•  

    Full conference program

  • LEgend
    •  S1
    •  S2
    •  S3
    •  S4
    •  S5
    •  S6
    •  S7
    •  S8
    •  S9
    •  S10
    •  S11
    •  S12
    •  SS13
    •  SS14
    •  SS15
    •  SS16
    •  Plenary / Keynote / Highlight 
    •  Scientific Event / Social Event
    • Posters
    • Speaker
  • The search engine will allow you to find speakers, authors, session titles, abstract titles.
    You can use the "Symposia" filter and the search engine to narrow your program research.
     

    calendar_today SUN. 02/07

    14:30 - 14:50 | Sintered dental inserts based on ion-doped hydroxyapatite as dentin substitutesTamara MATIC, Innovation Center of the Faculty of Technology and Metallurgy Ltd, Belgrade, Serbia

    person_pinTamara MATIC, Innovation Center of the Faculty of Technology and Metallurgy Ltd, Belgrade, Serbia
    14:50 - 15:10 | Preclinical evaluation of antibacterial zinc-doped hydroxyapatite nanoparticles for treatment of bone infectionsLizzy CUYPERS, Radboudumc Dentistry, The Netherlands

    person_pinLizzy CUYPERS, Radboudumc Dentistry, The Netherlands
    15:10 - 15:30 | Development of Yttrium-Doped BaTiO3 for Next-Generation Multilayer Ceramic CapacitorsMohammed TIHTIH, Institute of Ceramic and Polymer Engineering/University of Miskolc, Hungary

    person_pinMohammed TIHTIH, Institute of Ceramic and Polymer Engineering/University of Miskolc, Hungary
    15:30 - 15:50 | Biophotonic glass-based scaffolds for drug releaseSonya GHANAVATI, Faculty of Medicine and Health Technology, Tampere University, Korkeakoulunkatu 3, Tampere, Finland
    Evellyn SANTOS MAGALHAES, Photonics Laboratory, Tampere University, Korkeakoulunkatu 3, Tampere 33720, Finland
    Chi NGUYEN, Photonics Laboratory, Tampere University, Korkeakoulunkatu 3, Tampere 33720, Finland
    Bartosz BONDZIOR,
    Mika LASTUSAARI, Department of Chemistry, University of Turku, FI-20014, Turku, Finland
    Jeffrey N ANKER, Department of Chemistry, Clemson University, Clemson, SC, United States
    Andrew DRAGANSKI , Zylö Therapeutics, Greenville, SC, United States
    Laeticia PETIT, Photonics Laboratory, Tampere University, Korkeakoulunkatu 3, Tampere 33720, Finland
    Jonathan MASSERA, Faculty of Medicine and Health Technology, Tampere University, Korkeakoulunkatu 3, Tampere, Finland

    person_pinSonya GHANAVATI, Faculty of Medicine and Health Technology, Tampere University, Korkeakoulunkatu 3, Tampere, Finland
    15:50 - 16:10 | Octacalcium phosphate: journey of creating a unique drug delivery vehicleIiijana KOVRLIJA, Riga Technical University, Latvia

    person_pinIiijana KOVRLIJA, Riga Technical University, Latvia
    16:10 - 16:30 | Porous bioceramic scaffolds prepared by supercritically dried sol-gel derived calcium phosphatesFloren RADOVANOVIC-PERIC, University of Zagreb Faculty of Chemical Engineering and Technology, Zagreb, Croatia

    person_pinFloren RADOVANOVIC-PERIC, University of Zagreb Faculty of Chemical Engineering and Technology, Zagreb, Croatia
    17:00 - 17:20 | Optimization of magnetite synthesis processes for biomedical applicationsCristina CHIRCOV, University Politehnica of Bucharest , Croatia

    person_pinCristina CHIRCOV, University Politehnica of Bucharest , Croatia
    17:20 - 17:40 | How to protect human life? Unconventional use of ceramic-polymer smart materialsRadoslaw ZUROWSKI, Warsaw University of Technology, Faculty of Chemistry, Poland

    person_pinRadoslaw ZUROWSKI, Warsaw University of Technology, Faculty of Chemistry, Poland
    17:40 - 18:00 | Oxyfluoride glass-ceramics prepared by a novel sol-gel route for photonic applicationsMaria Eugenia CRUZ, Instituto de Cerámica y Vidrio (ICV-CSIC), Spain

    person_pinMaria Eugenia CRUZ, Instituto de Cerámica y Vidrio (ICV-CSIC), Spain
    18:00 - 18:20 | Formulation and modeling of the shaping of SiC refractory tiles for waste-to-energy facilitiesAudrey TIXIER, Mines Saint-Étienne and CEMHTI, FRANCE

    person_pinAudrey TIXIER, Mines Saint-Étienne and CEMHTI, FRANCE

    calendar_today MON. 03/07

    P08:30 - 08:50 | Welcome & IntroductionJérôme CHEVALIER, Chairman ECerS 2023
    Anne LERICHE, Co-Chair ECerS 2023
    Helen REVERON, Scientific Chair ECerS 2023
    Francis CAMBIER, President European Ceramic Society
    Jacques POIRIER, President French Ceramic Society

    person_pinJérôme CHEVALIER, Chairman ECerS 2023
    Anne LERICHE, Co-Chair ECerS 2023
    Helen REVERON, Scientific Chair ECerS 2023
    Francis CAMBIER, President European Ceramic Society
    Jacques POIRIER, President French Ceramic Society
    P08:50 - 09:20 | Ceramic as key enabler for sustainabilityYves BOUSSANT-ROUX, R&D Vice-President Ceramic Materials, Saint-Gobain Innovative Materials, France

    person_pinYves BOUSSANT-ROUX, R&D Vice-President Ceramic Materials, Saint-Gobain Innovative Materials, France
    P09:20 - 09:50 | Smart Factory: vision of the future ceramic industryRichard GAIGNON, CEO, 3DCeram, France

    person_pinRichard GAIGNON, CEO, 3DCeram, France
    P09:50 - 10:20 | ZPTA ceramic bearing surfaces as a preferred choice in joint arthroplasty?Alessandro Alan PORPORATI,

    person_pinAlessandro Alan PORPORATI, CeramTec GmbH, Germany; University of Trieste, Italy
    P10:20 - 10:30 | Industry, Education, Research: A winning trio in France in the field of ceramicsRichard GAIGNON, on behalf of the Confederation of Ceramic Industries of France (CICF)

    person_pinRichard GAIGNON, on behalf of the Confederation of Ceramic Industries of France (CICF)
    11:00 - 11:20 | Understanding the cold sintering process of ceramicsAbdullah JABR, Montanuniversität Leoben, Austria

    person_pinAbdullah JABR, Montanuniversität Leoben, Austria
    11:20 - 11:40 | Effect of molecular weight and concentration of dispersants on the slip characteristics, 3D printing and sintered bodies of hydroxyapatiteAshley DAVIDSON, Technological University Dublin, Ireland

    person_pinAshley DAVIDSON, Technological University Dublin, Ireland
    11:40 - 12:00 | Voltage-driven atomic level response of ferroelectric domain wallsOana-Andreea CONDURACHE, Jozef Stefan Institute, slovenia

    person_pinOana-Andreea CONDURACHE, Jozef Stefan Institute, slovenia
    12:00 - 12:20 | Co – Extrusion of Alumina Core – Shell Structures Fabricated by RobocastingMichelle WEICHELT, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany

    person_pinMichelle WEICHELT, Friedrich-Alexander-Universität Erlangen-Nürnberg, Germany
    12:20 - 12:40 | Improvement of the Performance of Silicon-Graphite Anodes by Ultrathin Atomic Layer Deposited ZnO FilmsAlper GUNEREN, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Slovak Republic

    person_pinAlper GUNEREN, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Slovak Republic
    12:40 - 13:00 | Optimization of Direct Ink Writing Parameters and Post Processing to Produce High-Density Monolithic Alumina Toughened Zirconia PartsBerfu GOKSEL, KU Leuven - Department Materials Engineering , Belgium

    person_pinBerfu GOKSEL, KU Leuven - Department Materials Engineering , Belgium
    K11:00 - 11:30 | Synthesis of Advanced Multicomponent Nitride-Based Ceramics from Single-Source PrecursorsRalf RIEDEL, Institute of Materials Science, TU Darmstadt, Darmstadt, Germany
    Wei LI, Institute of Materials Science, TU Darmstadt, Darmstadt, Germany
    Jan BERNAUER, Institute of Materials Science, TU Darmstadt, Darmstadt, Germany
    Laura FELDMANN, Institute of Materials Science, TU Darmstadt, Darmstadt, Germany

    person_pinWei LI, Institute of Materials Science, TU Darmstadt, Darmstadt, Germany
    11:30 - 11:45 | Effect of colloidally dispersed additions of transition metals on the sintering behavior of WC compositesAntonio Javier SANCHEZ-HERENCIA, Institute for Ceramic and Glass (ICV-CSIC), Madrid, Spain
    Hoseein BESHARATLOO,
    Chirico CATERINA, Institute for Ceramic and Glass (ICV-CSIC), Madrid, Spain
    Begoña FERRARI, Institute for Ceramic and Glass (ICV-CSIC), Madrid, Spain

    person_pinAntonio Javier SANCHEZ-HERENCIA, Institute for Ceramic and Glass (ICV-CSIC), Madrid, Spain
    11:45 - 12:00 | Porous Si3N4-based ceramics by gelcasting forming and self-propagating high-temperature synthesis (SHS)Chang-An WANG, Tsinghua University, Beijing, China

    person_pinChang-An WANG, Tsinghua University, Beijing, China
    12:00 - 12:15 | Advances in carbide and oxycarbide derived carbons obtained from preceramic polymersM. Alejandra MAZO, Ceramics and Glass Institute, Madrid, Spain
    Mª RODRIGUEZ, University of Extremadura, Badajoz, Spain
    Fausto RUBIO, Ceramics and Glass Institute, Madrid, Spain
    Juan RUBIO, Ceramics and Glass Institute, Madrid, Spain

    person_pinM. Alejandra MAZO, Ceramics and Glass Institute, Madrid, Spain
    12:15 - 12:30 | Design, doping strategy and characterization of polymer-derived SiAlONMunni KUMARI, CNRS, Limoges, France

    person_pinMunni KUMARI, CNRS, Limoges, France
    K11:00 - 11:30 | LCM Ceramic 3D Printing: Industrial Standard or Prototyping Technology? Johannes HOMA, Lithoz GmbH, Vienna, Austria
    Martin SCHWENTENWEIN, Lithoz GmbH, Vienna, Austria

    person_pinJohannes HOMA, Lithoz GmbH, Vienna, Austria
    11:30 - 11:45 | Combination of indirect stereolithography and gel casting methods to shape ceramic dental crownsPierre GRIMAUD,
    Fabrice PETIT, BCRC (Belgian Ceramic Research Centre), Mons, Belgium
    Laurent BOILET, BCRC (Belgian Ceramic Research Centre), Mons, Belgium
    Marie LASGORCEIX, CERAMATH - DMP, Maubeuge, France
    Florian JEAN, CERAMATH - DMP, Maubeuge, France
    Anne LERICHE, CERAMATH - DMP, Maubeuge, France
    Pascal LAURENT, CERAMATH - DMP, Maubeuge, France
    Philippe CHAMPAGNE, CERAMATH - DMP, Maubeuge, France

    person_pinPierre GRIMAUD, CERAMATH - DMP, Maubeuge, France; BCRC (Belgian Ceramic Research Centre), Mons, Belgium
    11:45 - 12:00 | Formulation of alumina suspensions focused on defect-free debinding for stereolithography-based additive manufacturingPol BARCELONA, Universitat de Barcelona, Barcelona, Spain
    Jose Antonio PADILLA SÁNCHEZ,
    Mònica MARTÍNEZ LÓPEZ, Universitat de Barcelona, Barcelona, Spain
    Mercè SEGARRA, Universitat de Barcelona, Barcelona, Spain
    Elena XURIGUERA, Universitat de Barcelona, Barcelona, Spain

    person_pinPol BARCELONA, Universitat de Barcelona, Barcelona, Spain
    12:00 - 12:15 | Highly loaded Ceramic Slurries for Lithography based Ceramic ManufacturingSeema NEGI, IIT Bombay, Mumbai, India
    Parag BHARGAVA, IIT Bombay, Mumbai, India
    Prasanna S. GANDHI, IIT Bombay, Mumbai, India

    person_pinSeema NEGI, IIT Bombay, Mumbai, India
    12:15 - 12:30 | Latest advances in lithography-based additive manufacturing of non-oxide ceramics  Martin SCHWENTENWEIN, Lithoz GmbH, Vienna, Austria
    Abhijeet LALE, Lithoz GmbH, Vienna, Austria
    Thomas PROCHASKA, Lithoz GmbH, Vienna, Austria

    person_pinMartin SCHWENTENWEIN, Lithoz GmbH, Vienna, Austria
    12:30 - 12:45 | Lithography-based ceramic manufacturing of porosity graded alumina and hydroxyapatite ceramics  Serkan NOHUT,
    Irina KRALEVA, Department of Materials Science, Montanuniversitaet Leoben, Franz Josef Strasse 18, A-8700, Leoben, Austria, Leoben, Austria
    Josef SCHLACHER, Department of Materials Science, Montanuniversitaet Leoben, Franz Josef Strasse 18, A-8700, Leoben, Austria, Leoben, Austria
    Sebastian GEIER, Lithoz GmbH, Mollardgasse 85a/2/64-69, A-1060, Vienna, Austria, Vienna, Austria
    Martin SCHWENTENWEIN, Lithoz GmbH, Mollardgasse 85a/2/64-69, A-1060, Vienna, Austria, Vienna, Austria
    Raul BERMEJO, Department of Materials Science, Montanuniversitaet Leoben, Franz Josef Strasse 18, A-8700, Leoben, Austria, Leoben, Austria

    person_pinSerkan NOHUT, Lithoz GmbH, Mollardgasse 85a/2/64-69, A-1060, Vienna, Austria, Vienna, Austria; Department of Mechanical Engineering, Piri Reis University, 34940, Istanbul, Turkey, Istanbul , Turkey
    HL11:00 - 11:30 | Small scale mechanics of cemented carbides: A combined experimental and numerical approachEmilio JIMÉNEZ PIQUE, Universitat Politècnica de Catalunya, Barcelona, Spain
    Pedro SOUSA-MACHADO, Universitat Politècnica de Catalunya, Barcelona, Spain
    Laia ORTIZ-MEMBRADO, Universitat Politècnica de Catalunya, Barcelona, Spain
    Ferhun CANER, Universitat Politècnica de Catalunya, Barcelona, Spain
    Luis LLANES, Universitat Politècnica de Catalunya, Barcelona, Spain

    person_pinEmilio JIMÉNEZ PIQUE, Universitat Politècnica de Catalunya, Barcelona, Spain
    11:30 - 11:45 | High-speed nanoindentation of WC hardmetals: Extraction of  properties by statistical analysis and correlation with microstructureLaia ORTIZ MEMBRADO, Department of Materials Science and Engineering, EEBE, Universitat Politècnica de Catalunya, Barcelona, Spain
    Raul BENITEZ, Research Centre for Biomedical Engineering (CREB), EEBE, Universitat Politècnica de Catalunya, Barcelona, Spain
    Luis LLANES, Department of Materials Science and Engineering, EEBE, Universitat Politècnica de Catalunya, Barcelona, Spain
    Emilio JIMÉNEZ PIQUÉ, Department of Materials Science and Engineering, EEBE, Universitat Politècnica de Catalunya, Barcelona, Spain

    person_pinLaia ORTIZ MEMBRADO, Department of Materials Science and Engineering, EEBE, Universitat Politècnica de Catalunya, Barcelona, Spain
    11:45 - 12:00 | WC-based composites made from WC/Ti powder mixtures using HEBM-SPS as alternative for WC-Co cemented carbidesDariusz GARBIEC, Łukasiewicz Research Network – Poznań Institute of Technology, Poznan, Poland
    Jakub WISNIEWSKA, Łukasiewicz Research Network – Poznań Institute of Technology, Poznan, Poland
    Wiktoria KRZYZANIAK, Łukasiewicz Research Network – Poznań Institute of Technology, Poznan, Poland
    Grzegorz ADAMEK, Poznan University of Technology, Institute of Materials Science and Engineering, Poznan, Poland

    person_pinDariusz GARBIEC, Łukasiewicz Research Network – Poznań Institute of Technology, Poznan, Poland
    12:00 - 12:15 | Different surface integrity states by post-processing techniques applied on WC-Co cemented carbide materialGuiomar RIU PERDRIX,
    Luis Miguel LLANES PITARCH, CIEFMA - Department of Materials Science and Engineering - Universitat politécnica de Catalunya (EEBE), Barcelona, Spain
    Joan Josep ROA ROVIRA, Steros GPA Innovative SL, Barcelona, Spain

    person_pinGuiomar RIU PERDRIX, CIEFMA - Department of Materials Science and Engineering - Universitat politécnica de Catalunya (EEBE), Barcelona, Spain; Steros GPA Innovative SL, Barcelona, Spain
    12:15 - 12:30 | Surface transformation of TiC-316L cermets by boridingKevin PLUCKNETT, Dalhousie University, Halifax, Canada
    Danielle GRIFFIN, Dalhousie University, Halifax, Canada
    Ayumi KIMURA, University of Tokyo, Tokyo, Japan
    Owen CRAIG, Dalhousie University, Halifax, Canada
    M MORITA, University of Tokyo, Tokyo, Japan
    Marciel GAIER, Dalhousie University, Halifax, Canada
    Hua-Tay LIN, Guangdong University of Technology, Guangzhou, China
    Takehito SEKI, University of Tokyo, Tokyo, Japan

    person_pinKevin PLUCKNETT, Dalhousie University, Halifax, Canada
    12:30 - 12:45 | Development of UO2-Mo Composite Nuclear Fuel Pellets with Enhanced Thermal ConductivityDong Seok KIM, Korea Atomic Energy Research Institute, Daejeon, Korea (Republic of)
    Dong-Joo KIM, Korea Atomic Energy Research Institute, Daejeon, Korea (Republic of)
    Jae Ho YANG, Korea Atomic Energy Research Institute, Daejeon, Korea (Republic of)
    Heung Soo LEE, Korea Atomic Energy Research Institute, Daejeon, Korea (Republic of)
    Ji-Hae YOON, Korea Atomic Energy Research Institute, Daejeon, Korea (Republic of)
    Ji Hwan LEE, Korea Atomic Energy Research Institute, Daejeon, Korea (Republic of)

    person_pinDong Seok KIM, Korea Atomic Energy Research Institute, Daejeon, Korea (Republic of)
    12:45 - 13:00 | Interface quality of new metal-ceramic assembly co-sintered by SPS for power electronic applicationsRomain RAISSON, CIRIMAT-LGP-UPPA, Pau, France
    Sophie GUILLEMET-FRITSCH, CIRIMAT, Toulouse, France
    Pascal DUFOUR, CIRIMAT, Toulouse, France
    Paul-Etienne VIDAL, LGP, Tarbes, France
    Donatien MARTINEAU, SAFRAN TECH, Châteaufort, France
    Philippe LASSERRE, DEEP CONCEPT, PAU, France

    person_pinRomain RAISSON, CIRIMAT-LGP-UPPA, Pau, France
    K11:00 - 11:30 | Will UHTCs and composites be enabling solutions for harsh environments?Diletta SCITI, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics, Faenza, Italy
    Luca ZOLI, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics, Faenza, Italy
    Laura SILVESTRONI, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics, Faenza, Italy
    Frederic MONTEVERDE, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics, Faenza, Italy
    Pietro GALIZIA, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics, Faenza, Italy
    Simone FAILLA, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics, Faenza, Italy
    Antonio VINCI, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics, Faenza, Italy

    person_pinDiletta SCITI, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics, Faenza, Italy
    11:30 - 11:45 | Processing CMCs With Controlled and Variable Matrix CompositionVinothini VENKATACHALAM, School of Metallurgy and Materials, University of Birmingham, Birmingham, United Kingdom
    Jon BINNER, School of Metallurgy and Materials, University of Birmingham, Birmingham, United Kingdom

    person_pinVinothini VENKATACHALAM, School of Metallurgy and Materials, University of Birmingham, Birmingham, United Kingdom
    11:45 - 12:00 | Processing and characterization of UHTCMCs via water based slurry impregnation and mild polymer infiltration and pyrolysis Francesca SERVADEI, CNR-ISSMC (former ISTEC), Faenza, Italy
    Luca ZOLI, CNR-ISSMC (former ISTEC), Faenza, Italy
    Pietro GALIZIA, CNR-ISSMC (former ISTEC), Faenza, Italy
    Diletta SCITI, CNR-ISSMC (former ISTEC), Faenza, Italy

    person_pinFrancesca SERVADEI, CNR-ISSMC (former ISTEC), Faenza, Italy
    12:00 - 12:15 | Manufacturing of layered UHTCMCs using pliable, short fibre-reinforced ceramic sheetsMatteo MOR, CNR-ISSMC, Faenza, Italy
    Antonio VINCI, CNR-ISSMC, Faenza, Italy
    Simone FAILLA, CNR-ISSMC, Faenza, Italy
    Pietro GALIZIA, CNR-ISSMC, Faenza, Italy
    Luca ZOLI, CNR-ISSMC, Faenza, Italy
    Diletta SCITI, CNR-ISSMC, Faenza, Italy

    person_pinMatteo MOR, CNR-ISSMC, Faenza, Italy
    12:15 - 12:30 | Development and Adaptation of UHTCMCs via Reactive Melt Infiltration of boron and zirconium diboride containing preformsLuis BAIER, German Aerospace Center , Stuttgart, Germany
    Linda KLOPSCH, German Aerospace Center , Stuttgart, Germany

    person_pinLuis BAIER, German Aerospace Center , Stuttgart, Germany
    12:30 - 12:45 | Effects of surface roughness and atmosphere on wetting of HfB2-ZrB2 based composites using a powder-based methodShipra BAJPAI, Indian Institute of Technology Kanpur, Kanpur, India
    Kunwar Pratap SINGH , Indian Institute of Technology Kanpur, Kanpur, India
    Anish UPADHYAYA, Indian Institute of Technology Kanpur, Kanpur, India
    T. VENKATESWARAN, Vikram Sarabhai Space Centre, , Thiruvananthapuram , India
    Kantesh BALANI, Indian Institute of Technology Kanpur, Kanpur, India

