of Materials and Ceramic Engineering, University of Aveiro, Aveiro, Portugal
    Maria Helena FERNANDES, Department of Materials and Ceramic Engineering, University of Aveiro, Aveiro, Portugal

    person_pinJosé Carlos ALMEIDA, Department of Materials and Ceramic Engineering, University of Aveiro, Aveiro, Portugal
    16:00 - 16:15 | Low Temperature Sythesized α-TCP Bone Cement - A Possibility to Improve Physicochemical Properties and Cell ResponseOznur DEMIR, Riga Technical University , Riga, Latvia

    person_pinOznur DEMIR, Riga Technical University , Riga, Latvia
    16:15 - 16:30 | Investigating the physicochemical and antibacterial properties of nanocrystalline hydroxyapatite codoped with silver and carbonateMarta TAVONI, Institute of Science, Technology and Sustainability for Ceramics , Faenza, Italy
    Massimiliano DAPPORTO, Institute of Science, Technology and Sustainability for Ceramics , Faenza, Italy
    Anna TAMPIERI, Institute of Science, Technology and Sustainability for Ceramics , Faenza, Italy
    Elena RESTIVO, Molecular Medicine Department, Center for Health Technologies, UdR INSTM, Pavia, Italy
    Livia VISAI, Molecular Medicine Department, Center for Health Technologies, UdR INSTM, Pavia, Italy
    Simone SPRIO, Institute of Science, Technology and Sustainability for Ceramics , Faenza, Italy

    person_pinMarta TAVONI, Institute of Science, Technology and Sustainability for Ceramics , Faenza, Italy
    14:30 - 15:00 | Compositional and Structural Disorder: Valuable Preparative Tools toward Novel Materials and Enablers for the Circular EconomyIonescu EMANUEL,
    Dharma Teja TEPPALLA, TU Darmstadt, Darmstadt, Germany
    Gert HOMM, Fraunhofer IWKS, Alzenau, Germany
    Anke WEIDENKAFF,

    person_pinIonescu EMANUEL, Fraunhofer IWKS, Alzenau, Germany; TU Darmstadt, Darmstadt, Germany
    15:00 - 15:30 | The Polymer-Derived Ceramics route as an innovative concept towards functional inorganic materials with boosted propertiesMarwan BEN MILED, Institute of Research for Ceramics (IRCER), Limoges, France
    Maxime CHEYPE, Institute of Research for Ceramics (IRCER), Limoges, France
    Xavier DESCHANELS, Institut de Chimie Séparative de Marcoule (ICSM) , Marcoule, France
    Aurélien HABRIOUX, Institut de Chimie des Milieux et Matériaux de Poitiers (IC2MP), Poitiers, France
    Samuel BERNARD, Institute of Research for Ceramics (IRCER), Limoges, France

    person_pinSamuel BERNARD, Institute of Research for Ceramics (IRCER), Limoges, France
    15:30 - 16:00 | Macro-porous ceramics for the Sustainable Development Goals (SDGs)Tatsuki OHJI, National Institute of Advanced Industrial Science and Technology (AIST), Nagoya, Japan
    Manabu FUKUSHIMA, National Institute of Advanced Industrial Science and Technology (AIST), Nagoya, Japan

    person_pinTatsuki OHJI, National Institute of Advanced Industrial Science and Technology (AIST), Nagoya, Japan
    16:00 - 16:30 | Machine-learning Based Microstructure-property Relationships for Ceramics Using High-Throughput, Ultra-fast Laser Sintering  Xiao GENG, Clemson University, Clemson, United States
    Jianan TANG, Clemson University, Clemson, United States
    Siddhartha SARKAR, Clemson University, Clemson, United States
    Bridget SHERIDAN, Clemson University, Clemson, United States
    Dongsheng LI, Advanced Manufacturing LLC, East Hartford, United States
    Yunfeng SHI, Rensselaer Polytechnic Institute, Troy, United States
    Jianhua TONG, Clemson University, Clemson, United States
    Hai XIAO, Clemson University, Clemson, United States
    Fei PENG, Clemson University, Clemson, United States
    Rajendra BORDIA, Clemson University, Clemson, United States

    person_pinRajendra BORDIA, Clemson University, Clemson, United States
    HL17:00 - 17:30 | Boron Nitride Nanosheets from a new source of large hBN single crystalsBérangère TOURY, Laboratoire des Multimatériaux et Interfaces - University of lyon, Villeurbanne, France
    Camille MAESTRE,
    Vincent GARNIER, Laboratoire Matériaux Ingénierie et Science - INSA Lyon, Villeurbanne, France
    Philippe STEYER, Laboratoire Matériaux Ingénierie et Science - INSA Lyon, Villeurbanne, France
    Catherine JOURNET, Laboratoire des Multimatériaux et Interfaces - University of lyon, Villeurbanne, France

    person_pinBérangère TOURY, Laboratoire des Multimatériaux et Interfaces - University of lyon, Villeurbanne, France
    17:30 - 17:45 | Bottom-up synthesis of high entropy hydroxide nanosheets and their potential applicationsFei LI, Joining and Welding Research Institute Osaka University, Osaka, Japan
    Hiroya ABE, Joining and Welding Research Institute Osaka University, Osaka, Japan

    person_pinFei LI, Joining and Welding Research Institute Osaka University, Osaka, Japan
    17:45 - 18:00 | Graphene-Si3N4 nanocomposites: powder synthesis, Spark Plasma Sintering, microstructure and propertiesAdam BERRAIS, Université Toulouse 3 / CIRIMAT, Toulouse, France
    Alicia WEIBEL, Université Toulouse 3 / CIRIMAT, Toulouse, France
    Geoffroy CHEVALLIER,
    Jérôme ESVAN, Toulouse INP / CIRIMAT, Toulouse, France
    Claude ESTOURNES, Université Toulouse 3 / CIRIMAT, Toulouse, France
    Christophe LAURENT, Université Toulouse 3 / CIRIMAT, Toulouse, France

    person_pinChristophe LAURENT, Université Toulouse 3 / CIRIMAT, Toulouse, France
    18:00 - 18:15 | Production and Characterization of SiOC Ambi/Aerogels Oyku ICIN, Department of Materials Science and Engineering, Izmir Institute of Technology, 35430, İzmir, Turkey
    Gian Domenico SORARU, Department of Industrial Engineering, University of Trento, Via Sommarive 9, 38123, Trento, Italy
    Cekdar VAKIFAHMETOGLU, Department of Materials Science and Engineering, Izmir Institute of Technology, 35430, İzmir, Turkey

    person_pinOyku ICIN, Department of Materials Science and Engineering, Izmir Institute of Technology, 35430, İzmir, Turkey
    18:15 - 18:30 | Multimodal macropore-tailoring of freeze-cast SiOC utilizing binary structure-directing agentsKatharina RAUCHENWALD, TU Wien, Wien, Austria
    Thomas KONEGGER, TU Wien, Wien, Austria

    person_pinKatharina RAUCHENWALD, TU Wien, Wien, Austria
    K17:00 - 17:30 | Mechanical behavior of MAX phasesMiladin RADOVIC, Texas A&M University, College Station, United States

    person_pinMiladin RADOVIC, Texas A&M University, College Station, United States
    17:30 - 17:45 | High temperature tribological behaviour of Ti2AlC and Ti3AlC2 MAX-phases synthetized by SPS from Ti/Al/TiC powder mixturesVedi DUPONT, BCRC (Belgian Ceramic Research centre), MONS, Belgium
    Laurent BOILET, BCRC (Belgian Ceramic Research centre), MONS, Belgium
    Jean-Pierre ERAUW, BCRC (Belgian Ceramic Research centre), MONS, Belgium

    person_pinVedi DUPONT, BCRC (Belgian Ceramic Research centre), MONS, Belgium
    17:45 - 18:00 | Synthesis of SiC/Ti3SiC2 composites with high SiC contents: sintering and thermodynamicsJerome ROGER, Laboratoire des Composites ThermoStructuraux, UMR 5801, Université de Bordeaux, CNRS, CEA, SAFRAN, 33600 Pessac, France , Pessac, France
    Bilal CHAHHOU, Laboratoire des Composites ThermoStructuraux, UMR 5801, Université de Bordeaux, CNRS, CEA, SAFRAN, 33600 Pessac, France , Pessac, France

    person_pinJerome ROGER, Laboratoire des Composites ThermoStructuraux, UMR 5801, Université de Bordeaux, CNRS, CEA, SAFRAN, 33600 Pessac, France , Pessac, France
    18:00 - 18:15 | Wet-chemical assisted synthesis of nitride and carbonitride MAX phases Niels KUBITZA, Technische Universität Darmstadt, Darmstadt, Germany
    Christina S. BIRKEL,

    person_pinNiels KUBITZA, Technische Universität Darmstadt, Darmstadt, Germany
    18:15 - 18:30 | Continuous Al-supply in Cr2AlC MAX phase during oxidation at high temperatureClio AZINA, Materials Chemistry, RWTH Aachen University, Aachen, Germany
    Marcus HANS, Materials Chemistry, RWTH Aachen University, Aachen, Germany
    Per EKLUND, Energy Materials Unit, Thin film Physics Division, Dept. of Physics, Chemistry and Biology (IFM), Linköping University, Linköping, Sweden
    Jesus GONZALEZ JULIAN, Chair of Ceramics, Institute of Mineral Engineering, RWTH Aachen University, Aachen, Germany
    Jochen SCHNEIDER, Materials Chemistry, RWTH Aachen University, Aachen, Germany

    person_pinClio AZINA, Materials Chemistry, RWTH Aachen University, Aachen, Germany
    18:30 - 18:45 | Scalable synthesis and purification of high-yield monolayer MXene dispersions in different mediaNick GOOSSENS, Department of Materials Engineering, KU Leuven, Heverlee, Belgium
    Konstantina LAMBRINOU, School of Computing and Engineering, University of Huddersfield, Huddersfield, United Kingdom
    Jozef VLEUGELS, Department of Materials Engineering, KU Leuven, Heverlee, Belgium
    Francisco MOLINA LOPEZ, Department of Materials Engineering, KU Leuven, Heverlee, Belgium

    person_pinNick GOOSSENS, Department of Materials Engineering, KU Leuven, Heverlee, Belgium
    HL17:00 - 17:30 | To drill or not to drill? - Creep of an oxide-oxide composite with diamond-drilled effusion holes at elevated temperatureMegan HARKINS, US Air Force Institute of Technology, WPAFB, United States
    Marina RUGGLES-WRENN, US Air Force Institute of Technology, WPAFB, United States

    person_pinMarina RUGGLES-WRENN, US Air Force Institute of Technology, WPAFB, United States
    17:30 - 17:45 | Engineering damage tolerant failure modes into chemically bonded phosphate ceramic matrix compositesErin VALENZUELA-HEEGER, University of Birmingham, Birmingham, United Kingdom
    Jon BINNER, University of Birmingham, Birmingham, United Kingdom
    Chris HAWKINS, DSTL, Salisbury, United Kingdom

    person_pinErin VALENZUELA-HEEGER, University of Birmingham, Birmingham, United Kingdom
    17:45 - 18:00 | Automated Fiber Placement of High-Denier Unidirectional Ox-Ox CMC Slit-TapeWylie SIMPSON, Axiom Materials Inc, Santa Ana, United States
    Antonios TONTISAKIS, Axiom Materials Inc, Santa Ana, United States
    Joshua GOERTZ, NIAR ATLAS, Wichita, United States
    Martens ALEX, NIAR ATLAS, Wichita, United States
    Waruna SENEVIRATNE, NIAR ATLAS, Wichita, United States
    Dhawan RAJ, Axiom Materials Inc, Santa Ana, United States

    person_pinAntonios TONTISAKIS, Axiom Materials Inc, Santa Ana, United States
    18:00 - 18:15 | Slurry formulation for Ceramic Matrix Composites by tow impregnation (tow-preg)Zoé BORIUS, ONERA, Châtillon, France
    Antoine DEBARRE, ONERA, Châtillon, France
    Marc SINGLARD, IRT St-Exupéry, Talence, France
    Gilles DUSSERRE, ICA, Albi, France
    Thierry CUTARD, ICA, Albi, France
    Aurélie JULIAN-JANKOWIAK, ONERA, Châtillon, France

    person_pinZoé BORIUS, ONERA, Châtillon, France
    18:15 - 18:30 | Novel measuring method for prepreg processability of oxide fibre ceramic matrix compositesFelix LINDNER, Chair of Ceramic Materials Engineering, University of Bayreuth, Bayreuth, Germany
    Georg PUCHAS, Chair of Ceramic Materials Engineering, University of Bayreuth, Bayreuth, Germany
    Stefan SCHAFFÖNER, Chair of Ceramic Materials Engineering, University of Bayreuth, Bayreuth, Germany

    person_pinFelix LINDNER, Chair of Ceramic Materials Engineering, University of Bayreuth, Bayreuth, Germany
    18:30 - 18:45 | Synthesis of a alumina/barium aluminosilicate oxyde/oxyde composite at reduced temperature?Arnaud SAINTONGE, Thermostructural Composites Laboratory UMR 5801, Pessac, F-33600, France
    Yann LEPETITCORPS, Thermostructural Composites Laboratory UMR 5801, Pessac, F-33600, France
    Alexandre ALLEMAND , CEA CESTA, F-33116, Le Barp, France
    James BRAUN,
    Thierry PIQUERO, CEA DAM Le Ripault, F-37260, Monts, France
    Sophie BEAUDET - SAVIGNAT, CEA DAM Le Ripault, F-37260, Monts, France

    person_pinArnaud SAINTONGE, Thermostructural Composites Laboratory UMR 5801, Pessac, F-33600, France
    17:00 - 17:15 | Study of SiC-based refractory tiles compaction behaviour during shaping with modified Cam-Clay model  Audrey TIXIER,
    François VALDIVIESO, LGF - Mines Saint-Étienne, Saint-Étienne, France
    Patrick GANSTER, LGF - Mines Saint-Étienne, Saint-Étienne, France
    Hanène SOULI, LTDS - Centrale Lyon, Saint-Étienne, France
    Cyrille VARONA, BONY SAS, Saint-Étienne, France
    Emmanuel DE BILBAO, CEMHTI - CNRS, Orléans, France
    Jacques POIRIER, CEMHTI - CNRS, Orléans, France
    Jean-Michel BROSSARD, Veolia Recherche & Innovation, Limay, France

    person_pinAudrey TIXIER, LGF - Mines Saint-Étienne, Saint-Étienne, France; BONY SAS, Saint-Étienne, France; CEMHTI - CNRS, Orléans, France
    17:15 - 17:30 | Thermomechanical Properties related to Microstructural Design of Alumina/Aluminum Titanate Composite MaterialsMossaab MOUIYA,
    Nicolas TESSIER-DOYEN, University of Limoges, Institute of Research for Ceramics (IRCER), Limoges, France
    Youssef TAMRAOUI, Materials Science, Energy and Nanoengineering Department, University Mohammed VI Polytechnic (UM6P), Benguerir, Morocco
    Jean-Christophe DUPRÉ, University of Poitiers, PPRIME UPR CNRS 3346, Poitiers, France
    Pascal DOUMALIN, University of Poitiers, PPRIME UPR CNRS 3346, Poitiers, France
    Jones ALAMI, Materials Science, Energy and Nanoengineering Department, University Mohammed VI Polytechnic (UM6P), Benguerir, Morocco
    Marc HUGER, University of Limoges, Institute of Research for Ceramics (IRCER), Limoges, France

    person_pinMarc HUGER, University of Limoges, Institute of Research for Ceramics (IRCER), Limoges, France
    17:30 - 17:45 | Thermal damage modelling of the microstructure of model refractory materials by the discrete element methodQuentin PLEDEL, University of Limoges, Institute of Research for Ceramics (IRCER), UMR 7315, European Ceramics Center, Limoges, France
    Marc HUGER, University of Limoges, Institute of Research for Ceramics (IRCER), UMR 7315, European Ceramics Center, Limoges, France
    Damien ANDRÉ, University of Limoges, Institute of Research for Ceramics (IRCER), UMR 7315, European Ceramics Center, Limoges, France

    person_pinDamien ANDRÉ, University of Limoges, Institute of Research for Ceramics (IRCER), UMR 7315, European Ceramics Center, Limoges, France
    17:45 - 18:00 | Different Methods of Young's Modulus Determination and Evaluation of Refractories at High TemperaturesThorsten TONNESEN, RWTH Aachen University, Institute of Mineral Engineering (GHI), Aachen, Germany
    Michel HENZE, RWTH Aachen University, Institute of Metal Forming (IBF), Aachen, Germany
    Gerhard HIRT, RWTH Aachen University, Institute of Metal Forming (IBF), Aachen, Germany
    Jesus GONZALEZ-JULIAN, RWTH Aachen University, Institute of Mineral Engineering (GHI), Aachen, Germany

    person_pinThorsten TONNESEN, RWTH Aachen University, Institute of Mineral Engineering (GHI), Aachen, Germany
    18:00 - 18:15 | Influence of impurities on the thermomechanical behaviour of refractory high alumina cement free castablesErwan BROCHEN, Forschungsgemeinschaft Feuerfest e.V., Höhr-Grenzhausen, Germany
    Christian DANNERT, Forschungsgemeinschaft Feuerfest e.V., Höhr-Grenzhausen, Germany
    Laura ERBAR, Hochschule Koblenz: University of Applied Science, Höhr-Grenzhausen, Germany
    Katharina SARNOW, Hochschule Koblenz: University of Applied Science, Höhr-Grenzhausen, Germany
    Olaf KRAUSE, Hochschule Koblenz: University of Applied Science, Höhr-Grenzhausen, Germany
    Jacek PODWÓRNY, Łukasiewicz-Institute of Ceramics and Building Materials - Refractory Materials Center, Gliwice, Poland
    Karolina DUDEK, Łukasiewicz-Institute of Ceramics and Building Materials - Refractory Materials Center, Gliwice, Poland

    person_pinErwan BROCHEN, Forschungsgemeinschaft Feuerfest e.V., Höhr-Grenzhausen, Germany
    18:15 - 18:30 | Consolidation and mechanical behavior of a refractory ceramic in temperatureAmelie BIGEARD,
    David JAUFFRES, SIMaP, Grenoble, France
    Pierrick VESPA, Saint-Gobain Research Provence, Cavaillon, France
    Didier BOUVARD, SIMaP, Grenoble, France
    Elodie BOLLER, European Synchrotron Radiation Facility, Grenoble, France

    person_pinAmelie BIGEARD, SIMaP, Grenoble, France; Saint-Gobain Research Provence, Cavaillon, France
    18:30 - 18:45 | On the Statistics of the Mechanical Failure in Flame-Sprayed Self Supporting ComponentsMarc NEUMANN, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Magda HOLLENBACH, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Florian KERBER, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Tony WETZIG, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Christos G. ANEZIRIS, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany

    person_pinMarc NEUMANN, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    HL17:00 - 17:30 | Effects of granite waste addition on porcelain stoneware technological propertiesChiara MOLINARI, CNR - ISSMC, Faenza, Italy
    Andreea SIMA, Instituto Universitario de Tecnología Cerámica, Universidad Jaume I, Castellón , Spain
    Matteo CAVINA, Alma Mater Studiorum - Bologna University, Department of Industrial Chemistry "Toso Montanari", Bologna, Italy
    Guia GUARINI, CNR - ISSMC, Faenza, Italy
    Sonia CONTE, CNR - ISSMC, Faenza, Italy
    Stefania ALBONETTI, Alma Mater Studiorum - Bologna University, Department of Industrial Chemistry "Toso Montanari", Bologna, Italy
    Enrique SÁNCHEZ , Instituto Universitario de Tecnología Cerámica, Universidad Jaume I, Castellón , Spain
    Eugeni CAÑAS, Instituto Universitario de Tecnología Cerámica, Universidad Jaume I, Castellón , Spain
    Michele DONDI, CNR - ISSMC, Faenza, Italy
    Chiara ZANELLI, CNR - ISSMC, Faenza, Italy

    person_pinChiara MOLINARI, CNR - ISSMC, Faenza, Italy
    17:30 - 17:45 | Pre-industrial scale prototypes of ceramic wall tiles with bio-calcium carbonate from eggshell waste  Inês Silveirinha VILARINHO, CICECO – Aveiro Institute of Materials/DEMaC - Department of Materials and Ceramic Engineering, University of Aveiro, Aveiro, Portugal
    Marinelia CAPELA, CICECO – Aveiro Institute of Materials/DEMaC - Department of Materials and Ceramic Engineering, University of Aveiro, Aveiro, Portugal
    José SILVA, Mota Ceramic Solutions, Oiã, Portugal
    Sofia BATISTA, Mota Ceramic Solutions, Oiã, Portugal
    Francisca VÁSQUEZ, Instituto de Tecnología Cerámica (ITC), Asociación de Investigación de las Industrias Cerámicas (AICE), Campus Universitario Riu Sec, Castellón, Spain
    Maria Paula SEABRA, CICECO – Aveiro Institute of Materials/DEMaC - Department of Materials and Ceramic Engineering, University of Aveiro, Aveiro, Portugal

