•  

    Full conference program

  • LEgend
    •  S1
    •  S2
    •  S3
    •  S4
    •  S5
    •  S6
    •  S7
    •  S8
    •  S9
    •  S10
    •  S11
    •  S12
    •  SS13
    •  SS14
    •  SS15
    •  SS16
    •  Plenary / Keynote / Highlight 
    •  Scientific Event / Social Event
    • Posters
    • Speaker
  • The search engine will allow you to find speakers, authors, session titles, abstract titles.
    You can use the "Symposia" filter and the search engine to narrow your program research.
     
    11:00 - 11:30 | Advances in Photon-harvesting Technologies for Perovskite Absorbers and Water Splitting Reactions  Sanjay MATHUR, University of Cologne, Cologne, Germany

    person_pinSanjay MATHUR, University of Cologne, Cologne, Germany
    11:30 - 12:00 | High Entropy Perovskites for Green Hydrogen Generation/UtilizationXingbo LIU, West Virginia University, Morgantown, United States

    person_pinXingbo LIU, West Virginia University, Morgantown, United States
    12:00 - 12:30 | Self-supported electrocatalysts of tantalum-based nitrides developed through precursor derived route for hydrogen evolutionKumar RAVI , Indian Institute of Technology Madras, Chennai, India
    Raghunath Sharma MUKKAVILLI , Indian Institute of Technology Madras, Chennai, India
    Ganesh Babu THIYAGARAJAN, Indian Institute of Technology Madras, Chennai, India
    Arunkumar B R, Indian Institute of Technology Madras, Chennai, India
    David GRAF, University of Cologne, Cologne, Germany
    Thomas FISCHER, University of Cologne, Cologne, Germany
    Michael WILHELM, University of Cologne, Cologne, Germany
    Silke CHRISTIANSEN, Fraunhofer IKTS, Dresden, Germany
    Sanjay MATHUR, University of Cologne, Cologne, Germany

    person_pinKumar RAVI , Indian Institute of Technology Madras, Chennai, India
    12:30 - 13:00 | Advances and Challenges to the Manufacturing of Electroceramics with Cold SinteringClive RANDALL, The Pennsylvania State University, United States

    person_pinClive RANDALL, The Pennsylvania State University, United States
    14:30 - 15:00 | Compositional and Structural Disorder: Valuable Preparative Tools toward Novel Materials and Enablers for the Circular EconomyIonescu EMANUEL,
    Dharma Teja TEPPALLA, TU Darmstadt, Darmstadt, Germany
    Gert HOMM, Fraunhofer IWKS, Alzenau, Germany
    Anke WEIDENKAFF,

    person_pinIonescu EMANUEL, Fraunhofer IWKS, Alzenau, Germany; TU Darmstadt, Darmstadt, Germany
    15:00 - 15:30 | The Polymer-Derived Ceramics route as an innovative concept towards functional inorganic materials with boosted propertiesMarwan BEN MILED, Institute of Research for Ceramics (IRCER), Limoges, France
    Maxime CHEYPE, Institute of Research for Ceramics (IRCER), Limoges, France
    Xavier DESCHANELS, Institut de Chimie Séparative de Marcoule (ICSM) , Marcoule, France
    Aurélien HABRIOUX, Institut de Chimie des Milieux et Matériaux de Poitiers (IC2MP), Poitiers, France
    Samuel BERNARD, Institute of Research for Ceramics (IRCER), Limoges, France

    person_pinSamuel BERNARD, Institute of Research for Ceramics (IRCER), Limoges, France
    15:30 - 16:00 | Macro-porous ceramics for the Sustainable Development Goals (SDGs)Tatsuki OHJI, National Institute of Advanced Industrial Science and Technology (AIST), Nagoya, Japan
    Manabu FUKUSHIMA, National Institute of Advanced Industrial Science and Technology (AIST), Nagoya, Japan

    person_pinTatsuki OHJI, National Institute of Advanced Industrial Science and Technology (AIST), Nagoya, Japan
    16:00 - 16:30 | Machine-learning Based Microstructure-property Relationships for Ceramics Using High-Throughput, Ultra-fast Laser Sintering  Xiao GENG, Clemson University, Clemson, United States
    Jianan TANG, Clemson University, Clemson, United States
    Siddhartha SARKAR, Clemson University, Clemson, United States
    Bridget SHERIDAN, Clemson University, Clemson, United States
    Dongsheng LI, Advanced Manufacturing LLC, East Hartford, United States
    Yunfeng SHI, Rensselaer Polytechnic Institute, Troy, United States
    Jianhua TONG, Clemson University, Clemson, United States
    Hai XIAO, Clemson University, Clemson, United States
    Fei PENG, Clemson University, Clemson, United States
    Rajendra BORDIA, Clemson University, Clemson, United States

    person_pinRajendra BORDIA, Clemson University, Clemson, United States
    17:00 - 17:30 | About the exchange-bias feature in magnetically contrasted oxide-based SPSed nanoconsolidatesThomas GAUDISSON, Université Paris Cité, Paris, France
    Nancy FLORES, Université Paris Cité, Paris, France
    Giulia FRANCESCHIN, Université Paris Cité, Paris, France
    Sophie NOWAK, Université Paris Cité, Paris, France
    Souad AMMAR, Université Paris Cité, Paris, France

    person_pinSouad AMMAR, Université Paris Cité, Paris, France
    17:30 - 18:00 | Perspectives on functionally graded ceramicsOmer VAN DER BIEST, Department of Materials Engineering, KU Leuven, Leuven, Belgium

    person_pinOmer VAN DER BIEST, Department of Materials Engineering, KU Leuven, Leuven, Belgium
    18:00 - 18:30 | Routes for deriving nanostructured ceramics suitable for smart materialsVilko MANDIC, Faculty of Chemical Engineering and Technology, University of Zagreb, Zagreb, Croatia
    Ivana PANŽIC, Materials Center Leoben Forschung GmbH, Leoben, Austria

    person_pinVilko MANDIC, Faculty of Chemical Engineering and Technology, University of Zagreb, Zagreb, Croatia
    18:30 - 19:00 | Transparent ceramic materials: enabling new and multifunctional optical and photonic applicationsYiquan WU, New York State College of Ceramics, Alfred University , Alfred , United States

    person_pinYiquan WU, New York State College of Ceramics, Alfred University , Alfred , United States
    K08:30 - 09:15 | From archaeological to contemporary celadonsJean François FOUILHOUX, Maisons des Artistes , paris/ AIC Genève, p
    Armand DESBAT, Laboratoire ArAr UMR 5138, LYON, FRANCE

    person_pinJean François FOUILHOUX, Maisons des Artistes , paris/ AIC Genève, p
    Armand DESBAT, Laboratoire ArAr UMR 5138, LYON, FRANCE
    09:15 - 09:30 | Not just the vessels: tracing the Early Rus' commerce through medieval amphorae studiesAnastasiia KOROKHINA,
    Sylvie Yona WAKSMAN, CNRS UMR5138 "Archéologie & Archéométrie", Lyon, France
    Mariia TYMOSHENKO, Museum of Kyiv History, Kyiv, Ukraine
    Natalia KHAMAIKO,
    Maciej TRZECIECKI, Institute of Archaeology and Ethnology Polish Academy of Sciences, Warsaw, Poland
    Michal AUCH, Institute of Archaeology and Ethnology Polish Academy of Sciences, Warsaw, Poland
    Marcin WO?OSZYN,

    person_pinAnastasiia KOROKHINA, Leibniz Institute for the History and Culture of Eastern Europe (GWZO), Leipzig, Germany; Institute of Archaeology, National Academy of Sciences of Ukraine, Kyiv, Ukraine
    09:30 - 09:45 | Ceramics during the Middle Ages in Navarra: production centres, sources of raw materials and ceramics tradeIván RUIZ-ARDANAZ, University of Navarra, Chemistry Department (Irunlarrea, 1, Edificio de Investigación, 31008, Pamplona, Navarra), Spain
    Esther LASHERAS, University of Navarra, Chemistry Department (Irunlarrea, 1, Edificio de Investigación, 31008, Pamplona, Navarra), Spain
    Adrián DURÁN, University of Navarra, Chemistry Department (Irunlarrea, 1, Edificio de Investigación, 31008, Pamplona, Navarra), Spain