    person_pinShipra BAJPAI, Indian Institute of Technology Kanpur, Kanpur, India
    12:45 - 13:00 | Structure and properties of ZrB2- and HfB2– based ultrahigh temperature ceramics sintered under high pressureTetiana PRIKHNA,
    Anastasiya LOKATKINA, V. Bakul Institute for Superhard Materials of the National Academy of Sciences of Ukraine, Avtozavodska Str., 2, Kyiv 04074, Ukraine, Kyiv, Ukraine
    Myroslav KARPETS,
    Richard HABER, Department of Materials Science and Engineering, Rutgers, The State University of New Jersey, Piscataway, NJ 08854, USA, Piscataway, United States
    Bernd BÜCHNER, Leibniz-Institut für Festkörper- und Werkstoffforschung Dresden e. V. Helmholtzstraße 20, 01069 Dresden, Germany, Dresden, Germany
    Werner JOCHEN, Leibniz-Institut für Festkörper- und Werkstoffforschung Dresden e. V. Helmholtzstraße 20, 01069 Dresden, Germany, Dresden, Germany
    Julia HUFENBACH, Leibniz-Institut für Festkörper- und Werkstoffforschung Dresden e. V. Helmholtzstraße 20, 01069 Dresden, Germany, Dresden, Germany
    Robert KLUGE, Leibniz-Institut für Festkörper- und Werkstoffforschung Dresden e. V. Helmholtzstraße 20, 01069 Dresden, Germany, Dresden, Germany
    Viktor MOSHCHIL, V. Bakul Institute for Superhard Materials of the National Academy of Sciences of Ukraine, Avtozavodska Str., 2, Kyiv 04074, Ukraine, Kyiv, Ukraine
    Pavel BARVITSKYI, V. Bakul Institute for Superhard Materials of the National Academy of Sciences of Ukraine, Avtozavodska Str., 2, Kyiv 04074, Ukraine, Kyiv, Ukraine
    Anatolii BONDAR, Frantsevich Institute for Problems of Material Sciences of the National Academy of Sciences of Ukraine, Krzhizhanovsky Str., 3, 03142 Kyiv, Ukraine, Kyiv, Ukraine
    Olexander BORIMSKYI, V. Bakul Institute for Superhard Materials of the National Academy of Sciences of Ukraine, Avtozavodska Str., 2, Kyiv 04074, Ukraine, Kyiv, Ukraine
    Leonid DEVIN, V. Bakul Institute for Superhard Materials of the National Academy of Sciences of Ukraine, Avtozavodska Str., 2, Kyiv 04074, Ukraine, Kyiv, Ukraine
    Semyon PONOMARYOV, Institute of Semiconductor Physics of the National Academy of Sciences of Ukraine , 41, Nauky Ave., 03028 Kyiv, Ukraine, Kyiv, Ukraine

    person_pinTetiana PRIKHNA, V. Bakul Institute for Superhard Materials of the National Academy of Sciences of Ukraine, Avtozavodska Str., 2, Kyiv 04074, Ukraine, Kyiv, Ukraine; Leibniz-Institut für Festkörper- und Werkstoffforschung Dresden e. V. Helmholtzstraße 20, 01069 Dresden, Germany, Dresden, Germany
    HL11:00 - 11:30 | CERAMIC WASTE RECYCLING IN THE INDUSTRY  Tiphaine BAZIN, Valoref, Bollène, France
    Thibaut CHUFFART, Valoref, Bollène, France
    Bruno DORIER, Valoref, Bollène, France

    person_pinTiphaine BAZIN, Valoref, Bollène, France
    11:30 - 11:45 | Reduction of CO2 emission in the whiteware wall tiles industrySophie CAILLIET, Imerys, Toulouse, France
    Mirella AZAR,
    Cédric POILLY, Imerys, Aixe-sur-Vienne, France
    Enrique SÁNCHEZ, Instituto de Tecnología Cerámica (ITC), Universitat Jaume I (UJI), Castellón, Spain
    Vicente SANZ, Instituto de Tecnología Cerámica (ITC), Universitat Jaume I (UJI), Castellón, Spain
    Javier CASTELLANO, Instituto de Tecnología Cerámica (ITC), Universitat Jaume I (UJI), Castellón, Spain

    person_pinMirella AZAR,
    11:45 - 12:00 | Ceramic recovery of construction and demolition waste classified by spectroscopy and chemometricsSonia MARÍN-CORTÉS, Glass and Ceramic Institute, ICV - CSIC, Kelsen 5, 29049, Madrid, Spain
    María FERNÁNDEZ-ÁLVAREZ,
    Alberto MOURE, Glass and Ceramic Institute, ICV - CSIC, Kelsen 5, 29049, Madrid, Spain
    José Francisco FERNÁNDEZ, Glass and Ceramic Institute, ICV - CSIC, Kelsen 5, 29049, Madrid, Spain
    Esther ENRÍQUEZ, Institute of Optics "Daza de Valdés“, IO - CSIC Serrano 121, 28006 , Madrid , Spain

    person_pinSonia MARÍN-CORTÉS, Glass and Ceramic Institute, ICV - CSIC, Kelsen 5, 29049, Madrid, Spain
    12:00 - 12:15 | Ceramic-based Pd catalyst-loaded catalytic converter for NRMM exhaust systemOwais AQTASH, University of Szeged, Szeged, Hungary

    person_pinOwais AQTASH, University of Szeged, Szeged, Hungary
    12:15 - 12:30 | Ba0.92Ca0.08Ti0.95Zr0.05O3  Lead-free Ceramic for Piezoelectric Energy HarvestingAna Cristina HERNÁNDEZ-MORENO,
    Armando REYES-MONTERO, Instituto de Investigaciones en Materiales-UNAM, CDMX, Mexico
    Brenda CARREÑO-JIMÉNEZ,
    Mónica ACUAUTLA, Faculty of Science and Engineering, University of Groningen, Groningen, Netherlands
    Lorena PARDO, Instituto de Ciencia de Materiales de Madrid-CSIC, Madrid, Spain

    person_pinArmando REYES-MONTERO, Instituto de Investigaciones en Materiales-UNAM, CDMX, Mexico
    12:30 - 12:45 | Carbon-Free Ammonia Combustion for Industrial Fabrication of Ceramic TilesYi-Bing CHENG, FOSHAN XIANHU LABORATORY, FOSHAN CITY, China

    person_pinYi-Bing CHENG, FOSHAN XIANHU LABORATORY, FOSHAN CITY, China
    K11:00 - 11:30 | Structural control of crystallization in sodium and alumina-rich high level nuclear waste glassesAshutosh GOEL, Rutgers, The State University of New Jersey, Piscataway, United States
    Ambar DESHKAR, Rutgers, The State University of New Jersey, Piscataway, United States
    Yingcheng ZHANG, Rutgers, The State University of New Jersey, Piscataway, United States
    Ping LU,
    Randall YOUNGMAN, Corning Incorporated, Painted Post, United States
    Pierre FLORIAN, CNRS, Orleans, France
    Gregory TRICOT, University of Lille, Lille, France
    John MCCLOY, Washington State University, Pullman, United States
    Albert KRUGER, U.S. Department of Energy, Office of River Protection, Richland, United States

    person_pinAshutosh GOEL, Rutgers, The State University of New Jersey, Piscataway, United States
    11:30 - 11:45 | 3D Mapping of Glass Indentation Stress FieldsAmanda BELLAFATTO, Colorado School of Mines, Lakewood, United States
    Ivar REIMANIS, Colorado School of Mines, Lakewood, United States

    person_pinAmanda BELLAFATTO, Colorado School of Mines, Lakewood, United States
    11:45 - 12:00 | Development of new transparent ceramics for laser applications in the 1.7 – 2.7 µm windowRenaud VALOIS, CEMHTI CNRS UPR 3079, Orléans, France
    Mathieu ALLIX, CEMHTI CNRS UPR 3079, Orléans, France
    Michael PITCHER, CEMHTI CNRS UPR 3079, Orléans, France
    Emmanuel VÉRON, CEMHTI CNRS UPR 3079, Orléans, France
    Véronique JUBERA, ICMCB CNRS UMR5026, Bordeaux, France

    person_pinRenaud VALOIS, CEMHTI CNRS UPR 3079, Orléans, France
    12:00 - 12:15 | Amorphous states of alkali phosphates obtained through high-energy ball milling: how different are they from the glassy state? Jose F. SCHNEIDER,

    person_pinJose F. SCHNEIDER, Universidade de São Paulo, São Carlos, Brazil; Center for Research, Technology and Education in Vitreous Materials, São Carlos, Brazil
    12:15 - 12:30 | A prediction-guided glass-crystallisation strategy for the isolation of new crystalline compounds: SrO-Al2O3-SiO2 as a test caseMichael PITCHER, CEMHTI CNRS UPR3079, Orléans, France
    Chris COLLINS, University of Liverpool, Liverpool, United Kingdom
    Euan DUNCAN, CEMHTI CNRS UPR3079, Orléans, France
    Amandine RIDOUARD, CEMHTI CNRS UPR3079, Orléans, France
    Franck FAYON, CEMHTI CNRS UPR3079, Orléans, France
    Emmanuel VERON, CEMHTI CNRS UPR3079, Orléans, France
    Cécile GENEVOIS, CEMHTI CNRS UPR3079, Orléans, France
    Mathieu ALLIX, CEMHTI CNRS UPR3079, Orléans, France

    person_pinMichael PITCHER, CEMHTI CNRS UPR3079, Orléans, France
    K11:00 - 11:30 | FLAIR: A New Research Center on Fermi Level Engineering of Oxide Electroceramics  Andreas KLEIN, Technical University of Darmstadt, Darmstadt, Germany

    person_pinAndreas KLEIN, Technical University of Darmstadt, Darmstadt, Germany
    11:30 - 11:45 | Band Gap Tailoring in Doped Alkaline-Earth Hexaborides: Advanced Materials for Neutron Detection ApplicationsAlan HIRALES, University of California San Diego, La Jolla, United States
    Roxana MORTON, University of Nevada, Reno, Reno, United States
    Victor R. VASQUEZ, University of Nevada, Reno, Reno, United States
    Olivia A. GRAEVE, University of California San Diego, La Jolla, United States

    person_pinAlan HIRALES, University of California San Diego, La Jolla, United States
    11:45 - 12:00 | Dielectric Relaxation, Local Structure and Lattice Dynamics in Mn-Doped Potassium Tantalate CeramicsAlexander TKACH, Department of Materials and Ceramic Engineering, CICECO–Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    Igor LEVIN, Materials Measurement Science Division, National Institute of Standards and Technology, Gaithersburg, MD, United States
    Joseph C. WOICIK , Materials Measurement Science Division, National Institute of Standards and Technology, Gaithersburg, MD, United States
    Abilio ALMEIDA, Department of Physics of Science Faculty, IFIMUP, University of Porto, Porto, Portugal
    Paula M. VILARINHO, Department of Materials and Ceramic Engineering, CICECO–Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal

    person_pinAlexander TKACH, Department of Materials and Ceramic Engineering, CICECO–Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    12:00 - 12:15 | Effect of Defect Dynamics on Reliability of Base Metal Electrode Multilayer Ceramic CapacitorPedram YOUSEFIAN, Penn State University, University Park, United States
    Clive RANDALL, Penn State University, University Park, United States

    person_pinPedram YOUSEFIAN, Penn State University, University Park, United States
    12:15 - 12:30 | Analysis of dielectric properties of alumina ceramics as a function of surface and porosity ?Alexander SCHUSTER, Hochschule Koblenz, Höhr-Grenzhausen, Germany
    Josef SCHULZ, Hochschule Koblenz, Höhr-Grenzhausen, Germany
    Priscilla CAMARGOS MACIEIRA , Hochschule Koblenz, Höhr-Grenzhausen, Germany
    Antje LIERSCH, Hochschule Koblenz, Höhr-Grenzhausen, Germany

    person_pinAlexander SCHUSTER, Hochschule Koblenz, Höhr-Grenzhausen, Germany
    12:30 - 12:45 | Ultra-low thermal conductivity in scheelite ceramicsHicham AIT LAASRI, GREMAN UMR7347, Blois, France
    Eliane BSAIBESS, GREMAN UMR7347, Blois, France
    Damien BRAULT, GREMAN UMR7347, Blois, France
    Guillaume NATAF, GREMAN UMR7347, Blois, France
    Fabian DELORME, GREMAN UMR7347, Blois, France
    Fabien GIOVANNELLI, GREMAN UMR7347, Blois, France

    person_pinHicham AIT LAASRI, GREMAN UMR7347, Blois, France
    HL11:00 - 11:30 | Research and development of II-VI transparent ceramics  Yiquan WU, New York State College of Ceramics, Alfred University , Alfred , United States

    person_pinYiquan WU, New York State College of Ceramics, Alfred University , Alfred , United States
    11:30 - 11:45 | Study of Gd3NbO7:Eu3+ phase transition: toward the elaboration of new transparent ceramic as infrared LASER sources  Louis CORNET,
    Rémy BOULESTEIX, IRCer, Limoges, France
    Jean-Marc HEINTZ, ICMCB , Bordeaux , France
    Alexandre MAITRE, IRCer, Limoges, France
    Véronique JUBERA, ICMCB , Bordeaux , France

    person_pinLouis CORNET, ICMCB , Bordeaux , France; IRCer, Limoges, France
    11:45 - 12:00 | Optical and mechanical performances of IR transparent CaLa2S4 ceramicsGuillaume R. DURAND, Solcera Advanced Materials, 27000 Évreux, France
    Lucile LALLEMANT, Solcera Advanced Materials, 27000 Évreux, France
    Christophe COUREAU, Solcera Advanced Materials, 27000 Évreux, France
    Antoine GAUTIER , Univ. Rennes, CNRS, ISCR (Institut des Sciences Chimiques de Rennes) - UMR 6226, 35000 Rennes, France
    Thierry JOUAN, Univ. Rennes, CNRS, ISCR (Institut des Sciences Chimiques de Rennes) - UMR 6226, 35000 Rennes, France
    Xianghua ZHANG, Univ. Rennes, CNRS, ISCR (Institut des Sciences Chimiques de Rennes) - UMR 6226, 35000 Rennes, France
    Catherine BOUSSARD, Univ. Rennes, CNRS, ISCR (Institut des Sciences Chimiques de Rennes) - UMR 6226, 35000 Rennes, France
    Odile MERDRIGNAC-CONANEC, Univ. Rennes, CNRS, ISCR (Institut des Sciences Chimiques de Rennes) - UMR 6226, 35000 Rennes, France

    person_pinGuillaume R. DURAND, Solcera Advanced Materials, 27000 Évreux, France
    12:00 - 12:15 | Effect of   inversion degree   on the   optical spectra of transition element doped  spinel lattice  transparent ceramic hostsAdrian GOLDSTEIN, CERAMOSAURUS REX, HAIFA, Israel
    Guangran ZHANG, N Y state college of ceramics, Alfred university, Alfred , United States
    Yquan WU, N Y state college of ceramics, Alfred university, Alfred , United States
    Alexander SHAMES, Department of physics, Ben-Gurion University, Beer Sheva, Israel

    person_pinAdrian GOLDSTEIN, CERAMOSAURUS REX, HAIFA, Israel
    12:15 - 12:30 | Processing and properties of infrared transparent (oxy)sulfide ceramics  Odile MERDRIGNAC-CONANEC, Univ Rennes, CNRS, ISCR - UMR 6226, F-35000, Rennes, France, Rennes, France
    Guillaume DURAND,
    Alexandre LE COZ, Univ Rennes, CNRS, ISCR - UMR 6226, F-35000, Rennes, France, Rennes, France
    Christophe CHLIQUE, Univ Rennes, CNRS, ISCR - UMR 6226, F-35000, Rennes, France, Rennes, France
    Noha HAKMEH, Univ Rennes, CNRS, ISCR - UMR 6226, F-35000, Rennes, France, Rennes, France
    Fabrice CÉLARIÉ, Univ Rennes, CNRS, IPR - UMR 6251, F-35000, Rennes, France, Rennes, France
    Thierry JOUAN, Univ Rennes, CNRS, ISCR - UMR 6226, F-35000, Rennes, France, Rennes, France
    Antoine GAUTIER, Univ Rennes, CNRS, ISCR - UMR 6226, F-35000, Rennes, France, Rennes, France
    François CHEVIRÉ, Univ Rennes, CNRS, ISCR - UMR 6226, F-35000, Rennes, France, Rennes, France
    Catherine BOUSSARD, Univ Rennes, CNRS, ISCR - UMR 6226, F-35000, Rennes, France, Rennes, France
    Xianghua ZHANG, Univ Rennes, CNRS, ISCR - UMR 6226, F-35000, Rennes, France, Rennes, France

    person_pinOdile MERDRIGNAC-CONANEC, Univ Rennes, CNRS, ISCR - UMR 6226, F-35000, Rennes, France, Rennes, France
    12:30 - 12:45 | Study of sintering and dopant distribution in Cr4+:YAG transparent ceramics and its use as passively Q-switching media in IR LaserRémy BOULESTEIX, Univ. Limoges, limoges, France
    Alexandre MAÎTRE, Univ. Limoges, limoges, France
    Camille PERRIÈRE, SOLCERA, Evreux, France
    Benjamin FORESTIER, CILAS, Orléans, France
    Jean-Eucher MONTAGNE, CILAS, Orléans, France
    Alain BRENIER, ILM, Lyon, France

    person_pinRémy BOULESTEIX, Univ. Limoges, limoges, France
    K11:00 - 11:30 | New insights into the fuel electrode degradation during solid oxide cells operation  Muhammad Shirjeel KHAN, Institute of Energy and Climate Research (IEK-1), Forschungszentrum Juelich, Juelich, Germany
    Christian LENSER, Institute of Energy and Climate Research (IEK-1), Forschungszentrum Juelich, Juelich, Germany
    Christian DELLEN, Institute of Energy and Climate Research (IEK-1), Forschungszentrum Juelich, Juelich, Germany
    Doris SEBOLD, Institute of Energy and Climate Research (IEK-1), Forschungszentrum Juelich, Juelich, Germany
    Yoo Jung SOHN, Institute of Energy and Climate Research (IEK-1), Forschungszentrum Juelich, Juelich, Germany
    Egbert WESSEL, Institute of Energy and Climate Research (IEK-2), Forschungszentrum Juelich, Juelich, Germany
    Norbert H. MENZLER, Institute of Energy and Climate Research (IEK-1), Forschungszentrum Juelich, Juelich, Germany

    person_pinMuhammad Shirjeel KHAN, Institute of Energy and Climate Research (IEK-1), Forschungszentrum Juelich, Juelich, Germany
    11:30 - 11:45 | GeO2 Incorporated Li1.5Al0.5Ti1.5(PO4)3 Electrolyte for High Performance Solid State Lithium Ion BatteriesSeulgi SHIN, Kwangwoon University, Seoul, Korea (Republic of)
    Sung Hyun KANG, Kwangwoon University, Seoul, Korea (Republic of)
    Geon-Hee KIM, Gyeonsang National University, Jinju, Korea (Republic of)
    Do Yeon KIM, Kwangwoon University, Seoul, Korea (Republic of)
    Sang-Mo KOO, Kwangwoon University, Seoul, Korea (Republic of)
    Kyoung-Seok MOON, Gyeonsang National University, Jinju, Korea (Republic of)
    Weon Ho SHIN, Kwangwoon University, Seoul, Korea (Republic of)

    person_pinSeulgi SHIN, Kwangwoon University, Seoul, Korea (Republic of)
    11:45 - 12:00 | Polymer derived SiOC/Sn nanocomposites from a low-cost single source precursor as anode materials for lithium storage applicationsNatalia KOVALSKA, Empa, Dübendorf , Switzerland
    Gurdial BLUGAN, Empa, Dübendorf , Switzerland
    Matthias KOEBEL, Siloxene AG, Wangen-Bruttisellen, Switzerland

    person_pinNatalia KOVALSKA, Empa, Dübendorf , Switzerland
    12:00 - 12:15 | “Polymer-in-ceramic” hybrid electrolytes based on NASICON porous ceramic for all-solid state sodium ion batteriesJohanna M. NARANJO-BALSECA, UNIVERSIDAD CARLOS III DE MADRID, LEGANES, Spain
    Cynthia S. MARTINEZ-CISNEROS, UNIVERSIDAD CARLOS III DE MADRID, LEGANES, Spain
    Bidhan PANDIT, UNIVERSIDAD CARLOS III DE MADRID, LEGANES, Spain
    Belen LEVENFELD, UNIVERSIDAD CARLOS III DE MADRID, LEGANES, Spain
    Jean-Yves SANCHEZ, UNIVERSIDAD CARLOS III DE MADRID, LEGANES, Spain
    Alejandro VAREZ, UNIVERSIDAD CARLOS III DE MADRID, LEGANES, Spain

    person_pinCynthia S. MARTINEZ-CISNEROS, UNIVERSIDAD CARLOS III DE MADRID, LEGANES, Spain
    12:15 - 12:30 | Preparation of niobium pentoxide nanofibers by reactive needleless electrospinningIvan SHEPA, The Institute of Materials Research of SAS, Slovak Academy of Sciences, Košice, Slovakia
    Erika MUDRA , The Institute of Materials Research of SAS, Slovak Academy of Sciences, Košice, Slovakia
    Dominika CAPKOVA , Department of Physical Chemistry, Institute of Chemistry, Faculty of Science, Pavol Jozef Šafárik University, Košice, Slovakia
    Alexandra KOVALCIKOVA, The Institute of Materials Research of SAS, Slovak Academy of Sciences, Košice, Slovakia
    Ondrej PETRUS, The Institute of Materials Research of SAS, Slovak Academy of Sciences, Košice, Slovakia
    Frantisek KROMKA, The Institute of Materials Research of SAS, Slovak Academy of Sciences, Košice, Slovakia
    Ondrej MILKOVIC, The Institute of Materials Research of SAS, Slovak Academy of Sciences, Košice, Slovakia
    Vitaliy ANTAL, Institute of Experimental Physics, Slovak Academy of Sciences, Slovak Academy of Sciences, Košice, Slovakia
    Matej BALAZ, Institute of Geotechnics, Slovak Academy of Sciences, Košice, Slovakia
    Maksym LISNICHUK ,
    Dominika MARCIN-BEHUNOVA , Institute of Geotechnics, Slovak Academy of Sciences, Košice, Slovakia
    Jan DUSZA, The Institute of Materials Research of SAS, Slovak Academy of Sciences, Košice, Slovakia

    person_pinIvan SHEPA, The Institute of Materials Research of SAS, Slovak Academy of Sciences, Košice, Slovakia
    11:00 - 11:30 | Advances in Photon-harvesting Technologies for Perovskite Absorbers and Water Splitting Reactions  Sanjay MATHUR, University of Cologne, Cologne, Germany

    person_pinSanjay MATHUR, University of Cologne, Cologne, Germany
    11:30 - 12:00 | High Entropy Perovskites for Green Hydrogen Generation/UtilizationXingbo LIU, West Virginia University, Morgantown, United States

    person_pinXingbo LIU, West Virginia University, Morgantown, United States
    12:00 - 12:30 | Self-supported electrocatalysts of tantalum-based nitrides developed through precursor derived route for hydrogen evolutionKumar RAVI , Indian Institute of Technology Madras, Chennai, India
    Raghunath Sharma MUKKAVILLI , Indian Institute of Technology Madras, Chennai, India
    Ganesh Babu THIYAGARAJAN, Indian Institute of Technology Madras, Chennai, India
    Arunkumar B R, Indian Institute of Technology Madras, Chennai, India
    David GRAF, University of Cologne, Cologne, Germany
    Thomas FISCHER, University of Cologne, Cologne, Germany
    Michael WILHELM, University of Cologne, Cologne, Germany
    Silke CHRISTIANSEN, Fraunhofer IKTS, Dresden, Germany
    Sanjay MATHUR, University of Cologne, Cologne, Germany

    person_pinKumar RAVI , Indian Institute of Technology Madras, Chennai, India
    12:30 - 13:00 | Advances and Challenges to the Manufacturing of Electroceramics with Cold SinteringClive RANDALL, The Pennsylvania State University, United States

    person_pinClive RANDALL, The Pennsylvania State University, United States
    14:30 - 14:50 | Reactive magnesia-based composites: the pursuit of green constructionAnna-Marie LAUEMANNOVA, UCT Prague, Czech Republic