    person_pinMaria Paula SEABRA, CICECO – Aveiro Institute of Materials/DEMaC - Department of Materials and Ceramic Engineering, University of Aveiro, Aveiro, Portugal
    17:45 - 18:00 | Red mud-containing inorganic polymer sorbents: novel and effective route to depollute acid mine drainage wastewatersRui NOVAIS, Department of Materials and Ceramic Engineering / CICECO-Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    Nuno GONÇALVES, Department of Materials and Ceramic Engineering / CICECO-Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    João CARVALHEIRAS, Department of Materials and Ceramic Engineering / CICECO-Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    Tânia GAMEIRO, Department of Materials and Ceramic Engineering / CICECO-Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    João LABRINCHA, Department of Materials and Ceramic Engineering / CICECO-Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal

    person_pinRui NOVAIS, Department of Materials and Ceramic Engineering / CICECO-Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    HL17:00 - 17:30 | Defect Chemistry and electrical transport properties of Pr1-xCaxMnO3 ceramicsChristian PITHAN, Forchungszentrum Jülich GmbH, Peter Grünberg Institute PGI-7 (Electronic Materials), Jülich, Germany

    person_pinChristian PITHAN, Forchungszentrum Jülich GmbH, Peter Grünberg Institute PGI-7 (Electronic Materials), Jülich, Germany
    17:30 - 17:45 | Suppressing migration of oxygen vacancies in BaTiO3 for high-voltage, high-temperature capacitorsZhanpeng XU, University of Nottingham, Nottingham, United Kingdom
    David GRANT, University of Nottingham, Nottingham, United Kingdom
    Ming LI, University of Nottingham, Nottingham, United Kingdom

    person_pinMing LI, University of Nottingham, Nottingham, United Kingdom
    17:45 - 18:00 | Impact of transition metal oxidation states distribution on physical properties  Olivier TOULEMONDE, Institut de Chimie de la Matière Condensée de Bordeaux / Université de Bordeaux, Bordeaux, France

    person_pinOlivier TOULEMONDE, Institut de Chimie de la Matière Condensée de Bordeaux / Université de Bordeaux, Bordeaux, France
    18:00 - 18:15 | Oxygen vacancy and lattice distortion of Ni-Fe oxide catalyst for CNT growthJaekwang LEE, School of Materials science and engineering, Pusan national university, Busan, Korea (Republic of)
    Ju-Yeon HA, System & Energy Division, Korea Testing Laboratory, Seoul, Korea (Republic of)
    Hyun-Gyoo SHIN, System & Energy Division, Korea Testing Laboratory, Seoul, Korea (Republic of)
    Juyeong KIM, Department of research and development, HyMAR corporation, Busan, Korea (Republic of)
    Heesoo LEE, School of Materials science and engineering, Pusan national university, Busan, Korea (Republic of)
    Seoung-Ki LEE, School of Materials science and engineering, Pusan national university, Busan, Korea (Republic of)

    person_pinJaekwang LEE, School of Materials science and engineering, Pusan national university, Busan, Korea (Republic of)
    18:15 - 18:30 | Temperature-dependent cation distribution in NTC thermistor spinels probed with neutron diffraction and Seebeck measurementsJan DINGER, Ernst-Abbe-Hochschule Jena, Jena, Germany
    Jörg TÖPFER, Ernst-Abbe-Hochschule Jena, Jena, Germany

    person_pinJörg TÖPFER, Ernst-Abbe-Hochschule Jena, Jena, Germany
    18:30 - 18:45 | Influence of neutron and gamma irradiation on electrocaloric properties of Mn and La-doped 0.9Pb(Mg1/3Nb2/3)O3–0.1PbTiO3 ceramicsAnkita SARKAR, Jožef Stefan Institute, Ljubljana, Slovenia
    Hana URŠIC,
    AnžE JAZBEC, Jožef Stefan Institute, Ljubljana, Slovenia
    Luka SNOJ,
    Matej ŠADL,
    Silvo DRNOVŠEK, Jožef Stefan Institute, Ljubljana, Slovenia
    Barbara MALIC,

    person_pinAnkita SARKAR, Jožef Stefan Institute, Ljubljana, Slovenia
    18:45 - 19:00 | Electronic structure and charge transport in NaNbO3Nicole BEIN, Technical University of Darmstadt, Darmstadt, Germany
    Brigita KMET, Jozef-Stefan-Institute, Ljubljana, Slovenia
    Tadej ROJAC, Jozef-Stefan-Institute, Ljubljana, Slovenia
    Barbara MALIC, Jozef-Stefan-Institute, Ljubljana, Slovenia
    Azadeh MARYAM, Technical University of Darmstadt, Darmstadt, Germany
    Till FRÖMLING, Technical University of Darmstadt, Darmstadt, Germany
    Andreas KLEIN, Technical University of Darmstadt, Darmstadt, Germany

    person_pinAndreas KLEIN, Technical University of Darmstadt, Darmstadt, Germany
    17:00 - 17:15 | RAPID LASER-INDUCED CRYSTALLIZATION OF THERMOCHROMIC VO2 THIN FILMS  Maria BASSO,
    Elena COLUSSO, University of Padova - Department of Industrial Engineering, Padova, Italy
    Chiara CARRARO, University of Padova - Department of Physics and Astronomy, Padova, Italy
    Enrico NAPOLITANI, University of Padova - Department of Physics and Astronomy, Padova, Italy
    Anna REGOUTZ, Department of Chemistry - University College London, London, United Kingdom
    Alessandro MARTUCCI, University of Padova - Department of Industrial Engineering, Padova, Italy

    person_pinElena COLUSSO, University of Padova - Department of Industrial Engineering, Padova, Italy
    17:15 - 17:30 | Preparation of nanostructured SnO2 thin-films as efficient electron transport layers for perovskite solar cellsArijeta BAFTI, University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, Croatia
    Ivana PANŽIC, University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, Croatia
    Luka PAVIC, Ruđer Bošković Institute, Zagreb, Croatia
    Vilko MANDIC, University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, Croatia

    person_pinArijeta BAFTI, University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, Croatia
    17:30 - 17:45 | Titanium dioxide-based ceramic nanoparticles for photocatalytic degradation of microplastics  Erika Iveth CEDILLO-GONZALEZ,
    Maria Camila ARIZA-TARAZONA, University of Modena and Reggio Emilia, Modena, Italy
    Cristina SILIGARDI,

    person_pinErika Iveth CEDILLO-GONZALEZ, University of Modena and Reggio Emilia, Modena, Italy; National Interuniversity Consortium of Materials Science and Technology (INSTM), Florence, Italy
    17:45 - 18:00 | Sound velocities of porous oxide and silicate ceramics – from theoretical predictions to experimental resultsPetra ŠIMONOVÁ, Department of Glass and Ceramics, University of Chemistry and Technology, Prague, Czechia
    Willi PABST, Department of Glass and Ceramics, University of Chemistry and Technology, Prague, Czechia

    person_pinPetra ŠIMONOVÁ, Department of Glass and Ceramics, University of Chemistry and Technology, Prague, Czechia
    18:00 - 18:15 | Feasible Synthesis of Rare Earth-Free Zinc Silicate-Based CeramicsJallouli NECIB, Department of Mechanical and Industrial Engineering, Tallinn University of Technology, Ehitajate 5, 19180 , Tallinn, Estonia
    Rocío Estefanía ROJAS-HERNANDEZ, Department of Mechanical and Industrial Engineering, Tallinn University of Technology, Ehitajate 5, 19180 , Tallinn, Estonia
    Fernando RUBIO-MARCOS, Electroceramic Department, Instituto de Cerámica y Vidrio, CSIC, Kelsen 5, 28049, Madrid, Spain
    Irina HUSSAINOVA, Department of Mechanical and Industrial Engineering, Tallinn University of Technology, Ehitajate 5, 19180 , Tallinn, Estonia
    José Francisco FERNANDEZ, Electroceramic Department, Instituto de Cerámica y Vidrio, CSIC, Kelsen 5, 28049, Madrid, Spain
    Eduard FELDBACH , Institute of Physics, University of Tartu, W. Ostwald Str 1, 50411, Tartu, Estonia

    person_pinJallouli NECIB, Department of Mechanical and Industrial Engineering, Tallinn University of Technology, Ehitajate 5, 19180 , Tallinn, Estonia
    HL17:00 - 17:30 | Development of ytterbium disilicate-based environmental barrier coatings by thermal spray methods  Robert VAßEN, Forschungszentrum Jülich GmbH, IEK-1, Jülich, Germany
    Emine BAKAN, Forschungszentrum Jülich GmbH, IEK-1, Jülich, Germany
    Edward GILDERSLEEVE, Forschungszentrum Jülich GmbH, IEK-1, Jülich, Germany
    Dapeng ZHOU, Forschungszentrum Jülich GmbH, IEK-1, Jülich, Germany
    Dmitry NAUMENKO, Forschungszentrum Jülich GmbH, IEK-2, Jülich, Germany
    Olivier GUILLON, Forschungszentrum Jülich GmbH, IEK-1, Jülich, Germany

    person_pinRobert VAßEN, Forschungszentrum Jülich GmbH, IEK-1, Jülich, Germany
    17:30 - 17:45 | Enhancing and understanding the H2O/CO2 coelectrolysis process in SOECs modified with the nanoparticles of the transition metalsPatryk BLASZCZAK, Advanced Materials Center, Institute of Nanotechnology and Materials Engineering, Faculty of Applied Physics and Mathematics, Gdansk University of Technology, 80-233 Gdańsk, ul. Narutowicza 11/12, Poland, Gdańsk, Poland
    Agata DUCKA, Advanced Materials Center, Institute of Nanotechnology and Materials Engineering, Faculty of Applied Physics and Mathematics, Gdansk University of Technology, 80-233 Gdańsk, ul. Narutowicza 11/12, Poland, Gdańsk, Poland
    Krzysztof MATLAK, National Synchrotron Radiation Centre SOLARIS, Jagiellonian University, Czerwone Maki 98, 30-392 Kraków, Poland, Kraków, Poland
    Barbara WOLANIN, National Synchrotron Radiation Centre SOLARIS, Jagiellonian University, Czerwone Maki 98, 30-392 Kraków, Poland, Kraków, Poland
    Bretislav ŠMÍD, Department of Surface and Plasma Science, Faculty of Mathematics and Physics, Charles University, V Holešovičkách 747/2, Prague 8, CZ-180 00 Prague, Czech Republic, Praha, Czechia
    Alessandro PURI, CNR-IOM-OGG c/o ESRF-The European Synchrotron, 71 Avenue des Martyrs, 38000 Grenoble, France, Grenoble, France
    Wang SEA-FUE, Department of Materials and Mineral Resources Engineering, National Taipei University of Technology, 1, Sec. 3, Zhongxiao E. Rd., Taipei, 106 Taiwan, Taipei, Taiwan
    Beata BOCHENTYN, Advanced Materials Center, Institute of Nanotechnology and Materials Engineering, Faculty of Applied Physics and Mathematics, Gdansk University of Technology, 80-233 Gdańsk, ul. Narutowicza 11/12, Poland, Gdańsk, Poland
    Piotr JASINSKI, Adavanced Materials Center, Faculty of Electronics, Telecommunications and Informatics, Gdansk University of Technology, 80-233 Gdańsk, ul. Narutowicza 11/12, Poland, Gdańsk, Poland

    person_pinPatryk BLASZCZAK, Advanced Materials Center, Institute of Nanotechnology and Materials Engineering, Faculty of Applied Physics and Mathematics, Gdansk University of Technology, 80-233 Gdańsk, ul. Narutowicza 11/12, Poland, Gdańsk, Poland
    17:45 - 18:00 | Precursor Design for Metal Chalcogenide Nanofilms as Catalysts for HER in Electrochemical Water Splitting.David PATRUN, University of Cologne, Cologne, Germany
    Lasse JÜRGENSEN, University of Cologne, Cologne, Germany
    Thomas FISCHER, University of Cologne, Cologne, Germany
    Ziyaad AYTUNA, University of Cologne, Cologne, Germany
    Sanjay MATHUR, University of Cologne, Cologne, Germany

    person_pinDavid PATRUN, University of Cologne, Cologne, Germany
    18:00 - 18:15 | Metal Alkoxides Derived High Entropy Oxides: A Design Strategy For Efficient Oxygen Evolution Reaction (OER) ElectrocatalystsZiyaad AYTUNA, University of Cologne, Institute of Inorganic Chemistry, Cologne, Germany
    Aman BHARDWAJ, University of Cologne, Institute of Inorganic Chemistry, Cologne, Germany
    Michael WILHELM, University of Cologne, Institute of Inorganic Chemistry, Cologne, Germany
    Sanjay MATHUR, University of Cologne, Institute of Inorganic Chemistry, Cologne, Germany

    person_pinZiyaad AYTUNA, University of Cologne, Institute of Inorganic Chemistry, Cologne, Germany
    HL17:00 - 17:30 | Ceramic finger joint implants: AI designed and manufactured by direct shaping methodsDaniel SCHUMACHER, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Hermsdorf, Germany
    Sabine BEGAND, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Hermsdorf, Germany
    Eveline ZSCHIPPANG, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden, Germany
    Eric SCHWARZER-FISCHER, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden, Germany

    person_pinDaniel SCHUMACHER, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Hermsdorf, Germany
    17:30 - 17:45 | Effect of architecture topology on the properties of YSZ scaffolds for bone regeneration by filament extrusion 3D printingVictoria AXELRAD TINOCO, Universidad de Castilla-La Mancha E.T.S.I. INDUSTRIAL – INEI | Avda. Camilo Jose Cela s/n 13071 Ciudad Real, Ciudad Real, Spain
    Javier HIDALGO, Universidad de Castilla-La Mancha E.T.S.I. INDUSTRIAL – INEI | Avda. Camilo Jose Cela s/n 13071 Ciudad Real, Ciudad Real, Spain
    Cristina BERGES, Universidad de Castilla-La Mancha E.T.S.I. INDUSTRIAL – INEI | Avda. Camilo Jose Cela s/n 13071 Ciudad Real, Ciudad Real, Spain
    Juan Alfonso NARANJO, Universidad de Castilla-La Mancha E.T.S.I. INDUSTRIAL – INEI | Avda. Camilo Jose Cela s/n 13071 Ciudad Real, Ciudad Real, Spain
    Gemma HERRANZ, Universidad de Castilla-La Mancha E.T.S.I. INDUSTRIAL – INEI | Avda. Camilo Jose Cela s/n 13071 Ciudad Real, Ciudad Real, Spain

    person_pinVictoria AXELRAD TINOCO, Universidad de Castilla-La Mancha E.T.S.I. INDUSTRIAL – INEI | Avda. Camilo Jose Cela s/n 13071 Ciudad Real, Ciudad Real, Spain
    Javier HIDALGO, Universidad de Castilla-La Mancha E.T.S.I. INDUSTRIAL – INEI | Avda. Camilo Jose Cela s/n 13071 Ciudad Real, Ciudad Real, Spain
    17:45 - 18:00 | Lithographic additive manufacturing of defined open-porous scaffolds from tricalcium phosphate and hydroxyapatite  Martin SCHWENTENWEIN, Lithoz GmbH, Vienna, Austria
    Daniel BOMZE, Lithoz GmbH, Vienna, Austria

    person_pinMartin SCHWENTENWEIN, Lithoz GmbH, Vienna, Austria
    18:00 - 18:15 | Micro and nanoarchitecture of 3D printed ceramic scaffolds for osteoconduction and bone augmentation.  Franz E. WEBER, University of Zurich, Center Dental Medicine, Oral Biotechnology & Bioengineering, Zurich, Switzerland

    person_pinFranz E. WEBER, University of Zurich, Center Dental Medicine, Oral Biotechnology & Bioengineering, Zurich, Switzerland
    18:15 - 18:30 | Effect of a Ball milling Treatment on mechanical and in vitro biological properties of Bioactive Glass-Hydroxyapatite compositesDamiano ANGIONI, Dip. Ing. Meccanica, Chimica e dei Materiali, University of Cagliari, Italy, Cagliari, Italy
    Roberto ORRU', Dip. Ing. Meccanica, Chimica e dei Materiali, University of Cagliari, Italy, Cagliari, Italy
    Giacomo CAO, Dip. Ing. Meccanica, Chimica e dei Materiali, University of Cagliari, Italy, Cagliari, Italy
    Devis BELLUCCI, Dipartimento di Ingegneria “Enzo Ferrari”, University of Modena and Reggio Emilia, Italy, Modena, Italy
    Valeria CANNILLO, Dipartimento di Ingegneria “Enzo Ferrari”, University of Modena and Reggio Emilia, Italy, Modena, Italy

    person_pinRoberto ORRU', Dip. Ing. Meccanica, Chimica e dei Materiali, University of Cagliari, Italy, Cagliari, Italy
    18:30 - 18:45 | Calcium phosphate bioceramics fabricated by 3D-printing. Current advances and issuesMehdi MOHAMMADI, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
    Bartolomeo COPPOLA, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
    Elisa FIUME, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
    Laura MONTANARO, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
    Jean-Marc TULLIANI, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
    Paola PALMERO, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy

    person_pinPaola PALMERO, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
    18:45 - 19:00 | Bone tissue engineering challenging: Mimicking human bone architecture  Paul DANTY, University Limoges, CNRS IRCER, UMR 7315, Limoges, France
    Amandine MAGNAUDEIX , University Limoges, CNRS IRCER, UMR 7315, Limoges, France
    Emeline RENAUDIE, University Limoges, CNRS IRCER, UMR 7315, Limoges, France
    Fanny LEBORGNE, Pprime Institute, CNRS, UPR 3346, Poitiers, France
    Vincent PATELOUP, University Limoges, CNRS IRCER, UMR 7315, Limoges, France
    Valéry VALLÉ, Pprime Institute, CNRS, UPR 3346, Poitiers, France
    Eric CHAMPION, University Limoges, CNRS IRCER, UMR 7315, Limoges, France
    Patricia PASCAUD-MATHIEU, University Limoges, CNRS IRCER, UMR 7315, Limoges, France

    person_pinPaul DANTY, University Limoges, CNRS IRCER, UMR 7315, Limoges, France
    17:00 - 17:30 | About the exchange-bias feature in magnetically contrasted oxide-based SPSed nanoconsolidatesThomas GAUDISSON, Université Paris Cité, Paris, France
    Nancy FLORES, Université Paris Cité, Paris, France
    Giulia FRANCESCHIN, Université Paris Cité, Paris, France
    Sophie NOWAK, Université Paris Cité, Paris, France
    Souad AMMAR, Université Paris Cité, Paris, France

    person_pinSouad AMMAR, Université Paris Cité, Paris, France
    17:30 - 18:00 | Perspectives on functionally graded ceramicsOmer VAN DER BIEST, Department of Materials Engineering, KU Leuven, Leuven, Belgium

    person_pinOmer VAN DER BIEST, Department of Materials Engineering, KU Leuven, Leuven, Belgium
    18:00 - 18:30 | Routes for deriving nanostructured ceramics suitable for smart materialsVilko MANDIC, Faculty of Chemical Engineering and Technology, University of Zagreb, Zagreb, Croatia
    Ivana PANŽIC, Materials Center Leoben Forschung GmbH, Leoben, Austria

    person_pinVilko MANDIC, Faculty of Chemical Engineering and Technology, University of Zagreb, Zagreb, Croatia
    18:30 - 19:00 | Transparent ceramic materials: enabling new and multifunctional optical and photonic applicationsYiquan WU, New York State College of Ceramics, Alfred University , Alfred , United States

    person_pinYiquan WU, New York State College of Ceramics, Alfred University , Alfred , United States
    K08:30 - 09:00 | 3D printing of ceramics with locally controlled microstructureHortense LE FERRAND, Nanyang Technological University, Singapore, Singapore

    person_pinHortense LE FERRAND, Nanyang Technological University, Singapore, Singapore
    09:00 - 09:15 | UV-assisted 3D shaping of single-phase ceramics and compositesJoanna TANSKA, Faculty of Chemistry, Warsaw University of Technology, Warsaw, Poland
    Radoslaw ZUROWSKI, Faculty of Chemistry, Warsaw University of Technology, Warsaw, Poland
    Anna WIECLAW-MIDOR, Faculty of Chemistry, Warsaw University of Technology, Warsaw, Poland
    Piotr WIECINSKI, Faculty of Chemistry, Warsaw University of Technology, Warsaw, Poland
    Pawel FALKOWSKI, Faculty of Chemistry, Warsaw University of Technology, Warsaw, Poland
    Paulina WIECINSKA, Faculty of Chemistry, Warsaw University of Technology, Warsaw, Poland

    person_pinJoanna TANSKA, Faculty of Chemistry, Warsaw University of Technology, Warsaw, Poland
    09:15 - 09:30 | Hybrid formulations of Pickering emulsions/suspensions based on natural clay for 3D printing of porous ceramicsLoïc MATHIEU, IRCER, Limoges, France
    Anne AIMABLE, IRCER, Limoges, France
    Julie BOURRET, IRCER, Limoges, France
    Cécile PAGNOUX, IRCER, Limoges, France
    Vincent PATELOUP, IRCER, Limoges, France

    person_pinLoïc MATHIEU, IRCER, Limoges, France
    09:30 - 09:45 | Influence of second phases in 3D-printed CeO2-stabilized zirconia composite ceramicsElisa FIUME, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino. , TORINO, Italy
    Barbara INSERRA, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino. , TORINO, Italy
    Bartolomeo COPPOLA, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino. , TORINO, Italy
    Laura MONTANARO, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino. , TORINO, Italy
    Jean Marc TULLIANI, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino. , TORINO, Italy
    Paola PALMERO, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino. , TORINO, Italy