    person_pinIván RUIZ-ARDANAZ, University of Navarra, Chemistry Department (Irunlarrea, 1, Edificio de Investigación, 31008, Pamplona, Navarra), Spain
    09:45 - 10:00 | San Diego wreck ceramics and archaeometry of a global world  Alejandro PINILLA, Instituto de Historia, CSIC. Calle Albasanz, 26-28., 28037 Madrid, Spain
    Fatima QUIJADA, Instituto de Historia, CSIC. Calle Albasanz, 26-28., 28037 Madrid, Spain
    Fernando AGUA, Instituto de Historia, CSIC. Calle Albasanz, 26-28., 28037 Madrid, Spain
    Mangeles VILLEGAS, Instituto de Historia, CSIC. Calle Albasanz, 26-28., 28037 Madrid, Spain
    Susana GARCIA, Museo Naval. Paseo del Prado, 5., 28014 Madrid, Spain
    Manuel GARCIA-HERAS, Instituto de Historia, CSIC. Calle Albasanz, 26-28., 28037 Madrid, Spain

    person_pinManuel GARCIA-HERAS, Instituto de Historia, CSIC. Calle Albasanz, 26-28., 28037 Madrid, Spain
    10:00 - 10:15 | Technological and stylistic characteristics of Chupicuaro ceramic wares (Formative Mesoamerica)Fanny ALLOTEAU, Université Bordeaux Montaigne – Archéosciences Bordeaux, UMR CNRS 6034, Bordeaux, France
    Ayed BEN AMARA, Université Bordeaux Montaigne – Archéosciences Bordeaux, UMR CNRS 6034, Bordeaux, France
    Nadia CANTIN, Université Bordeaux Montaigne – Archéosciences Bordeaux, UMR CNRS 6034, Bordeaux, France
    Hector CABADAS BAEZ, Universidad Autónoma del Estado de México, UAEM – Faculty of Geography , Bordeaux, Mexico
    Alejandra CASTANEDA, Universidad Autónoma del Estado de México, UAEM – Faculty of Geography , Bordeaux, Mexico
    Sergey SEDOV, Universidad Autónoma del Estado de México, UAEM – Faculty of Geography , Bordeaux, Mexico
    Véronique DARRAS, Universidad Autónoma del Estado de México, UAEM – Faculty of Geography , Bordeaux, Mexico
    Georgina IBARRA, Universidad Autónoma del Estado de México, UAEM – Faculty of Geography , Bordeaux, Mexico

    person_pinFanny ALLOTEAU, Université Bordeaux Montaigne – Archéosciences Bordeaux, UMR CNRS 6034, Bordeaux, France
    10:15 - 10:30 | New insight into the provenance and technology of Byzantine Polychrome White WareYona WAKSMAN, CNRS UMR5138 "Archéologie & Archéométrie", Lyon, France
    Anne BOUQUILLON,
    Katerina AMPRAZOGOULA, Ephorate of antiquities of Chalkidiki and of the Mount Athos, Thessaloniki, Greece
    Aikaterini TSANANA, Ephorate of antiquities of Chalkidiki and of the Mount Athos, Thessaloniki, Greece

    person_pinYona WAKSMAN, CNRS UMR5138 "Archéologie & Archéométrie", Lyon, France
    08:30 - 09:00 | Refractories, Composites and Recyclates: Approaches for sustainability and strategic sovereigntyChristos ANEZIRIS, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    Patrick GEHRE, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    Jana HUBALKOVA, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    Tilo ZIENERT, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    Steffen DUDCZIG, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    Piotr MALCZYK, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    Serhii YAROSHEVSKYI, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany

    person_pinChristos ANEZIRIS, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    09:00 - 09:30 | Rapid Hot-pressed silicon carbide ceramics for ultra-high temperature applicationsPavol SAJGALIK, Slovak Academy of Sciences, Bratislava, Slovakia
    Ondrej HNAZEL, Slovak Academy of Sciences, Bratislava, Slovakia
    Alexandra KOVALCIKOVA, Slovak Academy of Sciences, Bratislava, Slovakia
    Zhang CHENGYU, North Western Polytechnic University, Xi´An, China
    Alexander MUKASYAN, University of Notre Dame, Notre Dame, IN, United States

    person_pinPavol SAJGALIK, Slovak Academy of Sciences, Bratislava, Slovakia
    09:30 - 10:00 | Electrical, thermal, and mechanical properties of porous solid-state sintered SiC ceramicsYoung-Wook KIM, University of Seoul, Seoul, Korea (Republic of)
    Yeong-Jun OH, University of Seoul, Seoul, Korea (Republic of)
    Kwang Ho KIM, Global Frontier R&D Center, Pusan National University, Busan, Korea (Republic of)

    person_pinYoung-Wook KIM, University of Seoul, Seoul, Korea (Republic of)
    10:00 - 10:30 | Review: Mechanical Properties of Porous Silicon Nitride Ceramics with Controlled MicrostructuresStuart HAMPSHIRE, University of Limerick, Limerick, Ireland
    Aránzazu DÍAZ-CUENCA,

    person_pinStuart HAMPSHIRE, University of Limerick, Limerick, Ireland
    HL08:30 - 09:00 | Backgrounds and clinical application of dental ceramic implantsJens TARTSCH, European Society for Ceramic Implantology, ESCI

    person_pinJens TARTSCH, European Society for Ceramic Implantology, ESCI
    K09:00 - 09:30 | Present status and future prospects of zirconia oral implantsRalf KOHAL, University of Freiburg, Faculty of Medicine, University of Freiburg, 79106 Freiburg,, Germany

    person_pinRalf KOHAL, University of Freiburg, Faculty of Medicine, University of Freiburg, 79106 Freiburg,, Germany
    09:30 - 09:45 | In vivo ageing of zirconia dental ceramicsPeter JEVNIKAR, University of Ljubljana , Slovenia

    person_pinPeter JEVNIKAR, University of Ljubljana , Slovenia
    09:45 - 10:00 | Translational fractography of one- and two-piece clinically failed zirconia implantsFei ZHANG,
    Mona MONZAVI, Periodontics and Ceramic Implantology (private practice), Santa Ana, United States
    Jef VLEUGELS, KU Leuven, Department of Materials Engineering, Heverlee, Belgium
    Bart VAN MEERBEEK, KU Leuven, Department of Oral Health Sciences, Leuven, Belgium

    person_pinFei ZHANG, KU Leuven, Department of Materials Engineering, Heverlee, Belgium; KU Leuven, Department of Oral Health Sciences, Leuven, Belgium
    10:00 - 10:15 | In vitro lifetime assessment of zirconia dental ceramicsChong WEI, Northwestern Polytechnical University, XI'AN, China
    Shibao LI, Fourth Military Medical University, XI'AN, China
    Laurent GREMILLARD, INSA-Lyon, Villeurbanne, France

    person_pinChong WEI, Northwestern Polytechnical University, XI'AN, China
    10:15 - 10:30 | Ceramics in Dental Applications: Favorable Surface Properties and Novel Manufacturing of Established MaterialsAlessandro Alan PORPORATI,
    Yvonne MÖDINGER, CeramTec GmbH, Plochingen, Germany

    person_pinAlessandro Alan PORPORATI, CeramTec GmbH, Plochingen, Germany; Universita' degli Studi di Trieste, Department of Engineering and Architecture, Trieste, Italy
    HL11:00 - 11:30 | Lead antimonate in the pigments of Portuguese decorated tiles: experimental replications and scienctific characterisationMario BANDIERA , VICARTE - Glass and Ceramics for the Arts, FCT-NOVA, Caparica, Portugal
    Umberto VERONESI, VICARTE - Glass and Ceramics for the Arts, FCT-NOVA, Caparica, Portugal
    Marta MANSO,
    Alexandre PAIS, Museu Nacional do Azulejo, Lisbon , Portugal
    Lurdes ESTEVES, Museu Nacional do Azulejo, Lisbon , Portugal
    Andreia RUIVO,
    Márcia VILARIGUES,
    Susana COENTRO,

    person_pinUmberto VERONESI, VICARTE - Glass and Ceramics for the Arts, FCT-NOVA, Caparica, Portugal
    11:30 - 11:45 | Reproducing lead antimonate yellow glazes to understand ancient Middle Eastern practicesEmmie BEAUVOIT,
    Odile MAJÉRUS, Chimie ParisTech, CNRS, Institut de Recherche de Chimie Paris (IRCP), PSL Research University, Paris, France
    Daniel CAURANT, Chimie ParisTech, CNRS, Institut de Recherche de Chimie Paris (IRCP), PSL Research University, Paris, France
    Gilles WALLEZ,
    Julien CUNY, Musée du Louvre, Département des Antiquités Orientales, Paris, France
    Ariane THOMAS, Musée du Louvre, Département des Antiquités Orientales, Paris, France
    Anna PICCOLO, European Synchrotron Radiation Facility (ESRF), Grenoble, France
    Marine COTTE,
    Anne BOUQUILLON,