    person_pinAnna-Marie LAUEMANNOVA, UCT Prague, Czech Republic
    14:50 - 15:10 | Local Thermal Characterisation of Ceramic Coated Nuclear Fuel ParticlesEleanor WHITE, University of Bristol, UNITED KINGDOM

    person_pinEleanor WHITE, University of Bristol, UNITED KINGDOM
    15:10 - 15:30 | Development and potentiality of binder jetting of structural and functional ceramicsMarco MARIANI, Dipartimento di Meccanica, ITALY

    person_pinMarco MARIANI, Dipartimento di Meccanica, ITALY
    15:30 - 15:50 | Production and properties of potassium-sodium niobate (KNN) ceramics by different advanced sintering techniquesLevent KARACASULU,
    Mattia BIESUZ,
    Vincenzo SGLAVO,
    Cekdar VAKIFAHMETOGLU, Izmir Institute of Technology, Izmir, Turkey

    person_pinLevent KARACASULU, Izmir Institute of Technology, Izmir, Turkey;
    15:50 - 16:10 | Magnetic Fe-doped Calcium Phosphates: versatile materials for multifunctional applicationsTania S. S. CARVALHO, Materials and Ceramics Eng. Dept. - University of Aveiro, Aveiro, Portugal

    person_pin
    16:10 - 16:30 | MOF-based core-shell structures nanofiltration membranes for water purificationXinxin CHEN, Aalborg University, Department of chemistry and Bioscience, DENMARK

    person_pinXinxin CHEN, Aalborg University, Department of chemistry and Bioscience, DENMARK
    14:30 - 14:45 | Vat photopolymerization of metal-functionalized polymer-derived ceramics as catalysts for CO2 methanationThomas KONEGGER, TU Wien, Institute of Chemical Technologies and Analytics, Vienna, Austria
    Johannes ESSMEISTER, TU Wien, Institute of Chemical Technologies and Analytics, Vienna, Austria
    Lisa SCHACHTNER, TU Wien, Institute of Chemical Technologies and Analytics, Vienna, Austria
    Eva SZOLDATITS, TU Wien, Institute of Materials Chemistry, Vienna, Austria
    Antonia LICHTENEGGER, Medical University of Vienna, Center for Medical Physics and Biomedical Engineering, Vienna, Austria
    Bernhard BAUMANN, Medical University of Vienna, Center for Medical Physics and Biomedical Engineering, Vienna, Austria
    Karin FÖTTINGER, TU Wien, Institute of Materials Chemistry, Vienna, Austria

    person_pinThomas KONEGGER, TU Wien, Institute of Chemical Technologies and Analytics, Vienna, Austria
    14:45 - 15:00 | In situ formation of Ni nanoparticles inside a Si-C-N-O(H) ceramic obtained via the PDC route : Possible application for OERMarwan BEN MILED,
    Stéphane CÉLÉRIER, IC2MP, Poitiers, France
    Aurélien HABRIOUX, IC2MP, Poitiers, France
    Olivier MASSON, IRCER, Limoges, France
    Samuel BERNARD, IRCER, Limoges, France

    person_pinMarwan BEN MILED, IRCER, Limoges, France; IC2MP, Poitiers, France
    15:00 - 15:15 | Porous carbon-rich transition metal modified SiCN ceramic nanocomposites for electrochemical water splittingAwin ERANEZHUTH WASAN , University of Bayreuth, Bayreuth, Germany
    Günter MOTZ, University of Bayreuth, Bayreuth, Germany

    person_pinAwin ERANEZHUTH WASAN , University of Bayreuth, Bayreuth, Germany
    15:15 - 15:30 | Novel hydrogen chemisorption properties of polymer-derived alkali meal cation-modified amorphous Si-B-N-based ceramic materialShotaro TADA,
    Motoharu TERASHIMA, Department of Life Science and Applied Chemistry, Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan
    Daisuke SHIMIZU, Department of Life Science and Applied Chemistry, Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan
    Asakuma NORIFUMI, Department of Life Science and Applied Chemistry, Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan
    Samuel BERNARD, University of Limoges, CNRS, IRCER, UMR 7315, Limoges, France
    Yuji IWAMOTO, Department of Life Science and Applied Chemistry, Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan

    person_pinShotaro TADA, Ceramic Technologies for Futuristic Mobility (CTFM) Center, Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras, Chennai, India; Department of Life Science and Applied Chemistry, Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan
    15:30 - 15:45 | Hydrogen adsorption/desorption properties of polymer-derived Ni nanocrystallites embedded within amorphous silicon nitrideNorifumi ASAKUMA, Department of Life Science and Applied Chemistry, Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan
    Shotaro TADA,
    Sawao HONDA, Department of Life Science and Applied Chemistry, Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan
    Toru ASAKA, Department of Life Science and Applied Chemistry, Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan
    Tomoyuki TAMURA, Department of Applied Physics, Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan
    Samuel BERNARD, CNRS, IRCER, UMR 7315, University of Limoges, Limoges, France
    Yuji IWAMOTO, Department of Life Science and Applied Chemistry, Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan

    person_pinNorifumi ASAKUMA, Department of Life Science and Applied Chemistry, Graduate School of Engineering, Nagoya Institute of Technology, Nagoya, Japan
    14:30 - 14:45 | Potential for layer-less Additive Manufacturing with liquid precursor feedstocksKai HUANG, Industrial Engineering Department, University of Padova, Padova, Italy
    Anna DE MARZI, Industrial Engineering Department, University of Padova, Padova, Italy
    Paolo COLOMBO, Industrial Engineering Department, University of Padova, Padova, Italy
    Giorgia FRANCHIN, Industrial Engineering Department, University of Padova, Padova, Italy

    person_pinGiorgia FRANCHIN, Industrial Engineering Department, University of Padova, Padova, Italy
    14:45 - 15:00 | Tailoring 3D printed Ceramics via Two-Photon-Polymerization and Lithography-based Ceramic ManufacturingJohanna SÄNGER,
    Anna-Katharina HOFER, Montanuniversity Leoben, Leoben, Austria
    Josef SCHLACHER, Montanuniversity Leoben, Leoben, Austria
    Jens GÜNSTER,
    Raúl BERMEJO, Montanuniversity Leoben, Leoben, Austria

    person_pinJohanna SÄNGER, Montanuniversity Leoben, Leoben, Austria; Federal Institute for Materials Research and Testing (BAM), Berlin, Germany
    15:00 - 15:15 | Laser deposition and sintering for the fabrication of multicomponent microelectronic devices with BaTiO3 as dielectric componentMaria CANILLAS, Centro Laser - Universidad Politécnica de Madrid, Madrid, Spain
    David CANTELI, Centro Laser - Universidad Politécnica de Madrid, Madrid, Spain
    Cristina MUÑOZ, Centro Laser - Universidad Politécnica de Madrid, Madrid, Spain
    Miguel Angel RODRIGUEZ, Instituto de Cerámica y Vidrio (ICV) - Consejo Superior de Investigaciones Científicas (CSIC), Madrid, Spain
    Carlos MOLPECERES, Centro Laser - Universidad Politécnica de Madrid, Madrid, Spain
    Miguel MORALES, Centro Laser - Universidad Politécnica de Madrid, Madrid, Spain

    person_pinMaria CANILLAS, Centro Laser - Universidad Politécnica de Madrid, Madrid, Spain
    15:15 - 15:30 | Laser-based additive manufacturing of aqueous suspensions for fabricating large and dense ceramic components Johannes HOMA, Lithoz GmbH, Vienna, Austria
    Thomas MUEHLER, QEP3D GmbH, Stahnsdorf, Germany
    Yannik ZIEGER, Lithoz GmbH, Vienna, Austria
    Mehdi MOHAMMADI, Lithoz GmbH, Vienna, Austria
    Martin SCHWENTENWEIN, Lithoz GmbH, Vienna, Austria

    person_pinJohannes HOMA, Lithoz GmbH, Vienna, Austria
    15:30 - 15:45 | Qualitative and Quantitative aspects of Tool-Path Planning in Direct Extrusion 3D-Printing of Lunar Soil SimulantDhanashri DESAI, Indian Institute of Science, Bengaluru, India
    Aloke KUMAR, Indian Institute of Science, Bengaluru, India
    Koushik VISWANATHAN, Indian Institute of Science, Bengaluru, India

    person_pinDhanashri DESAI, Indian Institute of Science, Bengaluru, India
    K14:30 - 15:00 | Industrial development of advanced structural ceramics: SiC-fibresAntoine VIARD, BJS Ceramics GmbH, Bayreuth, Germany
    Michael ROTHMANN, BJS Ceramics GmbH, Bayreuth, Germany
    Werner HUMBS, BJS Ceramics GmbH, Bayreuth, Germany

    person_pinAntoine VIARD, BJS Ceramics GmbH, Bayreuth, Germany
    15:00 - 15:15 | Development of next-generation oxidic ceramic fibres for the establishment of value chains within Europe  Lena GLASER, Fraunhofer Institut für Silicatforschung, Zentrum für Hochtemperaturleichtbau, Würzburg, Germany
    Arne RÜDINGER, Fraunhofer Institut für Silicatforschung, Zentrum für Hochtemperaturleichtbau, Würzburg, Germany
    Ralf HERBORN, Fraunhofer Institut für Silicatforschung, Zentrum für Hochtemperaturleichtbau, Würzburg, Germany

    person_pinLena GLASER, Fraunhofer Institut für Silicatforschung, Zentrum für Hochtemperaturleichtbau, Würzburg, Germany
    15:15 - 15:30 | BN film coating on SiC fibre tow by cold wall CVD from triethylamine borane complexPierre FENETAUD, LCTS UMR 5801, CNRS - University of Bordeaux - Safran - CEA, 3 allee de la Boetie, 33600 Pessac, France, PESSAC, France
    Sylvain JACQUES, LCTS UMR 5801, CNRS - University of Bordeaux - Safran - CEA, 3 allee de la Boetie, 33600 Pessac, France, PESSAC, France

    person_pinSylvain JACQUES, LCTS UMR 5801, CNRS - University of Bordeaux - Safran - CEA, 3 allee de la Boetie, 33600 Pessac, France, PESSAC, France
    15:30 - 15:45 | Ceramic coating of short fibers by Fluidized Bed Chemical Vapor DepositionThomas DA CALVA, Laboratoire des Composites ThermoStructuraux, PESSAC, France
    Georges CHOLLON, Laboratoire des Composites ThermoStructuraux, PESSAC, France
    Nathalie BERTRAND, Laboratoire des Composites ThermoStructuraux, PESSAC, France

    person_pinThomas DA CALVA, Laboratoire des Composites ThermoStructuraux, PESSAC, France
    15:45 - 16:00 | Synthesis of silicon carbide precursor block copolymers and study of the surface nanostructuring.Victor PERRAUDIN, IRCER, Limoges, France
    Romain LUCAS, IRCER, Limoges, France
    Sylvie FOUCAUD, IRCER, Limoges, France
    Emeline RENAUDIE, IRCER, Limoges, France
    Guillaume FLEURY, LCPO, Bordeaux, France
    Benjamin CABANNES-BOUÉ, LCPO, Bordeaux, France

    person_pinVictor PERRAUDIN, IRCER, Limoges, France
    16:00 - 16:15 | Crack pattern evolution during the pyrolysis of unidirectional fibre reinforced ceramic matrix compositesFelix WICH, University of Bayreuth - Chair of Ceramic Materials Engineering, Bayreuth, Germany
    Melissa MOOS, University of Bayreuth - Chair of Ceramic Materials Engineering, Bayreuth, Germany
    Nico LANGHOF, University of Bayreuth - Chair of Ceramic Materials Engineering, Bayreuth, Germany
    Michael FLECK, University of Bayreuth - Metals and Alloys, Bayreuth, Germany
    Walter KRENKEL, University of Bayreuth - Chair of Ceramic Materials Engineering, Bayreuth, Germany
    Stefan SCHAFFÖNER, University of Bayreuth - Chair of Ceramic Materials Engineering, Bayreuth, Germany

    person_pinFelix WICH, University of Bayreuth - Chair of Ceramic Materials Engineering, Bayreuth, Germany
    16:15 - 16:30 | Carbon-fiber-reinforced CMCs for high temperatures: processing flexibility and tailored microstructuresMassimiliano VALLE, Petroceramics, Stezzano, Italy
    Lorenzo CAVALLI, Petroceramics, Stezzano, Italy
    Fabio GIACOMETTI, Petroceramics, Stezzano, Italy
    Yasir AKRAM, Petroceramics, Stezzano, Italy
    Matteo BOIOCCHI, Petroceramics, Stezzano, Italy
    Michela CANTÙ, Petroceramics, Stezzano, Italy

    person_pinFabio GIACOMETTI, Petroceramics, Stezzano, Italy
    HL14:30 - 15:00 | A review of bond systems for refractory castablesFrederic LACOUE, IMERYS, Paris, France
    Chris PARR, IMERYS, Paris, France
    Ratana SOTH, IMERYS, Paris, France
    Christoph WÖHRMEYER, IMERYS, Paris, France

    person_pinFrederic LACOUE, IMERYS, Paris, France
    Christoph WÖHRMEYER, IMERYS, Paris, France
    15:00 - 15:15 | Alternative colloidal binders having a high solid content to colloidal silica or alumina for refractory castablesSandra ABDELOUHAB, BCRC, Mons, Belgium
    Charlotte LANG, BCRC, Mons, Belgium
    Cathy DELMOTTE, BCRC, Mons, Belgium
    Veronique VANDENEEDE, BCRC, Mons, Belgium
    Michael THIESEN, Koblenz University of Applied Sciences, Höhr-Grenzhausen, Germany
    Luis IBARRA, Koblenz University of Applied Sciences, Höhr-Grenzhausen, Germany
    Olaf KRAUSE, Koblenz University of Applied Sciences, Höhr-Grenzhausen, Germany
    Erwan BROCHEN, Forschungsgemeinschaft Feuerfest e. V. (FGF) at the European Centre for Refractories (ECREF), Höhr-Grenzhausen, Germany
    Christian DANNERT, Forschungsgemeinschaft Feuerfest e. V. (FGF) at the European Centre for Refractories (ECREF), Höhr-Grenzhausen, Germany

    person_pinSandra ABDELOUHAB, BCRC, Mons, Belgium
    15:15 - 15:30 | Evaluating polycyclic aromatic hydrcarbon-free binders in taphole clays - a possible alternative to coal tar pitch Izak CAMERON, University of Pretoria, Hatfield, Pretoria, South Africa
    Andrie GARBERS-CRAIG, University of Pretoria, Hatfield, Pretoria, South Africa

    person_pinIzak CAMERON, University of Pretoria, Hatfield, Pretoria, South Africa
    15:30 - 15:45 | Lightweight porous ultra-high temperature ceramic with high strength and low thermal conductivityWu ZHEN, Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang , China
    Wang JINGYANG, Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang , China

    person_pinWu ZHEN, Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang , China
    15:45 - 16:00 | MgO-MgAl2O4 Refractories with Low Thermal Conductivity for Energy-saving in Rotary KilnsAkkasoglu UFUK, Kumas Refractories R&D Center, Kutahya, Turkey
    Yanik GORKEM, Kumas Refractories R&D Center, Kutahya, Turkey
    Sarioglu NURI, Kumas Refractories R&D Center, Kutahya, Turkey

    person_pinAkkasoglu UFUK, Kumas Refractories R&D Center, Kutahya, Turkey
    16:00 - 16:15 | Refractory metamaterials for tuning thermal emission at high temperatureSyreina SAYEGH,
    Alima NZIE,
    Mikhael BECHELANY, Institut Européen des Membranes (IEM), UMR 5635, Univ Montpellier, CNRS, ENSCM, Place Eugène Bataillon, 34095, Montpellier, France
    Olivier ROZENBAUM,
    Quentin FLAMANT,

    person_pinQuentin FLAMANT, Saint-Gobain Research Provence, 550 Rue Alphonse Jauffret, 84300, Cavaillon, France; Laboratoire Commun Canopée, CNRS / Université de Lorraine / Saint-Gobain, Orléans / Nancy / Cavaillon / Paris, France
    HL14:30 - 15:00 | No material leak, large-scale (even roll-to-roll), and mold-free near net-shaping of advanced ceramics is possibleAleyna Beste OZHAN, Sabanci University, Istanbul, Turkey
    Isik AREL, Sabanci University, Istanbul, Turkey
    Ayse AY, Sabanci University, Istanbul, Turkey
    Ozge AKBULUT, Sabanci University, Istanbul, Turkey

    person_pinOzge AKBULUT, Sabanci University, Istanbul, Turkey
    15:00 - 15:15 | Bio-based Silicon Carbide Ceramics from Thermoset-Based Wood Polymer CompositesChristian FUERST, Wood K plus - Kompetenzzentrum Holz GmbH, Linz, Austria
    Matthias MIHALIC, Wood K plus - Kompetenzzentrum Holz GmbH, Linz, Austria
    Christopher WALLIS, RHP-Technology GmbH, Seibersdorf, Austria
    Erich NEUBAUER, RHP-Technology GmbH, Seibersdorf, Austria
    Christoph UNTERWEGER, Wood K plus - Kompetenzzentrum Holz GmbH, Linz, Austria

    person_pinChristoph UNTERWEGER, Wood K plus - Kompetenzzentrum Holz GmbH, Linz, Austria
    15:15 - 15:30 | Sr-doped calcium and barium manganites as catalysts in heterogeneous oxidation of volatile organic compoundsAndreja ŽUŽIC, University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, Croatia
    Filip CAR, University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, Croatia
    Jelena MACAN, University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, Croatia
    Vesna TOMAŠI?, University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, Croatia
    Andreja GAJOVIC, Ruđer Bošković Institute, Zagreb, Croatia

    person_pinAndreja ŽUŽIC, University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, Croatia
    15:30 - 15:45 | Fe-doped Pr2Zr2O7 pyrochlore: a promising material for different applicationsEmerson Luiz DOS SANTOS VEIGA, Universidad Jaume I, Castellon, Castellon, Spain
    Héctor BELTRÁN-MIR, Universidad Jaume I, Castellon, Castellon, Spain
    Xavier VENDRELL VILLAFRUELA, Institute of Energy Technologies, Universitat Politècnica de Catalunya, EEBE, Eduard Maristany, Barcelona, Spain
    Jordi LLORCA, Institute of Energy Technologies, Universitat Politècnica de Catalunya, EEBE, Eduard Maristany, Barcelona, Spain
    Eloisa CORDONCILLO, Universidad Jaume I, Castellon, Castellon, Spain

    person_pinHéctor BELTRÁN-MIR, Universidad Jaume I, Castellon, Castellon, Spain
    15:45 - 16:00 | Towards sustainable ?development and use of nanomaterials: understanding environmental transformation of engineered nanoparticlesAlexander KHORT, KTH Royal Institute of Technology, Stockholm, Sweden
    Tingru CHANG, KTH Royal Institute of Technology, Stockholm, Sweden
    Marianne BROOKMAN-AMISSAH, University of Gothenburg, Gothenburg, Sweden
    Jonas HEDBERG, University of Western Ontario, London, Canada
    Eva BLOMBERG, KTH Royal Institute of Technology, Stockholm, Sweden
    Inger ODNEVALL, KTH Royal Institute of Technology, Stockholm, Sweden

    person_pinAlexander KHORT, KTH Royal Institute of Technology, Stockholm, Sweden
    HL14:30 - 15:00 | Design and evaluation of glass-ceramics for nuclear waste immobilizationJohn MCCLOY,

    person_pinJohn MCCLOY,
    15:00 - 15:15 | Effect of kaolin addition on the microstructure and mechanical properties of a glass-ceramic glazeJosé Luís AMORÓS, Instituto de Tecnología Cerámica, Castellón de la Plana, Spain
    Arnaldo MORENO, Instituto de Tecnología Cerámica, Castellón de la Plana, Spain
    Encarna BLASCO, Instituto de Tecnología Cerámica, Castellón de la Plana, Spain
    Carlos FELIU, Instituto de Tecnología Cerámica, Castellón de la Plana, Spain

    person_pinArnaldo MORENO, Instituto de Tecnología Cerámica, Castellón de la Plana, Spain
    15:15 - 15:30 | Structural and physico-chemical properties of selected glasses in the (Ca1-xMgx)O-Al2O3 systemAnatoly ARKHIPIN,
    Alexander PISCH, SIMaP-CNRS, Grenoble, France
    Irina USPENSKAYA, Lomonosov Moscow State University, Moscow, Russian Federation
    Noel JAKSE, SIMaP-CNRS, Grenoble, France
    Semen KUZOVCHIKOV, Thermochemistry of Materials SRC, NUST MISIS, Moscow, Russian Federation
    Alexandra KHVAN,
    Daniel NEUVILLE, IPGP-CNRS, Paris, France

    person_pinAnatoly ARKHIPIN, University Grenoble Alpes, Grenoble, France; Lomonosov Moscow State University, Moscow, Russian Federation
    15:30 - 15:45 | Preparation of hierarchically porous phase separated foam glasses  Martin SEDLACIK, Brno University of Technology, Brno, Czechia
    Eva BARTONÍCKOVÁ, Brno University of Technology, Brno, Czechia
    Jakub PALOV?ÍK, Brno University of Technology, Brno, Czechia
    Vladislav CÁBA, Brno University of Technology, Brno, Czechia
    Jirí MÁSILKO, Brno University of Technology, Brno, Czechia

    person_pinMartin SEDLACIK, Brno University of Technology, Brno, Czechia
    15:45 - 16:00 | The Impact of BaO Addition on the Structure and Microstructure of Glazes of the SiO2-Al2O3-CaO-MgO-Na2O systemKatarzyna PASIUT, AGH UST, Krakow, Poland
    Janusz PARTYKA, AGH UST, Krakow, Poland
    Dawid KOZIEN, AGH UST, Krakow, Poland

    person_pinKatarzyna PASIUT, AGH UST, Krakow, Poland
    16:00 - 16:15 | Bulk Alumina Glass and Glass-Ceramics with Multiple Stabilizers  Angshuman GUPTA, Metallurgical Enginnering and Materials Science Department, Indian Institute of Technology Bombay, Mumbai, India, Mumbai, India
    Anu MOHAN, Metallurgical Enginnering and Materials Science Department, Indian Institute of Technology Bombay, Mumbai, India, Mumbai, India
    Ashutosh Suresh GANDHI, Metallurgical Enginnering and Materials Science Department, Indian Institute of Technology Bombay, Mumbai, India, Mumbai, India

    person_pinAngshuman GUPTA, Metallurgical Enginnering and Materials Science Department, Indian Institute of Technology Bombay, Mumbai, India, Mumbai, India
    HL14:30 - 15:00 | Predicting Grain Boundary States and Transitions in FerroelectricsCatherine BISHOP,
    R. Edwin GARC?A, Purdue University, West Lafayette, United States
    K.s.n. VIKRANT, Indian Institute of Technology, Delhi, India

    person_pinCatherine BISHOP, University of Canterbury, Christchurch, New Zealand; MacDiarmid Institute for Advanced Materials and Nanotechnology, Christchurch, New Zealand
    15:00 - 15:15 | Mechanochemical activation boosts compositional homogeneity in relaxor 0.67BiFeO3-0.33BaTiO3 ceramics  Antonio IACOMINI, Electronic Ceramics Department, Jožef Stefan Institute, 1000 Ljubljana, Slovenia, Ljubljana, Slovenia
    Maja KOBLAR ,
    Tadej ROJAC ,