    person_pinElisa FIUME, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino. , TORINO, Italy
    09:45 - 10:00 | Bioceramic-Carbon Composite Scaffolds from Masked Stereolithography of Silicone-based BlendsElsayed HAMADA , Department of Industrial Engineering, University of Padova, Padova, Italy
    Stabile FRANCO MATIAS, CETMIC, La Plata, Argentina
    Cimetta ELISA, Department of Industrial Engineering, University of Padova, Padova, Italy
    Enrico BERNARDO, Department of Industrial Engineering, University of Padova, Padova, Italy

    person_pinEnrico BERNARDO, Department of Industrial Engineering, University of Padova, Padova, Italy
    10:00 - 10:15 | Digital printing of nanoinks on glass-containing materials and surfacesMihails KUSNEZOFF, Fraunhofer IKTS, Dresden, Germany
    Marco FRITSCH, Fraunhofer IKTS, Dresden, Germany
    Sindy MOSCH, Fraunhofer IKTS, Dresden, Germany
    Nikolai TROFIMENKO, Fraunhofer IKTS, Dresden, Germany

    person_pinMihails KUSNEZOFF, Fraunhofer IKTS, Dresden, Germany
    10:15 - 10:30 | Pellet-based Fused Deposition Modeling of polycarbosilanes towards on-demand 3D silicon carbide-based objectsMaxime CHEYPE, Institute of Research for Ceramics, Limoges, France
    Fabrice ROSSIGNOL, Institute of Research for Ceramics, Limoges, France
    Vincent PATELOUP, Institute of Research for Ceramics, Limoges, France
    Samuel BERNARD, Institute of Research for Ceramics, Limoges, France

    person_pinMaxime CHEYPE, Institute of Research for Ceramics, Limoges, France
    K08:30 - 09:00 | Sintering-Assisted Additive Manufacturing TechnologiesEugene OLEVSKY, San Diego State University, San Diego, United States

    person_pinEugene OLEVSKY, San Diego State University, San Diego, United States
    09:00 - 09:15 | Transparent and translucent structural and functional ceramics prepared by HIP and SPSKarel MACA, Brno University of Technology, Brno, Czechia
    Katarína DRDLÍKOVÁ, Brno University of Technology, Brno, Czechia
    Daniel DRDLÍK, Brno University of Technology, Brno, Czechia
    Vijay BIJALWAN, Brno University of Technology, Brno, Czechia
    Róbert KLEMENT, Funglass Centre of Excellence, Trenčín, Slovakia
    DušAn GALUSEK, Funglass Centre of Excellence, Trenčín, Slovakia

    person_pinKarel MACA, Brno University of Technology, Brno, Czechia
    09:15 - 09:30 | Influence of LiF doping and Spark Plasma Sintering parameters on tricalcium phosphate transparencyMalgorzata GUZIK,
    Kacper PROKOP,
    Sandrine COTTRINO, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR 5510, 7 avenue Jean Capelle, 69621, Villeurbanne, Lyon, France
    Vincent GARNIER, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR 5510, 7 avenue Jean Capelle, 69621, Villeurbanne, Lyon, France
    Gilbert FANTOZZI, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR 5510, 7 avenue Jean Capelle, 69621, Villeurbanne, Lyon, France
    Yannick GUYOT, Univ Lyon, Institute Light Matter (iLM), UMR 5306 CNRS-Claude Bernard/Lyon1 University, 69622 Villeurbanne, Lyon, France
    Georges BOULON, Univ Lyon, Institute Light Matter (iLM), UMR 5306 CNRS-Claude Bernard/Lyon1 University, 69622 Villeurbanne, Lyon, France

    person_pinKacper PROKOP, University of Wrocław, Faculty of Chemistry, ul. F. Joliot-Curie 14, 50-383 , Wrocław, Poland; Łukasiewicz Research Network - PORT Polish Center for Technology Development, ul. 147 Stablowicka, 54-066 , Wrocław, Poland
    09:30 - 09:45 | Additive Manufacturing and Spark Plasma Sintering: Fabrication of Powder Components with Internal ChannelsElisa TORRESANI, San Diego State University, San Diego, United States
    Maricruz CARRILLO, San Diego State University, San Diego, United States
    Eugene OLEVSKY, San Diego State University, San Diego, United States
    Chris HAINES, US Army DEVCOM - Army Research Laboratory, Aberdeen Proving Ground, United States
    Darold MARTIN, US Army DEVCOM – Armaments Center, Picatinny Arsenal, United States

    person_pinElisa TORRESANI, San Diego State University, San Diego, United States
    09:45 - 10:00 | Targeting a specific SPS sintering window to densify tetragonal ZrO2 in one step: chemistry and experimental parameters interplayU-Chan CHUNG, Univ. Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    Etienne MARTIN, Univ. Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    Maria-Isabel RUA-TABORDA, Univ. Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    Sébastien FOURCADE, Univ. Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    Christine LABRUGÈRE-SARROSTE, Univ. Bordeaux, CNRS, PLACAMAT, UAR 3626, F-33600, Pessac, France
    Dominique MICHAU, Univ. Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    Guillaume CLERMONT, Univ. Bordeaux, CNRS, Bordeaux INP, ISM, UMR 5255, F-33400, Talence, France
    Marie-Anne DOURGES, Univ. Bordeaux, CNRS, Bordeaux INP, ISM, UMR 5255, F-33400, Talence, France
    Mathieu DUTTINE, Univ. Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    Fabrice MAUVY, Univ. Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    Mario MAGLIONE, Univ. Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    Graziella GOGLIO, Univ. Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    Catherine ELISSALDE, Univ. Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France

    person_pinU-Chan CHUNG, Univ. Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    10:00 - 10:15 | An in-depth investigation by Raman, TEM and Impedance Spectroscopy of Field-assisted sintered Barium Strontium Titanate ceramicsCamila RIBEIRO, Department of Materials and Ceramic Engineering, CICECO – Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    Alexander TKACH, Department of Materials and Ceramic Engineering, CICECO – Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    Fátima ZORRO, International Iberian Nanotechnology Laboratory - INL, Braga, Portugal
    Paulo FERREIRA, International Iberian Nanotechnology Laboratory - INL, Braga, Portugal
    Jacques NOUDEM, Normandie Univ, ENSICAEN, UNICAEN, CNRS, CRISMAT, Caen, France
    Rui VILARINHO, IFIMUP, Department of Physics and Astronomy, Faculty of Sciences, University of Porto, Porto, Portugal
    Mariana M. GOMES, IFIMUP, Department of Physics and Astronomy, Faculty of Sciences, University of Porto, Porto, Portugal
    J. Agostinho MOREIRA, IFIMUP, Department of Physics and Astronomy, Faculty of Sciences, University of Porto, Porto, Portugal
    M. Elisabete COSTA, Department of Materials and Ceramic Engineering, CICECO – Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    Paula VILARINHO, Department of Materials and Ceramic Engineering, CICECO – Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal

    person_pinCamila RIBEIRO, Department of Materials and Ceramic Engineering, CICECO – Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    10:15 - 10:30 | Optimizing nanostructure of Yttria-Stabilized Zirconia (YSZ) using low-temperature sintering processesJulien DE LANDTSHEER, CIRIMAT, CNRS-INP-UPS, Université TOULOUSE III-Paul Sabatier, 118 Route de Narbonne, 31062, Toulouse, France
    Thomas HERISSON DE BEAUVOIR, CIRIMAT, CNRS-INP-UPS, Université TOULOUSE III-Paul Sabatier, 118 Route de Narbonne, 31062, Toulouse, France
    Alicia WEIBEL, CIRIMAT, CNRS-INP-UPS, Université TOULOUSE III-Paul Sabatier, 118 Route de Narbonne, 31062, Toulouse, France
    Geoffroy CHEVALLIER, CIRIMAT, CNRS-INP-UPS, Université TOULOUSE III-Paul Sabatier, 118 Route de Narbonne, 31062, Toulouse, France
    Matthew SUCHOMEL, Université de Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    Graziella GOGLIO, Université de Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    Gilles PHILIPPOT, Université de Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    Yoan DENIS, Université de Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    Helen REVERON, Université de Lyon, INSA de Lyon, Université Claude Bernard Lyon 1, CNRS, MATEIS, UMR5510,69621, Villeurbanne, France
    Jérôme CHEVALIER, Université de Lyon, INSA de Lyon, Université Claude Bernard Lyon 1, CNRS, MATEIS, UMR5510,69621, Villeurbanne, France
    Catherine ELISSALDE, Université de Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    Claude ESTOURNES, CIRIMAT, CNRS-INP-UPS, Université TOULOUSE III-Paul Sabatier, 118 Route de Narbonne, 31062, Toulouse, France

    person_pinJulien DE LANDTSHEER, CIRIMAT, CNRS-INP-UPS, Université TOULOUSE III-Paul Sabatier, 118 Route de Narbonne, 31062, Toulouse, France
    K08:30 - 09:00 | 3D printing of reaction-bonded silicon carbide: from lab experiments to serial productionPhilipp GINGTER, Schunk Ingenieurkeramik GmbH, Willich, Germany
    Clara MINAS-PAYAMYAR, Schunk Ingenieurkeramik GmbH, Willich, Germany
    Lars SCHNETTER, Schunk Ingenieurkeramik GmbH, Willich, Germany
    Joachim HEYM, Schunk Ingenieurkeramik GmbH, Willich, Germany

    person_pinPhilipp GINGTER, Schunk Ingenieurkeramik GmbH, Willich, Germany
    09:00 - 09:15 | From research to industry: the evolution of ceramic 3D printing and concrete success storiesArnaud ROUX, 3DCeram Sinto, Bonnac La Côte, France

    person_pinArnaud ROUX, 3DCeram Sinto, Bonnac La Côte, France
    09:15 - 09:30 | Multi-material printing of reaction-bonded carbides by robocasting  Larissa WAHL, Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen, Germany
    Nahum TRAVITZKY, Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen, Germany

    person_pinLarissa WAHL, Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen, Germany
    09:30 - 09:45 | Green density improvement of SiC BJ printed parts by infusion assisted method with formation of hierarchical RBSiC microstructureDenis ZOLOTARYOV, The Israel Institute of Materials Manufacturing Technologies, Technion R&D Foundation, Haifa, Israel
    Muller GARY , The Israel Institute of Materials Manufacturing Technologies, Technion R&D Foundation, Haifa, Israel
    Fiks DAVID, Israel Ceramic and Silicate Institute, Haifa, Israel
    Kazakin MICHAEL , The Israel Institute of Materials Manufacturing Technologies, Technion R&D Foundation, Haifa, Israel
    Kenig SAMUEL, Israel Plastics and Rubber Center, Ramat Gan, Israel

    person_pinDenis ZOLOTARYOV, The Israel Institute of Materials Manufacturing Technologies, Technion R&D Foundation, Haifa, Israel
    09:45 - 10:00 | Thermally assisted extrusion-based 3D printing of continuous carbon fiber-reinforced SiC compositesSai LI, Xi’an Jiaotong University, Xi’an, China
    Zhongliang LU, Xi’an Jiaotong University, Xi’an, China
    Kai MIAO, Xi’an Jiaotong University, Xi’an, China

    person_pinSai LI, Xi’an Jiaotong University, Xi’an, China
    10:00 - 10:15 | Zetamix : 3D printing of technical ceramic by Fused Filament FabricationGuillaume DE CALAN,
    Romain FAYE,
    Julien SOURICE,
    Guillaume BOUCHET,

    person_pinGuillaume DE CALAN, ZETAMIX, Palaiseau, France; NANOE, Ballainvilliers, France
    10:15 - 10:30 | Ceramic Additive Manufacturing as a service: the easiest way to use and adopt ceramic 3D printing. Vincent POIRIER, CEO NOVADDITIVE  Vincent POIRIER, NOVADDITIVE, Tarbes, France

    person_pinVincent POIRIER, NOVADDITIVE, Tarbes, France
    HL08:30 - 09:00 | Accelerated Development of New Accident-Tolerant Fuel (ATF) Cladding Materials using Binary (SiC) & Ternary (MAX Phases) CarbidesKonstantina LAMBRINOU, University of Huddersfield, Huddersfield, United Kingdom
    Christophe LORRETTE, CEA, Gif-sur-Yvette Cedex, France
    Edward LAHODA, Westinghouse Electric Company LLC, Pittsburg, United States
    Tatsuya HINOKI, Kyoto University, Kyoto, Japan
    Monica FERRARIS, Politecnico di Torino (POLITO), Torino, Italy
    James MARROW, University of Oxford, Oxford, United Kingdom
    Rik-Wouter BOSCH, SCK CEN, Mol, Belgium
    Mirco GROSSE, KIT, Eggenstein-Leopoldshafen, Germany
    Philippe GOUAT, SCK CEN, Mol, Belgium
    Moritz TO BABEN, GTT-Technologies, Herzogenrath, Germany
    Jochen SCHNEIDER, RWTH Aachen University, Aachen , Germany
    Jonathan HINKS, University of Huddersfield, Huddersfield, United Kingdom
    Per PERSSON, Linköping University, Linköping , Sweden
    Jozef VLEUGELS, KU Leuven, Leuven, Belgium

    person_pinKonstantina LAMBRINOU, University of Huddersfield, Huddersfield, United Kingdom
    09:00 - 09:15 | High temperature wear resistant, electroconductive, stabile in oxygen and hydrogen environments Ti-Al-C MAX phases coatingsTetiana PRIKHNA,
    Orest OSTASH, Karpenko Physical-Mechanical Institute of the National Academy of Sciences of Ukraine, 5 Naukova St., Lviv, 79060, Ukraine, Lviv, Ukraine
    Alexander KUPRIN, National Science Center Kharkiv Institute of Physics and Technology, 1, Akademicheskaya St., Kharkov, 61108, Ukraine, Kharkiv, Ukraine
    Viktoriya PODHURSKA, Karpenko Physical-Mechanical Institute of the National Academy of Sciences of Ukraine, 5 Naukova St., Lviv, 79060, Ukraine, Lviv, Ukraine
    Volodymyr SVERDUN, Institute for Superhard Materials of the National Academy of Sciences of Ukraine, Kyiv, Ukraine
    Tetiana SERBENYUK, Institute for Superhard Materials of the National Academy of Sciences of Ukraine, Kyiv, Ukraine
    Bernd BÜCHNER, Leibniz-Institut für Festkörper- und Werkstoffforschung Dresden e. V. Helmholtzstraße 20, Dresden 01069, Germany, Dresden, Germany
    Julia HUFENBACH, Leibniz-Institut für Festkörper- und Werkstoffforschung Dresden e. V. Helmholtzstraße 20, Dresden 01069, Germany, Dresden, Germany

    person_pinTetiana PRIKHNA, Institute for Superhard Materials of the National Academy of Sciences of Ukraine, Kyiv, Ukraine; Leibniz-Institut für Festkörper- und Werkstoffforschung Dresden e. V. Helmholtzstraße 20, Dresden 01069, Germany, Dresden, Germany
    09:15 - 09:30 | Solid-state reaction synthesis of TAC-type MAX phases to form dense coatings at room temperature by Aerosol Deposition methodOscar ROJAS, CTTC -Centre de Transfert de Technologies Céramiques, Limoges, France
    Laurence BOYER, CTTC -Centre de Transfert de Technologies Céramiques, Limoges, France
    Olivier DURAND, CTTC -Centre de Transfert de Technologies Céramiques, Limoges, France
    Pierre SALLOT, Safran Tech, Materials and Processes, Châteaufort, France

    person_pinOscar ROJAS, CTTC -Centre de Transfert de Technologies Céramiques, Limoges, France
    09:30 - 09:45 | Deviations between film and target compositions during magnetron sputtering from M2-Al-C (M = Cr, Zr, and Hf) composite targetsYu-Ping CHIEN, Materials Chemistry, RWTH Aachen University, Aachen, Germany
    Stanislav MRAZ, Materials Chemistry, RWTH Aachen University, Aachen, Germany
    Matej FEKETE, Materials Chemistry, RWTH Aachen University, Aachen, Germany
    Marcus HANS, Materials Chemistry, RWTH Aachen University, Aachen, Germany
    Daniel PRIMETZHOFER, Department of Physics and Astronomy, Uppsala University, Uppsala, Sweden
    Szilard KOLOZSVARI, Plansee Composite Materials GmbH, Lechbruck am See, Germany
    Peter POLCIK, Plansee Composite Materials GmbH, Lechbruck am See, Germany
    Jochen SCHNEIDER, Materials Chemistry, RWTH Aachen University, Aachen, Germany

    person_pinYu-Ping CHIEN, Materials Chemistry, RWTH Aachen University, Aachen, Germany
    09:45 - 10:00 | Structure and properties of TiNbVTaZrHf-xN coatings deposited by reactive DC magnetron  and High Target Utilization SputteringFrantišEk LOFAJ, Institute of Materials Research of SAS, Kosice, Slovakia
    Lenka KVETKOVÁ, Institute of Materials Research of SAS, Kosice, Slovakia
    Petra HVIŠCOVÁ, Institute of Materials Research of SAS, Kosice, Slovakia
    Margita KABÁTOVÁ, Institute of Materials Research of SAS, Kosice, Slovakia
    Tomáš ROCH, Faculty of Physics, Mathematics and Informatics, Comenius University in Bratislava, Bratislava, Slovakia
    Tomáš FIANTOK, Faculty of Physics, Mathematics and Informatics, Comenius University in Bratislava, Bratislava, Slovakia
    Vladimír GIRMAN, Faculty of Science, Pavol Jozef Šafárik University in Košice, Kosice, Slovakia

    person_pinFrantišEk LOFAJ, Institute of Materials Research of SAS, Kosice, Slovakia
    10:00 - 10:15 | Solid solution mechanism in sintering of (ZrTiTaV)C high-entropy carbideChong WEI, Northwestern Polytechnical University, XI'AN, China
    Biao PENG, Northwestern Polytechnical University, XI'AN, China
    Cheng ZHANG, Northwestern Polytechnical University, XI'AN, China
    Xiaoqiang LI, Northwestern Polytechnical University, XI'AN, China

    person_pinChong WEI, Northwestern Polytechnical University, XI'AN, China
    10:15 - 10:30 | Microstructure, mechanical and wear characteristics of dual-phase high-entropy ceramic  Annamaria NAUGHTON DUSZOVA, The Institute of Materials Research, Slovak Academy of Sciences, Kosice, Slovakia

    person_pinAnnamaria NAUGHTON DUSZOVA, The Institute of Materials Research, Slovak Academy of Sciences, Kosice, Slovakia
    HL08:30 - 09:00 | Microstructural and mechanical properties of different ultra-high temperature CMCs: tensile and flexural strength up to 1800°CPietro GALIZIA, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics (CNR - ISSMC; former ISTEC), , Faenza, Italy
    Diletta SCITI, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics (CNR - ISSMC; former ISTEC), , Faenza, Italy
    Jon BINNER, School of Metallurgy and Materials - University of Birmingham, Birmingham, United Kingdom
    Vinothini VENKATACHALAM, School of Metallurgy and Materials - University of Birmingham, Birmingham, United Kingdom
    Miguel. A. LAGOS ANGEL, TECNALIA, Basque Research and Technology Alliance (BRTA), Donostia-San Sebastián, Spain
    Francesca SERVADEI, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics (CNR - ISSMC; former ISTEC), , Faenza, Italy
    Antonio VINCI, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics (CNR - ISSMC; former ISTEC), , Faenza, Italy
    Luca ZOLI, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics (CNR - ISSMC; former ISTEC), , Faenza, Italy
    Thomas REIMER, DLR German Aerospace Center, Institute of Structures and Design, Stuttgart, Germany

    person_pinPietro GALIZIA, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics (CNR - ISSMC; former ISTEC), , Faenza, Italy
    09:00 - 09:15 | Advanced hierarchical biomorphous silicon carbidesPatrizia HOFFMANN, Universität Erlangen-Nürnberg Institute of Glass and Ceramics, 91058 Erlangen, Germany
    Tobias FEY, Universität Erlangen-Nürnberg Institute of Glass and Ceramics, 91058 Erlangen, Germany

    person_pinPatrizia HOFFMANN, Universität Erlangen-Nürnberg Institute of Glass and Ceramics, 91058 Erlangen, Germany
    09:15 - 09:30 | Tribological studies of low wear CMC friction pairings compared to a standard friction pairingThorsten OPEL, Chair of Ceramic Materials Engineering, University of Bayreuth, Bayreuth, Germany
    Nico LANGHOF, Chair of Ceramic Materials Engineering, University of Bayreuth, Bayreuth, Germany
    Walter KRENKEL, Chair of Ceramic Materials Engineering, University of Bayreuth, Bayreuth, Germany
    Stefan SCHAFFÖNER, Chair of Ceramic Materials Engineering, University of Bayreuth, Bayreuth, Germany