    person_pinEmmie BEAUVOIT, Centre de Recherche et de Restauration des Musées de France (C2RMF), Paris, France; Chimie ParisTech, CNRS, Institut de Recherche de Chimie Paris (IRCP), PSL Research University, Paris, France
    11:45 - 12:00 | Influence of glass coloring on the crystallization process of calcium antimonates in Roman glass tesseraeLéa GARDIE, Institut de Minéralogie, de Physique des Matériaux et de Cosmochimie (IMPMC), Sorbonne Université, CNRS, MNHN, IRD, Paris, France
    Laurent CORMIER, Institut de Minéralogie, de Physique des Matériaux et de Cosmochimie (IMPMC), Sorbonne Université, CNRS, MNHN, IRD, Paris, France
    Nadine SCHIBILLE, IRAMAT-CEB, Université d’Orléans, CNRS, Orléans, France

    person_pinLéa GARDIE, Institut de Minéralogie, de Physique des Matériaux et de Cosmochimie (IMPMC), Sorbonne Université, CNRS, MNHN, IRD, Paris, France
    12:00 - 12:15 | Composition and origin of early Roman polychrome mosaic glass from the collections of the Victoria & Albert MuseumLiam RICHARDS, UCL Institute of Archaeology, London, United Kingdom
    Ian FREESTONE, UCL Institute of Archaeology, London, United Kingdom
    Lucia BURGIO, V&A South Kensington, London, United Kingdom

    person_pinLiam RICHARDS, UCL Institute of Archaeology, London, United Kingdom
    12:15 - 12:30 | Characterization and interaction studies in two-layer glazed porcelain systems developed to replace lead glazes at SèvresAziliz LE BESCOND DE COATPONT,
    Gilles WALLEZ, Institut de Recherche de Chimie Paris, Paris, France
    Odile MAJERUS, Institut de Recherche de Chimie Paris, Paris, France
    Daniel CAURANT, Institut de Recherche de Chimie Paris, Paris, France
    Lucie LE BRIS, Van Cleef & Arpels, Paris, France
    Atika CHEMMI, Cité de la céramique - Sèvres et Limoges, Sèvres, France
    Lise BOUTENÈGRE, Institut de Recherche de Chimie Paris, Paris, France

    person_pinAziliz LE BESCOND DE COATPONT, Institut de Recherche de Chimie Paris, Paris, France; Van Cleef & Arpels, Paris, France
    12:30 - 12:45 | The production technology of Portuguese 16th-17th-century faience and its comparison with coeval azulejosSusana COENTRO,
    Mario BANDIERA, VICARTE - Research Unit "Glass and Ceramics for the Arts", NOVA School of Science and Technology, Caparica, Portugal
    Umberto VERONESI, VICARTE - Research Unit "Glass and Ceramics for the Arts", NOVA School of Science and Technology, Caparica, Portugal
    Victor LANCRENON,
    Alexandre N. PAIS, Museu Nacional do Azulejo, Lisbon, Portugal
    João Manuel MIMOSO, Laboratório Nacional de Engenharia Civil, Lisbon, Portugal

    person_pinSusana COENTRO, VICARTE - Research Unit "Glass and Ceramics for the Arts", NOVA School of Science and Technology, Caparica, Portugal; Department of Conservation and Restoration, NOVA School of Science and Technology, Caparica, Portugal
    12:45 - 13:00 | DECODING CERAMICS - the digital transmission of tacit knowledge in intangible cultural heritage.Anthony QUINN, Central Saint Martins - University of the Arts London, LONDON, United Kingdom
    Vilarigues MÁRCIA, VICARTE – Vidro e Cerâmica para as Artes and Deparymetn of Conservation and Restoration, NOVA School of Science and Technology, Portugal, Lisboa, Portugal

    person_pinAnthony QUINN, Central Saint Martins - University of the Arts London, LONDON, United Kingdom
    11:00 - 11:30 | Solid-state and Liquid-phase sintering: fundamental differences in densification and grain growthSuk-Joong L. KANG, Korea Advanced Institute of Science and Technology, Daejeon, Korea (Republic of)

    person_pinSuk-Joong L. KANG, Korea Advanced Institute of Science and Technology, Daejeon, Korea (Republic of)
    11:30 - 12:00 | Thermal conductivity measurements as a probe to study sintering mechanisms in oxide ceramics: hydroxyapatite, zirconia and aluminaDavid S. SMITH, University of Limoges, Institute of Research for Ceramics (IRCER), UMR CNRS 7315, 87068 Limoges, France
    Benoit NAIT-ALI, University of Limoges, Institute of Research for Ceramics (IRCER), UMR CNRS 7315, 87068 Limoges, France
    Clément GUILLET, University of Limoges, Institute of Research for Ceramics (IRCER), UMR CNRS 7315, 87068 Limoges, France
    Zonghao GUO, University of Oxford, Department of Materials, Oxford OX1 3PH, United Kingdom
    Richard I. TODD, University of Oxford, Department of Materials, Oxford OX1 3PH, United Kingdom
    Pierre LEFEUVRE, Université Polytechnique Hauts-de-France, INSA Hauts-de-France, CERAMATHS Laboratoire de Matériaux Céramiques et de Mathématiques, 59313 Valenciennes, France
    Maxence RENAUX, Université Polytechnique Hauts-de-France, INSA Hauts-de-France, CERAMATHS Laboratoire de Matériaux Céramiques et de Mathématiques, 59313 Valenciennes, France
    Anne LERICHE, Université Polytechnique Hauts-de-France, INSA Hauts-de-France, CERAMATHS Laboratoire de Matériaux Céramiques et de Mathématiques, 59313 Valenciennes, France

    person_pinDavid S. SMITH, University of Limoges, Institute of Research for Ceramics (IRCER), UMR CNRS 7315, 87068 Limoges, France
    12:00 - 12:30 | Selection of surfactants in 3-D-printing technologies: Fundamental aspects and application examplesThomas GRAULE, Empa, Laboratory for High Performance Ceramics, Duebendorf, Switzerland

    person_pinThomas GRAULE, Empa, Laboratory for High Performance Ceramics, Duebendorf, Switzerland
    12:30 - 13:00 | Improving piezoelectric ceramics by grain orientation control  Astri Bjørnetun HAUGEN, Technical University of Denmark, Kgs. Lyngby, Denmark

    person_pinAstri Bjørnetun HAUGEN, Technical University of Denmark, Kgs. Lyngby, Denmark
    HL11:00 - 11:30 | The development and application status of dental zirconia in past three decades in ChinaJianmin HAN, Peking University School and Hospital of Stomatology, Beijing , China

    person_pinJianmin HAN, Peking University School and Hospital of Stomatology, Beijing , China
    11:30 - 11:45 | Digital synergy: a 21st-century concept in digital dentistry A Dental Workflow in the Digital EraSebastjan PERKO, Medical Dentistry, clinic for comprehensive dentistry, Slovenska cesta 54, 1000 Ljubljana, Ljubljana, Slovenia
    TjašA ŽNIDARŠI?, DSLab, Digital Synergy Lab, Slovenska cesta 54, 1000 Ljubljana, Ljubljana, Slovenia
    Bojan VIDNIŠ, Medical Dentistry, clinic for comprehensive dentistry, Slovenska cesta 54, 1000 Ljubljana, Ljubljana, Slovenia
    Marko BERKOPEC, Medical Dentistry, clinic for comprehensive dentistry, Slovenska cesta 54, 1000 Ljubljana, Ljubljana, Slovenia
    Jelena BOŽIC, Medical Dentistry, clinic for comprehensive dentistry, Slovenska cesta 54, 1000 Ljubljana, Ljubljana, Slovenia
    Simon BELE, Medical Dentistry, clinic for comprehensive dentistry, Slovenska cesta 54, 1000 Ljubljana, Ljubljana, Slovenia
    Andraž KOCJAN, Department for Nanostructured materials, Jožef Stefan Institute, Jamova 39, 1000 Ljubljana, Ljubljana, Slovenia
    Shen ZHIJIAN, Department of Materials and Environmental Chemistry, Stockholm University, Stockholm, Sweden

    person_pinSebastjan PERKO, Medical Dentistry, clinic for comprehensive dentistry, Slovenska cesta 54, 1000 Ljubljana, Ljubljana, Slovenia
    11:45 - 12:00 | Pressure slip casting of multilayer blanks for dental restaurationsDaniel SCHUMACHER, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Hermsdorf, Germany
    Sabine BEGAND, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Hermsdorf, Germany