    person_pinAntonio IACOMINI, Electronic Ceramics Department, Jožef Stefan Institute, 1000 Ljubljana, Slovenia, Ljubljana, Slovenia
    15:15 - 15:30 | Local structure distortion evaluation of Ba0.5Sr0.5Fe1-xCuxZr0.05O3-δ facing physical properties alterationS. SUASMORO, Institut Teknologi 'Sepuluh Nopember' Surabaya, Surabaya, Indonesia
    F. FITRIANA, Dept. of Physics, Universitas Negri Surabaya, Surabaya 60231, Indonesia, Surabaya, Indonesia
    W. KLUSYUBUN, Synchroton Light Research Institute (Public Organisation), 111 University Avenue, Muang, Nakhon Ratchasima 30000, Thailand, Nakhon Ratchasima, Thailand
    M. KATO, Department of Applied Physics, Tohoku University, 6-6-05, Aoba, Aramaki, Aoba-Ku, Sendai 980-8579, Japan, Sendai, Japan

    person_pinS. SUASMORO, Institut Teknologi 'Sepuluh Nopember' Surabaya, Surabaya, Indonesia
    15:30 - 15:45 | Fundamental workings of chemical substitution at the A-site of perovskite oxides: a 207Pb NMR study of Ba-substituted PbZrO3  Sonja EGERT, TU Darmstadt, Darmstadt, Germany
    Jurij KORUZA, TU Graz, Graz, Austria
    Hergen BREITZKE, TU Darmstadt, Darmstadt, Germany
    Changhao ZHAO, TU Darmstadt, Darmstadt, Germany
    Barbara MALIC, Jožef Stefan Institute, Ljubljana, Slovenia
    Gerd BUNTKOWSKY, TU Darmstadt, Darmstadt, Germany
    Pedro B. GROSZEWICZ, TU Delft, Delft, Netherlands

    person_pinPedro B. GROSZEWICZ, TU Delft, Delft, Netherlands
    15:45 - 16:00 | Properties and performance of rare-earth-doped barium titanate ceramicsVojtech MARAK, CEITEC BUT, Brno University of Technology, Brno, Czechia
    Daniel DRDLIK,
    Pavel TOFEL,
    Katarina DRDLIKOVA,
    Karel MACA,

    person_pinVojtech MARAK, CEITEC BUT, Brno University of Technology, Brno, Czechia
    16:00 - 16:15 | Investigation of Structural and Electrical Properties of Undoped and Fe-doped PNN-PZT PiezoceramicsEzgi YALÇIN, Gebze Technical University, Kocaeli, Turkey
    Namik Kemal GÖZÜAÇIK, Gebze Technical University, Kocaeli, Turkey
    Sedat ALKOY, Gebze Technical University, Kocaeli, Turkey
    Ebru MENCUR, Gebze Technical University, Kocaeli, Turkey

    person_pinEzgi YALÇIN, Gebze Technical University, Kocaeli, Turkey
    14:30 - 14:45 | Preparation of transparent erbium-ytterbium co-doped yttrium aluminum garnet Er,Yb:YAG ceramics with the aid of freeze granulationAgnieszka SZYSIAK, Łukasiewicz Research Network - Institute of Microelectronics and Photonics, Warsaw, Poland
    Dariusz PODNIESI?SKI, Łukasiewicz Research Network - Institute of Microelectronics and Photonics, Warsaw, Poland
    Helena W?GLARZ, Łukasiewicz Research Network - Institute of Microelectronics and Photonics, Warsaw, Poland
    Mykhailo CHAIKA, Institute of Low Temperature and Structure Research, Polish Academy of Sciences, Wrocław, Poland

    person_pinAgnieszka SZYSIAK, Łukasiewicz Research Network - Institute of Microelectronics and Photonics, Warsaw, Poland
    14:45 - 15:00 | Thermosensitive luminescent lanthanide-doped titanium dioxideNicolas ALONSO,
    Etienne COPIN, Clément Ader (ICA) ; Université de Toulouse ; CNRS, IMT Mines Albi, INSA, ISAE-SUPAERO, UPS, Albi, France
    Florence ANSART, CIRIMAT - UPS, Toulouse, France
    Philippe BREVET, Technical Department, Safran Helicopter Engines, Toulouse, France
    Yannick LE MAOULT, Clément Ader (ICA) ; Université de Toulouse ; CNRS, IMT Mines Albi, INSA, ISAE-SUPAERO, UPS, Albi, France
    Thierry SENTENAC, Clément Ader (ICA) ; Université de Toulouse ; CNRS, IMT Mines Albi, INSA, ISAE-SUPAERO, UPS, Albi, France
    Sandrine DULUARD, CIRIMAT - UPS, Toulouse, France

    person_pinNicolas ALONSO, Technical Department, Safran Helicopter Engines, Toulouse, France; CIRIMAT - UPS, Toulouse, France; Clément Ader (ICA) ; Université de Toulouse ; CNRS, IMT Mines Albi, INSA, ISAE-SUPAERO, UPS, Albi, France
    15:00 - 15:15 | Multiple RE3+ (RE3+ = Tb3+, Tm3+, Yb3+) crystallographic sites in highly nonstoichiometric GAGXue FANG, CNRS-CEMHTI, Orleans, France
    Mathieu ALLIX, CNRS-CEMHTI, Orleans, France
    Michael PITCHER, CNRS-CEMHTI, Orleans, France

    person_pinXue FANG, CNRS-CEMHTI, Orleans, France
    15:15 - 15:30 | Thermochromic Solar Control Coatings on SiO2-Coated Float Glass for Energy-Efficient Smart WindowsCindy Po Keh YEUNG,
    Roberto HABETS,
    Luc LEUFKENS,
    Marcel VERHEIJEN,
    Zeger VROON,
    Daniel MANN,
    Pascal BUSKENS,

    person_pinDaniel MANN, The Netherlands Organisation for Applied Scientific Research (TNO), Eindhoven, Netherlands; Brightlands Materials Center, Geleen, Netherlands
    15:30 - 15:45 | Thermochromic Coatings and Laminates for Smart Windows Comprising VO2 NanopigmentsJanique HUPPERETZ,
    Lavinia CALVI,
    Cindy YEUNG,
    Roberto HABETS,
    Luc LEUFKENS,
    Ryan VAN ZANDVOORT,
    Demi WOLTERS,
    Ken ELEN,
    An HARDY,
    Marlies VAN BAEL,
    Nicole MEULENDIJKS,
    Daniel MANN,
    Pascal BUSKENS,

    person_pinJanique HUPPERETZ, The Netherlands Organisation for Applied Scientific Research (TNO), Eindhoven, Netherlands; Brightlands Materials Center, Geleen, Netherlands
    HL14:30 - 15:00 | Cold sintering of LATP- and LiFePO4-based cathodes for Li-ion solid-state batteriesKatja WAETZIG, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden, Germany
    Mykola VINNICHENKO, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden, Germany
    Jean-Philippe BEAUPAIN, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden, Germany
    Henry AUER, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden, Germany
    Nicolas ZAPP, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden, Germany
    Mihails KUSNEZOFF, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden, Germany

    person_pinKatja WAETZIG, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden, Germany
    15:00 - 15:15 | LLZO for batteries from powder synthesis to 3D printingGurdial BLUGAN, Empa, Laboratory for High Performance Ceramics, Dübendorf, Switzerland
    Diwakar KARUPPIAH, Empa, Laboratory for High Performance Ceramics, Dübendorf, Switzerland
    Dmitrii KOMISSARENKO, Empa, Laboratory for High Performance Ceramics, Dübendorf, Switzerland
    Amir HADIAN, Empa, Laboratory for High Performance Ceramics, Dübendorf, Switzerland
    Frank CLEMENS, Empa, Laboratory for High Performance Ceramics, Dübendorf, Switzerland

    person_pinGurdial BLUGAN, Empa, Laboratory for High Performance Ceramics, Dübendorf, Switzerland
    15:15 - 15:30 | Ultra-thick additive-free ceramic LCO electrodes obtained by solvent-free powder extrusion moldingDaniel DEL RÍO SANTOS, Universidad Carlos III de Madrid, Departamento de Ciencia e Ingenieria de Materiales e Ingenieria Quimica, Avda. Universidad 30, 28911, Leganes, Spain
    Carmen DE LA TORRE-GAMARRA, Universidad Carlos III de Madrid, Departamento de Ciencia e Ingenieria de Materiales e Ingenieria Quimica, Avda. Universidad 30, 28911, Leganes, Spain
    Antonio Jesús FERNÁNDEZ-ROPERO, Universidad Carlos III de Madrid, Departamento de Ciencia e Ingenieria de Materiales e Ingenieria Quimica, Avda. Universidad 30, 28911, Leganes, Spain
    Belen LEVENFELD, Universidad Carlos III de Madrid, Departamento de Ciencia e Ingenieria de Materiales e Ingenieria Quimica, Avda. Universidad 30, 28911, Leganes, Spain
    Alejandro VAREZ, Universidad Carlos III de Madrid, Departamento de Ciencia e Ingenieria de Materiales e Ingenieria Quimica, Avda. Universidad 30, 28911, Leganes, Spain

    person_pinAntonio Jesús FERNÁNDEZ-ROPERO, Universidad Carlos III de Madrid, Departamento de Ciencia e Ingenieria de Materiales e Ingenieria Quimica, Avda. Universidad 30, 28911, Leganes, Spain
    15:30 - 15:45 | An innovative synthesis: Garnet lithium-ion conductive solid-state electrolyte synthesized by an arc melting processSarah PRADEILLES,
    Emmanuel NONNET, Saint-Gobain Research Provence, Cavaillon, France
    Vincent GABAUDAN, Saint-Gobain Research Provence, Cavaillon, France
    Patrice SIMON, CIRIMAT, Toulouse, France
    Pierre-Louis TABERNA, CIRIMAT, Toulouse, France
    Patrick ROZIER, CIRIMAT, Toulouse, France

    person_pinSarah PRADEILLES, CIRIMAT, Toulouse, France; Saint-Gobain Research Provence, Cavaillon, France
    15:45 - 16:00 | Multi-Scale Tailoring of Lithium Ion Diffusion from Densification to Coarsening  Sujin PARK, Korea Institute of Materials Science, Changwon, Korea (Republic of)
    Seongwan JANG, Korea Institute of Materials Science, Changwon, Korea (Republic of)
    Hyeonjin SON, Korea Institute of Materials Science, Changwon, Korea (Republic of)
    Chang-Jun BAE, Korea Institute of Materials Science, Changwon, Korea (Republic of)

    person_pinChang-Jun BAE, Korea Institute of Materials Science, Changwon, Korea (Republic of)
    K14:30 - 15:00 | Bio-inspired apatites: from bone to skinChristophe DROUET, CIRIMAT / Université de Toulouse, Toulouse, France
    Maela CHOIMET-BERNARD, CIRIMAT / Université de Toulouse, Toulouse, France
    Mathilde GUERIN,
    Gilles SUBRA, IBMM / Université de Montpellier, Montpellier, France
    Audrey TOURRETTE, CIRIMAT / Université de Toulouse, Toulouse, France
    Jeremy SOULIE, CIRIMAT / Université de Toulouse, Toulouse, France
    Liisa KUHN, UCONN Health / University of Connecticut, USA, Farmington, United States

    person_pinChristophe DROUET, CIRIMAT / Université de Toulouse, Toulouse, France
    15:00 - 15:15 | 3D-printing of chitosan-apatite composite materials designed for bone substitution: optimized formulation of inksSolène TADIER, Univ Lyon, INSA-Lyon, CNRS, MATEIS UMR5510, F-69621 Villeurbanne, France, Villeurbanne, France
    Fabien BROUILLET,
    Madeleine SAVIGNY,
    Quentin CARSALADE, Laboratoire CIRIMAT, Université de Toulouse, CNRS, Université Paul Sabatier, 35 ch. des Maraichers, 31062 Toulouse, Toulouse, France
    Ghislaine BERTRAND, Laboratoire CIRIMAT, Université de Toulouse, CNRS, INP- ENSIACET, 4 allée Emile Monso - BP44362, 31030 Toulouse cedex 4, Toulouse, France
    Laurent GREMILLARD, Univ Lyon, INSA-Lyon, CNRS, MATEIS UMR5510, F-69621 Villeurbanne, France, Villeurbanne, France
    Alexandra MONTEMBAULT, Laboratoire Ingénierie des Matériaux Polymères (IMP), UMR 5223, CNRS, UCBL 1, 15 Bd A. Latarjet, 69622 Villeurbanne, Villeurbanne, France

    person_pinSolène TADIER, Univ Lyon, INSA-Lyon, CNRS, MATEIS UMR5510, F-69621 Villeurbanne, France, Villeurbanne, France
    15:15 - 15:30 | Self-setting bioactive inks highly rich in CaP-based powders for 3D printingMiguel COELHO,
    Paula M. C. TORRES, DEMaC/CICECO University of Aveiro, Aveiro, Portugal
    Tiago CORREIA, Department of Chemistry, CICECO, University of Aveiro, Aveiro, Portugal
    Nilza RIBEIRO, DEMaC/CICECO University of Aveiro, Aveiro, Portugal
    João MANO, Department of Chemistry, CICECO, University of Aveiro, Aveiro, Portugal
    Susana Maria HENRIQUES OLHERO, DEMaC/CICECO University of Aveiro, Aveiro, Portugal

    person_pinSusana Maria HENRIQUES OLHERO, DEMaC/CICECO University of Aveiro, Aveiro, Portugal
    15:30 - 15:45 | Biomimetic nacre-like hydroxyapatite/polymer composites for load-bearing bone implants applicationParinaz TABRIZIAN, University of Bristol, Bristol, United Kingdom
    Huijun SUN, University of Bristol, Bristol, United Kingdom
    Urangua JARGALSAIKHAN, University of Surrey, Guildford, United Kingdom
    Tan SUI, University of Surrey, Guildford, United Kingdom
    Sean DAVIS, University of Bristol, Bristol, United Kingdom
    Bo SU, University of Bristol, Bristol, United Kingdom

    person_pinParinaz TABRIZIAN, University of Bristol, Bristol, United Kingdom
    15:45 - 16:00 | Organic/borosilicate hybrid materials for biomedical applicationsJosé Carlos ALMEIDA, Department of Materials and Ceramic Engineering, University of Aveiro, Aveiro, Portugal
    Soraia COELHO, Department of Materials and Ceramic Engineering, University of Aveiro, Aveiro, Portugal
    Tiago CORREIA, Department of Chemistry, University of Aveiro, Aveiro, Portugal
    Paula TORRES, Department of Materials and Ceramic Engineering, University of Aveiro, Aveiro, Portugal
    Susana OLHERO, Department of Materials and Ceramic Engineering, University of Aveiro, Aveiro, Portugal
    Maria Helena FERNANDES, Department of Materials and Ceramic Engineering, University of Aveiro, Aveiro, Portugal

    person_pinJosé Carlos ALMEIDA, Department of Materials and Ceramic Engineering, University of Aveiro, Aveiro, Portugal
    16:00 - 16:15 | Low Temperature Sythesized α-TCP Bone Cement - A Possibility to Improve Physicochemical Properties and Cell ResponseOznur DEMIR, Riga Technical University , Riga, Latvia

    person_pinOznur DEMIR, Riga Technical University , Riga, Latvia
    16:15 - 16:30 | Investigating the physicochemical and antibacterial properties of nanocrystalline hydroxyapatite codoped with silver and carbonateMarta TAVONI, Institute of Science, Technology and Sustainability for Ceramics , Faenza, Italy
    Massimiliano DAPPORTO, Institute of Science, Technology and Sustainability for Ceramics , Faenza, Italy
    Anna TAMPIERI, Institute of Science, Technology and Sustainability for Ceramics , Faenza, Italy
    Elena RESTIVO, Molecular Medicine Department, Center for Health Technologies, UdR INSTM, Pavia, Italy
    Livia VISAI, Molecular Medicine Department, Center for Health Technologies, UdR INSTM, Pavia, Italy
    Simone SPRIO, Institute of Science, Technology and Sustainability for Ceramics , Faenza, Italy

    person_pinMarta TAVONI, Institute of Science, Technology and Sustainability for Ceramics , Faenza, Italy
    14:30 - 15:00 | Compositional and Structural Disorder: Valuable Preparative Tools toward Novel Materials and Enablers for the Circular EconomyIonescu EMANUEL,
    Dharma Teja TEPPALLA, TU Darmstadt, Darmstadt, Germany
    Gert HOMM, Fraunhofer IWKS, Alzenau, Germany
    Anke WEIDENKAFF,

    person_pinIonescu EMANUEL, Fraunhofer IWKS, Alzenau, Germany; TU Darmstadt, Darmstadt, Germany
    15:00 - 15:30 | The Polymer-Derived Ceramics route as an innovative concept towards functional inorganic materials with boosted propertiesMarwan BEN MILED, Institute of Research for Ceramics (IRCER), Limoges, France
    Maxime CHEYPE, Institute of Research for Ceramics (IRCER), Limoges, France
    Xavier DESCHANELS, Institut de Chimie Séparative de Marcoule (ICSM) , Marcoule, France
    Aurélien HABRIOUX, Institut de Chimie des Milieux et Matériaux de Poitiers (IC2MP), Poitiers, France
    Samuel BERNARD, Institute of Research for Ceramics (IRCER), Limoges, France

    person_pinSamuel BERNARD, Institute of Research for Ceramics (IRCER), Limoges, France
    15:30 - 16:00 | Macro-porous ceramics for the Sustainable Development Goals (SDGs)Tatsuki OHJI, National Institute of Advanced Industrial Science and Technology (AIST), Nagoya, Japan
    Manabu FUKUSHIMA, National Institute of Advanced Industrial Science and Technology (AIST), Nagoya, Japan

    person_pinTatsuki OHJI, National Institute of Advanced Industrial Science and Technology (AIST), Nagoya, Japan
    16:00 - 16:30 | Machine-learning Based Microstructure-property Relationships for Ceramics Using High-Throughput, Ultra-fast Laser Sintering  Xiao GENG, Clemson University, Clemson, United States
    Jianan TANG, Clemson University, Clemson, United States
    Siddhartha SARKAR, Clemson University, Clemson, United States
    Bridget SHERIDAN, Clemson University, Clemson, United States
    Dongsheng LI, Advanced Manufacturing LLC, East Hartford, United States
    Yunfeng SHI, Rensselaer Polytechnic Institute, Troy, United States
    Jianhua TONG, Clemson University, Clemson, United States
    Hai XIAO, Clemson University, Clemson, United States
    Fei PENG, Clemson University, Clemson, United States
    Rajendra BORDIA, Clemson University, Clemson, United States

    person_pinRajendra BORDIA, Clemson University, Clemson, United States
    HL17:00 - 17:30 | Boron Nitride Nanosheets from a new source of large hBN single crystalsBérangère TOURY, Laboratoire des Multimatériaux et Interfaces - University of lyon, Villeurbanne, France
    Camille MAESTRE,
    Vincent GARNIER, Laboratoire Matériaux Ingénierie et Science - INSA Lyon, Villeurbanne, France
    Philippe STEYER, Laboratoire Matériaux Ingénierie et Science - INSA Lyon, Villeurbanne, France
    Catherine JOURNET, Laboratoire des Multimatériaux et Interfaces - University of lyon, Villeurbanne, France

    person_pinBérangère TOURY, Laboratoire des Multimatériaux et Interfaces - University of lyon, Villeurbanne, France
    17:30 - 17:45 | Bottom-up synthesis of high entropy hydroxide nanosheets and their potential applicationsFei LI, Joining and Welding Research Institute Osaka University, Osaka, Japan
    Hiroya ABE, Joining and Welding Research Institute Osaka University, Osaka, Japan

    person_pinFei LI, Joining and Welding Research Institute Osaka University, Osaka, Japan
    17:45 - 18:00 | Graphene-Si3N4 nanocomposites: powder synthesis, Spark Plasma Sintering, microstructure and propertiesAdam BERRAIS, Université Toulouse 3 / CIRIMAT, Toulouse, France
    Alicia WEIBEL, Université Toulouse 3 / CIRIMAT, Toulouse, France
    Geoffroy CHEVALLIER,
    Jérôme ESVAN, Toulouse INP / CIRIMAT, Toulouse, France
    Claude ESTOURNES, Université Toulouse 3 / CIRIMAT, Toulouse, France
    Christophe LAURENT, Université Toulouse 3 / CIRIMAT, Toulouse, France

    person_pinChristophe LAURENT, Université Toulouse 3 / CIRIMAT, Toulouse, France
    18:00 - 18:15 | Production and Characterization of SiOC Ambi/Aerogels Oyku ICIN, Department of Materials Science and Engineering, Izmir Institute of Technology, 35430, İzmir, Turkey
    Gian Domenico SORARU, Department of Industrial Engineering, University of Trento, Via Sommarive 9, 38123, Trento, Italy
    Cekdar VAKIFAHMETOGLU, Department of Materials Science and Engineering, Izmir Institute of Technology, 35430, İzmir, Turkey

    person_pinOyku ICIN, Department of Materials Science and Engineering, Izmir Institute of Technology, 35430, İzmir, Turkey
    18:15 - 18:30 | Multimodal macropore-tailoring of freeze-cast SiOC utilizing binary structure-directing agentsKatharina RAUCHENWALD, TU Wien, Wien, Austria
    Thomas KONEGGER, TU Wien, Wien, Austria

    person_pinKatharina RAUCHENWALD, TU Wien, Wien, Austria
    K17:00 - 17:30 | Mechanical behavior of MAX phasesMiladin RADOVIC, Texas A&M University, College Station, United States

    person_pinMiladin RADOVIC, Texas A&M University, College Station, United States
    17:30 - 17:45 | High temperature tribological behaviour of Ti2AlC and Ti3AlC2 MAX-phases synthetized by SPS from Ti/Al/TiC powder mixturesVedi DUPONT, BCRC (Belgian Ceramic Research centre), MONS, Belgium
    Laurent BOILET, BCRC (Belgian Ceramic Research centre), MONS, Belgium
    Jean-Pierre ERAUW, BCRC (Belgian Ceramic Research centre), MONS, Belgium

    person_pinVedi DUPONT, BCRC (Belgian Ceramic Research centre), MONS, Belgium
    17:45 - 18:00 | Synthesis of SiC/Ti3SiC2 composites with high SiC contents: sintering and thermodynamicsJerome ROGER, Laboratoire des Composites ThermoStructuraux, UMR 5801, Université de Bordeaux, CNRS, CEA, SAFRAN, 33600 Pessac, France , Pessac, France
    Bilal CHAHHOU, Laboratoire des Composites ThermoStructuraux, UMR 5801, Université de Bordeaux, CNRS, CEA, SAFRAN, 33600 Pessac, France , Pessac, France

    person_pinJerome ROGER, Laboratoire des Composites ThermoStructuraux, UMR 5801, Université de Bordeaux, CNRS, CEA, SAFRAN, 33600 Pessac, France , Pessac, France
    18:00 - 18:15 | Wet-chemical assisted synthesis of nitride and carbonitride MAX phases Niels KUBITZA, Technische Universität Darmstadt, Darmstadt, Germany
    Christina S. BIRKEL,