    person_pinThorsten OPEL, Chair of Ceramic Materials Engineering, University of Bayreuth, Bayreuth, Germany
    09:30 - 09:45 | Development of an ultra-fast laser heating system: pyrolysis process into polymer matrix composite materials.Victor ASENSIO, Laboratory of Thermostructural Composites (LCTS) - University of Bordeaux, (UMR 5801 : CNRS, CEA, SAFRAN, UB), Pessac, France
    David DAMIANI,
    Francis REBILLAT, Laboratory of Thermostructural Composites (LCTS) - University of Bordeaux, (UMR 5801 : CNRS, CEA, SAFRAN, UB), Pessac, France
    Antonio COSCULLUELA,

    person_pinVictor ASENSIO, Laboratory of Thermostructural Composites (LCTS) - University of Bordeaux, (UMR 5801 : CNRS, CEA, SAFRAN, UB), Pessac, France
    09:45 - 10:00 | Damage monitoring of SiCf/SiC Ceramic Matrix Composites using Acoustic Emission and Extensometry during Stepped Fatigue TestingJordan STEPHEN, Institute of Structural Materials, Swansea University, Swansea, United Kingdom
    Zak QUINEY, Institute of Structural Materials, Swansea University, Swansea, United Kingdom
    Gonzalo GARCIA LUNA, Rolls Royce Plc, Derby, United Kingdom
    Stephen PATTISON, Rolls Royce Plc, Derby, United Kingdom
    Spencer JEFFS, Institute of Structural Materials, Swansea University, Swansea, United Kingdom

    person_pinJordan STEPHEN, Institute of Structural Materials, Swansea University, Swansea, United Kingdom
    10:00 - 10:15 | The Influence of Stress Concentrations on Localised Acoustic Emission in SiCf/SiC Ceramic Matrix Composites under Tensile LoadingZak QUINEY, Swansea University Institute of Structural Materials (ISM), Swansea, United Kingdom
    Connor BOYLE, Swansea University Institute of Structural Materials (ISM), Swansea, United Kingdom
    Jordan STEPHEN, Swansea University Institute of Structural Materials (ISM), Swansea, United Kingdom
    Chris NEWTON, Swansea University Institute of Structural Materials (ISM), Swansea, United Kingdom
    Gonzalo GARCIA LUNA, Rolls-Royce Plc., Derby, United Kingdom
    Stephen PATTISON, Rolls-Royce Plc., Derby, United Kingdom
    Martin BACHE, Swansea University Institute of Structural Materials (ISM), Swansea, United Kingdom
    Spencer JEFFS, Swansea University Institute of Structural Materials (ISM), Swansea, United Kingdom

    person_pinZak QUINEY, Swansea University Institute of Structural Materials (ISM), Swansea, United Kingdom
    K08:30 - 09:00 | Thermodynamic database for the refractories and high temperature ceramicsIn-Ho JUNG, Seoul National University, Seoul, South Korea

    person_pinIn-Ho JUNG, Seoul National University, Seoul, South Korea
    09:00 - 09:15 | Thermochemistry of Corrosion of Ceramic Coating Materials by Silicate MeltsGustavo COSTA, NASA, Cleveland, United States

    person_pinGustavo COSTA, NASA, Cleveland, United States
    09:15 - 09:30 | High Temperature Electrochemical Studies of Stainless Steel-Ceramic Composites in reference to molten aluminum alloyPiotr MALCZYK, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    Marcel MANDEL, Institute of Materials Engineering, TU Bergakademie Freiberg, Freiberg, Germany
    Serhii YAROSHEVSKYI, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    Christian WEIGELT, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    Tilo ZIENERT, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    Lutz KRÜGER, Institute of Materials Engineering, TU Bergakademie Freiberg, Freiberg, Germany
    Christos ANEZIRIS, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany

    person_pinPiotr MALCZYK, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    09:30 - 09:45 | Calculation of mass transfer for rotating finger test equipmentBurhanuddin BURHANUDDIN, Montanuniversitaet Leoben, Leoben, Austria
    Harald HARMUTH, Montanuniversitaet Leoben, Leoben, Austria
    Jerónimo GUARCO,

    person_pinBurhanuddin BURHANUDDIN, Montanuniversitaet Leoben, Leoben, Austria
    09:45 - 10:00 | A method for calculation of erosion parameters in refractory erosion by meltsJeronimo GUARCO,
    Sandra VOLLMANN, Chair of Ceramics, Montanuniversität Leoben, Leoben, Austria
    Harald HARMUTH, Chair of Ceramics, Montanuniversität Leoben, Leoben, Austria
    Burhanuddin BURHANUDDIN, Chair of Ceramics, Montanuniversität Leoben, Leoben, Austria

    person_pinJeronimo GUARCO, Chair of Ceramics, Montanuniversität Leoben, Leoben, Austria; K1-MET GmbH, Linz, Austria
    10:00 - 10:15 | Thermodynamic assessment of ternary Al-M-O (M=Nb, Ta) systems to enhance the development ?of coarse-grained refractory compositesJulian GEBAUER, Karlsruhe Institute of Technology, Institute for Applied Materials - Applied Materials Physics, Eggenstein-Leopoldshafen, Germany
    Peter FRANKE, Karlsruhe Institute of Technology, Institute for Applied Materials - Applied Materials Physics, Eggenstein-Leopoldshafen, Germany
    Hans J. SEIFERT, Karlsruhe Institute of Technology, Institute for Applied Materials - Applied Materials Physics, Eggenstein-Leopoldshafen, Germany

    person_pinJulian GEBAUER, Karlsruhe Institute of Technology, Institute for Applied Materials - Applied Materials Physics, Eggenstein-Leopoldshafen, Germany
    10:15 - 10:30 | Viscosity and solubility limit: two key parameters to prevent refractory corrosion by slagJacques POIRIER, CEMHTI-CNRS / University of Orleans, Orleans, France

    person_pinJacques POIRIER, CEMHTI-CNRS / University of Orleans, Orleans, France
    K08:30 - 09:00 | The corrosion resistance of stabilized zirconia in pure hydrogen atmosphereJennifer ASTOVEZA, IMERYS, Paris, France
    Jean-Michel AUVRAY, IMERYS, Paris, France
    Eric FRIER, IMERYS, Paris, France
    Rose-Marie MINEAU, IMERYS, Paris, France
    Christoph WÖHRMEYER, IMERYS, Paris, France

    person_pinJennifer ASTOVEZA, IMERYS, Paris, France
    HL09:00 - 09:30 | Application of flame-sprayed ceramic coatings on silica-based insulating refractories for steel ingot castingFlorian KERBER, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Marc NEUMANN, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Tilo ZIENERT, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Thomas SCHEMMEL, Refratechnik Steel GmbH, Research & Development, Düsseldorf, Germany
    Helge JANSEN, Refratechnik Steel GmbH, Research & Development, Düsseldorf, Germany
    Christos G. ANEZIRIS, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany

    person_pinFlorian KERBER, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    09:30 - 09:45 | Multicriteria optimization as enabler for Sustainable Ceramic Matrix CompositesDietmar KOCH, University of Augsburg, Augsburg, Germany
    Anna SCHNELLER, University of Augsburg, Augsburg, Germany
    Lars WIETSCHEL, University of Augsburg, Augsburg, Germany
    Andrea THORENZ, University of Augsburg, Augsburg, Germany

    person_pinDietmar KOCH, University of Augsburg, Augsburg, Germany
    09:45 - 10:00 | Characterization of Steel Ceramic Composite anodes for cryolite/aluminium environment based on recycled MgO-C bricksSerhii YAROSHEVSKYI, Techische Universität Bergakademie Freiberg, Institut für Keramik, Feuerfest und Verbundwerkstoffe, Freiberg, Germany
    Christian WEIGELT, Techische Universität Bergakademie Freiberg, Institut für Keramik, Feuerfest und Verbundwerkstoffe, Freiberg, Germany
    Piotr MALCZYK, Techische Universität Bergakademie Freiberg, Institut für Keramik, Feuerfest und Verbundwerkstoffe, Freiberg, Germany
    Jana HUBALKOVA, Techische Universität Bergakademie Freiberg, Institut für Keramik, Feuerfest und Verbundwerkstoffe, Freiberg, Germany
    Christos G. ANEZIRIS, Techische Universität Bergakademie Freiberg, Institut für Keramik, Feuerfest und Verbundwerkstoffe, Freiberg, Germany

    person_pinSerhii YAROSHEVSKYI, Techische Universität Bergakademie Freiberg, Institut für Keramik, Feuerfest und Verbundwerkstoffe, Freiberg, Germany
    10:00 - 10:15 | Influence of different metkaolins mixture on the geopolymers synthesis Wilfried N'CHO, IRCER, LIMOGES, France

    person_pinWilfried N'CHO, IRCER, LIMOGES, France
    10:15 - 10:30 | Influence of alkaline and iron precursors on geopolymer matrix at high temperature (1150 °C)Quentin CLIGNY, Institut de Recherche sur les Céramiques (UMR CNRS 7315), Centre Européen de la Céramique, Limoges, France
    Damien BRANDT, CEA, DAM, LE RIPAULT, F-37260 Monts, France
    Sylvie ROSSIGNOL, Institut de Recherche sur les Céramiques (UMR CNRS 7315), Centre Européen de la Céramique, Limoges, France

    person_pinQuentin CLIGNY, Institut de Recherche sur les Céramiques (UMR CNRS 7315), Centre Européen de la Céramique, Limoges, France
    HL08:30 - 09:00 | Development of glasses, glass-ceramics and composites in various glass systems suitable for drawing (bio)photonic fibers Laeticia PETIT, Tampere University, Tampere, Finland

    person_pinLaeticia PETIT, Tampere University, Tampere, Finland
    09:00 - 09:15 | In situ study of solidification paths of a liquid Al2O3-ZrO2-SiO2 mixtureMaureen YEMBELE,
    Vincent SAROU-KANIAN, CEMHTI CNRS, Orléans, France
    Emmanuel VERON, CEMHTI CNRS, Orléans, France
    Pierrick VESPA, Saint Gobain Research Provence, Cavaillon, France
    Emmanuel DE BILBAO, CEMHTI CNRS, Orléans, France

    person_pinMaureen YEMBELE, CEMHTI CNRS, Orléans, France; Saint Gobain Research Provence, Cavaillon, France
    09:15 - 09:30 | Yb3+ doped crystals in the glassNatalia VAKULA, Photonics Laboratory, Tampere University, Tampere, Finland
    Zhuorui LU,
    Michèle UDE, Université Côte d'Azur, Institut de Physique de Nice, Nice, France
    Martiane CABIÉ, Aix Marseille Univ, CNRS, Centrale Marseille, Marseille, France
    Thomas NEISIUS, Aix Marseille Univ, CNRS, Centrale Marseille, Marseille, France
    François ORANGE, Université Côte d'Azur, CCMA, Nice, France
    Franck PIGEONNEAU, MINES Paris, PSL Research University, CEMEF - Centre for material forming, Sophia Antipolis Cedex, France
    Wilfried BLANC, Université Côte d'Azur, Institut de Physique de Nice, Nice, France
    Laeticia PETIT, Photonics Laboratory, Tampere University, Tampere, Finland

    person_pinNatalia VAKULA, Photonics Laboratory, Tampere University, Tampere, Finland
    09:30 - 09:45 | Controlling the atomic structure and thermal conductivity of disordered SiO2 thin films using substrate surfacesKatelyn KIRCHNER,
    Melbert JEEM, Hokkaido University, Sapporo, Japan
    Sohei OGASAWARA, Hokkaido University, Sapporo, Japan
    Hiromichi OHTA, Hokkaido University, Sapporo, Japan
    Shinji KOHARA, National Institute for Materials Science (NIMS), Tsukuba, Japan
    Tomoyuki KOGANEZAWA, Japan Synchrotron Radiation Research Institute (JASRI), Hyogo, Japan
    Rosantha KUMARA, Japan Synchrotron Radiation Research Institute (JASRI), Hyogo, Japan
    Masaya FUJIOKA, Hokkaido University, Sapporo, Japan
    Junji NISHI, Hokkaido University, Sapporo, Japan
    Yasutaka MATSUO, Hokkaido University, Sapporo, Japan
    John MAURO, The Pennsylvania State University, University Park, United States
    Madoka ONO, Hokkaido University, Sapporo, Japan

    person_pinKatelyn KIRCHNER, The Pennsylvania State University, University Park, United States; Hokkaido University, Sapporo, Japan
    09:45 - 10:00 | Glass-Ceramics and Glasses for Microwave and THz ApplicationsJobin VARGHESE, Department of Hybrid Microsystems, Microsystems LTCC and HTCC, Fraunhofer IKTS, Winterbergstraße 28, 01277 Dresden, Germany, Dresden, Germany
    Martin IHLE, Department of Hybrid Microsystems, Microsystems LTCC and HTCC, Fraunhofer IKTS, Winterbergstraße 28, 01277 Dresden, Germany, Dresden, Germany
    Steffen ZIESCHE, Department of Hybrid Microsystems, Microsystems LTCC and HTCC, Fraunhofer IKTS, Winterbergstraße 28, 01277 Dresden, Germany, Dresden, Germany
    Uwe PARTSCH, Department of Hybrid Microsystems, Microsystems LTCC and HTCC, Fraunhofer IKTS, Winterbergstraße 28, 01277 Dresden, Germany, Dresden, Germany
    Marzena OLSZEWSKA-PLACHA , QWED Sp. z o.o., Krzywickiego 12/1, 02-078 Warsaw, Poland , Warsaw, Poland
    Janusz RUDNICKI, QWED Sp. z o.o., Krzywickiego 12/1, 02-078 Warsaw, Poland , Warsaw, Poland
    Beata SYNKIEWICZ-MUSIALSKA, Lukasiewicz Research Network-Institute of Microelectronics and Photonics, Kraków Division, ul. Zablocie 39, 30-701 Kraków, Poland, Kraków, Poland
    Dorota SZWAGIERCZAK, Lukasiewicz Research Network-Institute of Microelectronics and Photonics, Kraków Division, ul. Zablocie 39, 30-701 Kraków, Poland, Kraków, Poland
    Antonio CLEMENTE , CEA-Leti, Université Grenoble-Alpes, F-38000 Grenoble, France, Grenoble, France
    Samara GHARBIEH, CEA-Leti, Université Grenoble-Alpes, F-38000 Grenoble, France, Grenoble, France
    Hamza TURKI, Inoveos France, 6 Rue Pierre Milon 19100 Brive-la-Gaillarde, France, Brive-la-Gaillarde, France
    Vincent OLIVIER, Inoveos France, 6 Rue Pierre Milon 19100 Brive-la-Gaillarde, France, Brive-la-Gaillarde, France
    Bertrand LENOIR, Inoveos France, 6 Rue Pierre Milon 19100 Brive-la-Gaillarde, France, Brive-la-Gaillarde, France

    person_pinJobin VARGHESE, Department of Hybrid Microsystems, Microsystems LTCC and HTCC, Fraunhofer IKTS, Winterbergstraße 28, 01277 Dresden, Germany, Dresden, Germany
    10:00 - 10:15 | Investigation of joining mechanism of low-temperature borosilicate sealing glassesSathya NARAYANASAMY, Empa - Swiss Federal Laboratories for Material Science and Technology, Dübendorf, Switzerland
    Gurdial BLUGAN, Empa - Swiss Federal Laboratories for Material Science and Technology, Dübendorf, Switzerland

    person_pinSathya NARAYANASAMY, Empa - Swiss Federal Laboratories for Material Science and Technology, Dübendorf, Switzerland
    K08:30 - 09:00 | Aqueous chemical deposition of thin oxide films  Mari-Ann EINARSRUD, NTNU Norwegian University of Science and Technology, Trondheim, Norway

    person_pinMari-Ann EINARSRUD, NTNU Norwegian University of Science and Technology, Trondheim, Norway
    09:00 - 09:15 | Nd-doped TiO2 Mesoporous Self-supported Membranes Prepared by Colloidal Sol-gel Route and Tested as Adsorbents and Photocatalysts María Teresa COLOMER , Instituto de Cerámica y Vidrio (ICV), CSIC, Madrid, Spain
    Donaldo Fabio MERCADO, Grenoble INP, LMPG, Institute of Engineering, Université Grenoble Alpes, Grenoble, France
    Florencia VATTIER, Instituto de Ciencia de Materiales de Sevilla (ICMS), CSIC – Universidad de Sevilla, Sevilla, Spain
    Luz Marina BALLESTEROS, Centro de Investigaciones en Catálisis (@CICATUIS), Universidad Industrial de Santander, Bucaramanga, Colombia

    person_pinMaría Teresa COLOMER , Instituto de Cerámica y Vidrio (ICV), CSIC, Madrid, Spain
    09:15 - 09:30 | Elaboration of lead-free piezoelectric thick films by Aerosol DepositionAnass CHRIR, Institute of Research for Ceramics (UMR CNRS 7315), Limoges, France
    Oscar ROJAS, Center for Technology Transfers in Ceramics (CTTC), Limoges, France
    Laurence BOYER, Center for Technology Transfers in Ceramics (CTTC), Limoges, France
    Olivier DURAND, Center for Technology Transfers in Ceramics (CTTC), Limoges, France
    Pascal MARCHET, Institute of Research for Ceramics (UMR CNRS 7315), Limoges, France

    person_pinAnass CHRIR, Institute of Research for Ceramics (UMR CNRS 7315), Limoges, France
    09:30 - 09:45 | Preparation of lead magnesium niobate-based multicaloric composites using the aerosol deposition methodVictor REGIS DE MORAES,
    Matej ŠADL,
    Andreja BENCAN,
    Goran DRAŽIC,
    Hana URŠIC,

    person_pinVictor REGIS DE MORAES, Electronic Ceramics Department Jozef Stefan Institute, Ljubljana, Slovenia; Jožef Stefan International Postgraduate School, Ljubljana, Slovenia
    09:45 - 10:00 | Fabrication of the lead-free Na1/2Bi1/2TiO3-BaTiO3 piezoceramics by additive manufacturingAnastasia KUCHERYAVAYA, Institute of Chemistry and Technology of Materials, Graz University of Technology, Graz, Austria
    Yue LIU, Division Nonmetallic-Inorganic Materials, Department of Materials and Earth Sciences, Technical University of Darmstadt, Darmstadt, Germany
    Lovro FULANOVIC, Division Nonmetallic-Inorganic Materials, Department of Materials and Earth Sciences, Technical University of Darmstadt, Darmstadt, Germany
    Jurij KORUZA, Institute of Chemistry and Technology of Materials, Graz University of Technology, Graz, Austria

    person_pinAnastasia KUCHERYAVAYA, Institute of Chemistry and Technology of Materials, Graz University of Technology, Graz, Austria
    HL08:30 - 09:00 | Thick high energy density electrode fabrication and active material synthesis using Spark Plasma SinteringArina NADEINA,
    Vincent SUZNEC,

    person_pinVincent SUZNEC, Laboratoire de Réactivité et Chimie des Solides (LRCS), CNRS UMR 7314, Université de Picardie Jules Verne, Amiens , FRANCE; CIRIMAT, Université de Toulouse, CNRS, Université Toulouse 3 - Paul Sabatier, Toulouse, FRANCE
    09:00 - 09:15 | Silicon oxycarbide ceramic anodes for Na-ion batteriesAlper GÜNEREN,
    Zoltán LENCÉŠ, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Bratislava, Slovakia

    person_pinZoltán LENCÉŠ, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Bratislava, Slovakia
    09:15 - 09:30 | Sintering and thermal expansion behavior of glass-based sealants for α/β- Al2O3 joints in low-temperature Na-Zn chloride batteriesFabiana D'ISANTO, POLITECNICO DI TORINO- DISAT, Torino, Italy
    Andrea BAGGIO, POLITECNICO DI TORINO- DISAT, Torino, Italy
    Milena SALVO, POLITECNICO DI TORINO- DISAT, Torino, Italy
    Diego BASSO, FZSoNick S.A., Stabio, Switzerland
    Daniele GAIA, FZSoNick S.A., Stabio, Switzerland
    Fabrizio VAGLIANI, FZSoNick S.A., Stabio, Switzerland
    Alberto TURCONI, FZSoNick S.A., Stabio, Switzerland
    Federico SMEACETTO, POLITECNICO DI TORINO- DISAT, Torino, Italy

    person_pinFabiana D'ISANTO, POLITECNICO DI TORINO- DISAT, Torino, Italy
    09:30 - 09:45 | Assessing the Electrochemical Stability Window of LAGP Solid-State Electrolyte: The Role of Improved Electrical ContactVinicius Martins ZALLOCCO, Vitreous Materials Laboratory, São Carlos, Brazil
    Ana Candida Martins RODRIGUES, Vitreous Materials Laboratory, São Carlos, Brazil

    person_pinVinicius Martins ZALLOCCO, Vitreous Materials Laboratory, São Carlos, Brazil
    09:45 - 10:00 | First-principles and machine learning study of the structural properties of binary  and ternary tellurite based oxideglassy systemFiras Elkheir SHUAIB MOHAMMED, university of Limoges (IRCER-lab), Limoges, France

    person_pinFiras Elkheir SHUAIB MOHAMMED, university of Limoges (IRCER-lab), Limoges, France
    K08:30 - 09:15 | From archaeological to contemporary celadonsJean François FOUILHOUX, Maisons des Artistes , paris/ AIC Genève, p
    Armand DESBAT, Laboratoire ArAr UMR 5138, LYON, FRANCE