    person_pinDaniel SCHUMACHER, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Hermsdorf, Germany
    HL14:30 - 15:00 | Non-Invasive On-site Analysis of Coloring Agents, Marks and Enamels of Qing imperial porcelainPhilippe COLOMBAN, Sorbonne Université, MONARIS UMR8233 CNRS, Paris, France
    Gulsu SIMSEK FRANCI, Sorbonne Université, MONARIS UMR8233 CNRS, Paris, France

    person_pinPhilippe COLOMBAN, Sorbonne Université, MONARIS UMR8233 CNRS, Paris, France
    15:00 - 15:15 | Boron/Lithium-based flux in 18th Century Chinese porcelain enamels: PIXE/PIGE study.Jacques BURLOT, MONARIS UMR8233, Sorbonne Université, Paris, France
    Ludovic BELLOT-GURLET, MONARIS UMR8233, Sorbonne Université, Paris, France
    Quentin LEMASSON, Centre de Recherche et de Restauration des Musées de France (C2RMF), Paris, France
    Laurent PICHON, Centre de Recherche et de Restauration des Musées de France (C2RMF), Paris, France
    Philippe COLOMBAN, MONARIS UMR8233, Sorbonne Université, CNRS, Paris, France

    person_pinJacques BURLOT, MONARIS UMR8233, Sorbonne Université, Paris, France
    15:15 - 15:30 | Study of the yellow coloration of stained glass and contribution of portable spectroscopiesDéa JAÏS, Sorbonne Université, CNRS, Museum National d’Histoire Naturelle, Institut de Minéralogie, de Physique des Matériaux et de Cosmochimie (IMPMC), IRD, Paris, France
    Laurence GALOISY, Sorbonne Université, CNRS, Museum National d’Histoire Naturelle, Institut de Minéralogie, de Physique des Matériaux et de Cosmochimie (IMPMC), IRD, Paris, France
    Georges CALAS, Sorbonne Université, CNRS, Museum National d’Histoire Naturelle, Institut de Minéralogie, de Physique des Matériaux et de Cosmochimie (IMPMC), IRD, Paris, France
    Claudine LOISEL, Laboratoire de Recherche des Monuments Historiques, CRC, Ministère de la Culture, Champs-sur-Marne, France
    Barbara TRICHEREAU, Laboratoire de Recherche des Monuments Historiques, CRC, Ministère de la Culture, Champs-sur-Marne, France

    person_pinDéa JAÏS, Sorbonne Université, CNRS, Museum National d’Histoire Naturelle, Institut de Minéralogie, de Physique des Matériaux et de Cosmochimie (IMPMC), IRD, Paris, France
    15:30 - 15:45 | A photoluminescence- based method to sort the colourless Roman glass  Nadège OLLIER, LSI/ CEA/IP Paris, Palaiseau, France
    Jacques DE GARIDEL-THORON, LSI/ CEA/IP Paris, Palaiseau, France
    Florent GOULETTE, LSI/ CEA/IP Paris, Palaiseau, France
    Lisa SHAFROTH, LSI/ CEA/IP Paris, Palaiseau, France
    Bernard GRATUZE, IRAMAT CNRS, Orléans, France
    Aurore LOUIS, INRAP, Champagne Ardenne, France

    person_pinNadège OLLIER, LSI/ CEA/IP Paris, Palaiseau, France
    15:45 - 16:00 | Tangible facets of the art of painting glass slides for projection by magic lanternsMarcia VILARIGUES, VICARTE & DCR, NOVA School of Science and Technology, Almada, Portugal
    Vanessa OTERO, DCR, NOVA School of Science and Technology, Almada, Portugal
    Andreia RUIVO, VICARTE & DCR, NOVA School of Science and Technology, Almada, Portugal
    Carla MACHADO, VICARTE & DCR, NOVA School of Science and Technology, Almada, Portugal

    person_pinMarcia VILARIGUES, VICARTE & DCR, NOVA School of Science and Technology, Almada, Portugal
    14:30 - 15:00 | Joining and integration issues of ceramics and ceramic matrix composites  Monica FERRARIS, POLITECNICO DI TORINO, TORINO, Italy

    person_pinMonica FERRARIS, POLITECNICO DI TORINO, TORINO, Italy
    15:00 - 15:30 | Biophysical stimulation of stem cells on functional bioceramics: in vitro and in silico studiesBikramjit BASU, Indian Institute of Science, Bangalore, Karnataka, India, Bangalore, India

    person_pinBikramjit BASU, Indian Institute of Science, Bangalore, Karnataka, India, Bangalore, India
    15:30 - 16:00 | Molecule-like lanthanide-oxide clusters in ZnOGunnar WESTIN, Uppsala University, Uppsala, Sweden

    person_pinGunnar WESTIN, Uppsala University, Uppsala, Sweden
    16:00 - 16:30 | Ceramic all-solid-state lithium batteries:Facing the challenges by innovative manufacturing processes Olivier GUILLON, Forschungszentrum Jülich, Jülich, Germany
    Christoph ROITZHEIM, Forschungszentrum Jülich, Jülich, Germany
    Martin FINSTERBUSCH, Forschungszentrum Jülich, Jülich, Germany
    Dina FATTAKHOVA-ROHLFING, Forschungszentrum Jülich, Jülich, Germany

    person_pinChristoph ROITZHEIM, Forschungszentrum Jülich, Jülich, Germany
    HL14:30 - 15:00 | Testing of mechanical properties of dental ceramics: methods for classical and additively manufactured materialsTanja LUBE, Montanuniversitaet Leoben, Department of Materials Science, Leoben, Austria
    Maximilian STAUDACHER, Montanuniversitaet Leoben, Department of Materials Science, Leoben, Austria
    Peter SUPANCIC, Montanuniversitaet Leoben, Department of Materials Science, Leoben, Austria
    Uwe SCHEITHAUER, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden, Germany

    person_pinTanja LUBE, Montanuniversitaet Leoben, Department of Materials Science, Leoben, Austria
    15:00 - 15:15 | Lithography-based 3D printing of lithium disilicate ceramics for dental restorations  Serkan NOHUT,
    Sebastian GEIER, Lithoz GmbH, Mollardgasse 85a/2/64-69, A-1060, Vienna, Austria, Vienna, Austria
    Daniel BOMZE, Lithoz GmbH, Mollardgasse 85a/2/64-69, A-1060, Vienna, Austria, Vienna, Austria
    Martin SCHWENTENWEIN, Lithoz GmbH, Mollardgasse 85a/2/64-69, A-1060, Vienna, Austria, Vienna, Austria

    person_pinSerkan NOHUT, Lithoz GmbH, Mollardgasse 85a/2/64-69, A-1060, Vienna, Austria, Vienna, Austria; Department of Mechanical Engineering, Piri Reis University, 34940, Istanbul, Turkey, Istanbul, Turkey
    15:15 - 15:30 | Ceramic additive manufacturing for minimally invasive applications in prosthetic dentistryFranziska SCHMIDT, Charité Universitätsmedizin Berlin, Dept. for Prosthodontics, Berlin, Germany
    Alexey UNKOVSKIY, Charité Universitätsmedizin Berlin, Dept. for Prosthodontics, Berlin, Germany
    Daniel BOMZE, Lithoz GmbH, Vienna, Austria
    Jeremias HEY, Universitätsklinikum Halle (Saale), , Halle (Saale), Germany
    Florian BEUER, Charité Universitätsmedizin Berlin, Dept. for Prosthodontics, Berlin, Germany

    person_pinFranziska SCHMIDT, Charité Universitätsmedizin Berlin, Dept. for Prosthodontics, Berlin, Germany
    15:30 - 15:45 | Mechanical properties of additively-manufactured surface-treated 3Y and 5Y zirconiaTadej MIRT, Department of Prosthodontics, Faculty of Medicine, University of Ljubljana, Ljubljana, Slovenia
    Andraž KOCJAN, Department for Nanostructured Materials, Jožef Stefan Institute, Ljubljana, Slovenia
    Raul BERMEJO, Institut für Struktur- und Funktionskeramik, Montanuniversität Leoben, Leoben, Austria
    Peter JEVNIKAR, Department of Prosthodontics, Faculty of Medicine, University of Ljubljana, Ljubljana, Slovenia

    person_pinTadej MIRT, Department of Prosthodontics, Faculty of Medicine, University of Ljubljana, Ljubljana, Slovenia
    15:45 - 16:00 | Supercritical Carbon Dioxide as a Solvent in Debinding Stereolithography PrintsNonna NURMI, Faculty of Engineering and Natural Sciences, Tampere University, Tampere, Finland
    Erkka FRANKBERG, Faculty of Engineering and Natural Sciences, Tampere University, Tampere, Finland
    Antonia RESSLER, Faculty of Engineering and Natural Sciences, Tampere University, Tampere, Finland
    Piie KONNUNAHO, Faculty of Engineering and Natural Sciences, Tampere University, Tampere, Finland
    Erkki LEVÄNEN, Faculty of Engineering and Natural Sciences, Tampere University, Tampere, Finland