    person_pinNiels KUBITZA, Technische Universität Darmstadt, Darmstadt, Germany
    18:15 - 18:30 | Continuous Al-supply in Cr2AlC MAX phase during oxidation at high temperatureClio AZINA, Materials Chemistry, RWTH Aachen University, Aachen, Germany
    Marcus HANS, Materials Chemistry, RWTH Aachen University, Aachen, Germany
    Per EKLUND, Energy Materials Unit, Thin film Physics Division, Dept. of Physics, Chemistry and Biology (IFM), Linköping University, Linköping, Sweden
    Jesus GONZALEZ JULIAN, Chair of Ceramics, Institute of Mineral Engineering, RWTH Aachen University, Aachen, Germany
    Jochen SCHNEIDER, Materials Chemistry, RWTH Aachen University, Aachen, Germany

    person_pinClio AZINA, Materials Chemistry, RWTH Aachen University, Aachen, Germany
    18:30 - 18:45 | Scalable synthesis and purification of high-yield monolayer MXene dispersions in different mediaNick GOOSSENS, Department of Materials Engineering, KU Leuven, Heverlee, Belgium
    Konstantina LAMBRINOU, School of Computing and Engineering, University of Huddersfield, Huddersfield, United Kingdom
    Jozef VLEUGELS, Department of Materials Engineering, KU Leuven, Heverlee, Belgium
    Francisco MOLINA LOPEZ, Department of Materials Engineering, KU Leuven, Heverlee, Belgium

    person_pinNick GOOSSENS, Department of Materials Engineering, KU Leuven, Heverlee, Belgium
    HL17:00 - 17:30 | To drill or not to drill? - Creep of an oxide-oxide composite with diamond-drilled effusion holes at elevated temperatureMegan HARKINS, US Air Force Institute of Technology, WPAFB, United States
    Marina RUGGLES-WRENN, US Air Force Institute of Technology, WPAFB, United States

    person_pinMarina RUGGLES-WRENN, US Air Force Institute of Technology, WPAFB, United States
    17:30 - 17:45 | Engineering damage tolerant failure modes into chemically bonded phosphate ceramic matrix compositesErin VALENZUELA-HEEGER, University of Birmingham, Birmingham, United Kingdom
    Jon BINNER, University of Birmingham, Birmingham, United Kingdom
    Chris HAWKINS, DSTL, Salisbury, United Kingdom

    person_pinErin VALENZUELA-HEEGER, University of Birmingham, Birmingham, United Kingdom
    17:45 - 18:00 | Automated Fiber Placement of High-Denier Unidirectional Ox-Ox CMC Slit-TapeWylie SIMPSON, Axiom Materials Inc, Santa Ana, United States
    Antonios TONTISAKIS, Axiom Materials Inc, Santa Ana, United States
    Joshua GOERTZ, NIAR ATLAS, Wichita, United States
    Martens ALEX, NIAR ATLAS, Wichita, United States
    Waruna SENEVIRATNE, NIAR ATLAS, Wichita, United States
    Dhawan RAJ, Axiom Materials Inc, Santa Ana, United States

    person_pinAntonios TONTISAKIS, Axiom Materials Inc, Santa Ana, United States
    18:00 - 18:15 | Slurry formulation for Ceramic Matrix Composites by tow impregnation (tow-preg)Zoé BORIUS, ONERA, Châtillon, France
    Antoine DEBARRE, ONERA, Châtillon, France
    Marc SINGLARD, IRT St-Exupéry, Talence, France
    Gilles DUSSERRE, ICA, Albi, France
    Thierry CUTARD, ICA, Albi, France
    Aurélie JULIAN-JANKOWIAK, ONERA, Châtillon, France

    person_pinZoé BORIUS, ONERA, Châtillon, France
    18:15 - 18:30 | Novel measuring method for prepreg processability of oxide fibre ceramic matrix compositesFelix LINDNER, Chair of Ceramic Materials Engineering, University of Bayreuth, Bayreuth, Germany
    Georg PUCHAS, Chair of Ceramic Materials Engineering, University of Bayreuth, Bayreuth, Germany
    Stefan SCHAFFÖNER, Chair of Ceramic Materials Engineering, University of Bayreuth, Bayreuth, Germany

    person_pinFelix LINDNER, Chair of Ceramic Materials Engineering, University of Bayreuth, Bayreuth, Germany
    18:30 - 18:45 | Synthesis of a alumina/barium aluminosilicate oxyde/oxyde composite at reduced temperature?Arnaud SAINTONGE, Thermostructural Composites Laboratory UMR 5801, Pessac, F-33600, France
    Yann LEPETITCORPS, Thermostructural Composites Laboratory UMR 5801, Pessac, F-33600, France
    Alexandre ALLEMAND , CEA CESTA, F-33116, Le Barp, France
    James BRAUN,
    Thierry PIQUERO, CEA DAM Le Ripault, F-37260, Monts, France
    Sophie BEAUDET - SAVIGNAT, CEA DAM Le Ripault, F-37260, Monts, France

    person_pinArnaud SAINTONGE, Thermostructural Composites Laboratory UMR 5801, Pessac, F-33600, France
    17:00 - 17:15 | Study of SiC-based refractory tiles compaction behaviour during shaping with modified Cam-Clay model  Audrey TIXIER,
    François VALDIVIESO, LGF - Mines Saint-Étienne, Saint-Étienne, France
    Patrick GANSTER, LGF - Mines Saint-Étienne, Saint-Étienne, France
    Hanène SOULI, LTDS - Centrale Lyon, Saint-Étienne, France
    Cyrille VARONA, BONY SAS, Saint-Étienne, France
    Emmanuel DE BILBAO, CEMHTI - CNRS, Orléans, France
    Jacques POIRIER, CEMHTI - CNRS, Orléans, France
    Jean-Michel BROSSARD, Veolia Recherche & Innovation, Limay, France

    person_pinAudrey TIXIER, LGF - Mines Saint-Étienne, Saint-Étienne, France; BONY SAS, Saint-Étienne, France; CEMHTI - CNRS, Orléans, France
    17:15 - 17:30 | Thermomechanical Properties related to Microstructural Design of Alumina/Aluminum Titanate Composite MaterialsMossaab MOUIYA,
    Nicolas TESSIER-DOYEN, University of Limoges, Institute of Research for Ceramics (IRCER), Limoges, France
    Youssef TAMRAOUI, Materials Science, Energy and Nanoengineering Department, University Mohammed VI Polytechnic (UM6P), Benguerir, Morocco
    Jean-Christophe DUPRÉ, University of Poitiers, PPRIME UPR CNRS 3346, Poitiers, France
    Pascal DOUMALIN, University of Poitiers, PPRIME UPR CNRS 3346, Poitiers, France
    Jones ALAMI, Materials Science, Energy and Nanoengineering Department, University Mohammed VI Polytechnic (UM6P), Benguerir, Morocco
    Marc HUGER, University of Limoges, Institute of Research for Ceramics (IRCER), Limoges, France

    person_pinMarc HUGER, University of Limoges, Institute of Research for Ceramics (IRCER), Limoges, France
    17:30 - 17:45 | Thermal damage modelling of the microstructure of model refractory materials by the discrete element methodQuentin PLEDEL, University of Limoges, Institute of Research for Ceramics (IRCER), UMR 7315, European Ceramics Center, Limoges, France
    Marc HUGER, University of Limoges, Institute of Research for Ceramics (IRCER), UMR 7315, European Ceramics Center, Limoges, France
    Damien ANDRÉ, University of Limoges, Institute of Research for Ceramics (IRCER), UMR 7315, European Ceramics Center, Limoges, France

    person_pinDamien ANDRÉ, University of Limoges, Institute of Research for Ceramics (IRCER), UMR 7315, European Ceramics Center, Limoges, France
    17:45 - 18:00 | Different Methods of Young's Modulus Determination and Evaluation of Refractories at High TemperaturesThorsten TONNESEN, RWTH Aachen University, Institute of Mineral Engineering (GHI), Aachen, Germany
    Michel HENZE, RWTH Aachen University, Institute of Metal Forming (IBF), Aachen, Germany
    Gerhard HIRT, RWTH Aachen University, Institute of Metal Forming (IBF), Aachen, Germany
    Jesus GONZALEZ-JULIAN, RWTH Aachen University, Institute of Mineral Engineering (GHI), Aachen, Germany

    person_pinThorsten TONNESEN, RWTH Aachen University, Institute of Mineral Engineering (GHI), Aachen, Germany
    18:00 - 18:15 | Influence of impurities on the thermomechanical behaviour of refractory high alumina cement free castablesErwan BROCHEN, Forschungsgemeinschaft Feuerfest e.V., Höhr-Grenzhausen, Germany
    Christian DANNERT, Forschungsgemeinschaft Feuerfest e.V., Höhr-Grenzhausen, Germany
    Laura ERBAR, Hochschule Koblenz: University of Applied Science, Höhr-Grenzhausen, Germany
    Katharina SARNOW, Hochschule Koblenz: University of Applied Science, Höhr-Grenzhausen, Germany
    Olaf KRAUSE, Hochschule Koblenz: University of Applied Science, Höhr-Grenzhausen, Germany
    Jacek PODWÓRNY, Łukasiewicz-Institute of Ceramics and Building Materials - Refractory Materials Center, Gliwice, Poland
    Karolina DUDEK, Łukasiewicz-Institute of Ceramics and Building Materials - Refractory Materials Center, Gliwice, Poland

    person_pinErwan BROCHEN, Forschungsgemeinschaft Feuerfest e.V., Höhr-Grenzhausen, Germany
    18:15 - 18:30 | Consolidation and mechanical behavior of a refractory ceramic in temperatureAmelie BIGEARD,
    David JAUFFRES, SIMaP, Grenoble, France
    Pierrick VESPA, Saint-Gobain Research Provence, Cavaillon, France
    Didier BOUVARD, SIMaP, Grenoble, France
    Elodie BOLLER, European Synchrotron Radiation Facility, Grenoble, France

    person_pinAmelie BIGEARD, SIMaP, Grenoble, France; Saint-Gobain Research Provence, Cavaillon, France
    18:30 - 18:45 | On the Statistics of the Mechanical Failure in Flame-Sprayed Self Supporting ComponentsMarc NEUMANN, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Magda HOLLENBACH, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Florian KERBER, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Tony WETZIG, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Christos G. ANEZIRIS, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany

    person_pinMarc NEUMANN, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    HL17:00 - 17:30 | Effects of granite waste addition on porcelain stoneware technological propertiesChiara MOLINARI, CNR - ISSMC, Faenza, Italy
    Andreea SIMA, Instituto Universitario de Tecnología Cerámica, Universidad Jaume I, Castellón , Spain
    Matteo CAVINA, Alma Mater Studiorum - Bologna University, Department of Industrial Chemistry "Toso Montanari", Bologna, Italy
    Guia GUARINI, CNR - ISSMC, Faenza, Italy
    Sonia CONTE, CNR - ISSMC, Faenza, Italy
    Stefania ALBONETTI, Alma Mater Studiorum - Bologna University, Department of Industrial Chemistry "Toso Montanari", Bologna, Italy
    Enrique SÁNCHEZ , Instituto Universitario de Tecnología Cerámica, Universidad Jaume I, Castellón , Spain
    Eugeni CAÑAS, Instituto Universitario de Tecnología Cerámica, Universidad Jaume I, Castellón , Spain
    Michele DONDI, CNR - ISSMC, Faenza, Italy
    Chiara ZANELLI, CNR - ISSMC, Faenza, Italy

    person_pinChiara MOLINARI, CNR - ISSMC, Faenza, Italy
    17:30 - 17:45 | Pre-industrial scale prototypes of ceramic wall tiles with bio-calcium carbonate from eggshell waste  Inês Silveirinha VILARINHO, CICECO – Aveiro Institute of Materials/DEMaC - Department of Materials and Ceramic Engineering, University of Aveiro, Aveiro, Portugal
    Marinelia CAPELA, CICECO – Aveiro Institute of Materials/DEMaC - Department of Materials and Ceramic Engineering, University of Aveiro, Aveiro, Portugal
    José SILVA, Mota Ceramic Solutions, Oiã, Portugal
    Sofia BATISTA, Mota Ceramic Solutions, Oiã, Portugal
    Francisca VÁSQUEZ, Instituto de Tecnología Cerámica (ITC), Asociación de Investigación de las Industrias Cerámicas (AICE), Campus Universitario Riu Sec, Castellón, Spain
    Maria Paula SEABRA, CICECO – Aveiro Institute of Materials/DEMaC - Department of Materials and Ceramic Engineering, University of Aveiro, Aveiro, Portugal

    person_pinMaria Paula SEABRA, CICECO – Aveiro Institute of Materials/DEMaC - Department of Materials and Ceramic Engineering, University of Aveiro, Aveiro, Portugal
    17:45 - 18:00 | Red mud-containing inorganic polymer sorbents: novel and effective route to depollute acid mine drainage wastewatersRui NOVAIS, Department of Materials and Ceramic Engineering / CICECO-Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    Nuno GONÇALVES, Department of Materials and Ceramic Engineering / CICECO-Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    João CARVALHEIRAS, Department of Materials and Ceramic Engineering / CICECO-Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    Tânia GAMEIRO, Department of Materials and Ceramic Engineering / CICECO-Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    João LABRINCHA, Department of Materials and Ceramic Engineering / CICECO-Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal

    person_pinRui NOVAIS, Department of Materials and Ceramic Engineering / CICECO-Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    HL17:00 - 17:30 | Defect Chemistry and electrical transport properties of Pr1-xCaxMnO3 ceramicsChristian PITHAN, Forchungszentrum Jülich GmbH, Peter Grünberg Institute PGI-7 (Electronic Materials), Jülich, Germany

    person_pinChristian PITHAN, Forchungszentrum Jülich GmbH, Peter Grünberg Institute PGI-7 (Electronic Materials), Jülich, Germany
    17:30 - 17:45 | Suppressing migration of oxygen vacancies in BaTiO3 for high-voltage, high-temperature capacitorsZhanpeng XU, University of Nottingham, Nottingham, United Kingdom
    David GRANT, University of Nottingham, Nottingham, United Kingdom
    Ming LI, University of Nottingham, Nottingham, United Kingdom

    person_pinMing LI, University of Nottingham, Nottingham, United Kingdom
    17:45 - 18:00 | Impact of transition metal oxidation states distribution on physical properties  Olivier TOULEMONDE, Institut de Chimie de la Matière Condensée de Bordeaux / Université de Bordeaux, Bordeaux, France

    person_pinOlivier TOULEMONDE, Institut de Chimie de la Matière Condensée de Bordeaux / Université de Bordeaux, Bordeaux, France
    18:00 - 18:15 | Oxygen vacancy and lattice distortion of Ni-Fe oxide catalyst for CNT growthJaekwang LEE, School of Materials science and engineering, Pusan national university, Busan, Korea (Republic of)
    Ju-Yeon HA, System & Energy Division, Korea Testing Laboratory, Seoul, Korea (Republic of)
    Hyun-Gyoo SHIN, System & Energy Division, Korea Testing Laboratory, Seoul, Korea (Republic of)
    Juyeong KIM, Department of research and development, HyMAR corporation, Busan, Korea (Republic of)
    Heesoo LEE, School of Materials science and engineering, Pusan national university, Busan, Korea (Republic of)
    Seoung-Ki LEE, School of Materials science and engineering, Pusan national university, Busan, Korea (Republic of)

    person_pinJaekwang LEE, School of Materials science and engineering, Pusan national university, Busan, Korea (Republic of)
    18:15 - 18:30 | Temperature-dependent cation distribution in NTC thermistor spinels probed with neutron diffraction and Seebeck measurementsJan DINGER, Ernst-Abbe-Hochschule Jena, Jena, Germany
    Jörg TÖPFER, Ernst-Abbe-Hochschule Jena, Jena, Germany

    person_pinJörg TÖPFER, Ernst-Abbe-Hochschule Jena, Jena, Germany
    18:30 - 18:45 | Influence of neutron and gamma irradiation on electrocaloric properties of Mn and La-doped 0.9Pb(Mg1/3Nb2/3)O3–0.1PbTiO3 ceramicsAnkita SARKAR, Jožef Stefan Institute, Ljubljana, Slovenia
    Hana URŠIC,
    AnžE JAZBEC, Jožef Stefan Institute, Ljubljana, Slovenia
    Luka SNOJ,
    Matej ŠADL,
    Silvo DRNOVŠEK, Jožef Stefan Institute, Ljubljana, Slovenia
    Barbara MALIC,

    person_pinAnkita SARKAR, Jožef Stefan Institute, Ljubljana, Slovenia
    18:45 - 19:00 | Electronic structure and charge transport in NaNbO3Nicole BEIN, Technical University of Darmstadt, Darmstadt, Germany
    Brigita KMET, Jozef-Stefan-Institute, Ljubljana, Slovenia
    Tadej ROJAC, Jozef-Stefan-Institute, Ljubljana, Slovenia
    Barbara MALIC, Jozef-Stefan-Institute, Ljubljana, Slovenia
    Azadeh MARYAM, Technical University of Darmstadt, Darmstadt, Germany
    Till FRÖMLING, Technical University of Darmstadt, Darmstadt, Germany
    Andreas KLEIN, Technical University of Darmstadt, Darmstadt, Germany

    person_pinAndreas KLEIN, Technical University of Darmstadt, Darmstadt, Germany
    17:00 - 17:15 | RAPID LASER-INDUCED CRYSTALLIZATION OF THERMOCHROMIC VO2 THIN FILMS  Maria BASSO,
    Elena COLUSSO, University of Padova - Department of Industrial Engineering, Padova, Italy
    Chiara CARRARO, University of Padova - Department of Physics and Astronomy, Padova, Italy
    Enrico NAPOLITANI, University of Padova - Department of Physics and Astronomy, Padova, Italy
    Anna REGOUTZ, Department of Chemistry - University College London, London, United Kingdom
    Alessandro MARTUCCI, University of Padova - Department of Industrial Engineering, Padova, Italy

    person_pinElena COLUSSO, University of Padova - Department of Industrial Engineering, Padova, Italy
    17:15 - 17:30 | Preparation of nanostructured SnO2 thin-films as efficient electron transport layers for perovskite solar cellsArijeta BAFTI, University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, Croatia
    Ivana PANŽIC, University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, Croatia
    Luka PAVIC, Ruđer Bošković Institute, Zagreb, Croatia
    Vilko MANDIC, University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, Croatia

    person_pinArijeta BAFTI, University of Zagreb, Faculty of Chemical Engineering and Technology, Zagreb, Croatia
    17:30 - 17:45 | Titanium dioxide-based ceramic nanoparticles for photocatalytic degradation of microplastics  Erika Iveth CEDILLO-GONZALEZ,
    Maria Camila ARIZA-TARAZONA, University of Modena and Reggio Emilia, Modena, Italy
    Cristina SILIGARDI,

    person_pinErika Iveth CEDILLO-GONZALEZ, University of Modena and Reggio Emilia, Modena, Italy; National Interuniversity Consortium of Materials Science and Technology (INSTM), Florence, Italy
    17:45 - 18:00 | Sound velocities of porous oxide and silicate ceramics – from theoretical predictions to experimental resultsPetra ŠIMONOVÁ, Department of Glass and Ceramics, University of Chemistry and Technology, Prague, Czechia
    Willi PABST, Department of Glass and Ceramics, University of Chemistry and Technology, Prague, Czechia

    person_pinPetra ŠIMONOVÁ, Department of Glass and Ceramics, University of Chemistry and Technology, Prague, Czechia
    18:00 - 18:15 | Feasible Synthesis of Rare Earth-Free Zinc Silicate-Based CeramicsJallouli NECIB, Department of Mechanical and Industrial Engineering, Tallinn University of Technology, Ehitajate 5, 19180 , Tallinn, Estonia
    Rocío Estefanía ROJAS-HERNANDEZ, Department of Mechanical and Industrial Engineering, Tallinn University of Technology, Ehitajate 5, 19180 , Tallinn, Estonia
    Fernando RUBIO-MARCOS, Electroceramic Department, Instituto de Cerámica y Vidrio, CSIC, Kelsen 5, 28049, Madrid, Spain
    Irina HUSSAINOVA, Department of Mechanical and Industrial Engineering, Tallinn University of Technology, Ehitajate 5, 19180 , Tallinn, Estonia
    José Francisco FERNANDEZ, Electroceramic Department, Instituto de Cerámica y Vidrio, CSIC, Kelsen 5, 28049, Madrid, Spain
    Eduard FELDBACH , Institute of Physics, University of Tartu, W. Ostwald Str 1, 50411, Tartu, Estonia

    person_pinJallouli NECIB, Department of Mechanical and Industrial Engineering, Tallinn University of Technology, Ehitajate 5, 19180 , Tallinn, Estonia
    HL17:00 - 17:30 | Development of ytterbium disilicate-based environmental barrier coatings by thermal spray methods  Robert VAßEN, Forschungszentrum Jülich GmbH, IEK-1, Jülich, Germany
    Emine BAKAN, Forschungszentrum Jülich GmbH, IEK-1, Jülich, Germany
    Edward GILDERSLEEVE, Forschungszentrum Jülich GmbH, IEK-1, Jülich, Germany
    Dapeng ZHOU, Forschungszentrum Jülich GmbH, IEK-1, Jülich, Germany
    Dmitry NAUMENKO, Forschungszentrum Jülich GmbH, IEK-2, Jülich, Germany
    Olivier GUILLON, Forschungszentrum Jülich GmbH, IEK-1, Jülich, Germany

    person_pinRobert VAßEN, Forschungszentrum Jülich GmbH, IEK-1, Jülich, Germany
    17:30 - 17:45 | Enhancing and understanding the H2O/CO2 coelectrolysis process in SOECs modified with the nanoparticles of the transition metalsPatryk BLASZCZAK, Advanced Materials Center, Institute of Nanotechnology and Materials Engineering, Faculty of Applied Physics and Mathematics, Gdansk University of Technology, 80-233 Gdańsk, ul. Narutowicza 11/12, Poland, Gdańsk, Poland
    Agata DUCKA, Advanced Materials Center, Institute of Nanotechnology and Materials Engineering, Faculty of Applied Physics and Mathematics, Gdansk University of Technology, 80-233 Gdańsk, ul. Narutowicza 11/12, Poland, Gdańsk, Poland
    Krzysztof MATLAK, National Synchrotron Radiation Centre SOLARIS, Jagiellonian University, Czerwone Maki 98, 30-392 Kraków, Poland, Kraków, Poland
    Barbara WOLANIN, National Synchrotron Radiation Centre SOLARIS, Jagiellonian University, Czerwone Maki 98, 30-392 Kraków, Poland, Kraków, Poland
    Bretislav ŠMÍD, Department of Surface and Plasma Science, Faculty of Mathematics and Physics, Charles University, V Holešovičkách 747/2, Prague 8, CZ-180 00 Prague, Czech Republic, Praha, Czechia
    Alessandro PURI, CNR-IOM-OGG c/o ESRF-The European Synchrotron, 71 Avenue des Martyrs, 38000 Grenoble, France, Grenoble, France
    Wang SEA-FUE, Department of Materials and Mineral Resources Engineering, National Taipei University of Technology, 1, Sec. 3, Zhongxiao E. Rd., Taipei, 106 Taiwan, Taipei, Taiwan
    Beata BOCHENTYN, Advanced Materials Center, Institute of Nanotechnology and Materials Engineering, Faculty of Applied Physics and Mathematics, Gdansk University of Technology, 80-233 Gdańsk, ul. Narutowicza 11/12, Poland, Gdańsk, Poland
    Piotr JASINSKI, Adavanced Materials Center, Faculty of Electronics, Telecommunications and Informatics, Gdansk University of Technology, 80-233 Gdańsk, ul. Narutowicza 11/12, Poland, Gdańsk, Poland