    person_pinJean François FOUILHOUX, Maisons des Artistes , paris/ AIC Genève, p
    Armand DESBAT, Laboratoire ArAr UMR 5138, LYON, FRANCE
    09:15 - 09:30 | Not just the vessels: tracing the Early Rus' commerce through medieval amphorae studiesAnastasiia KOROKHINA,
    Sylvie Yona WAKSMAN, CNRS UMR5138 "Archéologie & Archéométrie", Lyon, France
    Mariia TYMOSHENKO, Museum of Kyiv History, Kyiv, Ukraine
    Natalia KHAMAIKO,
    Maciej TRZECIECKI, Institute of Archaeology and Ethnology Polish Academy of Sciences, Warsaw, Poland
    Michal AUCH, Institute of Archaeology and Ethnology Polish Academy of Sciences, Warsaw, Poland
    Marcin WO?OSZYN,

    person_pinAnastasiia KOROKHINA, Leibniz Institute for the History and Culture of Eastern Europe (GWZO), Leipzig, Germany; Institute of Archaeology, National Academy of Sciences of Ukraine, Kyiv, Ukraine
    09:30 - 09:45 | Ceramics during the Middle Ages in Navarra: production centres, sources of raw materials and ceramics tradeIván RUIZ-ARDANAZ, University of Navarra, Chemistry Department (Irunlarrea, 1, Edificio de Investigación, 31008, Pamplona, Navarra), Spain
    Esther LASHERAS, University of Navarra, Chemistry Department (Irunlarrea, 1, Edificio de Investigación, 31008, Pamplona, Navarra), Spain
    Adrián DURÁN, University of Navarra, Chemistry Department (Irunlarrea, 1, Edificio de Investigación, 31008, Pamplona, Navarra), Spain

    person_pinIván RUIZ-ARDANAZ, University of Navarra, Chemistry Department (Irunlarrea, 1, Edificio de Investigación, 31008, Pamplona, Navarra), Spain
    09:45 - 10:00 | San Diego wreck ceramics and archaeometry of a global world  Alejandro PINILLA, Instituto de Historia, CSIC. Calle Albasanz, 26-28., 28037 Madrid, Spain
    Fatima QUIJADA, Instituto de Historia, CSIC. Calle Albasanz, 26-28., 28037 Madrid, Spain
    Fernando AGUA, Instituto de Historia, CSIC. Calle Albasanz, 26-28., 28037 Madrid, Spain
    Mangeles VILLEGAS, Instituto de Historia, CSIC. Calle Albasanz, 26-28., 28037 Madrid, Spain
    Susana GARCIA, Museo Naval. Paseo del Prado, 5., 28014 Madrid, Spain
    Manuel GARCIA-HERAS, Instituto de Historia, CSIC. Calle Albasanz, 26-28., 28037 Madrid, Spain

    person_pinManuel GARCIA-HERAS, Instituto de Historia, CSIC. Calle Albasanz, 26-28., 28037 Madrid, Spain
    10:00 - 10:15 | Technological and stylistic characteristics of Chupicuaro ceramic wares (Formative Mesoamerica)Fanny ALLOTEAU, Université Bordeaux Montaigne – Archéosciences Bordeaux, UMR CNRS 6034, Bordeaux, France
    Ayed BEN AMARA, Université Bordeaux Montaigne – Archéosciences Bordeaux, UMR CNRS 6034, Bordeaux, France
    Nadia CANTIN, Université Bordeaux Montaigne – Archéosciences Bordeaux, UMR CNRS 6034, Bordeaux, France
    Hector CABADAS BAEZ, Universidad Autónoma del Estado de México, UAEM – Faculty of Geography , Bordeaux, Mexico
    Alejandra CASTANEDA, Universidad Autónoma del Estado de México, UAEM – Faculty of Geography , Bordeaux, Mexico
    Sergey SEDOV, Universidad Autónoma del Estado de México, UAEM – Faculty of Geography , Bordeaux, Mexico
    Véronique DARRAS, Universidad Autónoma del Estado de México, UAEM – Faculty of Geography , Bordeaux, Mexico
    Georgina IBARRA, Universidad Autónoma del Estado de México, UAEM – Faculty of Geography , Bordeaux, Mexico

    person_pinFanny ALLOTEAU, Université Bordeaux Montaigne – Archéosciences Bordeaux, UMR CNRS 6034, Bordeaux, France
    10:15 - 10:30 | New insight into the provenance and technology of Byzantine Polychrome White WareYona WAKSMAN, CNRS UMR5138 "Archéologie & Archéométrie", Lyon, France
    Anne BOUQUILLON,
    Katerina AMPRAZOGOULA, Ephorate of antiquities of Chalkidiki and of the Mount Athos, Thessaloniki, Greece
    Aikaterini TSANANA, Ephorate of antiquities of Chalkidiki and of the Mount Athos, Thessaloniki, Greece

    person_pinYona WAKSMAN, CNRS UMR5138 "Archéologie & Archéométrie", Lyon, France
    08:30 - 09:00 | Refractories, Composites and Recyclates: Approaches for sustainability and strategic sovereigntyChristos ANEZIRIS, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    Patrick GEHRE, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    Jana HUBALKOVA, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    Tilo ZIENERT, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    Steffen DUDCZIG, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    Piotr MALCZYK, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    Serhii YAROSHEVSKYI, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany

    person_pinChristos ANEZIRIS, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    09:00 - 09:30 | Rapid Hot-pressed silicon carbide ceramics for ultra-high temperature applicationsPavol SAJGALIK, Slovak Academy of Sciences, Bratislava, Slovakia
    Ondrej HNAZEL, Slovak Academy of Sciences, Bratislava, Slovakia
    Alexandra KOVALCIKOVA, Slovak Academy of Sciences, Bratislava, Slovakia
    Zhang CHENGYU, North Western Polytechnic University, Xi´An, China
    Alexander MUKASYAN, University of Notre Dame, Notre Dame, IN, United States

    person_pinPavol SAJGALIK, Slovak Academy of Sciences, Bratislava, Slovakia
    09:30 - 10:00 | Electrical, thermal, and mechanical properties of porous solid-state sintered SiC ceramicsYoung-Wook KIM, University of Seoul, Seoul, Korea (Republic of)
    Yeong-Jun OH, University of Seoul, Seoul, Korea (Republic of)
    Kwang Ho KIM, Global Frontier R&D Center, Pusan National University, Busan, Korea (Republic of)

    person_pinYoung-Wook KIM, University of Seoul, Seoul, Korea (Republic of)
    10:00 - 10:30 | Review: Mechanical Properties of Porous Silicon Nitride Ceramics with Controlled MicrostructuresStuart HAMPSHIRE, University of Limerick, Limerick, Ireland
    Aránzazu DÍAZ-CUENCA,

    person_pinStuart HAMPSHIRE, University of Limerick, Limerick, Ireland
    HL08:30 - 09:00 | Backgrounds and clinical application of dental ceramic implantsJens TARTSCH, European Society for Ceramic Implantology, ESCI

    person_pinJens TARTSCH, European Society for Ceramic Implantology, ESCI
    K09:00 - 09:30 | Present status and future prospects of zirconia oral implantsRalf KOHAL, University of Freiburg, Faculty of Medicine, University of Freiburg, 79106 Freiburg,, Germany

    person_pinRalf KOHAL, University of Freiburg, Faculty of Medicine, University of Freiburg, 79106 Freiburg,, Germany
    09:30 - 09:45 | In vivo ageing of zirconia dental ceramicsPeter JEVNIKAR, University of Ljubljana , Slovenia

    person_pinPeter JEVNIKAR, University of Ljubljana , Slovenia
    09:45 - 10:00 | Translational fractography of one- and two-piece clinically failed zirconia implantsFei ZHANG,
    Mona MONZAVI, Periodontics and Ceramic Implantology (private practice), Santa Ana, United States
    Jef VLEUGELS, KU Leuven, Department of Materials Engineering, Heverlee, Belgium
    Bart VAN MEERBEEK, KU Leuven, Department of Oral Health Sciences, Leuven, Belgium

    person_pinFei ZHANG, KU Leuven, Department of Materials Engineering, Heverlee, Belgium; KU Leuven, Department of Oral Health Sciences, Leuven, Belgium
    10:00 - 10:15 | In vitro lifetime assessment of zirconia dental ceramicsChong WEI, Northwestern Polytechnical University, XI'AN, China
    Shibao LI, Fourth Military Medical University, XI'AN, China
    Laurent GREMILLARD, INSA-Lyon, Villeurbanne, France

    person_pinChong WEI, Northwestern Polytechnical University, XI'AN, China
    10:15 - 10:30 | Ceramics in Dental Applications: Favorable Surface Properties and Novel Manufacturing of Established MaterialsAlessandro Alan PORPORATI,
    Yvonne MÖDINGER, CeramTec GmbH, Plochingen, Germany

    person_pinAlessandro Alan PORPORATI, CeramTec GmbH, Plochingen, Germany; Universita' degli Studi di Trieste, Department of Engineering and Architecture, Trieste, Italy
    HL11:00 - 11:30 | Engineering of ceramic oxides microstructures using reactive Cold-Spark Plasma SinteringClaude ESTOURNES, CIRIMAT, TOULOUSE, France
    Julien DE LANDTSHEER,
    Mélanie ROUSSELLE,
    Geoffroy CHEVALLIER, CIRIMAT, TOULOUSE, France
    Alicia WEIBEL, CIRIMAT, TOULOUSE, France
    Florence ANSART, CIRIMAT, TOULOUSE, France
    Guillaume FRADET, SAFRAN AIRCRAFT ENGINES, Corbeil-Essonnes , France
    Catherine ELISSALDE, ICMCB, Pessac, France
    Thomas HERISSON DE BEAUVOIR, CIRIMAT, TOULOUSE, France

    person_pinClaude ESTOURNES, CIRIMAT, TOULOUSE, France
    11:30 - 11:45 | In-situ synthesis and sintering of Yb2SiO5 and Yb2Si2O7 minerals by pulsed electric current sintering and conventional sinteringShuigen HUANG, KU Leuven, heverlee, Belgium
    Konstantina LAMBRINOU, University of Huddersfield, Huddersfield , United Kingdom
    Jozef VLEUGELS, KU Leuven, heverlee, Belgium

    person_pinShuigen HUANG, KU Leuven, heverlee, Belgium
    11:45 - 12:00 | Development of Sintering Process Monitoring Method Using Nanosecond Pulsed Electric FieldTadachika NAKAYAMA, Nagaoka University of Technology, Nagaoka, Japan
    Hiroyuki SAITO, Nagaoka University of Technology, Nagaoka, Japan

    person_pinTadachika NAKAYAMA, Nagaoka University of Technology, Nagaoka, Japan
    12:00 - 12:15 | A novel two-stage flash sintering of fine-grain 3 mol% yttria stabilized zirconiaYejie CAO, Northwestern Polytechnical University, Xi'an，Shaanxi, China

    person_pinYejie CAO, Northwestern Polytechnical University, Xi'an，Shaanxi, China
    12:15 - 12:30 | Morphology control in BiFeO3: A spark plasma sintering studyJenna METERA, University of California San Diego, La Jolla, United States
    Everbrook ZHOU, University of California San Diego, La Jolla, United States
    Javier E. GARAY, University of California San Diego, La Jolla, United States
    Olivia A. GRAEVE, University of California San Diego, La Jolla, United States

    person_pinJenna METERA, University of California San Diego, La Jolla, United States
    12:30 - 12:45 | Rapid fabrication of transparent silica glass components using photocurable suspension: shaping finer structures from coarse modelMotoyuki IIJIMA, Yokohama National University, Yokohama, Japan
    Kengo NISHIYAMA, Yokohama National University, Yokohama, Japan
    Yoshihiko YAMANOI, Yokohama National University, Yokohama, Japan
    Junichi TATAMI, Yokohama National University, Yokohama, Japan

    person_pinMotoyuki IIJIMA, Yokohama National University, Yokohama, Japan
    12:45 - 13:00 | BSTO components using Rapid prototyping and different Gelcasting systemsJeevankumar PALLAGANI, School of Physics, University of Hyderabad, Hyderabad, India
    Poly ROSE, School of Physics, University of Hyderabad, Hyderabad, India
    Seshu Bai VUMMETHALA, School of Physics, University of Hyderabad, Hyderabad, India

    person_pinJeevankumar PALLAGANI, School of Physics, University of Hyderabad, Hyderabad, India
    HL11:00 - 11:30 | Minimizing anisotropy and cracking during co-sintering of layered ceramics: Examples for electronics, energy and catalysisDiletta GIUNTINI, Eindhoven University of Technology, Eindhoven, Netherlands

    person_pinDiletta GIUNTINI, Eindhoven University of Technology, Eindhoven, Netherlands
    11:30 - 11:45 | Nano-structured MgAl2O4 spinel fabricated by High Pressure Spark Plasma Sintering : effect of high pressure on microstructureSandrine COTTRINO, Laboratoire MATEIS, Villeurbanne, France
    Thomas GAUDISSON, Laboratoire ILM, Villeurbanne, France
    Thierry DOUILLARD , Laboratoire MATEIS, Villeurbanne, France
    Sylvie LE FLOCH, Laboratoire ILM, Villeurbanne, France

    person_pinSandrine COTTRINO, Laboratoire MATEIS, Villeurbanne, France
    11:45 - 12:00 | The Phase Evolution of Sr-hexaferrite during Rapid Sintering by Intense Thermal Radiation.  Aleksander UCAKAR,
    Andraž KOCJAN,
    Blaž BELEC, Materials Research Laboratory, University of Nova Gorica, Nova Gorica, Slovenia, Nova Gorica, Slovenia
    Janez KOŠIR, Department of Chemistry and Materials Science, Aalto University, Espoo, Finland, Espoo, Finland
    Tanja KALLIO, Department of Chemistry and Materials Science, Aalto University, Espoo, Finland, Espoo, Finland
    Petra JENUŠ,

    person_pinAleksander UCAKAR, Department for Nanostructured materials, Jožef Stefan Institute, Ljubljana, Slovenia, Ljubljana, Slovenia; Jožef Stefan International Postgraduate School, Ljubljana, Slovenia, Ljubljana, Slovenia; Center for Microscopy and Microanalysis, Jožef Stefan Institute, Ljubljana, Slovenia, Ljubljana, Slovenia
    12:00 - 12:15 | CeO2-doped aluminum nitride ceramics: influence of the sintering features on the working propertiesHatim SAIDI,
    Mickaël COEFFE-DESVAUX, Univ. Limoges, CNRS, IRCER, UMR 7315, 87000, Limoges, France
    Nicolas PRADEILLES, Univ. Limoges, CNRS, IRCER, UMR 7315, 87000, Limoges, France
    Mickaël JOINET, THALES AVS FRANCE, 38430, Moirans, France
    Alexandre MAITRE, Univ. Limoges, CNRS, IRCER, UMR 7315, 87000, Limoges, France

    person_pinHatim SAIDI, Univ. Limoges, CNRS, IRCER, UMR 7315, 87000, Limoges, France; THALES AVS FRANCE, 38430, Moirans, France
    12:15 - 12:30 | IR transparent Y2O3-MgO nanocomposite ceramic processed by sol-gel powder synthesis and a two-step SPS sintering techniqueNathan BRARD,
    Johan PETIT, DMAS, ONERA, Université Paris-Saclay, Châtillon, France
    Stéphane BACH,

    person_pinNathan BRARD, DMAS, ONERA, Université Paris-Saclay, Châtillon, France; ICMPE (Institute of Chemistry and Materials of Paris-Est), Thiais, France
    12:30 - 12:45 | Graphite-Cr composites sintered by SPS technique: Influence of the temperature and powder processing method on the propertiesJuan PIÑUELA-NOVAL, Nanomaterials and Nanotechnology Research Center (CINN-CSIC), El Entrego, Spain
    Daniel FERNÁNDEZ-GONZÁLEZ, Nanomaterials and Nanotechnology Research Center (CINN-CSIC), El Entrego, Spain
    Marta SUÁREZ, Nanomaterials and Nanotechnology Research Center (CINN-CSIC), El Entrego, Spain
    Cristian GÓMEZ-RODRÍGUEZ, Departamento de Mecánica, Facultad de Ingeniería, Universidad Veracruzana, Coatzacoalcos, Mexico
    Adolfo FERNÁNDEZ, Nanomaterials and Nanotechnology Research Center (CINN-CSIC), El Entrego, Spain

    person_pinJuan PIÑUELA-NOVAL, Nanomaterials and Nanotechnology Research Center (CINN-CSIC), El Entrego, Spain
    12:45 - 13:00 | Highly Transparent Polycrystalline MgO via Spark Plasma SinteringMichal SAKAJIO, Technion-Israel Institute of Technology, Haifa, Israel
    Vadim BEILIN, Technion-Israel Institute of Technology, Haifa, Israel
    Meirav MANN-LAHAV, Technion-Israel Institute of Technology, Haifa, Israel
    Shai ZAMIR, Rafael, Haifa, Israel
    Gennady SHTER, Technion-Israel Institute of Technology, Haifa, Israel
    Gideon GRADER, Technion-Israel Institute of Technology, Haifa, Israel

    person_pinGideon GRADER, Technion-Israel Institute of Technology, Haifa, Israel
    HL11:00 - 11:30 | Impact of thermal radiation on the high-temperature thermal behaviour of porous ceramics: from open-cell foams up to recent architectured 3D structuresBenoit ROUSSEAU, Nantes Université, CNRS, LTeN, Nantes, France
    F. ASLLANAJ,
    F. ENGUEHARD, Université de Poitiers, ISAE-ENSMA, CNRS, Institut P’, Futuroscope , Chasseneuil, France
    Y. FAVENNEC, Nantes Université, CNRS, LTeN, Nantes, France
    O. FARGES, Université de Lorraine, CNRS, LEMTA, Nancy, France
    R. FOURNIER, 5Université de Toulouse, CNRS, INPT, UPS LAPLACE, Toulouse, France
    M. EL HAFI, Université de Toulouse, IMT Mines Albi, RAPSODEE, Campus Jarlard, Albi, France
    G. PARENT, Université de Toulouse, IMT Mines Albi, RAPSODEE, Campus Jarlard, Albi, France
    J-H. RANDRIANALISOA, Université de Reims Champagne-Ardenne, ITheMM , Reims, France
    D. ROCHAIS, CEA/DAM, Le Ripault, BP 16, Monts, France
    V. SCHICK, Université de Pau, CNRS, LMAP, Anglet, France
    J. VICENTE, Aix Marseille Université, CNRS, IUSTI, Marseille, France
    G. VIGNOLES, Université de Bordeaux, CNRS, CEA, Safran Ceramics, LCTS, Pessac, France

    person_pinBenoit ROUSSEAU, Nantes Université, CNRS, LTeN, Nantes, France
    11:30 - 11:45 | Modeling of the curl distortion on ceramic parts caused by thermal and chemical stress during stereolithography processDylan VALLET, IRCER, Limoges, France
    Vincent PATELOUP, IRCER, Limoges, France
    Philippe MICHAUD, IRCER, Limoges, France
    Thierry CHARTIER, IRCER, Limoges, France

    person_pinDylan VALLET, IRCER, Limoges, France
    11:45 - 12:00 | AlSi12Fe-Al2O3 mechanical metamaterials from ceramics digital light processing additive manufacturingGeorgina MIRANDA, CICECO - Aveiro Institute of Materials, DEMaC - Department of Materials and Ceramic Engineering, University of Aveiro, 3810-193 Aveiro, Portugal, Aveiro, Portugal
    Carlos MATOS, CICECO - Aveiro Institute of Materials, DEMaC - Department of Materials and Ceramic Engineering, University of Aveiro, 3810-193 Aveiro, Portugal, Aveiro, Portugal
    Susana OLHERO, CICECO - Aveiro Institute of Materials, DEMaC - Department of Materials and Ceramic Engineering, University of Aveiro, 3810-193 Aveiro, Portugal, Aveiro, Portugal

    person_pinGeorgina MIRANDA, CICECO - Aveiro Institute of Materials, DEMaC - Department of Materials and Ceramic Engineering, University of Aveiro, 3810-193 Aveiro, Portugal, Aveiro, Portugal
    12:00 - 12:15 | Getting Closer to Obtaining Fully Dense Monolithic Ceria Stabilized Zirconia with Direct Ink WritingMia KOVAC, KU Leuven Department of Materials Engineering, Leuven, Belgium
    Erin KOOS, KU Leuven Department of Chemical Engineering, Leuven, Belgium
    Bart VAN MEERBEEK, KU Leuven Department of Oral Health Sciences, Leuven, Belgium
    Jef VLEUGELS, KU Leuven Department of Materials Engineering, Leuven, Belgium
    Annabel BRAEM, KU Leuven Department of Materials Engineering, Leuven, Belgium

    person_pinMia KOVAC, KU Leuven Department of Materials Engineering, Leuven, Belgium
    12:15 - 12:30 | Admaflex 3D printing technology for ceramics and metalsNadia EL FELSS, Admatec Europe, Alkmaar, Netherlands