    person_pinNonna NURMI, Faculty of Engineering and Natural Sciences, Tampere University, Tampere, Finland
    16:00 - 16:15 | Effect of the acid corrosion surface modification on 3Y-TZP zirconia ceramics for dental applicationsAleksandra NOWICKA, FunGlass, A. Dubcek University of Trencin, Trencin, Slovakia
    Helen REVERON, Université de Lyon, INSA-Lyon, MATEIS, Lyon, France
    Jaroslava MICHÁLKOVÁ, FunGlass, A. Dubcek University of Trencin, Trencin, Slovakia
    Dagmar GALUSKOVÁ, FunGlass, A. Dubcek University of Trencin, Trencin, Slovakia
    DušAn GALUSEK,

    person_pinAleksandra NOWICKA, FunGlass, A. Dubcek University of Trencin, Trencin, Slovakia
    HL17:00 - 17:30 | Cultural Heritage analysis using Synchrotron Radiation: case studies in Ceramics, Glasses, and Lithologic MaterialsJ. P VEIGA,
    M. L COUTINHO,
    E. FIGUEIREDO,
    T. P SILVA, LNEG — Laboratório Nacional de Energia e Geologia, I.P., Unidade de Recursos Minerais e Geofísica

    person_pinJ. P VEIGA, Centro de Investigação de Materiais, FCT NOVA, Portugal; Department of Conservation and Restoration, FCT NOVA, portugal; Vidro e Cerâmica para as Artes (VICARTE), Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, Portugal
    17:30 - 17:45 | Performance comparison of sol-gel coatings and an innovative plasma treatment for ancient glass protectionStefano CENTENARO,
    Giulia FRANCESCHIN, Center for Cultural Heritage Technology (CCHT), Istituto Italiano di Tecnologia (IIT), via Torino 155, 30170, Venezia Mestre, Italy
    Elti CATTARUZZA, Dipartimento di Scienze Molecolari e Nanosistemi (DSMN), Università Ca' Foscari Venezia, via Torino 155, 30170, Venezia Mestre, Italy
    Arianna TRAVIGLIA, Center for Cultural Heritage Technology (CCHT), Istituto Italiano di Tecnologia (IIT), via Torino 155, 30170, Venezia Mestre, Italy

    person_pinStefano CENTENARO, Dipartimento di Scienze Molecolari e Nanosistemi (DSMN), Università Ca' Foscari Venezia, via Torino 155, 30170, Venezia Mestre, Italy; Center for Cultural Heritage Technology (CCHT), Istituto Italiano di Tecnologia (IIT), via Torino 155, 30170, Venezia Mestre, Italy
    17:45 - 18:00 | Effect of rinsing and zinc salt spraying treatment to protect unstable ancient glasses against a humid atmosphere Thalie LAW, PCMTH, PSL University, Chimie Paristech, CNRS, Institut de Recherche de Chimie Paris, Centre de Recherche et de Restauration des Musées de France, Paris, France, Paris, France
    Anna PICCOLO, PCMTH, PSL University, Chimie Paristech, CNRS, Institut de Recherche de Chimie Paris, Centre de Recherche et de Restauration des Musées de France, Paris, France, Paris, France
    Odile MAJÉRUS, PCMTH, PSL University, Chimie Paristech, CNRS, Institut de Recherche de Chimie Paris, Centre de Recherche et de Restauration des Musées de France, Paris, France, Paris, France
    Daniel CAURANT, PCMTH, PSL University, Chimie Paristech, CNRS, Institut de Recherche de Chimie Paris, Centre de Recherche et de Restauration des Musées de France, Paris, France, Paris, France
    Marie GODET, PCMTH, PSL University, Chimie Paristech, CNRS, Institut de Recherche de Chimie Paris, Centre de Recherche et de Restauration des Musées de France, Paris, France, Paris, France
    Antoine SEYEUX, PCS, PSL University, Chimie Paristech, CNRS, Institut de Recherche de Chimie Paris, Paris, France, Paris, France
    Thibault CHARPENTIER, Université Paris-Saclay, CEA, CNRS, NIMBE, 91191 Gif-sur-Yvette cedex, France, Saclay, France

    person_pinThalie LAW, PCMTH, PSL University, Chimie Paristech, CNRS, Institut de Recherche de Chimie Paris, Centre de Recherche et de Restauration des Musées de France, Paris, France, Paris, France
    18:00 - 18:15 | Glassy sol-gel chemical sensors applied for monitoring museums environmentsJavier DÍAZ, Instituto de Historia, CSIC. Calle Albasanz, 26-28. 28037 Madrid (Spain), MADRID, Spain
    Ana M. VILLA-MANSO, Instituto de Historia, CSIC. Calle Albasanz, 26-28. 28037 Madrid (Spain), MADRID, Spain
    Fernando AGUA, Instituto de Historia, CSIC. Calle Albasanz, 26-28. 28037 Madrid (Spain), MADRID, Spain
    Manuel GARCÍA-HERAS, Instituto de Historia, CSIC. Calle Albasanz, 26-28. 28037 Madrid (Spain), MADRID, Spain
    María Ángeles VILLEGAS, Instituto de Historia, CSIC. Calle Albasanz, 26-28. 28037 Madrid (Spain), MADRID, Spain

    person_pinJavier DÍAZ, Instituto de Historia, CSIC. Calle Albasanz, 26-28. 28037 Madrid (Spain), MADRID, Spain
    HL17:00 - 17:30 | The in vitro and hydraulic properties of α-tricalcium phosphate powders are affected by minute amounts of calcium pyrophosphateNicola DÖBELIN, RMS Foundation, Bettlach, Switzerland
    Marc BOHNER, RMS Foundation, Bettlach, Switzerland

    person_pinNicola DÖBELIN, RMS Foundation, Bettlach, Switzerland
    17:30 - 17:45 | Sintered dental inserts based on ion-doped hydroxyapatite as dentin substitutesTamara MATIC, Innovation Center of the Faculty of Technology and Metallurgy Ltd, Belgrade, Serbia
    Maja LEZAJA ZEBIC, University of Belgrade, School of Dental Medicine, Belgrade, Serbia
    Vesna MILETIC, The University of Sydney, Faculty of Medicine and Health, Sydney Dental School, Surry Hills NSW, Australia
    Djordje JANACKOVIC, University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia
    Djordje VELJOVIC, University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia

    person_pinTamara MATIC, Innovation Center of the Faculty of Technology and Metallurgy Ltd, Belgrade, Serbia
    17:45 - 18:00 | Glass-ceramics with zirconia in silica matrix for dental applicationsWei XIA, Uppsala University, Uppsala, Sweden
    Huasi ZHOU, Uppsala University, Uppsala, Sweden
    Le FU, Central South University, Changsha, China
    Lena KLINTBERG, Uppsala University, Uppsala, Sweden
    Håkan ENGQVIST, Uppsala University, Uppsala, Sweden

    person_pinWei XIA, Uppsala University, Uppsala, Sweden
    18:00 - 18:15 | Effect of abrasives on the protein adsorption and the development of new abrasive media for next generation of ZrO2 restorations  Muhammad Naeem IQBAL, Stockholm University, Dept. Materials and Environmental Chemistry, Stockholm, Sweden
    Mirva ERIKSSON, Stockholm University, Dept. Materials and Environmental Chemistry, Stockholm, Sweden
    Dianne GAN, University of Washington, Department of Restorative Dentistry, School of Dentistry, Seattle, Wash, United States
    Kwok-Hung CHUNG, University of Washington, Department of Restorative Dentistry, School of Dentistry, Seattle, Wash, United States
    Zhijian SHEN, Stockholm University, Dept. Materials and Environmental Chemistry, Stockholm, Sweden

    person_pinMirva ERIKSSON, Stockholm University, Dept. Materials and Environmental Chemistry, Stockholm, Sweden
    18:15 - 18:30 | Surface topographical modification of dental zirconia: influence on cell and bacteria responseNerea GARCIA-DE-ALBENIZ,
    Aisha AMHED, Functional Materials, Saarland University, Saarbrücken, Germany
    Müller DANIEL, Functional Materials, Saarland University, Saarbrücken, Germany
    Mücklich FRANK, Functional Materials, Saarland University, Saarbrücken, Germany
    Jimenez-Piqué EMILIO, Center for Structural Integrity, Reliability and Micromechanics of Materials (CIEFMA), Department of Materials Science and Engineering, Universitat Politècnica de Catalunya, Barcelona, Spain
    Mas-Moruno CARLES, Biomaterials, Biomechanics and Tissue Engineering Group (BBT), Department of Materials Science and Engineering, Universitat Politècnica de Catalunya, Barcelona, Spain