    person_pinPatryk BLASZCZAK, Advanced Materials Center, Institute of Nanotechnology and Materials Engineering, Faculty of Applied Physics and Mathematics, Gdansk University of Technology, 80-233 Gdańsk, ul. Narutowicza 11/12, Poland, Gdańsk, Poland
    17:45 - 18:00 | Precursor Design for Metal Chalcogenide Nanofilms as Catalysts for HER in Electrochemical Water Splitting.David PATRUN, University of Cologne, Cologne, Germany
    Lasse JÜRGENSEN, University of Cologne, Cologne, Germany
    Thomas FISCHER, University of Cologne, Cologne, Germany
    Ziyaad AYTUNA, University of Cologne, Cologne, Germany
    Sanjay MATHUR, University of Cologne, Cologne, Germany

    person_pinDavid PATRUN, University of Cologne, Cologne, Germany
    18:00 - 18:15 | Metal Alkoxides Derived High Entropy Oxides: A Design Strategy For Efficient Oxygen Evolution Reaction (OER) ElectrocatalystsZiyaad AYTUNA, University of Cologne, Institute of Inorganic Chemistry, Cologne, Germany
    Aman BHARDWAJ, University of Cologne, Institute of Inorganic Chemistry, Cologne, Germany
    Michael WILHELM, University of Cologne, Institute of Inorganic Chemistry, Cologne, Germany
    Sanjay MATHUR, University of Cologne, Institute of Inorganic Chemistry, Cologne, Germany

    person_pinZiyaad AYTUNA, University of Cologne, Institute of Inorganic Chemistry, Cologne, Germany
    HL17:00 - 17:30 | Ceramic finger joint implants: AI designed and manufactured by direct shaping methodsDaniel SCHUMACHER, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Hermsdorf, Germany
    Sabine BEGAND, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Hermsdorf, Germany
    Eveline ZSCHIPPANG, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden, Germany
    Eric SCHWARZER-FISCHER, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden, Germany

    person_pinDaniel SCHUMACHER, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Hermsdorf, Germany
    17:30 - 17:45 | Effect of architecture topology on the properties of YSZ scaffolds for bone regeneration by filament extrusion 3D printingVictoria AXELRAD TINOCO, Universidad de Castilla-La Mancha E.T.S.I. INDUSTRIAL – INEI | Avda. Camilo Jose Cela s/n 13071 Ciudad Real, Ciudad Real, Spain
    Javier HIDALGO, Universidad de Castilla-La Mancha E.T.S.I. INDUSTRIAL – INEI | Avda. Camilo Jose Cela s/n 13071 Ciudad Real, Ciudad Real, Spain
    Cristina BERGES, Universidad de Castilla-La Mancha E.T.S.I. INDUSTRIAL – INEI | Avda. Camilo Jose Cela s/n 13071 Ciudad Real, Ciudad Real, Spain
    Juan Alfonso NARANJO, Universidad de Castilla-La Mancha E.T.S.I. INDUSTRIAL – INEI | Avda. Camilo Jose Cela s/n 13071 Ciudad Real, Ciudad Real, Spain
    Gemma HERRANZ, Universidad de Castilla-La Mancha E.T.S.I. INDUSTRIAL – INEI | Avda. Camilo Jose Cela s/n 13071 Ciudad Real, Ciudad Real, Spain

    person_pinVictoria AXELRAD TINOCO, Universidad de Castilla-La Mancha E.T.S.I. INDUSTRIAL – INEI | Avda. Camilo Jose Cela s/n 13071 Ciudad Real, Ciudad Real, Spain
    Javier HIDALGO, Universidad de Castilla-La Mancha E.T.S.I. INDUSTRIAL – INEI | Avda. Camilo Jose Cela s/n 13071 Ciudad Real, Ciudad Real, Spain
    17:45 - 18:00 | Lithographic additive manufacturing of defined open-porous scaffolds from tricalcium phosphate and hydroxyapatite  Martin SCHWENTENWEIN, Lithoz GmbH, Vienna, Austria
    Daniel BOMZE, Lithoz GmbH, Vienna, Austria

    person_pinMartin SCHWENTENWEIN, Lithoz GmbH, Vienna, Austria
    18:00 - 18:15 | Micro and nanoarchitecture of 3D printed ceramic scaffolds for osteoconduction and bone augmentation.  Franz E. WEBER, University of Zurich, Center Dental Medicine, Oral Biotechnology & Bioengineering, Zurich, Switzerland

    person_pinFranz E. WEBER, University of Zurich, Center Dental Medicine, Oral Biotechnology & Bioengineering, Zurich, Switzerland
    18:15 - 18:30 | Effect of a Ball milling Treatment on mechanical and in vitro biological properties of Bioactive Glass-Hydroxyapatite compositesDamiano ANGIONI, Dip. Ing. Meccanica, Chimica e dei Materiali, University of Cagliari, Italy, Cagliari, Italy
    Roberto ORRU', Dip. Ing. Meccanica, Chimica e dei Materiali, University of Cagliari, Italy, Cagliari, Italy
    Giacomo CAO, Dip. Ing. Meccanica, Chimica e dei Materiali, University of Cagliari, Italy, Cagliari, Italy
    Devis BELLUCCI, Dipartimento di Ingegneria “Enzo Ferrari”, University of Modena and Reggio Emilia, Italy, Modena, Italy
    Valeria CANNILLO, Dipartimento di Ingegneria “Enzo Ferrari”, University of Modena and Reggio Emilia, Italy, Modena, Italy

    person_pinRoberto ORRU', Dip. Ing. Meccanica, Chimica e dei Materiali, University of Cagliari, Italy, Cagliari, Italy
    18:30 - 18:45 | Calcium phosphate bioceramics fabricated by 3D-printing. Current advances and issuesMehdi MOHAMMADI, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
    Bartolomeo COPPOLA, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
    Elisa FIUME, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
    Laura MONTANARO, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
    Jean-Marc TULLIANI, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
    Paola PALMERO, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy

    person_pinPaola PALMERO, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
    18:45 - 19:00 | Bone tissue engineering challenging: Mimicking human bone architecture  Paul DANTY, University Limoges, CNRS IRCER, UMR 7315, Limoges, France
    Amandine MAGNAUDEIX , University Limoges, CNRS IRCER, UMR 7315, Limoges, France
    Emeline RENAUDIE, University Limoges, CNRS IRCER, UMR 7315, Limoges, France
    Fanny LEBORGNE, Pprime Institute, CNRS, UPR 3346, Poitiers, France
    Vincent PATELOUP, University Limoges, CNRS IRCER, UMR 7315, Limoges, France
    Valéry VALLÉ, Pprime Institute, CNRS, UPR 3346, Poitiers, France
    Eric CHAMPION, University Limoges, CNRS IRCER, UMR 7315, Limoges, France
    Patricia PASCAUD-MATHIEU, University Limoges, CNRS IRCER, UMR 7315, Limoges, France

    person_pinPaul DANTY, University Limoges, CNRS IRCER, UMR 7315, Limoges, France
    17:00 - 17:30 | About the exchange-bias feature in magnetically contrasted oxide-based SPSed nanoconsolidatesThomas GAUDISSON, Université Paris Cité, Paris, France
    Nancy FLORES, Université Paris Cité, Paris, France
    Giulia FRANCESCHIN, Université Paris Cité, Paris, France
    Sophie NOWAK, Université Paris Cité, Paris, France
    Souad AMMAR, Université Paris Cité, Paris, France

    person_pinSouad AMMAR, Université Paris Cité, Paris, France
    17:30 - 18:00 | Perspectives on functionally graded ceramicsOmer VAN DER BIEST, Department of Materials Engineering, KU Leuven, Leuven, Belgium

    person_pinOmer VAN DER BIEST, Department of Materials Engineering, KU Leuven, Leuven, Belgium
    18:00 - 18:30 | Routes for deriving nanostructured ceramics suitable for smart materialsVilko MANDIC, Faculty of Chemical Engineering and Technology, University of Zagreb, Zagreb, Croatia
    Ivana PANŽIC, Materials Center Leoben Forschung GmbH, Leoben, Austria

    person_pinVilko MANDIC, Faculty of Chemical Engineering and Technology, University of Zagreb, Zagreb, Croatia
    18:30 - 19:00 | Transparent ceramic materials: enabling new and multifunctional optical and photonic applicationsYiquan WU, New York State College of Ceramics, Alfred University , Alfred , United States

    person_pinYiquan WU, New York State College of Ceramics, Alfred University , Alfred , United States

    calendar_today TUE. 04/07

    K08:30 - 09:00 | 3D printing of ceramics with locally controlled microstructureHortense LE FERRAND, Nanyang Technological University, Singapore, Singapore

    person_pinHortense LE FERRAND, Nanyang Technological University, Singapore, Singapore
    09:00 - 09:15 | UV-assisted 3D shaping of single-phase ceramics and compositesJoanna TANSKA, Faculty of Chemistry, Warsaw University of Technology, Warsaw, Poland
    Radoslaw ZUROWSKI, Faculty of Chemistry, Warsaw University of Technology, Warsaw, Poland
    Anna WIECLAW-MIDOR, Faculty of Chemistry, Warsaw University of Technology, Warsaw, Poland
    Piotr WIECINSKI, Faculty of Chemistry, Warsaw University of Technology, Warsaw, Poland
    Pawel FALKOWSKI, Faculty of Chemistry, Warsaw University of Technology, Warsaw, Poland
    Paulina WIECINSKA, Faculty of Chemistry, Warsaw University of Technology, Warsaw, Poland

    person_pinJoanna TANSKA, Faculty of Chemistry, Warsaw University of Technology, Warsaw, Poland
    09:15 - 09:30 | Hybrid formulations of Pickering emulsions/suspensions based on natural clay for 3D printing of porous ceramicsLoïc MATHIEU, IRCER, Limoges, France
    Anne AIMABLE, IRCER, Limoges, France
    Julie BOURRET, IRCER, Limoges, France
    Cécile PAGNOUX, IRCER, Limoges, France
    Vincent PATELOUP, IRCER, Limoges, France

    person_pinLoïc MATHIEU, IRCER, Limoges, France
    09:30 - 09:45 | Influence of second phases in 3D-printed CeO2-stabilized zirconia composite ceramicsElisa FIUME, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino. , TORINO, Italy
    Barbara INSERRA, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino. , TORINO, Italy
    Bartolomeo COPPOLA, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino. , TORINO, Italy
    Laura MONTANARO, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino. , TORINO, Italy
    Jean Marc TULLIANI, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino. , TORINO, Italy
    Paola PALMERO, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino. , TORINO, Italy

    person_pinElisa FIUME, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino. , TORINO, Italy
    09:45 - 10:00 | Bioceramic-Carbon Composite Scaffolds from Masked Stereolithography of Silicone-based BlendsElsayed HAMADA , Department of Industrial Engineering, University of Padova, Padova, Italy
    Stabile FRANCO MATIAS, CETMIC, La Plata, Argentina
    Cimetta ELISA, Department of Industrial Engineering, University of Padova, Padova, Italy
    Enrico BERNARDO, Department of Industrial Engineering, University of Padova, Padova, Italy

    person_pinEnrico BERNARDO, Department of Industrial Engineering, University of Padova, Padova, Italy
    10:00 - 10:15 | Digital printing of nanoinks on glass-containing materials and surfacesMihails KUSNEZOFF, Fraunhofer IKTS, Dresden, Germany
    Marco FRITSCH, Fraunhofer IKTS, Dresden, Germany
    Sindy MOSCH, Fraunhofer IKTS, Dresden, Germany
    Nikolai TROFIMENKO, Fraunhofer IKTS, Dresden, Germany

    person_pinMihails KUSNEZOFF, Fraunhofer IKTS, Dresden, Germany
    10:15 - 10:30 | Pellet-based Fused Deposition Modeling of polycarbosilanes towards on-demand 3D silicon carbide-based objectsMaxime CHEYPE, Institute of Research for Ceramics, Limoges, France
    Fabrice ROSSIGNOL, Institute of Research for Ceramics, Limoges, France
    Vincent PATELOUP, Institute of Research for Ceramics, Limoges, France
    Samuel BERNARD, Institute of Research for Ceramics, Limoges, France

    person_pinMaxime CHEYPE, Institute of Research for Ceramics, Limoges, France
    K08:30 - 09:00 | Sintering-Assisted Additive Manufacturing TechnologiesEugene OLEVSKY, San Diego State University, San Diego, United States

    person_pinEugene OLEVSKY, San Diego State University, San Diego, United States
    09:00 - 09:15 | Transparent and translucent structural and functional ceramics prepared by HIP and SPSKarel MACA, Brno University of Technology, Brno, Czechia
    Katarína DRDLÍKOVÁ, Brno University of Technology, Brno, Czechia
    Daniel DRDLÍK, Brno University of Technology, Brno, Czechia
    Vijay BIJALWAN, Brno University of Technology, Brno, Czechia
    Róbert KLEMENT, Funglass Centre of Excellence, Trenčín, Slovakia
    DušAn GALUSEK, Funglass Centre of Excellence, Trenčín, Slovakia

    person_pinKarel MACA, Brno University of Technology, Brno, Czechia
    09:15 - 09:30 | Influence of LiF doping and Spark Plasma Sintering parameters on tricalcium phosphate transparencyMalgorzata GUZIK,
    Kacper PROKOP,
    Sandrine COTTRINO, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR 5510, 7 avenue Jean Capelle, 69621, Villeurbanne, Lyon, France
    Vincent GARNIER, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR 5510, 7 avenue Jean Capelle, 69621, Villeurbanne, Lyon, France
    Gilbert FANTOZZI, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR 5510, 7 avenue Jean Capelle, 69621, Villeurbanne, Lyon, France
    Yannick GUYOT, Univ Lyon, Institute Light Matter (iLM), UMR 5306 CNRS-Claude Bernard/Lyon1 University, 69622 Villeurbanne, Lyon, France
    Georges BOULON, Univ Lyon, Institute Light Matter (iLM), UMR 5306 CNRS-Claude Bernard/Lyon1 University, 69622 Villeurbanne, Lyon, France

    person_pinKacper PROKOP, University of Wrocław, Faculty of Chemistry, ul. F. Joliot-Curie 14, 50-383 , Wrocław, Poland; Łukasiewicz Research Network - PORT Polish Center for Technology Development, ul. 147 Stablowicka, 54-066 , Wrocław, Poland
    09:30 - 09:45 | Additive Manufacturing and Spark Plasma Sintering: Fabrication of Powder Components with Internal ChannelsElisa TORRESANI, San Diego State University, San Diego, United States
    Maricruz CARRILLO, San Diego State University, San Diego, United States
    Eugene OLEVSKY, San Diego State University, San Diego, United States
    Chris HAINES, US Army DEVCOM - Army Research Laboratory, Aberdeen Proving Ground, United States
    Darold MARTIN, US Army DEVCOM – Armaments Center, Picatinny Arsenal, United States

    person_pinElisa TORRESANI, San Diego State University, San Diego, United States
    09:45 - 10:00 | Targeting a specific SPS sintering window to densify tetragonal ZrO2 in one step: chemistry and experimental parameters interplayU-Chan CHUNG, Univ. Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    Etienne MARTIN, Univ. Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    Maria-Isabel RUA-TABORDA, Univ. Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    Sébastien FOURCADE, Univ. Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    Christine LABRUGÈRE-SARROSTE, Univ. Bordeaux, CNRS, PLACAMAT, UAR 3626, F-33600, Pessac, France
    Dominique MICHAU, Univ. Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    Guillaume CLERMONT, Univ. Bordeaux, CNRS, Bordeaux INP, ISM, UMR 5255, F-33400, Talence, France
    Marie-Anne DOURGES, Univ. Bordeaux, CNRS, Bordeaux INP, ISM, UMR 5255, F-33400, Talence, France
    Mathieu DUTTINE, Univ. Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    Fabrice MAUVY, Univ. Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    Mario MAGLIONE, Univ. Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    Graziella GOGLIO, Univ. Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    Catherine ELISSALDE, Univ. Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France

    person_pinU-Chan CHUNG, Univ. Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    10:00 - 10:15 | An in-depth investigation by Raman, TEM and Impedance Spectroscopy of Field-assisted sintered Barium Strontium Titanate ceramicsCamila RIBEIRO, Department of Materials and Ceramic Engineering, CICECO – Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    Alexander TKACH, Department of Materials and Ceramic Engineering, CICECO – Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    Fátima ZORRO, International Iberian Nanotechnology Laboratory - INL, Braga, Portugal
    Paulo FERREIRA, International Iberian Nanotechnology Laboratory - INL, Braga, Portugal
    Jacques NOUDEM, Normandie Univ, ENSICAEN, UNICAEN, CNRS, CRISMAT, Caen, France
    Rui VILARINHO, IFIMUP, Department of Physics and Astronomy, Faculty of Sciences, University of Porto, Porto, Portugal
    Mariana M. GOMES, IFIMUP, Department of Physics and Astronomy, Faculty of Sciences, University of Porto, Porto, Portugal
    J. Agostinho MOREIRA, IFIMUP, Department of Physics and Astronomy, Faculty of Sciences, University of Porto, Porto, Portugal
    M. Elisabete COSTA, Department of Materials and Ceramic Engineering, CICECO – Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    Paula VILARINHO, Department of Materials and Ceramic Engineering, CICECO – Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal

    person_pinCamila RIBEIRO, Department of Materials and Ceramic Engineering, CICECO – Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    10:15 - 10:30 | Optimizing nanostructure of Yttria-Stabilized Zirconia (YSZ) using low-temperature sintering processesJulien DE LANDTSHEER, CIRIMAT, CNRS-INP-UPS, Université TOULOUSE III-Paul Sabatier, 118 Route de Narbonne, 31062, Toulouse, France
    Thomas HERISSON DE BEAUVOIR, CIRIMAT, CNRS-INP-UPS, Université TOULOUSE III-Paul Sabatier, 118 Route de Narbonne, 31062, Toulouse, France
    Alicia WEIBEL, CIRIMAT, CNRS-INP-UPS, Université TOULOUSE III-Paul Sabatier, 118 Route de Narbonne, 31062, Toulouse, France
    Geoffroy CHEVALLIER, CIRIMAT, CNRS-INP-UPS, Université TOULOUSE III-Paul Sabatier, 118 Route de Narbonne, 31062, Toulouse, France
    Matthew SUCHOMEL, Université de Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    Graziella GOGLIO, Université de Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    Gilles PHILIPPOT, Université de Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    Yoan DENIS, Université de Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    Helen REVERON, Université de Lyon, INSA de Lyon, Université Claude Bernard Lyon 1, CNRS, MATEIS, UMR5510,69621, Villeurbanne, France
    Jérôme CHEVALIER, Université de Lyon, INSA de Lyon, Université Claude Bernard Lyon 1, CNRS, MATEIS, UMR5510,69621, Villeurbanne, France
    Catherine ELISSALDE, Université de Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, F-33600, Pessac, France
    Claude ESTOURNES, CIRIMAT, CNRS-INP-UPS, Université TOULOUSE III-Paul Sabatier, 118 Route de Narbonne, 31062, Toulouse, France

    person_pinJulien DE LANDTSHEER, CIRIMAT, CNRS-INP-UPS, Université TOULOUSE III-Paul Sabatier, 118 Route de Narbonne, 31062, Toulouse, France
    K08:30 - 09:00 | 3D printing of reaction-bonded silicon carbide: from lab experiments to serial productionPhilipp GINGTER, Schunk Ingenieurkeramik GmbH, Willich, Germany
    Clara MINAS-PAYAMYAR, Schunk Ingenieurkeramik GmbH, Willich, Germany
    Lars SCHNETTER, Schunk Ingenieurkeramik GmbH, Willich, Germany
    Joachim HEYM, Schunk Ingenieurkeramik GmbH, Willich, Germany

    person_pinPhilipp GINGTER, Schunk Ingenieurkeramik GmbH, Willich, Germany
    09:00 - 09:15 | From research to industry: the evolution of ceramic 3D printing and concrete success storiesArnaud ROUX, 3DCeram Sinto, Bonnac La Côte, France

    person_pinArnaud ROUX, 3DCeram Sinto, Bonnac La Côte, France
    09:15 - 09:30 | Multi-material printing of reaction-bonded carbides by robocasting  Larissa WAHL, Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen, Germany
    Nahum TRAVITZKY, Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen, Germany

    person_pinLarissa WAHL, Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen, Germany
    09:30 - 09:45 | Green density improvement of SiC BJ printed parts by infusion assisted method with formation of hierarchical RBSiC microstructureDenis ZOLOTARYOV, The Israel Institute of Materials Manufacturing Technologies, Technion R&D Foundation, Haifa, Israel
    Muller GARY , The Israel Institute of Materials Manufacturing Technologies, Technion R&D Foundation, Haifa, Israel
    Fiks DAVID, Israel Ceramic and Silicate Institute, Haifa, Israel
    Kazakin MICHAEL , The Israel Institute of Materials Manufacturing Technologies, Technion R&D Foundation, Haifa, Israel
    Kenig SAMUEL, Israel Plastics and Rubber Center, Ramat Gan, Israel

    person_pinDenis ZOLOTARYOV, The Israel Institute of Materials Manufacturing Technologies, Technion R&D Foundation, Haifa, Israel
    09:45 - 10:00 | Thermally assisted extrusion-based 3D printing of continuous carbon fiber-reinforced SiC compositesSai LI, Xi’an Jiaotong University, Xi’an, China
    Zhongliang LU, Xi’an Jiaotong University, Xi’an, China
    Kai MIAO, Xi’an Jiaotong University, Xi’an, China

    person_pinSai LI, Xi’an Jiaotong University, Xi’an, China
    10:00 - 10:15 | Zetamix : 3D printing of technical ceramic by Fused Filament FabricationGuillaume DE CALAN,
    Romain FAYE,
    Julien SOURICE,
    Guillaume BOUCHET,

    person_pinGuillaume DE CALAN, ZETAMIX, Palaiseau, France; NANOE, Ballainvilliers, France
    10:15 - 10:30 | Ceramic Additive Manufacturing as a service: the easiest way to use and adopt ceramic 3D printing. Vincent POIRIER, CEO NOVADDITIVE  Vincent POIRIER, NOVADDITIVE, Tarbes, France

    person_pinVincent POIRIER, NOVADDITIVE, Tarbes, France
    HL08:30 - 09:00 | Accelerated Development of New Accident-Tolerant Fuel (ATF) Cladding Materials using Binary (SiC) & Ternary (MAX Phases) CarbidesKonstantina LAMBRINOU, University of Huddersfield, Huddersfield, United Kingdom
    Christophe LORRETTE, CEA, Gif-sur-Yvette Cedex, France
    Edward LAHODA, Westinghouse Electric Company LLC, Pittsburg, United States
    Tatsuya HINOKI, Kyoto University, Kyoto, Japan
    Monica FERRARIS, Politecnico di Torino (POLITO), Torino, Italy
    James MARROW, University of Oxford, Oxford, United Kingdom
    Rik-Wouter BOSCH, SCK CEN, Mol, Belgium
    Mirco GROSSE, KIT, Eggenstein-Leopoldshafen, Germany
    Philippe GOUAT, SCK CEN, Mol, Belgium
    Moritz TO BABEN, GTT-Technologies, Herzogenrath, Germany
    Jochen SCHNEIDER, RWTH Aachen University, Aachen , Germany
    Jonathan HINKS, University of Huddersfield, Huddersfield, United Kingdom
    Per PERSSON, Linköping University, Linköping , Sweden
    Jozef VLEUGELS, KU Leuven, Leuven, Belgium