    person_pinNadia EL FELSS, Admatec Europe, Alkmaar, Netherlands
    12:30 - 12:45 | Textured alumina/zirconia composites fabricated via Digital Light Processing (DLP)Bartolomeo COPPOLA, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
    Julien SCHMITT, Laboratoire de Synthèse et Fonctionnalisation des céramiques (LSFC) UMR 3080 CNRS/SAINT-GOBAIN CREE, SAINT-GOBAIN RESEARCH PROVENCE, Cavaillon, France
    Laura MONTANARO, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
    Paola PALMERO, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy

    person_pinBartolomeo COPPOLA, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
    12:45 - 13:00 | The M.A.T. a new way to shape SiC by 3DCeram SintoVincent AUCLAIR, 3DCeram Sinto, Limoges, France

    person_pinVincent AUCLAIR, 3DCeram Sinto, Limoges, France
    HL11:00 - 11:30 | Functionally Graded Ultra-high Temperature Ceramics: Thermo-elastic Numerical Analysis and Mechanical Properties Laura SILVESTRONI, CNR - ISSMC, Faenza, Italy
    Cesare MELANDRI, CNR - ISSMC, Faenza, Italy
    Diletta SCITI, CNR - ISSMC, Faenza, Italy
    Diego PAVAN, Dept. of Aerospace Science and Technology, Politecnico di Milano, Milan, Italy
    Antonio Mattia GRANDE, Dept. of Aerospace Science and Technology, Politecnico di Milano, Milan, Italy

    person_pinLaura SILVESTRONI, CNR - ISSMC, Faenza, Italy
    11:30 - 11:45 | Joining oxide-based ceramic matrix composites operating under direct flame exposureCarla MALINVERNI, Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, Torino, Italy
    Milena SALVO, Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, Torino, Italy
    Alessandro DE ZANET, Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, Torino, Italy
    Fabiana D'ISANTO, Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, Torino, Italy
    Federico SMEACETTO, Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, Torino, Italy
    Pierre BERTRAND, University Bourgogne Franche-Comté, Laboratory ICB, UMR - 6303 CNRS, site UTBM, Belfort, France
    Georg PUCHAS, Chair of Ceramic Materials Engineering, University of Bayreuth, Prof.-Rüdiger-Bormann-Str. 1, Bayreuth, Germany
    Stefan SCHAFFÖNER, Chair of Ceramic Materials Engineering, University of Bayreuth, Prof.-Rüdiger-Bormann-Str. 1, Bayreuth, Germany
    Valentina CASALEGNO, Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, Torino, Italy

    person_pinCarla MALINVERNI, Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, Torino, Italy
    11:45 - 12:00 | Joining of CVD β-SiC and Cf/SiC to themselves using in-situ formed SiC-ZrC interlayer Naser HOSSEINI, Institute of Inorganic Chemistry, Slovak Academy of Science, Bratislava, Slovakia
    Zdenek CHLUP, Institute of Physics of Materials, Czech Academy of Sciences, Brno, Czechia
    Alexandra KOVALCÍKOVÁ, Institute of Materials Research, Slovak Academy of Sciences, Košice, Slovakia
    Xiaobing ZHOU , Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo, China
    Filip ŠIŠKA, Institute of Physics of Materials, Czech Academy of Sciences, Brno, Czechia
    Ivo DLOUHÝ, Institute of Physics of Materials, Czech Academy of Sciences, Brno, Czechia
    Peter TATARKO, Institute of Inorganic Chemistry, Slovak Academy of Science, Bratislava, Slovakia

    person_pinNaser HOSSEINI, Institute of Inorganic Chemistry, Slovak Academy of Science, Bratislava, Slovakia
    12:00 - 12:15 | Mechanical Characterisation and Comparison of T-shape Intersections Made of C/SiC CompositesNicolas ABOUAB, Thermo-Structural Composite Laboratory (LCTS) - UMR 5801 (CNRS - CEA - Safran - Bordeaux University), Pessac, France
    Olivier CATY, Thermo-Structural Composite Laboratory (LCTS) - UMR 5801 (CNRS - CEA - Safran - Bordeaux University), Pessac, France
    André EBEL, Thermo-Structural Composite Laboratory (LCTS) - UMR 5801 (CNRS - CEA - Safran - Bordeaux University), Pessac, France
    François GUILLET, CEA - Military Application Division, Le Ripault, Monts, France
    Jérôme ROGER, Thermo-Structural Composite Laboratory (LCTS) - UMR 5801 (CNRS - CEA - Safran - Bordeaux University), Pessac, France

    person_pinNicolas ABOUAB, Thermo-Structural Composite Laboratory (LCTS) - UMR 5801 (CNRS - CEA - Safran - Bordeaux University), Pessac, France
    12:15 - 12:30 | Manufacture, Simulation and Testing of Torsion Bars made of Carbon-Fiber Reinforced Carbon-Silicon CarbidEmir Ege ARDAC, German Aerospace Center, Stuttgart, Germany
    Tobias LEHNERT, German Aerospace Center, Stuttgart, Germany
    Luis BAIER, German Aerospace Center, Stuttgart, Germany
    Lucas DAUTH, German Aerospace Center, Stuttgart, Germany

    person_pinEmir Ege ARDAC, German Aerospace Center, Stuttgart, Germany
    HL11:00 - 11:30 | The influence of MgO-C refractories with different types of magnesia and recyclates on non-metallic inclusions in steel meltsFlorian KERBER, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Kirsten MORITZ, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Jana HUBÁLKOVÁ, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Till M. J. STADTMÜLLER, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Thomas SCHEMMEL, Refratechnik Steel GmbH, Research & Development, Düsseldorf, Germany
    Helge JANSEN, Refratechnik Steel GmbH, Research & Development, Düsseldorf, Germany
    Christos G. ANEZIRIS, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany

    person_pinFlorian KERBER, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    11:30 - 11:45 | Advantages of unfired MgO-Cr2O3 brick for RH DegassersBárbara BORGES DE MELO, RHI MAGNESITA, Contagem, Brazil
    Carlos PAGLIOSA, RHI MAGNESITA, Contagem, Brazil
    Vanderlucio MADALENA , RHI MAGNESITA, Contagem, Brazil
    Victor PANDOLFELLI , Federal University of São Carlos (UFSCar), São Carlos, Brazil

    person_pinCarlos PAGLIOSA, RHI MAGNESITA, Contagem, Brazil
    11:45 - 12:00 | NANO GRAPHITE TECHNOLOGY FOR STEEL LADLE AND BOF: ULTRA LOW CARBON BRICKS FOR ENERGY SAVINGSCarlos PAGLIOSA, RHI MAGNESITA, Contagem, Brazil
    Bárbara BORGES, RHI MAGNESITA, Contagem, Brazil
    Marcelo BORGES, RHI MAGNESITA, Contagem, Brazil

    person_pinCarlos PAGLIOSA, RHI MAGNESITA, Contagem, Brazil
    12:00 - 12:15 | Post-mortem characterization of Al2O3-SiC-C refractory castables exposed on the main runner of blast furnacesSina DARBAN, Laboratoire Matériaux et Durabilité des Constructions, INSA/UPS Génie Civil, Université de Toulouse, CEDEX 04, 31077 Toulouse, France, Toulouse, France
    Cédric PATAPY, Laboratoire Matériaux et Durabilité des Constructions, INSA/UPS Génie Civil, Université de Toulouse, CEDEX 04, 31077 Toulouse, France, Toulouse, France
    Laurie LACARRIÈRE, Laboratoire Matériaux et Durabilité des Constructions, INSA/UPS Génie Civil, Université de Toulouse, CEDEX 04, 31077 Toulouse, France, Toulouse, France
    Martin CYR, Laboratoire Matériaux et Durabilité des Constructions, INSA/UPS Génie Civil, Université de Toulouse, CEDEX 04, 31077 Toulouse, France, Toulouse, France
    Geoffroy CHEVALLIER, CIRIMAT, Université de Toulouse, CNRS, Université Toulouse 3 Paul-Sabatier, 118 route de Narbonne, F-31062, Toulouse cedex 9, France, Toulouse, France
    Le Blond Du Plouy STEPHANE, Centre de Microcaractérisation Raimond Castaing, UMS 3623, Université de Toulouse, Espace Clément Ader, 3 rue Caroline Aigle, 31400, Toulouse, France, Toulouse, France
    Arnaud PROIETTI, Centre de Microcaractérisation Raimond Castaing, UMS 3623, Université de Toulouse, Espace Clément Ader, 3 rue Caroline Aigle, 31400, Toulouse, France, Toulouse, France
    Yannick MONVILLE, TRB - 31 rue Wilson 69150 Decines Charpieu, France, Nesles , France
    Pascal PRIGENT , TRB - 31 rue Wilson 69150 Decines Charpieu, France, Nesles , France

    person_pinSina DARBAN, Laboratoire Matériaux et Durabilité des Constructions, INSA/UPS Génie Civil, Université de Toulouse, CEDEX 04, 31077 Toulouse, France, Toulouse, France
    12:15 - 12:30 | Understanding of wear mechanism and development of innovative refractories for hazardous waste incineration using rotary kilnsArnaud DUCOULOMBIER, BONY SAS, Saint-Etinne, France
    Cyrille VARONA, BONY SAS, Saint-Etinne, France
    Xavier CHAUCHERIE, SARPI-VEOLIA, Limay, France
    Jacques POIRIER, CEMHTI - UPR3079 CNRS, Orléans, France
    François VALDIVIESO, LGF - Centre SMS UMR5307 - MINES Saint-Etienne, Saint-Etienne, France

    person_pinCyrille VARONA, BONY SAS, Saint-Etinne, France
    12:30 - 12:45 | Degradation of SiC-refractories in municipal solid waste incineration plantsClaire MENET, Veolia Recherche & Innovation (VERI), LIMAY, France
    Michel CHEVALLIER, Veolia Recherche & Innovation (VERI), LIMAY, France
    Alexandre LIMA, Veolia Recherche & Innovation (VERI), LIMAY, France
    Jean-Michel BROSSARD, Veolia Recherche & Innovation (VERI), LIMAY, France

    person_pinClaire MENET, Veolia Recherche & Innovation (VERI), LIMAY, France
    12:45 - 13:00 | Stability assessment of refractories at high temperature corrosive atmosphere as energy storage materials in solar thermal systemsN. Sena YÜZBASI, Laboratory for High Performance Ceramics, Empa, Swiss Federal Laboratories for Materials Science and Technology, Dübendorf, Switzerland
    Lukas GEISSBÜHLER, Synhelion SA, Lugano, Switzerland
    Thomas GRAULE, Laboratory for High Performance Ceramics, Empa, Swiss Federal Laboratories for Materials Science and Technology, Dübendorf, Switzerland
    Gurdial BLUGAN, Laboratory for High Performance Ceramics, Empa, Swiss Federal Laboratories for Materials Science and Technology, Dübendorf, Switzerland

    person_pinN. Sena YÜZBASI, Laboratory for High Performance Ceramics, Empa, Swiss Federal Laboratories for Materials Science and Technology, Dübendorf, Switzerland
    HL11:00 - 11:30 | Magneto Optical Glass SensorsMarcelo NALIN, Institute of Chemistry, São Paulo State University - UNESP, Araraquara, Brazil
    Douglas F. FRANCO, Institute of Chemistry, São Paulo State University - UNESP, Araraquara, Brazil
    Claudio FLORÍDIA, CPQD – Research and Development Center in Telecommunications, Campinas, Brazil
    João B. ROSOLEM, CPQD – Research and Development Center in Telecommunications, Campinas, Brazil

    person_pinMarcelo NALIN, Institute of Chemistry, São Paulo State University - UNESP, Araraquara, Brazil
    11:30 - 11:45 | SPS sintered β-Si3N4-SiO2 glass-ceramics for biomedical applicationsHuasi ZHOU,
    Cecilia PERSSON, Division of Biomedical Engineering, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden
    Håkan ENGQVIST, Division of Applied Materials Science, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden
    Wei XIA, Division of Applied Materials Science, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden

    person_pinHuasi ZHOU, Division of Applied Materials Science, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden; Division of Biomedical Engineering, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden
    11:45 - 12:00 | Charge carrier density in ion-conducting alkali silicate glasses measurements via electrode polarizationVinicius Martins ZALLOCCO, Vitreous Materials Laboratory, São Carlos, Brazil
    João Vitor CAMPOS, Vitreous Materials Laboratory, São Carlos, Brazil
    Ana Candida Martins RODRIGUES, Vitreous Materials Laboratory, São Carlos, Brazil

    person_pinVinicius Martins ZALLOCCO, Vitreous Materials Laboratory, São Carlos, Brazil
    12:00 - 12:15 | Er3+ doped Ag2O containing glass fibersIuliia SHESTOPALOVA, Photonics Laboratory, Tampere University, Tampere, Finland
    Juho KORRI, Photonics Laboratory, Tampere University, Tampere, Finland
    Arnaud LEMIERE, Photonics Laboratory, Tampere University, Tampere, Finland
    Mikko NÄRHI, Photonics Laboratory, Tampere University, Tampere, Finland
    Regina GUMENYUK,
    Catherine BOUSSARD-PLÉDEL, Univ Rennes, Rennes, France
    Johann TROLES, Univ Rennes, Rennes, France
    Laeticia PETIT, Photonics Laboratory, Tampere University, Tampere, Finland

    person_pinIuliia SHESTOPALOVA, Photonics Laboratory, Tampere University, Tampere, Finland
    12:15 - 12:30 | Low phonon glass-ceramic materials with Ba4Er3F17 and Ba3Te4O11 nanocrystalline phasesMagdalena LESNIAK, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, A. Mickiewicza 30, 30-059 Krakow, Poland, Krakow, Poland
    Bartlomiej STARZYK, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, A. Mickiewicza 30, 30-059 Krakow, Poland, Krakow, Poland
    Gloria Lesly JIMENEZ, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, A. Mickiewicza 30, 30-059 Krakow, Poland, Krakow, Poland
    Marcin KOCHANOWICZ, Faculty of Electrical Engineering, Bialystok University of Technology, Wiejska 45D, Bialystok, Poland, Bialystok, Poland
    Marta KUWIK, Institute of Chemistry, University of Silesia, Szkolna 9, 40-007 Katowice, Poland, Katowice, Poland
    Joanna PISARSKA, Institute of Chemistry, University of Silesia, Szkolna 9, 40-007 Katowice, Poland, Katowice, Poland
    Wojciech Andrzej PISARSKI, Institute of Chemistry, University of Silesia, Szkolna 9, 40-007 Katowice, Poland, Katowice, Poland
    Dominik DOROSZ,

    person_pinMagdalena LESNIAK, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, A. Mickiewicza 30, 30-059 Krakow, Poland, Krakow, Poland
    HL11:00 - 11:30 | Low-temperature solution processing of BiFeO3 ferroelectric thin films by using sono- and photo-chemistryMaria ECHANIZ-CINTORA, Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), Madrid, Spain
    Y. Andrea RIVAS, Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), Madrid, Spain
    Ricardo JIMENEZ, Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), Madrid, Spain
    Rafael SIRERA, Universidad de Navarra, Pamplona, Spain
    Iñigo BRETOS, Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), Madrid, Spain
    M. Lourdes CALZADA, Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), Madrid, Spain

    person_pinM. Lourdes CALZADA, Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), Madrid, Spain
    11:30 - 11:45 | Magnetoelectric materials attained by the solution deposition of (1-x)BiFeO3-xPbTiO3 ferroelectric films on Ni-substratesAdriana BARRETO, Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), Madrid, Spain
    Iñigo BRETOS, Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), Madrid, Spain
    Ricardo JIMÉNEZ, Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), Madrid, Spain
    Harvey AMORÍN, Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), Madrid, Spain
    Miguel ALGUERO, Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), Madrid, Spain
    M. Lourdes CALZADA, Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), Madrid, Spain

    person_pinMiguel ALGUERO, Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), Madrid, Spain
    11:45 - 12:00 | Structure and magnetoelectric properties of epitaxial Sr-doped LaMnO3 thin films prepared by polymer assisted depositionDanica PIPER, Faculty of Technology Novi Sad, University of Novi Sad, Novi Sad, Serbia
    Jelena VUKMIROVI?, Faculty of Technology Novi Sad, University of Novi Sad, Novi Sad, Serbia
    Iva TOKOVI?, Faculty of Technology Novi Sad, University of Novi Sad, Novi Sad, Serbia
    Pavla ŠENJUG, Faculty of Science, University of Zagreb, Zagreb, Croatia
    Damir PAJIC, Faculty of Science, University of Zagreb, Zagreb, Croatia
    Marija MILANOVIC, Faculty of Technology Novi Sad, University of Novi Sad, Novi Sad, Serbia
    Stevan ARMAKOVIC, Faculty of Sciences, Univeristy of Novi Sad, Novi Sad, Serbia
    ŽEljka CVEJIC, Faculty of Sciences, Univeristy of Novi Sad, Novi Sad, Serbia
    Vladimir SRDIC, Faculty of Technology Novi Sad, University of Novi Sad, Novi Sad, Serbia

    person_pinVladimir SRDIC, Faculty of Technology Novi Sad, University of Novi Sad, Novi Sad, Serbia
    12:00 - 12:15 | Microstructure and Properties of 0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO3 Thin Films by Ethylene-Glycol Based Solution RouteSabi William KONSAGO,
    Katarina ŽIBERNA,
    Brigita KMET,
    Andreja BENCAN,
    Hana URŠIC,
    Geoff BRENNECKA, Department of Mechanical Engineering, Colorado School of Mines, Golden, Colorado 80401, United States
    Barbara MALIC,

    person_pinSabi William KONSAGO, Electronic Ceramics Department, Jožef Stefan InstituteJožef Stefan Institute, 1000 Ljubljana, Slovenia; Jožef Stefan International Postgraduate School, 1000 Ljubljana, Slovenia
    12:15 - 12:30 | Processing and Performance of Ni-Mn-Co-Oxide NTCR Thin FilmsKlaus REICHMANN, Graz University of Technology, Graz, Austria
    Sebastian REDOLFI, TDK Electronics GmbH & Co OG, Deutschlandsberg, Austria

    person_pinKlaus REICHMANN, Graz University of Technology, Graz, Austria
    11:00 - 11:15 | Investigating High-Performance Oxygen Electrodes for Micro-Solid Oxide Cells: A Combined Experimental and Numerical ApproachSilvère PANISSET,
    David JAUFFRES, Univ. Grenoble Alpes, CNRS, Grenoble INP, SIMaP, Saint-Martin-d'Heres, France
    Adeel RIAZ, Univ. Grenoble Alpes, CNRS, Grenoble INP, LMGP, Grenoble, France
    Alexander STANGL, Univ. Grenoble Alpes, CNRS, Grenoble INP, LMGP, Grenoble, France
    Monica BURRIEL, Univ. Grenoble Alpes, CNRS, Grenoble INP, LMGP, Grenoble, France

    person_pinSilvère PANISSET, Univ. Grenoble Alpes, CNRS, Grenoble INP, LMGP, Grenoble, France; Univ. Grenoble Alpes, CNRS, Grenoble INP, SIMaP, Saint-Martin-d'Heres, France
    11:15 - 11:30 | Local atomic structure and ORR kinetics of Fe-based perovskite oxides for IT-SOFCsTaeheun LIM, Pusan National University, Busan, Korea (Republic of)
    Kanghee JO, Pusan National University, Busan, Korea (Republic of)
    Seonhong LEE, Korea Institute of Ceramic Engineering and Technology, Jinju, Korea (Republic of)
    Kim YONGNAM, Korea Testing Laboratory, Seoul, Korea (Republic of)
    Lee HEESOO, Pusan National University, Busan, Korea (Republic of)
    Park BEOM-KYEONG, Pusan National University, Busan, Korea (Republic of)

    person_pinTaeheun LIM, Pusan National University, Busan, Korea (Republic of)
    11:30 - 11:45 | Microstructural and Electrochemical Characterization of Freeze Tape Cast Fuel Electrodes For Solid Oxide Cells (SOCs)Davide CADEMARTORI, Department of Civil, Chemical and Environmental Engineering, University of Genoa (UNIGE-DICCA), Genoa, Italy
    Maxime HUBERT, Univ. Grenoble Alpes, CEA, LITEN, DTCH , Grenoble, France
    Jérôme LAURENCIN, Univ. Grenoble Alpes, CEA, LITEN, DTCH , Grenoble, France
    Maria Paola CARPANESE, Department of Civil, Chemical and Environmental Engineering, University of Genoa (UNIGE-DICCA), Genoa, Italy

    person_pinDavide CADEMARTORI, Department of Civil, Chemical and Environmental Engineering, University of Genoa (UNIGE-DICCA), Genoa, Italy
    11:45 - 12:00 | Resiual stresses in anode supported BaZr(1-x)YxO(3-δ) electrolytes for solid oxide fuel cellsSol FERNÁNDEZ MUÑOZ, Departamento de Física de la Materia Condensada & Instituto de Ciencia de Materiales de Sevilla, Universidad de Sevilla-CSIC, Sevilla, Spain
    Joaquín RAMÍREZ RICO, Departamento de Física de la Materia Condensada & Instituto de Ciencia de Materiales de Sevilla, Universidad de Sevilla-CSIC, Sevilla, Spain
    Ricardo CHACARTEGUI RAMÍREZ, Departamento de Ingeniería Energética, Universidad de Sevilla, Sevilla, Spain