    person_pinNerea GARCIA-DE-ALBENIZ, Center for Structural Integrity, Reliability and Micromechanics of Materials (CIEFMA), Department of Materials Science and Engineering, Universitat Politècnica de Catalunya, Barcelona, Spain; Biomaterials, Biomechanics and Tissue Engineering Group (BBT), Department of Materials Science and Engineering, Universitat Politècnica de Catalunya, Barcelona, Spain
    18:30 - 18:45 | Ion-Exchangeable Nepheline Glass-Ceramics for Dental Application.Ali ALZAHRANI, Department of Basic Oral Medicine and Allied Dental Sciences, College of Dentistry, Taif University., Taif, Saudi Arabia

    person_pinAli ALZAHRANI, Department of Basic Oral Medicine and Allied Dental Sciences, College of Dentistry, Taif University., Taif, Saudi Arabia
    18:45 - 19:00 | Preparation, Microstructures, Mechanical and Biological Properties of High-performance Nano-ZrO2-Al2O3 Composite CeramicsNan LI, Peking University School of Stomatology, Beijing, China
    Jianmin HAN, Peking University School of Stomatology, Beijing, China

    person_pinNan LI, Peking University School of Stomatology, Beijing, China
    HL14:00 - 14:30 | FunGlass: Where making research is funDusan GALUSEK, Centre for functional and surface-functionalized glass, Trencin, Slovakia

    person_pinDusan GALUSEK, Centre for functional and surface-functionalized glass, Trencin, Slovakia
    HL14:30 - 15:00 | Ultrasound-induced mechanoluminescence and thermo-acoustic heating using multi-responsive glasses, ceramics and glass ceramicsLothar WONDRACZEK, University of Jena, Jena, Germany

    person_pinLothar WONDRACZEK, University of Jena, Jena, Germany
    15:00 - 15:15 | TiO2 Nanorods on Glass MicrospheresOrhan SISMAN, FunGlass-Center for Functional and Surface functionalized Glasses, Alexander Dubček University of Trenčín, Trenčín , Slovakia
    Haritha HARIDASAN, FunGlass-Center for Functional and Surface functionalized Glasses, Alexander Dubček University of Trenčín, Trenčín , Slovakia
    Roman SAJZEW, Otto Schott Institute of Materials Research, Friedrich Schiller University Jena, Jena, Germany
    Jozef KRAXNER, FunGlass-Center for Functional and Surface functionalized Glasses, Alexander Dubček University of Trenčín, Trenčín , Slovakia
    Mokhtar MAHMOUD, FunGlass-Center for Functional and Surface functionalized Glasses, Alexander Dubček University of Trenčín, Trenčín , Slovakia
    Jose VELAZQUEZ, FunGlass-Center for Functional and Surface functionalized Glasses, Alexander Dubček University of Trenčín, Trenčín , Slovakia
    Lothar WONDRACZEK, Otto Schott Institute of Materials Research, Friedrich Schiller University Jena, Jena, Germany
    DušAn GALUSEK ,

    person_pinJose VELAZQUEZ, FunGlass-Center for Functional and Surface functionalized Glasses, Alexander Dubček University of Trenčín, Trenčín , Slovakia
    15:15 - 15:30 | YAG: Eu and YAG: Pr microspheres for high-power LED color convertersMarzieh GHADAMYARI, FUNGLASS – CENTRE FOR FUNCTIONAL AND SURFACE FUNCTIONALIZED GLASS, Trencin, Slovakia
    Gurdial BULGAN, Swiss Federal Laboratories for Materials Science and Technology (Empa), Zurich, Switzerland
    Milan PARCHOVIANSKY, FUNGLASS – CENTRE FOR FUNCTIONAL AND SURFACE FUNCTIONALIZED GLASS, Trencin, Slovakia
    Róbert KLEMENT, FUNGLASS – CENTRE FOR FUNCTIONAL AND SURFACE FUNCTIONALIZED GLASS, Trencin, Slovakia
    DušAn GALUSEK,
    Monika MICHALKOVA, Vitrum Laugaricio – Joint Glass Centre of the IIC SAS, TnU AD, FChPT STU and RONA, a.s., Trencin, Slovakia

    person_pinMarzieh GHADAMYARI, FUNGLASS – CENTRE FOR FUNCTIONAL AND SURFACE FUNCTIONALIZED GLASS, Trencin, Slovakia
    15:30 - 15:45 | Dual-emitting Ce/Eu:YAG nanophosphor for application in white LEDsBruno WOLFRUM, FunGlass, Alexander Dubcek University of Trencin, Trencin, Slovakia
    Robert KLEMENT, FunGlass, Alexander Dubcek University of Trencin, Trencin, Slovakia
    Lothar WONDRACZEK, Otto Schott Institute of Materials Research, Friedrich Schiller University Jena, Jena, Germany
    DušAn GALUSEK,

    person_pinBruno WOLFRUM, FunGlass, Alexander Dubcek University of Trencin, Trencin, Slovakia
    15:45 - 16:00 | Additives for densification of fine-grained Y2O3: from solid state to liquid phase sinteringAliasghar NAJAFZADEHKHOEE, Joint Glass Centre of the IIC SAS, TNUAD, and FChPT STU, Trenčín, Slovakia
    Ali TALIMIAN, Centre for Functional and Surface Functionalised Glass, Alexander Dubček University of Trenčín, Študentská 2, 91150 Trenčín, Slovakia, Trenčín, Slovakia
    Vladimír GIRMAN, Institute of Materials Research, Slovak Academy of Sciences, Watsonova 47, 040 01 Košice, Slovakia , Košice, Slovakia
    Rosalía POYATO, Instituto de Ciencia de Materiales de Sevilla (CSIC-US), Américo Vespucio 49, Sevilla,41092, Spain, Sevilla, Spain
    Angela GALLARDO-LÓPEZ,
    Felipe GUTIÉRREZ-MORA,
    Pavol HVIZDOŠ, Institute of Materials Research, Slovak Academy of Sciences, Watsonova 47, 040 01 Košice, Slovakia , Košice, Slovakia
    Karel MACA,
    DušAn GALUSEK,

    person_pinAliasghar NAJAFZADEHKHOEE, Joint Glass Centre of the IIC SAS, TNUAD, and FChPT STU, Trenčín, Slovakia
    HL16:30 - 17:00 | Bioactive glasses with enhanced biological activity by metal ion doping    Aldo BOCCACCINI, University of Erlangen-Nuremberg, Germany, Erlangen, Germany

    person_pinAldo BOCCACCINI, University of Erlangen-Nuremberg, Germany, Erlangen, Germany
    17:00 - 17:15 | Mesoporous Cu-Sr/Mg calcium-silicate glass and its potential for acute/chronic infection healingDagmar GALUSKOVÁ, Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín , Trenčín, Slovakia
    Hana KANKOVÁ, Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín , Trenčín, Slovakia
    Lenka BUNOVÁ, Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín , Trenčín, Slovakia
    Akrity ANAND, Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín , Trenčín, Slovakia
    Zuzana NESCÁKOVÁ, Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín , Trenčín, Slovakia
    Aldo Roberto BOCCACCINI, Institute of Biomaterials, University of Erlangen-Nuremberg, Erlangen, Germany
    DušAn GALUSEK,

    person_pinDagmar GALUSKOVÁ, Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín , Trenčín, Slovakia
    17:15 - 17:30 | Boron and Cobalt co-doped silicate-based bioactive glass scaffolds fabrication via DLP: Optimization of the printing parametersE. VARLIK,
    S. NARAYANASAMY, Laboratory for High Performance Ceramics, Empa, Swiss Federal Laboratories for Materials Science and Technology, 8600, Dübendorf, Switzerland
    F. CLEMENS, Laboratory for High Performance Ceramics, Empa, Swiss Federal Laboratories for Materials Science and Technology, 8600, Dübendorf, Switzerland
    A. HADIAN, Laboratory for High Performance Ceramics, Empa, Swiss Federal Laboratories for Materials Science and Technology, 8600, Dübendorf, Switzerland
    D. KOMISSARENKO, Laboratory for High Performance Ceramics, Empa, Swiss Federal Laboratories for Materials Science and Technology, 8600, Dübendorf, Switzerland
    N. S. YÜZBASI, Laboratory for High Performance Ceramics, Empa, Swiss Federal Laboratories for Materials Science and Technology, 8600, Dübendorf, Switzerland
    F. KURTULDU, Centre for Functional and Surface Functionalized Glass FunGlass, A. Dubček University of Trenčín, Študentská 2, 911 50, Trenčín, Slovakia
    S. CHEN, Centre for Functional and Surface Functionalized Glass FunGlass, A. Dubček University of Trenčín, Študentská 2, 911 50, Trenčín, Slovakia
    D. GALUSEK,
    G. BLUGAN, Laboratory for High Performance Ceramics, Empa, Swiss Federal Laboratories for Materials Science and Technology, 8600, Dübendorf, Switzerland
    M. MICHÁLEK, Laboratory for High Performance Ceramics, Empa, Swiss Federal Laboratories for Materials Science and Technology, 8600, Dübendorf, Switzerland