    person_pinKonstantina LAMBRINOU, University of Huddersfield, Huddersfield, United Kingdom
    09:00 - 09:15 | High temperature wear resistant, electroconductive, stabile in oxygen and hydrogen environments Ti-Al-C MAX phases coatingsTetiana PRIKHNA,
    Orest OSTASH, Karpenko Physical-Mechanical Institute of the National Academy of Sciences of Ukraine, 5 Naukova St., Lviv, 79060, Ukraine, Lviv, Ukraine
    Alexander KUPRIN, National Science Center Kharkiv Institute of Physics and Technology, 1, Akademicheskaya St., Kharkov, 61108, Ukraine, Kharkiv, Ukraine
    Viktoriya PODHURSKA, Karpenko Physical-Mechanical Institute of the National Academy of Sciences of Ukraine, 5 Naukova St., Lviv, 79060, Ukraine, Lviv, Ukraine
    Volodymyr SVERDUN, Institute for Superhard Materials of the National Academy of Sciences of Ukraine, Kyiv, Ukraine
    Tetiana SERBENYUK, Institute for Superhard Materials of the National Academy of Sciences of Ukraine, Kyiv, Ukraine
    Bernd BÜCHNER, Leibniz-Institut für Festkörper- und Werkstoffforschung Dresden e. V. Helmholtzstraße 20, Dresden 01069, Germany, Dresden, Germany
    Julia HUFENBACH, Leibniz-Institut für Festkörper- und Werkstoffforschung Dresden e. V. Helmholtzstraße 20, Dresden 01069, Germany, Dresden, Germany

    person_pinTetiana PRIKHNA, Institute for Superhard Materials of the National Academy of Sciences of Ukraine, Kyiv, Ukraine; Leibniz-Institut für Festkörper- und Werkstoffforschung Dresden e. V. Helmholtzstraße 20, Dresden 01069, Germany, Dresden, Germany
    09:15 - 09:30 | Solid-state reaction synthesis of TAC-type MAX phases to form dense coatings at room temperature by Aerosol Deposition methodOscar ROJAS, CTTC -Centre de Transfert de Technologies Céramiques, Limoges, France
    Laurence BOYER, CTTC -Centre de Transfert de Technologies Céramiques, Limoges, France
    Olivier DURAND, CTTC -Centre de Transfert de Technologies Céramiques, Limoges, France
    Pierre SALLOT, Safran Tech, Materials and Processes, Châteaufort, France

    person_pinOscar ROJAS, CTTC -Centre de Transfert de Technologies Céramiques, Limoges, France
    09:30 - 09:45 | Deviations between film and target compositions during magnetron sputtering from M2-Al-C (M = Cr, Zr, and Hf) composite targetsYu-Ping CHIEN, Materials Chemistry, RWTH Aachen University, Aachen, Germany
    Stanislav MRAZ, Materials Chemistry, RWTH Aachen University, Aachen, Germany
    Matej FEKETE, Materials Chemistry, RWTH Aachen University, Aachen, Germany
    Marcus HANS, Materials Chemistry, RWTH Aachen University, Aachen, Germany
    Daniel PRIMETZHOFER, Department of Physics and Astronomy, Uppsala University, Uppsala, Sweden
    Szilard KOLOZSVARI, Plansee Composite Materials GmbH, Lechbruck am See, Germany
    Peter POLCIK, Plansee Composite Materials GmbH, Lechbruck am See, Germany
    Jochen SCHNEIDER, Materials Chemistry, RWTH Aachen University, Aachen, Germany

    person_pinYu-Ping CHIEN, Materials Chemistry, RWTH Aachen University, Aachen, Germany
    09:45 - 10:00 | Structure and properties of TiNbVTaZrHf-xN coatings deposited by reactive DC magnetron  and High Target Utilization SputteringFrantišEk LOFAJ, Institute of Materials Research of SAS, Kosice, Slovakia
    Lenka KVETKOVÁ, Institute of Materials Research of SAS, Kosice, Slovakia
    Petra HVIŠCOVÁ, Institute of Materials Research of SAS, Kosice, Slovakia
    Margita KABÁTOVÁ, Institute of Materials Research of SAS, Kosice, Slovakia
    Tomáš ROCH, Faculty of Physics, Mathematics and Informatics, Comenius University in Bratislava, Bratislava, Slovakia
    Tomáš FIANTOK, Faculty of Physics, Mathematics and Informatics, Comenius University in Bratislava, Bratislava, Slovakia
    Vladimír GIRMAN, Faculty of Science, Pavol Jozef Šafárik University in Košice, Kosice, Slovakia

    person_pinFrantišEk LOFAJ, Institute of Materials Research of SAS, Kosice, Slovakia
    10:00 - 10:15 | Solid solution mechanism in sintering of (ZrTiTaV)C high-entropy carbideChong WEI, Northwestern Polytechnical University, XI'AN, China
    Biao PENG, Northwestern Polytechnical University, XI'AN, China
    Cheng ZHANG, Northwestern Polytechnical University, XI'AN, China
    Xiaoqiang LI, Northwestern Polytechnical University, XI'AN, China

    person_pinChong WEI, Northwestern Polytechnical University, XI'AN, China
    10:15 - 10:30 | Microstructure, mechanical and wear characteristics of dual-phase high-entropy ceramic  Annamaria NAUGHTON DUSZOVA, The Institute of Materials Research, Slovak Academy of Sciences, Kosice, Slovakia

    person_pinAnnamaria NAUGHTON DUSZOVA, The Institute of Materials Research, Slovak Academy of Sciences, Kosice, Slovakia
    HL08:30 - 09:00 | Microstructural and mechanical properties of different ultra-high temperature CMCs: tensile and flexural strength up to 1800°CPietro GALIZIA, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics (CNR - ISSMC; former ISTEC), , Faenza, Italy
    Diletta SCITI, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics (CNR - ISSMC; former ISTEC), , Faenza, Italy
    Jon BINNER, School of Metallurgy and Materials - University of Birmingham, Birmingham, United Kingdom
    Vinothini VENKATACHALAM, School of Metallurgy and Materials - University of Birmingham, Birmingham, United Kingdom
    Miguel. A. LAGOS ANGEL, TECNALIA, Basque Research and Technology Alliance (BRTA), Donostia-San Sebastián, Spain
    Francesca SERVADEI, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics (CNR - ISSMC; former ISTEC), , Faenza, Italy
    Antonio VINCI, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics (CNR - ISSMC; former ISTEC), , Faenza, Italy
    Luca ZOLI, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics (CNR - ISSMC; former ISTEC), , Faenza, Italy
    Thomas REIMER, DLR German Aerospace Center, Institute of Structures and Design, Stuttgart, Germany

    person_pinPietro GALIZIA, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics (CNR - ISSMC; former ISTEC), , Faenza, Italy
    09:00 - 09:15 | Advanced hierarchical biomorphous silicon carbidesPatrizia HOFFMANN, Universität Erlangen-Nürnberg Institute of Glass and Ceramics, 91058 Erlangen, Germany
    Tobias FEY, Universität Erlangen-Nürnberg Institute of Glass and Ceramics, 91058 Erlangen, Germany

    person_pinPatrizia HOFFMANN, Universität Erlangen-Nürnberg Institute of Glass and Ceramics, 91058 Erlangen, Germany
    09:15 - 09:30 | Tribological studies of low wear CMC friction pairings compared to a standard friction pairingThorsten OPEL, Chair of Ceramic Materials Engineering, University of Bayreuth, Bayreuth, Germany
    Nico LANGHOF, Chair of Ceramic Materials Engineering, University of Bayreuth, Bayreuth, Germany
    Walter KRENKEL, Chair of Ceramic Materials Engineering, University of Bayreuth, Bayreuth, Germany
    Stefan SCHAFFÖNER, Chair of Ceramic Materials Engineering, University of Bayreuth, Bayreuth, Germany

    person_pinThorsten OPEL, Chair of Ceramic Materials Engineering, University of Bayreuth, Bayreuth, Germany
    09:30 - 09:45 | Development of an ultra-fast laser heating system: pyrolysis process into polymer matrix composite materials.Victor ASENSIO, Laboratory of Thermostructural Composites (LCTS) - University of Bordeaux, (UMR 5801 : CNRS, CEA, SAFRAN, UB), Pessac, France
    David DAMIANI,
    Francis REBILLAT, Laboratory of Thermostructural Composites (LCTS) - University of Bordeaux, (UMR 5801 : CNRS, CEA, SAFRAN, UB), Pessac, France
    Antonio COSCULLUELA,

    person_pinVictor ASENSIO, Laboratory of Thermostructural Composites (LCTS) - University of Bordeaux, (UMR 5801 : CNRS, CEA, SAFRAN, UB), Pessac, France
    09:45 - 10:00 | Damage monitoring of SiCf/SiC Ceramic Matrix Composites using Acoustic Emission and Extensometry during Stepped Fatigue TestingJordan STEPHEN, Institute of Structural Materials, Swansea University, Swansea, United Kingdom
    Zak QUINEY, Institute of Structural Materials, Swansea University, Swansea, United Kingdom
    Gonzalo GARCIA LUNA, Rolls Royce Plc, Derby, United Kingdom
    Stephen PATTISON, Rolls Royce Plc, Derby, United Kingdom
    Spencer JEFFS, Institute of Structural Materials, Swansea University, Swansea, United Kingdom

    person_pinJordan STEPHEN, Institute of Structural Materials, Swansea University, Swansea, United Kingdom
    10:00 - 10:15 | The Influence of Stress Concentrations on Localised Acoustic Emission in SiCf/SiC Ceramic Matrix Composites under Tensile LoadingZak QUINEY, Swansea University Institute of Structural Materials (ISM), Swansea, United Kingdom
    Connor BOYLE, Swansea University Institute of Structural Materials (ISM), Swansea, United Kingdom
    Jordan STEPHEN, Swansea University Institute of Structural Materials (ISM), Swansea, United Kingdom
    Chris NEWTON, Swansea University Institute of Structural Materials (ISM), Swansea, United Kingdom
    Gonzalo GARCIA LUNA, Rolls-Royce Plc., Derby, United Kingdom
    Stephen PATTISON, Rolls-Royce Plc., Derby, United Kingdom
    Martin BACHE, Swansea University Institute of Structural Materials (ISM), Swansea, United Kingdom
    Spencer JEFFS, Swansea University Institute of Structural Materials (ISM), Swansea, United Kingdom

    person_pinZak QUINEY, Swansea University Institute of Structural Materials (ISM), Swansea, United Kingdom
    K08:30 - 09:00 | Thermodynamic database for the refractories and high temperature ceramicsIn-Ho JUNG, Seoul National University, Seoul, South Korea

    person_pinIn-Ho JUNG, Seoul National University, Seoul, South Korea
    09:00 - 09:15 | Thermochemistry of Corrosion of Ceramic Coating Materials by Silicate MeltsGustavo COSTA, NASA, Cleveland, United States

    person_pinGustavo COSTA, NASA, Cleveland, United States
    09:15 - 09:30 | High Temperature Electrochemical Studies of Stainless Steel-Ceramic Composites in reference to molten aluminum alloyPiotr MALCZYK, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    Marcel MANDEL, Institute of Materials Engineering, TU Bergakademie Freiberg, Freiberg, Germany
    Serhii YAROSHEVSKYI, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    Christian WEIGELT, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    Tilo ZIENERT, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    Lutz KRÜGER, Institute of Materials Engineering, TU Bergakademie Freiberg, Freiberg, Germany
    Christos ANEZIRIS, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany

    person_pinPiotr MALCZYK, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    09:30 - 09:45 | Calculation of mass transfer for rotating finger test equipmentBurhanuddin BURHANUDDIN, Montanuniversitaet Leoben, Leoben, Austria
    Harald HARMUTH, Montanuniversitaet Leoben, Leoben, Austria
    Jerónimo GUARCO,

    person_pinBurhanuddin BURHANUDDIN, Montanuniversitaet Leoben, Leoben, Austria
    09:45 - 10:00 | A method for calculation of erosion parameters in refractory erosion by meltsJeronimo GUARCO,
    Sandra VOLLMANN, Chair of Ceramics, Montanuniversität Leoben, Leoben, Austria
    Harald HARMUTH, Chair of Ceramics, Montanuniversität Leoben, Leoben, Austria
    Burhanuddin BURHANUDDIN, Chair of Ceramics, Montanuniversität Leoben, Leoben, Austria

    person_pinJeronimo GUARCO, Chair of Ceramics, Montanuniversität Leoben, Leoben, Austria; K1-MET GmbH, Linz, Austria
    10:00 - 10:15 | Thermodynamic assessment of ternary Al-M-O (M=Nb, Ta) systems to enhance the development ?of coarse-grained refractory compositesJulian GEBAUER, Karlsruhe Institute of Technology, Institute for Applied Materials - Applied Materials Physics, Eggenstein-Leopoldshafen, Germany
    Peter FRANKE, Karlsruhe Institute of Technology, Institute for Applied Materials - Applied Materials Physics, Eggenstein-Leopoldshafen, Germany
    Hans J. SEIFERT, Karlsruhe Institute of Technology, Institute for Applied Materials - Applied Materials Physics, Eggenstein-Leopoldshafen, Germany

    person_pinJulian GEBAUER, Karlsruhe Institute of Technology, Institute for Applied Materials - Applied Materials Physics, Eggenstein-Leopoldshafen, Germany
    10:15 - 10:30 | Viscosity and solubility limit: two key parameters to prevent refractory corrosion by slagJacques POIRIER, CEMHTI-CNRS / University of Orleans, Orleans, France

    person_pinJacques POIRIER, CEMHTI-CNRS / University of Orleans, Orleans, France
    K08:30 - 09:00 | The corrosion resistance of stabilized zirconia in pure hydrogen atmosphereJennifer ASTOVEZA, IMERYS, Paris, France
    Jean-Michel AUVRAY, IMERYS, Paris, France
    Eric FRIER, IMERYS, Paris, France
    Rose-Marie MINEAU, IMERYS, Paris, France
    Christoph WÖHRMEYER, IMERYS, Paris, France

    person_pinJennifer ASTOVEZA, IMERYS, Paris, France
    HL09:00 - 09:30 | Application of flame-sprayed ceramic coatings on silica-based insulating refractories for steel ingot castingFlorian KERBER, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Marc NEUMANN, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Tilo ZIENERT, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Thomas SCHEMMEL, Refratechnik Steel GmbH, Research & Development, Düsseldorf, Germany
    Helge JANSEN, Refratechnik Steel GmbH, Research & Development, Düsseldorf, Germany
    Christos G. ANEZIRIS, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany

    person_pinFlorian KERBER, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    09:30 - 09:45 | Multicriteria optimization as enabler for Sustainable Ceramic Matrix CompositesDietmar KOCH, University of Augsburg, Augsburg, Germany
    Anna SCHNELLER, University of Augsburg, Augsburg, Germany
    Lars WIETSCHEL, University of Augsburg, Augsburg, Germany
    Andrea THORENZ, University of Augsburg, Augsburg, Germany

    person_pinDietmar KOCH, University of Augsburg, Augsburg, Germany
    09:45 - 10:00 | Characterization of Steel Ceramic Composite anodes for cryolite/aluminium environment based on recycled MgO-C bricksSerhii YAROSHEVSKYI, Techische Universität Bergakademie Freiberg, Institut für Keramik, Feuerfest und Verbundwerkstoffe, Freiberg, Germany
    Christian WEIGELT, Techische Universität Bergakademie Freiberg, Institut für Keramik, Feuerfest und Verbundwerkstoffe, Freiberg, Germany
    Piotr MALCZYK, Techische Universität Bergakademie Freiberg, Institut für Keramik, Feuerfest und Verbundwerkstoffe, Freiberg, Germany
    Jana HUBALKOVA, Techische Universität Bergakademie Freiberg, Institut für Keramik, Feuerfest und Verbundwerkstoffe, Freiberg, Germany
    Christos G. ANEZIRIS, Techische Universität Bergakademie Freiberg, Institut für Keramik, Feuerfest und Verbundwerkstoffe, Freiberg, Germany

    person_pinSerhii YAROSHEVSKYI, Techische Universität Bergakademie Freiberg, Institut für Keramik, Feuerfest und Verbundwerkstoffe, Freiberg, Germany
    10:00 - 10:15 | Influence of different metkaolins mixture on the geopolymers synthesis Wilfried N'CHO, IRCER, LIMOGES, France

    person_pinWilfried N'CHO, IRCER, LIMOGES, France
    10:15 - 10:30 | Influence of alkaline and iron precursors on geopolymer matrix at high temperature (1150 °C)Quentin CLIGNY, Institut de Recherche sur les Céramiques (UMR CNRS 7315), Centre Européen de la Céramique, Limoges, France
    Damien BRANDT, CEA, DAM, LE RIPAULT, F-37260 Monts, France
    Sylvie ROSSIGNOL, Institut de Recherche sur les Céramiques (UMR CNRS 7315), Centre Européen de la Céramique, Limoges, France

    person_pinQuentin CLIGNY, Institut de Recherche sur les Céramiques (UMR CNRS 7315), Centre Européen de la Céramique, Limoges, France
    HL08:30 - 09:00 | Development of glasses, glass-ceramics and composites in various glass systems suitable for drawing (bio)photonic fibers Laeticia PETIT, Tampere University, Tampere, Finland

    person_pinLaeticia PETIT, Tampere University, Tampere, Finland
    09:00 - 09:15 | In situ study of solidification paths of a liquid Al2O3-ZrO2-SiO2 mixtureMaureen YEMBELE,
    Vincent SAROU-KANIAN, CEMHTI CNRS, Orléans, France
    Emmanuel VERON, CEMHTI CNRS, Orléans, France
    Pierrick VESPA, Saint Gobain Research Provence, Cavaillon, France
    Emmanuel DE BILBAO, CEMHTI CNRS, Orléans, France

    person_pinMaureen YEMBELE, CEMHTI CNRS, Orléans, France; Saint Gobain Research Provence, Cavaillon, France
    09:15 - 09:30 | Yb3+ doped crystals in the glassNatalia VAKULA, Photonics Laboratory, Tampere University, Tampere, Finland
    Zhuorui LU,
    Michèle UDE, Université Côte d'Azur, Institut de Physique de Nice, Nice, France
    Martiane CABIÉ, Aix Marseille Univ, CNRS, Centrale Marseille, Marseille, France
    Thomas NEISIUS, Aix Marseille Univ, CNRS, Centrale Marseille, Marseille, France
    François ORANGE, Université Côte d'Azur, CCMA, Nice, France
    Franck PIGEONNEAU, MINES Paris, PSL Research University, CEMEF - Centre for material forming, Sophia Antipolis Cedex, France
    Wilfried BLANC, Université Côte d'Azur, Institut de Physique de Nice, Nice, France
    Laeticia PETIT, Photonics Laboratory, Tampere University, Tampere, Finland

    person_pinNatalia VAKULA, Photonics Laboratory, Tampere University, Tampere, Finland
    09:30 - 09:45 | Controlling the atomic structure and thermal conductivity of disordered SiO2 thin films using substrate surfacesKatelyn KIRCHNER,
    Melbert JEEM, Hokkaido University, Sapporo, Japan
    Sohei OGASAWARA, Hokkaido University, Sapporo, Japan
    Hiromichi OHTA, Hokkaido University, Sapporo, Japan
    Shinji KOHARA, National Institute for Materials Science (NIMS), Tsukuba, Japan
    Tomoyuki KOGANEZAWA, Japan Synchrotron Radiation Research Institute (JASRI), Hyogo, Japan
    Rosantha KUMARA, Japan Synchrotron Radiation Research Institute (JASRI), Hyogo, Japan
    Masaya FUJIOKA, Hokkaido University, Sapporo, Japan
    Junji NISHI, Hokkaido University, Sapporo, Japan
    Yasutaka MATSUO, Hokkaido University, Sapporo, Japan
    John MAURO, The Pennsylvania State University, University Park, United States
    Madoka ONO, Hokkaido University, Sapporo, Japan

    person_pinKatelyn KIRCHNER, The Pennsylvania State University, University Park, United States; Hokkaido University, Sapporo, Japan
    09:45 - 10:00 | Glass-Ceramics and Glasses for Microwave and THz ApplicationsJobin VARGHESE, Department of Hybrid Microsystems, Microsystems LTCC and HTCC, Fraunhofer IKTS, Winterbergstraße 28, 01277 Dresden, Germany, Dresden, Germany
    Martin IHLE, Department of Hybrid Microsystems, Microsystems LTCC and HTCC, Fraunhofer IKTS, Winterbergstraße 28, 01277 Dresden, Germany, Dresden, Germany
    Steffen ZIESCHE, Department of Hybrid Microsystems, Microsystems LTCC and HTCC, Fraunhofer IKTS, Winterbergstraße 28, 01277 Dresden, Germany, Dresden, Germany
    Uwe PARTSCH, Department of Hybrid Microsystems, Microsystems LTCC and HTCC, Fraunhofer IKTS, Winterbergstraße 28, 01277 Dresden, Germany, Dresden, Germany
    Marzena OLSZEWSKA-PLACHA , QWED Sp. z o.o., Krzywickiego 12/1, 02-078 Warsaw, Poland , Warsaw, Poland
    Janusz RUDNICKI, QWED Sp. z o.o., Krzywickiego 12/1, 02-078 Warsaw, Poland , Warsaw, Poland
    Beata SYNKIEWICZ-MUSIALSKA, Lukasiewicz Research Network-Institute of Microelectronics and Photonics, Kraków Division, ul. Zablocie 39, 30-701 Kraków, Poland, Kraków, Poland
    Dorota SZWAGIERCZAK, Lukasiewicz Research Network-Institute of Microelectronics and Photonics, Kraków Division, ul. Zablocie 39, 30-701 Kraków, Poland, Kraków, Poland
    Antonio CLEMENTE , CEA-Leti, Université Grenoble-Alpes, F-38000 Grenoble, France, Grenoble, France
    Samara GHARBIEH, CEA-Leti, Université Grenoble-Alpes, F-38000 Grenoble, France, Grenoble, France
    Hamza TURKI, Inoveos France, 6 Rue Pierre Milon 19100 Brive-la-Gaillarde, France, Brive-la-Gaillarde, France
    Vincent OLIVIER, Inoveos France, 6 Rue Pierre Milon 19100 Brive-la-Gaillarde, France, Brive-la-Gaillarde, France
    Bertrand LENOIR, Inoveos France, 6 Rue Pierre Milon 19100 Brive-la-Gaillarde, France, Brive-la-Gaillarde, France

    person_pinJobin VARGHESE, Department of Hybrid Microsystems, Microsystems LTCC and HTCC, Fraunhofer IKTS, Winterbergstraße 28, 01277 Dresden, Germany, Dresden, Germany
    10:00 - 10:15 | Investigation of joining mechanism of low-temperature borosilicate sealing glassesSathya NARAYANASAMY, Empa - Swiss Federal Laboratories for Material Science and Technology, Dübendorf, Switzerland
    Gurdial BLUGAN, Empa - Swiss Federal Laboratories for Material Science and Technology, Dübendorf, Switzerland

    person_pinSathya NARAYANASAMY, Empa - Swiss Federal Laboratories for Material Science and Technology, Dübendorf, Switzerland
    K08:30 - 09:00 | Aqueous chemical deposition of thin oxide films  Mari-Ann EINARSRUD, NTNU Norwegian University of Science and Technology, Trondheim, Norway