    person_pinSol FERNÁNDEZ MUÑOZ, Departamento de Física de la Materia Condensada & Instituto de Ciencia de Materiales de Sevilla, Universidad de Sevilla-CSIC, Sevilla, Spain
    12:00 - 12:15 | Preparation and characterization of  ytterbia stabilised zirconia for oxide ion conductors.Teresa REY WÓJCIK, Imerys Villach GbmH, Villach, Austria
    Joanna SZYMANSKA, Imerys Villach GbmH, Villach, Austria
    Paul PETSCHNIG, Imerys Villach GbmH, Villach, Austria
    Adrian VILLALBA WEINBERG, Imerys Villach GbmH, Villach, Austria
    Veronika MÜLLER, Imerys Villach GbmH, Villach, Austria
    Bruno KORNER, Imerys Villach GbmH, Villach, Austria
    Daniela JOSCHAK-ARRICH , Imerys Villach GbmH, Villach, Austria
    Sarah GRIESSER, Imerys Villach GbmH, Villach, Austria
    Michele PAVONE, Imerys Villach GbmH, Villach, Austria
    Andreas BÖRGER, Imerys Villach GbmH, Villach, Austria
    Angelika PRIESE, Imerys Murg GmbH, Laufenburg, Germany

    person_pinTeresa REY WÓJCIK, Imerys Villach GbmH, Villach, Austria
    12:15 - 12:30 | Synthesis of carbon-enriched N-doped SiOC-based electrode materials for energy storage devicesBerta PÉREZ-ROMÁN, Ceramic and glass Institute (ICV-CSIC), Madrid, Spain
    Alejandro MERCHÁN DEL REAL, Pharmacy faculty, Department of chemistry (Complutense University - UCM), Madrid, Spain
    Aitana TAMAYO , Ceramic and glass Institute (ICV-CSIC), Madrid, Spain
    Juan RUBIO , Ceramic and glass Institute (ICV-CSIC), Madrid, Spain
    Fernando RUBIO-MARCOS, Ceramic and glass Institute (ICV-CSIC), Madrid, Spain

    person_pinBerta PÉREZ-ROMÁN, Ceramic and glass Institute (ICV-CSIC), Madrid, Spain
    11:00 - 11:15 | Self-organisation phenomenology behind effective photocatalytic/photovoltaic thin filmsVilko MANDIC, Faculty of Chemical Engineering and Technology, Zagreb, Croatia
    Ivana PANŽIC, Faculty of Chemical Engineering and Technology, Zagreb, Croatia
    Ivan BRNARDIC, Faculty of Metallurgy, Sisak, Croatia
    Igor JAJCINOVIC, Faculty of Metallurgy, Sisak, Croatia
    Maja MICETIC, Ruđer Bošković Institute, Zagreb, Croatia

    person_pinVilko MANDIC, Faculty of Chemical Engineering and Technology, Zagreb, Croatia
    11:15 - 11:30 | Lead free photoactive BiFeO3-BaTiO3 solid solutions as solar water splitting photoelectrodesSina SAREMI YARAHMADI, Loughborough University, Loughborough, United Kingdom
    Thomas CLARKSON, Loughborough University, Loughborough, United Kingdom
    Hongtao ZHANG, Loughborough University, Loughborough, United Kingdom
    Bala VAIDHYANATHAN, Loughborough University, Loughborough, United Kingdom

    person_pinSina SAREMI YARAHMADI, Loughborough University, Loughborough, United Kingdom
    11:30 - 11:45 | Binder jetting of photocatalytic membranes from spray-dried granulated nanopowdersPablo ORTEGA-COLUMBRANS,
    Marco MARIANI, Department of Mechanical Engineering, Politecnico di Milano, Milano, Italy
    Ja ESCRIBANO, COLFEED4Print S.L. (Technological spin-off of the Colloidal Processing group of the Spanish National Research Council (CSIC)), Madrid, Spain
    Aj SANCHEZ-HERENCIA, Instituto de Cerámica y Vidrio (ICV-CSIC), Madrid, Spain
    Begoña FERRARI, Instituto de Cerámica y Vidrio (ICV-CSIC), Madrid, Spain
    Carmen GALASSI, Department of Mechanical Engineering, Politecnico di Milano, Milano, Italy
    Nora Francesca Maria LECIS, Department of Mechanical Engineering, Politecnico di Milano, Milano, Italy

    person_pinPablo ORTEGA-COLUMBRANS, Instituto de Cerámica y Vidrio (ICV-CSIC), Madrid, Spain; COLFEED4Print S.L. (Technological spin-off of the Colloidal Processing group of the Spanish National Research Council (CSIC)), Madrid, Spain
    11:45 - 12:00 | CuxS and CuxS-ZnS thin films for photoelectrochemical water splittingLouis OPPONG-ANTWI, School of Materials Science and Engineering, UNSW Sydney, Sydney, Australia
    Nagarajan VALANOOR, School of Materials Science and Engineering, UNSW Sydney, Sydney, Australia
    Judy HART, School of Materials Science and Engineering, UNSW Sydney, Sydney, Australia

    person_pinJudy HART, School of Materials Science and Engineering, UNSW Sydney, Sydney, Australia
    12:00 - 12:15 | Original and sustainable flux method approach to stabilize Co-doped Ga/Nb double perovskite from refractory reactantManessha VARGHESE, Institut de Chimie de la Matière Condensée de Bordeaux / Université de Bordeaux, Bordeaux, France
    Olivier TOULEMONDE, Institut de Chimie de la Matière Condensée de Bordeaux / Université de Bordeaux, Bordeaux, France

    person_pinOlivier TOULEMONDE, Institut de Chimie de la Matière Condensée de Bordeaux / Université de Bordeaux, Bordeaux, France
    HL11:00 - 11:30 | Lead antimonate in the pigments of Portuguese decorated tiles: experimental replications and scienctific characterisationMario BANDIERA , VICARTE - Glass and Ceramics for the Arts, FCT-NOVA, Caparica, Portugal
    Umberto VERONESI, VICARTE - Glass and Ceramics for the Arts, FCT-NOVA, Caparica, Portugal
    Marta MANSO,
    Alexandre PAIS, Museu Nacional do Azulejo, Lisbon , Portugal
    Lurdes ESTEVES, Museu Nacional do Azulejo, Lisbon , Portugal
    Andreia RUIVO,
    Márcia VILARIGUES,
    Susana COENTRO,

    person_pinUmberto VERONESI, VICARTE - Glass and Ceramics for the Arts, FCT-NOVA, Caparica, Portugal
    11:30 - 11:45 | Reproducing lead antimonate yellow glazes to understand ancient Middle Eastern practicesEmmie BEAUVOIT,
    Odile MAJÉRUS, Chimie ParisTech, CNRS, Institut de Recherche de Chimie Paris (IRCP), PSL Research University, Paris, France
    Daniel CAURANT, Chimie ParisTech, CNRS, Institut de Recherche de Chimie Paris (IRCP), PSL Research University, Paris, France
    Gilles WALLEZ,
    Julien CUNY, Musée du Louvre, Département des Antiquités Orientales, Paris, France
    Ariane THOMAS, Musée du Louvre, Département des Antiquités Orientales, Paris, France
    Anna PICCOLO, European Synchrotron Radiation Facility (ESRF), Grenoble, France
    Marine COTTE,
    Anne BOUQUILLON,

    person_pinEmmie BEAUVOIT, Centre de Recherche et de Restauration des Musées de France (C2RMF), Paris, France; Chimie ParisTech, CNRS, Institut de Recherche de Chimie Paris (IRCP), PSL Research University, Paris, France
    11:45 - 12:00 | Influence of glass coloring on the crystallization process of calcium antimonates in Roman glass tesseraeLéa GARDIE, Institut de Minéralogie, de Physique des Matériaux et de Cosmochimie (IMPMC), Sorbonne Université, CNRS, MNHN, IRD, Paris, France
    Laurent CORMIER, Institut de Minéralogie, de Physique des Matériaux et de Cosmochimie (IMPMC), Sorbonne Université, CNRS, MNHN, IRD, Paris, France
    Nadine SCHIBILLE, IRAMAT-CEB, Université d’Orléans, CNRS, Orléans, France

    person_pinLéa GARDIE, Institut de Minéralogie, de Physique des Matériaux et de Cosmochimie (IMPMC), Sorbonne Université, CNRS, MNHN, IRD, Paris, France
    12:00 - 12:15 | Composition and origin of early Roman polychrome mosaic glass from the collections of the Victoria & Albert MuseumLiam RICHARDS, UCL Institute of Archaeology, London, United Kingdom
    Ian FREESTONE, UCL Institute of Archaeology, London, United Kingdom
    Lucia BURGIO, V&A South Kensington, London, United Kingdom

    person_pinLiam RICHARDS, UCL Institute of Archaeology, London, United Kingdom
    12:15 - 12:30 | Characterization and interaction studies in two-layer glazed porcelain systems developed to replace lead glazes at SèvresAziliz LE BESCOND DE COATPONT,
    Gilles WALLEZ, Institut de Recherche de Chimie Paris, Paris, France
    Odile MAJERUS, Institut de Recherche de Chimie Paris, Paris, France
    Daniel CAURANT, Institut de Recherche de Chimie Paris, Paris, France
    Lucie LE BRIS, Van Cleef & Arpels, Paris, France
    Atika CHEMMI, Cité de la céramique - Sèvres et Limoges, Sèvres, France
    Lise BOUTENÈGRE, Institut de Recherche de Chimie Paris, Paris, France

    person_pinAziliz LE BESCOND DE COATPONT, Institut de Recherche de Chimie Paris, Paris, France; Van Cleef & Arpels, Paris, France
    12:30 - 12:45 | The production technology of Portuguese 16th-17th-century faience and its comparison with coeval azulejosSusana COENTRO,
    Mario BANDIERA, VICARTE - Research Unit "Glass and Ceramics for the Arts", NOVA School of Science and Technology, Caparica, Portugal
    Umberto VERONESI, VICARTE - Research Unit "Glass and Ceramics for the Arts", NOVA School of Science and Technology, Caparica, Portugal
    Victor LANCRENON,
    Alexandre N. PAIS, Museu Nacional do Azulejo, Lisbon, Portugal
    João Manuel MIMOSO, Laboratório Nacional de Engenharia Civil, Lisbon, Portugal

    person_pinSusana COENTRO, VICARTE - Research Unit "Glass and Ceramics for the Arts", NOVA School of Science and Technology, Caparica, Portugal; Department of Conservation and Restoration, NOVA School of Science and Technology, Caparica, Portugal
    12:45 - 13:00 | DECODING CERAMICS - the digital transmission of tacit knowledge in intangible cultural heritage.Anthony QUINN, Central Saint Martins - University of the Arts London, LONDON, United Kingdom
    Vilarigues MÁRCIA, VICARTE – Vidro e Cerâmica para as Artes and Deparymetn of Conservation and Restoration, NOVA School of Science and Technology, Portugal, Lisboa, Portugal

    person_pinAnthony QUINN, Central Saint Martins - University of the Arts London, LONDON, United Kingdom
    11:00 - 11:30 | Solid-state and Liquid-phase sintering: fundamental differences in densification and grain growthSuk-Joong L. KANG, Korea Advanced Institute of Science and Technology, Daejeon, Korea (Republic of)

    person_pinSuk-Joong L. KANG, Korea Advanced Institute of Science and Technology, Daejeon, Korea (Republic of)
    11:30 - 12:00 | Thermal conductivity measurements as a probe to study sintering mechanisms in oxide ceramics: hydroxyapatite, zirconia and aluminaDavid S. SMITH, University of Limoges, Institute of Research for Ceramics (IRCER), UMR CNRS 7315, 87068 Limoges, France
    Benoit NAIT-ALI, University of Limoges, Institute of Research for Ceramics (IRCER), UMR CNRS 7315, 87068 Limoges, France
    Clément GUILLET, University of Limoges, Institute of Research for Ceramics (IRCER), UMR CNRS 7315, 87068 Limoges, France
    Zonghao GUO, University of Oxford, Department of Materials, Oxford OX1 3PH, United Kingdom
    Richard I. TODD, University of Oxford, Department of Materials, Oxford OX1 3PH, United Kingdom
    Pierre LEFEUVRE, Université Polytechnique Hauts-de-France, INSA Hauts-de-France, CERAMATHS Laboratoire de Matériaux Céramiques et de Mathématiques, 59313 Valenciennes, France
    Maxence RENAUX, Université Polytechnique Hauts-de-France, INSA Hauts-de-France, CERAMATHS Laboratoire de Matériaux Céramiques et de Mathématiques, 59313 Valenciennes, France
    Anne LERICHE, Université Polytechnique Hauts-de-France, INSA Hauts-de-France, CERAMATHS Laboratoire de Matériaux Céramiques et de Mathématiques, 59313 Valenciennes, France

    person_pinDavid S. SMITH, University of Limoges, Institute of Research for Ceramics (IRCER), UMR CNRS 7315, 87068 Limoges, France
    12:00 - 12:30 | Selection of surfactants in 3-D-printing technologies: Fundamental aspects and application examplesThomas GRAULE, Empa, Laboratory for High Performance Ceramics, Duebendorf, Switzerland

    person_pinThomas GRAULE, Empa, Laboratory for High Performance Ceramics, Duebendorf, Switzerland
    12:30 - 13:00 | Improving piezoelectric ceramics by grain orientation control  Astri Bjørnetun HAUGEN, Technical University of Denmark, Kgs. Lyngby, Denmark

    person_pinAstri Bjørnetun HAUGEN, Technical University of Denmark, Kgs. Lyngby, Denmark
    HL11:00 - 11:30 | The development and application status of dental zirconia in past three decades in ChinaJianmin HAN, Peking University School and Hospital of Stomatology, Beijing , China

    person_pinJianmin HAN, Peking University School and Hospital of Stomatology, Beijing , China
    11:30 - 11:45 | Digital synergy: a 21st-century concept in digital dentistry A Dental Workflow in the Digital EraSebastjan PERKO, Medical Dentistry, clinic for comprehensive dentistry, Slovenska cesta 54, 1000 Ljubljana, Ljubljana, Slovenia
    TjašA ŽNIDARŠI?, DSLab, Digital Synergy Lab, Slovenska cesta 54, 1000 Ljubljana, Ljubljana, Slovenia
    Bojan VIDNIŠ, Medical Dentistry, clinic for comprehensive dentistry, Slovenska cesta 54, 1000 Ljubljana, Ljubljana, Slovenia
    Marko BERKOPEC, Medical Dentistry, clinic for comprehensive dentistry, Slovenska cesta 54, 1000 Ljubljana, Ljubljana, Slovenia
    Jelena BOŽIC, Medical Dentistry, clinic for comprehensive dentistry, Slovenska cesta 54, 1000 Ljubljana, Ljubljana, Slovenia
    Simon BELE, Medical Dentistry, clinic for comprehensive dentistry, Slovenska cesta 54, 1000 Ljubljana, Ljubljana, Slovenia
    Andraž KOCJAN, Department for Nanostructured materials, Jožef Stefan Institute, Jamova 39, 1000 Ljubljana, Ljubljana, Slovenia
    Shen ZHIJIAN, Department of Materials and Environmental Chemistry, Stockholm University, Stockholm, Sweden

    person_pinSebastjan PERKO, Medical Dentistry, clinic for comprehensive dentistry, Slovenska cesta 54, 1000 Ljubljana, Ljubljana, Slovenia
    11:45 - 12:00 | Pressure slip casting of multilayer blanks for dental restaurationsDaniel SCHUMACHER, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Hermsdorf, Germany
    Sabine BEGAND, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Hermsdorf, Germany

    person_pinDaniel SCHUMACHER, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Hermsdorf, Germany
    HL14:30 - 15:00 | Forming Aluminosilicate Ceramic Precursors by the Geopolymerization MethodDevon M. SAMUEL, University of Illinois at Urbana-Champaign, Department of Materials Science and Engineering,, Urbana, IL, USA
    Waltraud M. KRIVEN, University of Illinois at Urbana-Champaign, Department of Materials Science and Engineering,, Urbana, IL, USA
    Allison S. BRANDVOLD, University of Illinois at Urbana-Champaign, Department of Materials Science and Engineering,, Urbana, IL, USA

    person_pinWaltraud M. KRIVEN, University of Illinois at Urbana-Champaign, Department of Materials Science and Engineering,, Urbana, IL, USA
    15:00 - 15:15 | Geopolymer adsorbents: design and synthesisElettra PAPA, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics CNR-ISSMC (former ISTEC), Faenza, Italy
    Elena LANDI, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics CNR-ISSMC (former ISTEC), Faenza, Italy
    Annalisa NATALI MURRI, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics CNR-ISSMC (former ISTEC), Faenza, Italy
    Francesco MICCIO, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics CNR-ISSMC (former ISTEC), Faenza, Italy
    Valentina MEDRI, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics CNR-ISSMC (former ISTEC), Faenza, Italy

    person_pinElettra PAPA, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics CNR-ISSMC (former ISTEC), Faenza, Italy
    15:15 - 15:30 | Geopolymer adsorbents: adsorption characterizationValentina MEDRI, CNR-ISSMC (former CNR-ISTEC), Faenza, Italy
    Elena LANDI, CNR-ISSMC (former CNR-ISTEC), Faenza, Italy
    Elettra PAPA, CNR-ISSMC (former CNR-ISTEC), Faenza, Italy
    Matteo MINELLI, DICAM, University of Bologna, Bologna, Italy
    Dario FRASCARI, DICAM, University of Bologna, Bologna, Italy
    Davide PINELLI, DICAM, University of Bologna, Bologna, Italy

    person_pinValentina MEDRI, CNR-ISSMC (former CNR-ISTEC), Faenza, Italy
    15:30 - 15:45 | Pore structure investigation of freeze-tape cast phyllosilicate ceramics Poeiti LETANG, IRCER UMR CNRS 7315, University of Limoges, Limoges, France
    Gisèle Laure LECOMTE-NANA, IRCER UMR CNRS 7315, University of Limoges, Limoges, France
    Sandra ABDELOUHAB, Belgian Ceramic Research Centre, , Mons, Belgium
    Benoit NAIT-ALI, IRCER UMR CNRS 7315, University of Limoges, Limoges, France
    Maurice GONON, Materials Institute, University of Mons, Mons, Belgium
    Laetitia JOUEGO NDOHO,
    Clemence BREGEON, IRCER UMR CNRS 7315, University of Limoges, Limoges, France
    Claire PEYRATOUT, IRCER UMR CNRS 7315, University of Limoges, Limoges, France

    person_pinGisèle Laure LECOMTE-NANA, IRCER UMR CNRS 7315, University of Limoges, Limoges, France
    15:45 - 16:00 | Sons of the Moon. Forming bells of lunar regolith by slip castingRodrigo MORENO, Instituto de Cerámica y Vidrio, Madrid, Spain
    Carmen ALCÁZAR, Instituto de Cerámica y Vidrio, Madrid, Spain
    Carlos TRAGINER, Traginer Music Research Lab, Zaragoza, Spain
    Rut BENAVENTE, ITM-Universitat Politècnica de València, Valencia, Spain
    MARTÍNEZ-FRÍAS, Instituto de Geociencias, IGEO (CSIC-UCM), Madrid, Spain

    person_pinRodrigo MORENO, Instituto de Cerámica y Vidrio, Madrid, Spain
    16:00 - 16:15 | Shaping of hierarchical mesoporous silica monoliths by hard templating approach using sacrificial polymer beadsRidvan YILDIZ,
    Yannick LORGOUILLOUX, Univ. Polytechnique Hauts-de-France, INSA Hauts-de-France, CERAMATHS, F-59313 Valenciennes, France, Valenciennes, France
    Jérémy DHAINAUT, Univ. Lille, ENSCL, Centralle Lille, Univ. Artois, UMR 8181 - UCCS, F-59000 Lille, France, Lille, France
    Jean-Philippe DACQUIN, Univ. Lille, ENSCL, Centralle Lille, Univ. Artois, UMR 8181 - UCCS, F-59000 Lille, France, Lille, France
    Sébastien ROYER, Univ. Lille, ENSCL, Centralle Lille, Univ. Artois, UMR 8181 - UCCS, F-59000 Lille, France, Lille, France
    Christian COURTOIS, Univ. Polytechnique Hauts-de-France, INSA Hauts-de-France, CERAMATHS, F-59313 Valenciennes, France, Valenciennes, France

    person_pinYannick LORGOUILLOUX, Univ. Polytechnique Hauts-de-France, INSA Hauts-de-France, CERAMATHS, F-59313 Valenciennes, France, Valenciennes, France
    16:15 - 16:30 | Impact of Heating Rate and Atmosphere on Methyl-Silsesquioxane-Based Structure Fabrication  Fateme SARRAF,
    Sergey V. CHURAKOV,
    Frank CLEMENS, Empa- Swiss Federal Laboratories for Materials Science and Technology, Dübendorf, Switzerland

    person_pinFrank CLEMENS, Empa- Swiss Federal Laboratories for Materials Science and Technology, Dübendorf, Switzerland
    HL14:30 - 15:00 | Ultrafast high-temperature sintering of ceramics: from YSZ to refractory ceramicsMattia BIESUZ, University of Trento, Trento, Italy
    Emanuele DE BONA, University of Trento, Trento, Italy
    Charles MANIÈRE, CNRS Equipe Matériaux et procédés, Caen, France
    Vincenzo M. SGLAVO, University of Trento, Trento, Italy
    Claude ESTOURNE, CIRIMAT, CNRS-INP-UPS, Université Toulouse 3, Toulouse
    Thomas Herrison DE BEAUVOIR, CIRIMAT, CNRS-INP-UPS, Université Toulouse 3, Toulouse
    Levent KARACASULU, Department of Materials Science and Engineering, Izmir Institute of Technology, Izmir, Turkey
    Cekdar Vakif AHMETOGLU, Department of Materials Science and Engineering, Izmir Institute of Technology, Izmir, Turkey

    person_pinMattia BIESUZ, University of Trento, Trento, Italy
    15:00 - 15:15 | Blacklight and ultrafast high-temperature sintering of BaTiO3 and Al2O3Michael SCHERER, Technical University of Darmstadt, Department of Materials and Earth Sciences, Nonmetallic-Inorganic Materials, Darmstadt, Germany
    Zonghao GUO, University of Oxford, Department of Materials, Oxford, United Kingdom
    Lovro FULANOVIC, Technical University of Darmstadt, Department of Materials and Earth Sciences, Nonmetallic-Inorganic Materials, Darmstadt, Germany
    Richard TODD, University of Oxford, Department of Materials, Oxford, United Kingdom
    Jürgen RÖDEL, Technical University of Darmstadt, Department of Materials and Earth Sciences, Nonmetallic-Inorganic Materials, Darmstadt, Germany

    person_pinMichael SCHERER, Technical University of Darmstadt, Department of Materials and Earth Sciences, Nonmetallic-Inorganic Materials, Darmstadt, Germany
    15:15 - 15:30 | Modelling of the enhanced densification in ultra-fast high temperature sintering: impact of porosity shape
     