    person_pinE. VARLIK, Centre for Functional and Surface Functionalized Glass FunGlass, A. Dubček University of Trenčín, Študentská 2, 911 50, Trenčín, Slovakia; Laboratory for High Performance Ceramics, Empa, Swiss Federal Laboratories for Materials Science and Technology, 8600, Dübendorf, Switzerland
    17:30 - 17:45 | Dynamic test as a method of choice for determination of the burst release of Zn from zinc doped bioactive glassesHana KANKOVÁ, Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Trenčín, Slovakia
    Lenka BUNOVÁ, Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Trenčín, Slovakia
    Zuzana NESCÁKOVÁ, Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Trenčín, Slovakia
    Martin MICHÁLEK, Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Trenčín, Slovakia
    DušAn GALUSEK,
    Dagmar GALUSKOVÁ, Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Trenčín, Slovakia

    person_pinHana KANKOVÁ, Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Trenčín, Slovakia
    17:45 - 18:00 | Development and Characterisation of Radiopaque Bismuth Containing Bioactive Glasses Germán CLAVIJO, Centre for Functional and Surface Functionalized Glass FunGlass, A. Dubček University of Trenčín, Študentská 2, 911 50 Trenčín, Slovakia, Trenčín, Slovakia
    Martin MICHÁLEK, Centre for Functional and Surface Functionalized Glass FunGlass, A. Dubček University of Trenčín, Študentská 2, 911 50 Trenčín, Slovakia, Trenčín, Slovakia
    DušAn GALUSEK ,
    Irem ÜNALAN, Institute of Biomaterials, Department of Material Science and Engineering, University of Erlangen-Nuremberg, 91058 Erlangen, Germany, Erlangen , Germany
    Aldo BOCCACCINI , Institute of Biomaterials, Department of Material Science and Engineering, University of Erlangen-Nuremberg, 91058 Erlangen, Germany, Erlangen , Germany

    person_pinGermán CLAVIJO, Centre for Functional and Surface Functionalized Glass FunGlass, A. Dubček University of Trenčín, Študentská 2, 911 50 Trenčín, Slovakia, Trenčín, Slovakia
    HL08:30 - 09:00 | Attack of Fine Glass Powders by Engineered Basic Solutions: from Shaping to Functionalization of Glasses and Glass-CeramicsEnrico BERNARDO, Department of Industrial Engineering, University of Padova, Padova, Italy
    Hamada ELSAYED, Department of Industrial Engineering, University of Padova, Padova, Italy
    Jozef KRAXNER, FunGlass - Centre for Functional and Surface Functionalized Glass, Alexander Dubcek University of Trenčín, Slovakia, Trenčín, Slovakia

    person_pinEnrico BERNARDO, Department of Industrial Engineering, University of Padova, Padova, Italy
    09:00 - 09:15 | Design methods and tools for ceramics Additive Manufacturing of lattice structures: an overviewLuca GRIGOLATO,
    Arish DASAN, Centre for Functional and Surface-Functionalized Glass, Alexander Dubček University of Trenčín, Trenčín, Slovakia
    Hamada ELSAYED,
    Gianpaolo SAVIO, Department of Civil, Environmental and Architectural Engineering (ICEA), University of Padova, Padova, Italy
    Enrico BERNARDO, Department of Industrial Engineering, University of Padova, Padova, Italy

    person_pinLuca GRIGOLATO, Department of Industrial Engineering, University of Padova, Padova, Italy; Department of Civil, Environmental and Architectural Engineering (ICEA), University of Padova, Padova, Italy
    09:15 - 09:30 | 3D Printing of Wollastonite-Diopside Glass-Ceramics from Silica Defective Glass Powders and Reactive Silicone BinderHamada ELSAYED,
    Franco Matías STABILE ,
    Paulina OZÓG, FunGlass – Centre for Functional and Surface Functionalized Glass, Alexander Dubcek University of Trencín, Trencín, Slovakia
    Jozef KRAXNER, FunGlass – Centre for Functional and Surface Functionalized Glass, Alexander Dubcek University of Trencín, Trencín, Slovakia
    DušAn GALUSEK,
    Enrico BERNARDO, Department of Industrial Engineering, University of Padova , Padova, Italy

    person_pinHamada ELSAYED, Department of Industrial Engineering, University of Padova , Padova, Italy; Refractories, Ceramics and Building materials Department, National Research Centre, Cairo, Egypt
    09:30 - 09:45 | Direct Ink Writing of 3D Titania-Glass Composite for Photocatalytic Applications  Mokhtar MAHMOUD,
    Jozef KRAXNER, FunGlass, A. Dubček University of Trenčín, Trenčín, Slovakia
    Hamada ELSAYED, Department of Industrial Engineering, University of Padova, Padova, Italy
    DušAn GALUSEK,
    Enrico BERNARDO, Department of Industrial Engineering, University of Padova, Padova, Italy

    person_pinMokhtar MAHMOUD, FunGlass, A. Dubček University of Trenčín, Trenčín, Slovakia; Department of Industrial Engineering, University of Padova, Padova, Italy; Department of Glass Research, National Research Centre, Cairo, Egypt
    09:45 - 10:00 | Functionalization of LCD Glass for the Manufacturing of Advanced 3D-printed Translucent Photocatalytic ScaffoldsElena COLUSSO, Department of Industrial Engineering, University of Padova, Padova, Italy
    Hamada ELSAYED, Department of Industrial Engineering, University of Padova, Padova, Italy
    Paulina OZÓG, Centre for Functional and Surface-Functionalized Glass, Alexander Dubček University of Trenčín, Trenčín, Slovakia
    DušAn GALUSEK, Centre for Functional and Surface-Functionalized Glass, Alexander Dubček University of Trenčín, Trenčín, Slovakia
    Enrico BERNARDO, Department of Industrial Engineering, University of Padova, Padova, Italy

    person_pinElena COLUSSO, Department of Industrial Engineering, University of Padova, Padova, Italy
    10:00 - 10:15 | Discarded Pharmaceutical Glass as a Key to Sustainable Alkali Activated Building MaterialsGiulia TAMENI, Department of Industrial Engineering, University of Padova, Padova, Italy
    Francesco CAMMELLI,
    Jozef KRAXNER, FunGlass - Centre for Functional and Surface Functionalized Glass, Alexander Dubcek University of Trenčín, Slovakia, Trencin, Slovakia
    Daniel DAWSON, School of Chemistry and Centre of Magnetic Resonance, University of St Andrews, UK, St Andrews, United Kingdom
    Sharon ASHBROOK, School of Chemistry and Centre of Magnetic Resonance, University of St Andrews, UK, St Andrews, United Kingdom
    Enrico BERNARDO,

    person_pinGiulia TAMENI, Department of Industrial Engineering, University of Padova, Padova, Italy
    10:15 - 10:30 | Glass-based inorganic membranes for copper adsorption from wastewaterDiana LAGO, FunGlass – Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Študentská 2, 911 50, Trenčín, Slovakia
    Jozef KRAXNER, FunGlass – Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Študentská 2, 911 50, Trenčín, Slovakia
    DušAn GALUSEK, Joint Glass Centre of the IIC SAS, TnUAD and FChFT STU, 911 50, Trenčín, Slovakia
    Enrico BERNARDO, Department of Industrial Engineering, University of Padova, Via Marzolo 9, Padova, 35131, Padova, Italy

    person_pinDiana LAGO, FunGlass – Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Študentská 2, 911 50, Trenčín, Slovakia
    HL11:00 - 11:30 | A summary of CSIC- FUNGLASS collaboration on sol-gel coatingsAlicia DURAN, Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain
    Yolanda CASTRO, Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain

    person_pinAlicia DURAN, Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain
    11:30 - 11:45 | A smart integrated active anticorrosion system based on PEO process and cerium/silica sol-gel coatings on AZ31B Mg alloyEmilia MERINO, Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain
    Alicia DURÁN, Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain
    Yolanda CASTRO , Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain

    person_pinYolanda CASTRO , Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain
    11:45 - 12:00 | Plasma electrolytic oxide coatings on AZ31B alloy: impact of electrolyte composition on electrochemical and biological propertiesAshokraja CHANDRASEKAR, FunGlass – Centre for Functional and Surface Functionalized Glass Alexander Dubček University of Trenčín, Trenčín, Slovakia
    Emilia MERINO, Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain
    Amirhossein PAKSERESHT, FunGlass – Centre for Functional and Surface Functionalized Glass Alexander Dubček University of Trenčín, Trenčín, Slovakia
    DušAn GALUSEK,
    Alicia DURAN, Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain
    Yolanda CASTRO, Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain

    person_pinAshokraja CHANDRASEKAR, FunGlass – Centre for Functional and Surface Functionalized Glass Alexander Dubček University of Trenčín, Trenčín, Slovakia
    12:00 - 12:15 | Photodegradation of methyl orange using Ag nanoparticle doped ZnO thin films prepared by solgel dip coating method?Haritha AJITHA HARIDASAN, FunGlass – Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Trencin, Slovakia
    Alicia DURAN, Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain
    DušAn GALUSEK,
    José JOAQUÍN VELÁZQUEZ, FunGlass – Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Trencin, Slovakia
    Yolanda CASTRO, Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain

    person_pinHaritha AJITHA HARIDASAN, FunGlass – Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Trencin, Slovakia
    12:15 - 12:30 | Strengthening of transparent glass-ceramics: effects of glass composition and crystallizationAli TALIMIAN, Centre for Functional and Surface Functionalised Glass, Alexander Dubček University of Trenčín, Študentská 2, Trencin, Slovakia
    Dusan GALUSEK ,

    person_pinAli TALIMIAN, Centre for Functional and Surface Functionalised Glass, Alexander Dubček University of Trenčín, Študentská 2, Trencin, Slovakia
    S13-P269 - Method optimisation for the analysis of ancient glass using laser ablation inductively couple plasma mass spectrometryLiam RICHARDS, UCL Institute of Archaeology, London, United Kingdom
    Michael CHARLTON, UCL Institute of Archaeology, London, United Kingdom

    person_pinLiam RICHARDS, UCL Institute of Archaeology, London, United Kingdom
    S13-P271 - Ceramics in Slovenia after the Collapse of the Ceramics Industry  Kristina RUTAR, University of Ljubljana, Academy of Fine Art and Design, Ljubljana, Slovenia

    person_pinKristina RUTAR, University of Ljubljana, Academy of Fine Art and Design, Ljubljana, Slovenia
    S15-P275 - NOMAD: Novel biomaterials to prevent dental peri-implant infectionsAnnabel BRAEM, KU Leuven, Leuven, Belgium
    Merve KÜBRA AKTAN, KU Leuven, Leuven, Belgium
    Jozef VLEUGELS, KU Leuven, Leuven, Belgium
    Bart VAN MEERBEEK, KU Leuven, Leuven, Belgium
    Wim TEUGHELS, KU Leuven, Leuven, Belgium
    Karin THEVISSEN, KU Leuven, Leuven, Belgium
    Isabelle FRANÇOIS, Health House, Leuven, Belgium
    Laurent GREMILLARD, Centre National de la Recherche Scientifique Lyon, Lyon, France
    Yann CHEVOLOT, Ecole Centrale de Lyon, Lyon, France
    Emmanuelle LAURENCEAU, Ecole Centrale de Lyon, Lyon, France
    Mariano SANZ, Universidad Complutense de Madrid, Madrid, Spain
    Ariana BARLIC, Educell d.o.o., Ljubljana, Slovenia
    Nestor RODRIGUEZ, Atrineo AG, Karlsruhe, Germany
    Henny VAN DER MEI, University Medical Center Groningen, Groningen, Netherlands
    Nicolas COURTOIS, Anthogyr SAS, Sallanches, France
    John HANRAHAN, Glantreo Ltd, Cork, Ireland
    Melissa COURTNEY, Glantreo Ltd, Cork, Ireland
    Shane KEAVENEY, Croom Precision Tooling Ltd, Limerick, Ireland
    Manuela Sonja KILLIAN, Universität Siegen, Siegen, Germany

    person_pinJozef VLEUGELS, KU Leuven, Leuven, Belgium
    S15-P276 - Bio-mechanical properties of polymer/ceramic 3D-printed scaffolds for periodontal regenerationAlessandro MOSCA BALMA, Department of Surgical Sciences, C.I.R. Dental School, Università di Torino, Torino, Italy
    Mattia DI MARO, Institute of Sciences and Technologies for Sustainable Energy and Mobility, National Council of Research, Torino, Italy
    Donatella DURACCIO, Institute of Sciences and Technologies for Sustainable Energy and Mobility, National Council of Research, Torino, Italy
    Maria Giulia FAGA, Institute of Sciences and Technologies for Sustainable Energy and Mobility, National Council of Research, Torino, Italy
    Giulio MALUCELLI, Department of Applied Science and Technology, Politecnico di Torino, and local INSTM Unit, Alessandria, Italy
    Riccardo PEDRAZA, Department of Surgical Sciences, C.I.R. Dental School, Università di Torino, Torino, Italy
    Ilaria ROATO, Department of Surgical Sciences, C.I.R. Dental School, Università di Torino, Torino, Italy
    Federico MUSSANO, Department of Surgical Sciences, C.I.R. Dental School, Università di Torino, Torino, Italy

    person_pinAlessandro MOSCA BALMA, Department of Surgical Sciences, C.I.R. Dental School, Università di Torino, Torino, Italy
    S15-P277 - Preliminary study of bovine-derived bone filler in bioresorbable polymeric 3D-printed scaffold for maxillary bone regenerationRiccardo PEDRAZA, Department of Surgical Science, C.I.R. Dental School, Università di Torino, Torino, Italy
    Mattia DI MARO, Institute of Sciences and Technologies for Sustainable Energy and Mobility, National Council of Research, Torino, Italy
    Maria Giulia FAGA, Institute of Sciences and Technologies for Sustainable Energy and Mobility, National Council of Research, Torino, Italy
    Donatella DURACCIO, Institute of Sciences and Technologies for Sustainable Energy and Mobility, National Council of Research, Torino, Italy
    Giulio MALUCELLI, Department of Applied Science and Technology, Politecnico di Torino, and local INSTM Unit, Alessandria, Italy
    Alessandro MOSCA BALMA, Department of Surgical Science, C.I.R. Dental School, Università di Torino, Torino, Italy
    Ilaria ROATO, Department of Surgical Science, C.I.R. Dental School, Università di Torino, Torino, Italy
    Federico MUSSANO, Department of Surgical Science, C.I.R. Dental School, Università di Torino, Torino, Italy

    person_pinRiccardo PEDRAZA, Department of Surgical Science, C.I.R. Dental School, Università di Torino, Torino, Italy
    S15-P278 - A fluorescent zirconia for dental useMeng XUE, Liaoning, Benxi, China

    person_pinMeng XUE, Liaoning, Benxi, China
    S15-P279 - A multilayer dental material and its preparation methodShi FENG, Liaoning province, Benxi, China

    person_pinShi FENG, Liaoning province, Benxi, China
  • EVENT PLANNER - Registration CONTACT
    INSIGHT OUTSIDE
    26, avenue Jean Kuntzmann - 38330 Montbonnot, France
    Tel: +33 825 595 525 (0,15€/min*)
    Information desk: Monday to Friday from 9:00 to 12:00 and 14:00 to 17:00
    OrganiSation
    European Ceramic Society
    Groupe Français de Céramique
    MATEIS (INSA Lyon, Université Lyon 1, CNRS)
    (*) Prices starting from fixed line incumbent, a surcharge may be applied by operators, counting the second after the first 45 seconds.

    According to France's Personal Data Privacy Act in effect since June 2004, you may send a request in writing to INSIGHT OUTSIDE 26 avenue Jean Kuntzmann - Montbonnot-Saint-Martin 38330 / France, or by email webmaster@insight-outside.fr to access your file in order to consult, modify and/or delete your personal information.

    ECerS 2023 logo and graphic design: SuperNova Design - ECerS 2023 photo : Frédéric Prochasson
    © Photos : Cité Internationale - Nicolas Robin, Joël Philippon, Nicolas Rodet, Studio Fly, Only Lyon - ww.b-rob.com, Frédéric Prochasson.


    © 2005 - 2024 Insight Outside