    Shufan WANG, Institute of Applied Powder Metallurgy and Ceramics at RWTH Aachen e. V. (IAPK), RWTH Aachen University, Aachen, Germany
    Andrey MAKSYMENKO, Department of Mechanical Engineering, San Diego State University, San Diego, United States
    Yuanbin DENG,
    Anke KALETSCH,
    Eugene OLEVSKY, Department of Mechanical Engineering, San Diego State University, San Diego, United States
    Christoph BROECKMANN,

    person_pinShufan WANG, Institute of Applied Powder Metallurgy and Ceramics at RWTH Aachen e. V. (IAPK), RWTH Aachen University, Aachen, Germany
    15:30 - 15:45 | Tailoring microstructure and properties of stereolithographic 3D-printed alumina  Anna-Katharina HOFER, Montanuniversitaet Leoben, Leoben, Austria
    Andraž KOCJAN, Jožef Stefan Institute, Ljubljana, Slovenia
    Martin SCHWENTENWEIN, Lithoz GmbH, Vienna, Austria
    Raul BERMEJO, Montanuniversitaet Leoben, Leoben, Austria

    person_pinAnna-Katharina HOFER, Montanuniversitaet Leoben, Leoben, Austria
    15:45 - 16:00 | COUPLING 3D PRINTING WITH SPARK PLASMA SINTERING (SPS): A NEW APPROACH TOWARDS THE RAPID PROTOTYPING OF ADVANCED MATERIALSRiccardo BRUCCULERI, Università di Pavia, Pavia, Italy
    Lorenzo AIROLDI, Università di Pavia, Pavia, Italy
    Primo BALDINI, Università di Pavia, Pavia, Italy
    Simone MORGANTI, Università di Pavia, Pavia, Italy
    Ferdinando AURICCHIO, Università di Pavia, Pavia, Italy
    Umberto ANSELMI-TAMBURINI, Università di Pavia, Pavia, Italy

    person_pinRiccardo BRUCCULERI, Università di Pavia, Pavia, Italy
    16:00 - 16:15 | Reactive field assisted sintering (FAST/SPS) of various garnets for plasma etching applicationsChristian STERN, Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research (IEK), Jülich, Germany
    Moritz KINDELMANN,
    Mark STAMMINGER, Ruhr University Bochum, Institute for Experimental Physics II, Bochum, Germany
    Christian SCHWAB, Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research (IEK), Jülich, Germany
    Inhee PARK, Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research (IEK), Jülich, Germany
    Martin BRAM, Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research (IEK), Jülich, Germany
    Olivier GUILLON, Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research (IEK), Jülich, Germany

    person_pinChristian STERN, Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research (IEK), Jülich, Germany
    HL14:30 - 15:00 | Ceramic stereolithography paste rheology: structural evolution under shear and vibration fluidification effectSylvain FOURNIER, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR5510, Villeurbanne, France
    Guilhem BAEZA, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR5510, Villeurbanne, France
    Thierry DOUILLARD, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR5510, Villeurbanne, France
    Mario MINALE, Dept. of Industrial and Information Engineering, Second University of Naples, Real Casa dell’Annunziata, via Roma 29, Aversa, Italy
    Claudia CAROTENUTO, Dept. of Industrial and Information Engineering, Second University of Naples, Real Casa dell’Annunziata, via Roma 29, Aversa, Italy
    Jérôme CHEVALIER, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR5510, Villeurbanne, France
    Helen REVERON, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR5510, Villeurbanne, France

    person_pinSylvain FOURNIER, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR5510, Villeurbanne, France
    15:00 - 15:15 | Why delamination cracks occur in ceramics manufactured via DLP, and how to eliminate them?Wadih YARED, IFKB - Universität Stuttgart, Stuttgart, Germany

    person_pinWadih YARED, IFKB - Universität Stuttgart, Stuttgart, Germany
    15:15 - 15:30 | What does dynamic molding do for ceramic materials?Edwin-Joffrey COURTIAL,
    Ambra PATERLINI, 3d.FAB, Univ Lyon, Université Lyon1, CNRS, INSA, CPE-Lyon, ICBMS, UMR 5246, Villeurbanne, France

    person_pinEdwin-Joffrey COURTIAL, 3d.FAB, Univ Lyon, Université Lyon1, CNRS, INSA, CPE-Lyon, ICBMS, UMR 5246, Villeurbanne, France; 3Deus Dynamics, Villeurbanne, France
    15:30 - 15:45 | SOL-GEL-DERIVED FORMULATIONS FOR THREE-DIMENSIONAL PRINTING OF CARBIDE-BASED MATERIALSAlice ZANINI, Università degli Studi di Padova, Department of Industrial Engineering, Padova, Italy
    May Yam MOSHKOVITZ, Hebrew University of Jerusalem, Casali Center for Applied Chemistry, Jerusalem, Israel
    Sara Maria CARTURAN,
    Stefano CORRADETTI, INFN, Laboratori Nazionali di Legnaro, Legnaro, Italy
    Paolo COLOMBO, Università degli Studi di Padova, Department of Industrial Engineering, Padova, Italy
    Shlomo MAGDASSI, Hebrew University of Jerusalem, Casali Center for Applied Chemistry, Jerusalem, Israel
    Giorgia FRANCHIN, Università degli Studi di Padova, Department of Industrial Engineering, Padova, Italy

    person_pinAlice ZANINI, Università degli Studi di Padova, Department of Industrial Engineering, Padova, Italy
    15:45 - 16:00 | Development of Novel Solutions for Robotic 3D Ceramic Paste Printing Tavs JORGENSEN, Univeristy of the West of England, Bristol, United Kingdom
    Sonny LIGHTFOOT, Univeristy of the West of England, Bristol, United Kingdom
    Michael JOYCE-BADEA, Univeristy of the West of England, Bristol, United Kingdom
    Farzad FARZADNIA, Univeristy of the West of England, Bristol, United Kingdom
    Michael WHITE, Univeristy of the West of England, Bristol, United Kingdom

    person_pinTavs JORGENSEN, Univeristy of the West of England, Bristol, United Kingdom
    16:00 - 16:15 | Silica-based 3D-printed porous architectures using UV-cured nanocomposite resins  Clément LAUTE, CEA Le Ripault, Monts , France
    Bruno PINTAULT, CEA Le Ripault, Monts , France
    Sylvain CHUPIN, CEA Le Ripault, Monts , France
    Denis ROCHAIS , CEA Le Ripault, Monts , France
    Clément SANCHEZ, Chimie de la Matière Condensée de Paris, Université Pierre et Marie Curie (Paris VI), Collège de France , Paris, France
    Philippe BELLEVILLE, CEA Le Ripault, Monts , France

    person_pinClément LAUTE, CEA Le Ripault, Monts , France
    16:15 - 16:30 | Two-Photon-Polymerization for Ceramics Powder ProcessingJens GÜNSTER, BAM, Berlin, Germany

    person_pinJens GÜNSTER, BAM, Berlin, Germany
    HL14:30 - 15:00 | Strategic advancements on environmental barrier coatings for SiCf/SiC compositeJingyang WANG, Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China

    person_pinJingyang WANG, Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China
    HL15:00 - 15:30 | Image-based modeling of the processing of Ceramic Matrix Composites by Chemical Vapor Infiltration with Thermal GradientsGerard VIGNOLES, LCTS - Univ. Bordeaux/CNRS/CEA/Safran, Pessac, France

    person_pinGerard VIGNOLES, LCTS - Univ. Bordeaux/CNRS/CEA/Safran, Pessac, France
    15:30 - 15:45 | Approaches for Modelling and Simulation of Ceramic Matrix CompositesSimon UNSELD, Augsburg University of Applied Sciences, Augsburg, Germany
    Ralf GOLLER, Augsburg University of Applied Sciences, Augsburg, Germany
    Dietmar KOCH, Augsburg University, Augsburg, Germany

    person_pinSimon UNSELD, Augsburg University of Applied Sciences, Augsburg, Germany
    15:45 - 16:00 | A numerical method to simulate the intra-tows mechanical behaviour of oxide/oxide CMCs: coupling of a lattice with a FE continuumThierry CANET, Institut Clement Ader (ICA) ; Université de Toulouse ; CNRS, IMT Mines Albi, INSA, ISAE-SUPAERO, UPS, Albi, France
    Gilles DUSSERRE, Institut Clement Ader (ICA) ; Université de Toulouse ; CNRS, IMT Mines Albi, INSA, ISAE-SUPAERO, UPS, Albi, France
    Thierry CUTARD, Institut Clement Ader (ICA) ; Université de Toulouse ; CNRS, IMT Mines Albi, INSA, ISAE-SUPAERO, UPS, Albi, France

    person_pinThierry CANET, Institut Clement Ader (ICA) ; Université de Toulouse ; CNRS, IMT Mines Albi, INSA, ISAE-SUPAERO, UPS, Albi, France
    16:00 - 16:15 | Implementation of a damage model for tension and bending of Ceramic Matrix Composites with statistical distribution of propertiesEdoardo NOVEMBRE, Department of Aerospace Science and Technology (DAER), Politecnico di Milano, Milan, Italy
    Alessandro AIROLDI, Department of Aerospace Science and Technology (DAER), Politecnico di Milano, Milan, Italy
    Marco RIVA, Department of Aerospace Science and Technology (DAER), Politecnico di Milano, Milan, Italy
    Antonio Maria CAPORALE, Department of Aerospace Science and Technology (DAER), Politecnico di Milano, Milan, Italy
    Lorenzo CAVALLI, Petroceramics S.p.A., Stezzano (BG), Italy
    Mario DE STEFANO FUMO, Italian Aerospace Research Centre (CIRA), Capua (CE), Italy

    person_pinEdoardo NOVEMBRE, Department of Aerospace Science and Technology (DAER), Politecnico di Milano, Milan, Italy
    16:15 - 16:30 | Solid solution mechanism in sintering of (ZrTiTaV)C high-entropy carbideChong WEI, Northwestern Polytechnical University, XI'AN, China
    Biao PENG, Northwestern Polytechnical University, XI'AN, China
    Cheng ZHANG, Northwestern Polytechnical University, XI'AN, China
    Xiaoqiang LI, Northwestern Polytechnical University, XI'AN, China

    person_pinChong WEI, Northwestern Polytechnical University, XI'AN, China
    14:30 - 14:45 | Spark Plasma Sintering of boron carbide with metal disilicidesCristina OJALVO, Department of Mechanical, Energy and Materials Engineering, University of Extremadura, 06006, Badajoz, Spain
    Víctor ZAMORA, Department of Mechanical, Energy and Materials Engineering, University of Extremadura, 06006, Badajoz, Spain
    Fernando GUIBERTEAU, Department of Mechanical, Energy and Materials Engineering, University of Extremadura, 06006, Badajoz, Spain
    Ángel Luis ORTIZ, Department of Mechanical, Energy and Materials Engineering, University of Extremadura, 06006, Badajoz, Spain

    person_pinCristina OJALVO, Department of Mechanical, Energy and Materials Engineering, University of Extremadura, 06006, Badajoz, Spain
    14:45 - 15:00 | Low temperature sintering of ultra-hard and wear resistant ceramics based on boron carbide.Víctor ZAMORA RODRÍGUEZ, University of Extremadura, Badajoz, Spain
    Francisco Javier MARTÍNEZ VÁZQUEZ, University of Seville, Seville, Spain
    Fernando GUIBERTEAU CABANILLAS, University of Extremadura, Badajoz, Spain
    Ángel Luis ORTIZ SECO, University of Extremadura, Badajoz, Spain

    person_pinVíctor ZAMORA RODRÍGUEZ, University of Extremadura, Badajoz, Spain
    15:00 - 15:15 | Silicon nitride materials with superlubricity  Mathias HERRMANN, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden , Germany
    Tobias AMMAN, Fraunhofer Institute for Mechanics of Materials IWM, Freiburg , Germany
    Eveline ZSCHIPPANG, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden , Germany
    Andreas KAILER, Fraunhofer Institute for Mechanics of Materials IWM, Freiburg , Germany

    person_pinMathias HERRMANN, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden , Germany
    15:15 - 15:30 | Silicon nitride substrates for power electronicsEveline ZSCHIPPANG, Fraunhofer IKTS, Dresden, Germany
    Lea SCHMIDTNER, Fraunhofer IKTS, Dresden, Germany
    Jonas HOERIG, Fraunhofer CSP, Halle, Germany
    Mathias HERRMANN, Fraunhofer IKTS, Dresden, Germany

    person_pinEveline ZSCHIPPANG, Fraunhofer IKTS, Dresden, Germany
    15:30 - 15:45 | Elaboration by Spark Plasma Sintering and properties of dense Si2N2O ceramics prepared with Al2O3, Y2O3 and/or Sm2O3 additivesSophie BEAUDET SAVIGNAT, CEA DAM Le Ripault, MONTS, France
    Louise SEVIN, CEA DAM Le Ripault, MONTS, France
    Nicolas LOCHET, CEA Saclay, GIF sur YVETTE, France

    person_pinSophie BEAUDET SAVIGNAT, CEA DAM Le Ripault, MONTS, France
    15:45 - 16:00 | Spark plasma sintering of tungsten boride sputtering targets: optimization and upscalingMaria WISNIEWSKA, Łukasiewicz Research Network – Poznań Institute of Technology, 6 Ewarysta Estkowskiego St., 61-755, Poznan, Poland
    Mateusz MARCZEWSKI, Łukasiewicz Research Network – Poznań Institute of Technology, 6 Ewarysta Estkowskiego St., 61-755, Poznan, Poland
    Alexander M. LAPTEV, Łukasiewicz Research Network – Poznań Institute of Technology, 6 Ewarysta Estkowskiego St., 61-755, Poznan, Poland
    Agnieszka KRAWCZYNSKA, Faculty of Materials Science and Engineering, Warsaw University of Technology, 141 Woloska St., 02-507 , Warsaw, Poland
    Malgorzata LEWANDOWSKA, Faculty of Materials Science and Engineering, Warsaw University of Technology, 141 Woloska St., 02-507 , Warsaw, Poland
    Tomasz MOSCICKI, Institute of Fundamental Technological Research Polish Academy of Sciences, 5B Pawinskiego St., 02-106, Warsaw, Poland
    Dariusz GARBIEC, Łukasiewicz Research Network – Poznań Institute of Technology, 6 Ewarysta Estkowskiego St., 61-755, Poznan, Poland

    person_pinMaria WISNIEWSKA, Łukasiewicz Research Network – Poznań Institute of Technology, 6 Ewarysta Estkowskiego St., 61-755, Poznan, Poland
    HL14:30 - 15:00 | Carbon vacancy ordering in multi-principal component (high entropy) UHTC carbidesTheresa DAVEY, Tohoku University, Sendai, Japan
    Ying CHEN, Tohoku University, Sendai, Japan

    person_pinTheresa DAVEY, Tohoku University, Sendai, Japan
    15:00 - 15:15 | High-entropy transition metal diborides for applications in harsh environmentsFrederic MONTEVERDE, ISSMC-CNR, FAENZA, Italy
    Mattia GABOARDI, Elettra - Sincrotrone Trieste S.C.p.A., Trieste, Italy
    William FAHRENHOLTZ, Missouri University of Science and Technology, Rolla, United States
    Gregory HILMAS, Missouri University of Science and Technology, Rolla, United States

    person_pinFrederic MONTEVERDE, ISSMC-CNR, FAENZA, Italy
    15:15 - 15:30 | Pressureless Sintering of Dual Phase High Entropy Boride-Carbide CeramicsSteven SMITH II, Missouri University of Science and Technology, Rolla, United States
    William FAHRENHOLTZ, Missouri University of Science and Technology, Rolla, United States
    Gregory HILMAS, Missouri University of Science and Technology, Rolla, United States

    person_pinWilliam FAHRENHOLTZ, Missouri University of Science and Technology, Rolla, United States
    15:30 - 15:45 | Processing and Characterization of Ultra High-Temperature Binary and High-Entropy BoridesSimone BARBAROSSA, Dip. Ing. Meccanica, Chimica e dei Materiali, University of Cagliari, Cagliari, Italy
    Roberto ORRU', Dip. Ing. Meccanica, Chimica e dei Materiali, University of Cagliari, Cagliari, Italy
    Giacomo CAO, Dip. Ing. Meccanica, Chimica e dei Materiali, University of Cagliari, Cagliari, Italy
    Sebastiano GARRONI, Dipartimento di Scienze Chimiche, Fisiche, Matematiche e Naturali, University of Sassari, Sassari, Italy

    person_pinRoberto ORRU', Dip. Ing. Meccanica, Chimica e dei Materiali, University of Cagliari, Cagliari, Italy
    15:45 - 16:00 | Effect of SiC on densification and mechanical properties of (Ti-Zr-Hf-Nb-Ta)B2 high entropy ceramicsVasanthakumar KOMBAMUTHU, CEMEA – Center of Excellence for Advanced Materials Applications, Slovak Academy of Sciences, Bratislava, Slovakia
    Monika TATARKOVÁ, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Bratislava, Slovakia
    Hakan ÜNSAL, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Bratislava, Slovakia
    Zdenek CHLUP, Institute of Physics of Materials, Czech Academy of Sciences, Brno, Czechia
    Alexandra KOVALCÍKOVÁ, Institute of Materials Research, Slovak Academy of Sciences, Kosice, Slovakia
    Inga ZHUKOVA, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Bratislava, Slovakia
    Hicák MICHAL, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Bratislava, Slovakia
    Ivo DLOUHÝ, Institute of Physics of Materials, Czech Academy of Sciences, Brno, Czechia
    Ján DUSZA, Institute of Materials Research, Slovak Academy of Sciences, Kosice, Slovakia
    Peter TATARKO,

    person_pinPeter TATARKO, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Bratislava, Slovakia; CEMEA – Center of Excellence for Advanced Materials Applications, Slovak Academy of Sciences, Bratislava, Slovakia
    16:00 - 16:15 | Impact of the processing conditions on the microstructure and properties of entropy stabilised ultra-high temperature carbidesChristopher BUTLER, Imperial College London, London, United Kingdom

    person_pinChristopher BUTLER, Imperial College London, London, United Kingdom
    HL14:30 - 15:00 | Mechanoluminescence of a glass/ceramic particulate composite and of an oxynitride glass-ceramicMarion DUBERNET, , Rennes, FRANCE
    Alexis DUVAL, , Rennes, FRANCE
    Patrick HOUIZOT, , Rennes, FRANCE
    Tanguy ROUXEL,

    person_pinTanguy ROUXEL, , Rennes, FRANCE; Institut Universitaire de France
    15:00 - 15:15 | Microstructural evolutions and thermomechanical properties of enameled glass for automotive applicationsAntoine LEJEUNE,
    Jérôme CHEVALIER, MatéIS INSA Lyon, Villeurbanne, France
    Philippe STEYER, MatéIS INSA Lyon, Villeurbanne, France
    Sylvain MEILLE, MatéIS INSA Lyon, Villeurbanne, France
    Laurent GREMILLARD, MatéIS INSA Lyon, Villeurbanne, France
    Juliette JAMART, Saint-Gobain Research Compiègne, Thourotte, France

    person_pinAntoine LEJEUNE, MatéIS INSA Lyon, Villeurbanne, France; Saint-Gobain Research Compiègne, Thourotte, France
    15:15 - 15:30 | Solid-state field-assisted ion exchange of Ag in lithium aluminum silicate glass-ceramicsMattia BIESUZ, University of Trento, Trento, Italy
    Vincenzo M. SGLAVO, University of Trento, Trento, Italy
    Gian D. SORARÙ, University of Trento, Trento, Italy

    person_pinMattia BIESUZ, University of Trento, Trento, Italy