    person_pinMari-Ann EINARSRUD, NTNU Norwegian University of Science and Technology, Trondheim, Norway
    09:00 - 09:15 | Nd-doped TiO2 Mesoporous Self-supported Membranes Prepared by Colloidal Sol-gel Route and Tested as Adsorbents and Photocatalysts María Teresa COLOMER , Instituto de Cerámica y Vidrio (ICV), CSIC, Madrid, Spain
    Donaldo Fabio MERCADO, Grenoble INP, LMPG, Institute of Engineering, Université Grenoble Alpes, Grenoble, France
    Florencia VATTIER, Instituto de Ciencia de Materiales de Sevilla (ICMS), CSIC – Universidad de Sevilla, Sevilla, Spain
    Luz Marina BALLESTEROS, Centro de Investigaciones en Catálisis (@CICATUIS), Universidad Industrial de Santander, Bucaramanga, Colombia

    person_pinMaría Teresa COLOMER , Instituto de Cerámica y Vidrio (ICV), CSIC, Madrid, Spain
    09:15 - 09:30 | Elaboration of lead-free piezoelectric thick films by Aerosol DepositionAnass CHRIR, Institute of Research for Ceramics (UMR CNRS 7315), Limoges, France
    Oscar ROJAS, Center for Technology Transfers in Ceramics (CTTC), Limoges, France
    Laurence BOYER, Center for Technology Transfers in Ceramics (CTTC), Limoges, France
    Olivier DURAND, Center for Technology Transfers in Ceramics (CTTC), Limoges, France
    Pascal MARCHET, Institute of Research for Ceramics (UMR CNRS 7315), Limoges, France

    person_pinAnass CHRIR, Institute of Research for Ceramics (UMR CNRS 7315), Limoges, France
    09:30 - 09:45 | Preparation of lead magnesium niobate-based multicaloric composites using the aerosol deposition methodVictor REGIS DE MORAES,
    Matej ŠADL,
    Andreja BENCAN,
    Goran DRAŽIC,
    Hana URŠIC,

    person_pinVictor REGIS DE MORAES, Electronic Ceramics Department Jozef Stefan Institute, Ljubljana, Slovenia; Jožef Stefan International Postgraduate School, Ljubljana, Slovenia
    09:45 - 10:00 | Fabrication of the lead-free Na1/2Bi1/2TiO3-BaTiO3 piezoceramics by additive manufacturingAnastasia KUCHERYAVAYA, Institute of Chemistry and Technology of Materials, Graz University of Technology, Graz, Austria
    Yue LIU, Division Nonmetallic-Inorganic Materials, Department of Materials and Earth Sciences, Technical University of Darmstadt, Darmstadt, Germany
    Lovro FULANOVIC, Division Nonmetallic-Inorganic Materials, Department of Materials and Earth Sciences, Technical University of Darmstadt, Darmstadt, Germany
    Jurij KORUZA, Institute of Chemistry and Technology of Materials, Graz University of Technology, Graz, Austria

    person_pinAnastasia KUCHERYAVAYA, Institute of Chemistry and Technology of Materials, Graz University of Technology, Graz, Austria
    HL08:30 - 09:00 | Thick high energy density electrode fabrication and active material synthesis using Spark Plasma SinteringArina NADEINA,
    Vincent SUZNEC,

    person_pinVincent SUZNEC, Laboratoire de Réactivité et Chimie des Solides (LRCS), CNRS UMR 7314, Université de Picardie Jules Verne, Amiens , FRANCE; CIRIMAT, Université de Toulouse, CNRS, Université Toulouse 3 - Paul Sabatier, Toulouse, FRANCE
    09:00 - 09:15 | Silicon oxycarbide ceramic anodes for Na-ion batteriesAlper GÜNEREN,
    Zoltán LENCÉŠ, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Bratislava, Slovakia

    person_pinZoltán LENCÉŠ, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Bratislava, Slovakia
    09:15 - 09:30 | Sintering and thermal expansion behavior of glass-based sealants for α/β- Al2O3 joints in low-temperature Na-Zn chloride batteriesFabiana D'ISANTO, POLITECNICO DI TORINO- DISAT, Torino, Italy
    Andrea BAGGIO, POLITECNICO DI TORINO- DISAT, Torino, Italy
    Milena SALVO, POLITECNICO DI TORINO- DISAT, Torino, Italy
    Diego BASSO, FZSoNick S.A., Stabio, Switzerland
    Daniele GAIA, FZSoNick S.A., Stabio, Switzerland
    Fabrizio VAGLIANI, FZSoNick S.A., Stabio, Switzerland
    Alberto TURCONI, FZSoNick S.A., Stabio, Switzerland
    Federico SMEACETTO, POLITECNICO DI TORINO- DISAT, Torino, Italy

    person_pinFabiana D'ISANTO, POLITECNICO DI TORINO- DISAT, Torino, Italy
    09:30 - 09:45 | Assessing the Electrochemical Stability Window of LAGP Solid-State Electrolyte: The Role of Improved Electrical ContactVinicius Martins ZALLOCCO, Vitreous Materials Laboratory, São Carlos, Brazil
    Ana Candida Martins RODRIGUES, Vitreous Materials Laboratory, São Carlos, Brazil

    person_pinVinicius Martins ZALLOCCO, Vitreous Materials Laboratory, São Carlos, Brazil
    09:45 - 10:00 | First-principles and machine learning study of the structural properties of binary  and ternary tellurite based oxideglassy systemFiras Elkheir SHUAIB MOHAMMED, university of Limoges (IRCER-lab), Limoges, France

    person_pinFiras Elkheir SHUAIB MOHAMMED, university of Limoges (IRCER-lab), Limoges, France
    K08:30 - 09:15 | From archaeological to contemporary celadonsJean François FOUILHOUX, Maisons des Artistes , paris/ AIC Genève, p
    Armand DESBAT, Laboratoire ArAr UMR 5138, LYON, FRANCE

    person_pinJean François FOUILHOUX, Maisons des Artistes , paris/ AIC Genève, p
    Armand DESBAT, Laboratoire ArAr UMR 5138, LYON, FRANCE
    09:15 - 09:30 | Not just the vessels: tracing the Early Rus' commerce through medieval amphorae studiesAnastasiia KOROKHINA,
    Sylvie Yona WAKSMAN, CNRS UMR5138 "Archéologie & Archéométrie", Lyon, France
    Mariia TYMOSHENKO, Museum of Kyiv History, Kyiv, Ukraine
    Natalia KHAMAIKO,
    Maciej TRZECIECKI, Institute of Archaeology and Ethnology Polish Academy of Sciences, Warsaw, Poland
    Michal AUCH, Institute of Archaeology and Ethnology Polish Academy of Sciences, Warsaw, Poland
    Marcin WO?OSZYN,

    person_pinAnastasiia KOROKHINA, Leibniz Institute for the History and Culture of Eastern Europe (GWZO), Leipzig, Germany; Institute of Archaeology, National Academy of Sciences of Ukraine, Kyiv, Ukraine
    09:30 - 09:45 | Ceramics during the Middle Ages in Navarra: production centres, sources of raw materials and ceramics tradeIván RUIZ-ARDANAZ, University of Navarra, Chemistry Department (Irunlarrea, 1, Edificio de Investigación, 31008, Pamplona, Navarra), Spain
    Esther LASHERAS, University of Navarra, Chemistry Department (Irunlarrea, 1, Edificio de Investigación, 31008, Pamplona, Navarra), Spain
    Adrián DURÁN, University of Navarra, Chemistry Department (Irunlarrea, 1, Edificio de Investigación, 31008, Pamplona, Navarra), Spain

    person_pinIván RUIZ-ARDANAZ, University of Navarra, Chemistry Department (Irunlarrea, 1, Edificio de Investigación, 31008, Pamplona, Navarra), Spain
    09:45 - 10:00 | San Diego wreck ceramics and archaeometry of a global world  Alejandro PINILLA, Instituto de Historia, CSIC. Calle Albasanz, 26-28., 28037 Madrid, Spain
    Fatima QUIJADA, Instituto de Historia, CSIC. Calle Albasanz, 26-28., 28037 Madrid, Spain
    Fernando AGUA, Instituto de Historia, CSIC. Calle Albasanz, 26-28., 28037 Madrid, Spain
    Mangeles VILLEGAS, Instituto de Historia, CSIC. Calle Albasanz, 26-28., 28037 Madrid, Spain
    Susana GARCIA, Museo Naval. Paseo del Prado, 5., 28014 Madrid, Spain
    Manuel GARCIA-HERAS, Instituto de Historia, CSIC. Calle Albasanz, 26-28., 28037 Madrid, Spain

    person_pinManuel GARCIA-HERAS, Instituto de Historia, CSIC. Calle Albasanz, 26-28., 28037 Madrid, Spain
    10:00 - 10:15 | Technological and stylistic characteristics of Chupicuaro ceramic wares (Formative Mesoamerica)Fanny ALLOTEAU, Université Bordeaux Montaigne – Archéosciences Bordeaux, UMR CNRS 6034, Bordeaux, France
    Ayed BEN AMARA, Université Bordeaux Montaigne – Archéosciences Bordeaux, UMR CNRS 6034, Bordeaux, France
    Nadia CANTIN, Université Bordeaux Montaigne – Archéosciences Bordeaux, UMR CNRS 6034, Bordeaux, France
    Hector CABADAS BAEZ, Universidad Autónoma del Estado de México, UAEM – Faculty of Geography , Bordeaux, Mexico
    Alejandra CASTANEDA, Universidad Autónoma del Estado de México, UAEM – Faculty of Geography , Bordeaux, Mexico
    Sergey SEDOV, Universidad Autónoma del Estado de México, UAEM – Faculty of Geography , Bordeaux, Mexico
    Véronique DARRAS, Universidad Autónoma del Estado de México, UAEM – Faculty of Geography , Bordeaux, Mexico
    Georgina IBARRA, Universidad Autónoma del Estado de México, UAEM – Faculty of Geography , Bordeaux, Mexico

    person_pinFanny ALLOTEAU, Université Bordeaux Montaigne – Archéosciences Bordeaux, UMR CNRS 6034, Bordeaux, France
    10:15 - 10:30 | New insight into the provenance and technology of Byzantine Polychrome White WareYona WAKSMAN, CNRS UMR5138 "Archéologie & Archéométrie", Lyon, France
    Anne BOUQUILLON,
    Katerina AMPRAZOGOULA, Ephorate of antiquities of Chalkidiki and of the Mount Athos, Thessaloniki, Greece
    Aikaterini TSANANA, Ephorate of antiquities of Chalkidiki and of the Mount Athos, Thessaloniki, Greece

    person_pinYona WAKSMAN, CNRS UMR5138 "Archéologie & Archéométrie", Lyon, France
    08:30 - 09:00 | Refractories, Composites and Recyclates: Approaches for sustainability and strategic sovereigntyChristos ANEZIRIS, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    Patrick GEHRE, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    Jana HUBALKOVA, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    Tilo ZIENERT, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    Steffen DUDCZIG, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    Piotr MALCZYK, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    Serhii YAROSHEVSKYI, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany

    person_pinChristos ANEZIRIS, Institute of Ceramics, Refractories and Composite Materials, TU Bergakademie Freiberg, Freiberg, Germany
    09:00 - 09:30 | Rapid Hot-pressed silicon carbide ceramics for ultra-high temperature applicationsPavol SAJGALIK, Slovak Academy of Sciences, Bratislava, Slovakia
    Ondrej HNAZEL, Slovak Academy of Sciences, Bratislava, Slovakia
    Alexandra KOVALCIKOVA, Slovak Academy of Sciences, Bratislava, Slovakia
    Zhang CHENGYU, North Western Polytechnic University, Xi´An, China
    Alexander MUKASYAN, University of Notre Dame, Notre Dame, IN, United States

    person_pinPavol SAJGALIK, Slovak Academy of Sciences, Bratislava, Slovakia
    09:30 - 10:00 | Electrical, thermal, and mechanical properties of porous solid-state sintered SiC ceramicsYoung-Wook KIM, University of Seoul, Seoul, Korea (Republic of)
    Yeong-Jun OH, University of Seoul, Seoul, Korea (Republic of)
    Kwang Ho KIM, Global Frontier R&D Center, Pusan National University, Busan, Korea (Republic of)

    person_pinYoung-Wook KIM, University of Seoul, Seoul, Korea (Republic of)
    10:00 - 10:30 | Review: Mechanical Properties of Porous Silicon Nitride Ceramics with Controlled MicrostructuresStuart HAMPSHIRE, University of Limerick, Limerick, Ireland
    Aránzazu DÍAZ-CUENCA,

    person_pinStuart HAMPSHIRE, University of Limerick, Limerick, Ireland
    HL08:30 - 09:00 | Backgrounds and clinical application of dental ceramic implantsJens TARTSCH, European Society for Ceramic Implantology, ESCI

    person_pinJens TARTSCH, European Society for Ceramic Implantology, ESCI
    K09:00 - 09:30 | Present status and future prospects of zirconia oral implantsRalf KOHAL, University of Freiburg, Faculty of Medicine, University of Freiburg, 79106 Freiburg,, Germany

    person_pinRalf KOHAL, University of Freiburg, Faculty of Medicine, University of Freiburg, 79106 Freiburg,, Germany
    09:30 - 09:45 | In vivo ageing of zirconia dental ceramicsPeter JEVNIKAR, University of Ljubljana , Slovenia

    person_pinPeter JEVNIKAR, University of Ljubljana , Slovenia
    09:45 - 10:00 | Translational fractography of one- and two-piece clinically failed zirconia implantsFei ZHANG,
    Mona MONZAVI, Periodontics and Ceramic Implantology (private practice), Santa Ana, United States
    Jef VLEUGELS, KU Leuven, Department of Materials Engineering, Heverlee, Belgium
    Bart VAN MEERBEEK, KU Leuven, Department of Oral Health Sciences, Leuven, Belgium

    person_pinFei ZHANG, KU Leuven, Department of Materials Engineering, Heverlee, Belgium; KU Leuven, Department of Oral Health Sciences, Leuven, Belgium
    10:00 - 10:15 | In vitro lifetime assessment of zirconia dental ceramicsChong WEI, Northwestern Polytechnical University, XI'AN, China
    Shibao LI, Fourth Military Medical University, XI'AN, China
    Laurent GREMILLARD, INSA-Lyon, Villeurbanne, France

    person_pinChong WEI, Northwestern Polytechnical University, XI'AN, China
    10:15 - 10:30 | Ceramics in Dental Applications: Favorable Surface Properties and Novel Manufacturing of Established MaterialsAlessandro Alan PORPORATI,
    Yvonne MÖDINGER, CeramTec GmbH, Plochingen, Germany

    person_pinAlessandro Alan PORPORATI, CeramTec GmbH, Plochingen, Germany; Universita' degli Studi di Trieste, Department of Engineering and Architecture, Trieste, Italy
    HL11:00 - 11:30 | Engineering of ceramic oxides microstructures using reactive Cold-Spark Plasma SinteringClaude ESTOURNES, CIRIMAT, TOULOUSE, France
    Julien DE LANDTSHEER,
    Mélanie ROUSSELLE,
    Geoffroy CHEVALLIER, CIRIMAT, TOULOUSE, France
    Alicia WEIBEL, CIRIMAT, TOULOUSE, France
    Florence ANSART, CIRIMAT, TOULOUSE, France
    Guillaume FRADET, SAFRAN AIRCRAFT ENGINES, Corbeil-Essonnes , France
    Catherine ELISSALDE, ICMCB, Pessac, France
    Thomas HERISSON DE BEAUVOIR, CIRIMAT, TOULOUSE, France

    person_pinClaude ESTOURNES, CIRIMAT, TOULOUSE, France
    11:30 - 11:45 | In-situ synthesis and sintering of Yb2SiO5 and Yb2Si2O7 minerals by pulsed electric current sintering and conventional sinteringShuigen HUANG, KU Leuven, heverlee, Belgium
    Konstantina LAMBRINOU, University of Huddersfield, Huddersfield , United Kingdom
    Jozef VLEUGELS, KU Leuven, heverlee, Belgium

    person_pinShuigen HUANG, KU Leuven, heverlee, Belgium
    11:45 - 12:00 | Development of Sintering Process Monitoring Method Using Nanosecond Pulsed Electric FieldTadachika NAKAYAMA, Nagaoka University of Technology, Nagaoka, Japan
    Hiroyuki SAITO, Nagaoka University of Technology, Nagaoka, Japan

    person_pinTadachika NAKAYAMA, Nagaoka University of Technology, Nagaoka, Japan
    12:00 - 12:15 | A novel two-stage flash sintering of fine-grain 3 mol% yttria stabilized zirconiaYejie CAO, Northwestern Polytechnical University, Xi'an，Shaanxi, China

    person_pinYejie CAO, Northwestern Polytechnical University, Xi'an，Shaanxi, China
    12:15 - 12:30 | Morphology control in BiFeO3: A spark plasma sintering studyJenna METERA, University of California San Diego, La Jolla, United States
    Everbrook ZHOU, University of California San Diego, La Jolla, United States
    Javier E. GARAY, University of California San Diego, La Jolla, United States
    Olivia A. GRAEVE, University of California San Diego, La Jolla, United States

    person_pinJenna METERA, University of California San Diego, La Jolla, United States
    12:30 - 12:45 | Rapid fabrication of transparent silica glass components using photocurable suspension: shaping finer structures from coarse modelMotoyuki IIJIMA, Yokohama National University, Yokohama, Japan
    Kengo NISHIYAMA, Yokohama National University, Yokohama, Japan
    Yoshihiko YAMANOI, Yokohama National University, Yokohama, Japan
    Junichi TATAMI, Yokohama National University, Yokohama, Japan

    person_pinMotoyuki IIJIMA, Yokohama National University, Yokohama, Japan
    12:45 - 13:00 | BSTO components using Rapid prototyping and different Gelcasting systemsJeevankumar PALLAGANI, School of Physics, University of Hyderabad, Hyderabad, India
    Poly ROSE, School of Physics, University of Hyderabad, Hyderabad, India
    Seshu Bai VUMMETHALA, School of Physics, University of Hyderabad, Hyderabad, India

    person_pinJeevankumar PALLAGANI, School of Physics, University of Hyderabad, Hyderabad, India
    HL11:00 - 11:30 | Minimizing anisotropy and cracking during co-sintering of layered ceramics: Examples for electronics, energy and catalysisDiletta GIUNTINI, Eindhoven University of Technology, Eindhoven, Netherlands

    person_pinDiletta GIUNTINI, Eindhoven University of Technology, Eindhoven, Netherlands
    11:30 - 11:45 | Nano-structured MgAl2O4 spinel fabricated by High Pressure Spark Plasma Sintering : effect of high pressure on microstructureSandrine COTTRINO, Laboratoire MATEIS, Villeurbanne, France
    Thomas GAUDISSON, Laboratoire ILM, Villeurbanne, France
    Thierry DOUILLARD , Laboratoire MATEIS, Villeurbanne, France
    Sylvie LE FLOCH, Laboratoire ILM, Villeurbanne, France

    person_pinSandrine COTTRINO, Laboratoire MATEIS, Villeurbanne, France
    11:45 - 12:00 | The Phase Evolution of Sr-hexaferrite during Rapid Sintering by Intense Thermal Radiation.  Aleksander UCAKAR,
    Andraž KOCJAN,
    Blaž BELEC, Materials Research Laboratory, University of Nova Gorica, Nova Gorica, Slovenia, Nova Gorica, Slovenia
    Janez KOŠIR, Department of Chemistry and Materials Science, Aalto University, Espoo, Finland, Espoo, Finland
    Tanja KALLIO, Department of Chemistry and Materials Science, Aalto University, Espoo, Finland, Espoo, Finland
    Petra JENUŠ,

    person_pinAleksander UCAKAR, Department for Nanostructured materials, Jožef Stefan Institute, Ljubljana, Slovenia, Ljubljana, Slovenia; Jožef Stefan International Postgraduate School, Ljubljana, Slovenia, Ljubljana, Slovenia; Center for Microscopy and Microanalysis, Jožef Stefan Institute, Ljubljana, Slovenia, Ljubljana, Slovenia
    12:00 - 12:15 | CeO2-doped aluminum nitride ceramics: influence of the sintering features on the working propertiesHatim SAIDI,
    Mickaël COEFFE-DESVAUX, Univ. Limoges, CNRS, IRCER, UMR 7315, 87000, Limoges, France
    Nicolas PRADEILLES, Univ. Limoges, CNRS, IRCER, UMR 7315, 87000, Limoges, France
    Mickaël JOINET, THALES AVS FRANCE, 38430, Moirans, France
    Alexandre MAITRE, Univ. Limoges, CNRS, IRCER, UMR 7315, 87000, Limoges, France

    person_pinHatim SAIDI, Univ. Limoges, CNRS, IRCER, UMR 7315, 87000, Limoges, France; THALES AVS FRANCE, 38430, Moirans, France
    12:15 - 12:30 | IR transparent Y2O3-MgO nanocomposite ceramic processed by sol-gel powder synthesis and a two-step SPS sintering techniqueNathan BRARD,
    Johan PETIT, DMAS, ONERA, Université Paris-Saclay, Châtillon, France
    Stéphane BACH,

    person_pinNathan BRARD, DMAS, ONERA, Université Paris-Saclay, Châtillon, France; ICMPE (Institute of Chemistry and Materials of Paris-Est), Thiais, France
    12:30 - 12:45 | Graphite-Cr composites sintered by SPS technique: Influence of the temperature and powder processing method on the propertiesJuan PIÑUELA-NOVAL, Nanomaterials and Nanotechnology Research Center (CINN-CSIC), El Entrego, Spain
    Daniel FERNÁNDEZ-GONZÁLEZ, Nanomaterials and Nanotechnology Research Center (CINN-CSIC), El Entrego, Spain
    Marta SUÁREZ, Nanomaterials and Nanotechnology Research Center (CINN-CSIC), El Entrego, Spain
    Cristian GÓMEZ-RODRÍGUEZ, Departamento de Mecánica, Facultad de Ingeniería, Universidad Veracruzana, Coatzacoalcos, Mexico
    Adolfo FERNÁNDEZ, Nanomaterials and Nanotechnology Research Center (CINN-CSIC), El Entrego, Spain

    person_pinJuan PIÑUELA-NOVAL, Nanomaterials and Nanotechnology Research Center (CINN-CSIC), El Entrego, Spain
    12:45 - 13:00 | Highly Transparent Polycrystalline MgO via Spark Plasma SinteringMichal SAKAJIO, Technion-Israel Institute of Technology, Haifa, Israel
    Vadim BEILIN, Technion-Israel Institute of Technology, Haifa, Israel
    Meirav MANN-LAHAV, Technion-Israel Institute of Technology, Haifa, Israel
    Shai ZAMIR, Rafael, Haifa, Israel
    Gennady SHTER, Technion-Israel Institute of Technology, Haifa, Israel
    Gideon GRADER, Technion-Israel Institute of Technology, Haifa, Israel

    person_pinGideon GRADER, Technion-Israel Institute of Technology, Haifa, Israel
    HL11:00 - 11:30 | Impact of thermal radiation on the high-temperature thermal behaviour of porous ceramics: from open-cell foams up to recent architectured 3D structuresBenoit ROUSSEAU, Nantes Université, CNRS, LTeN, Nantes, France
    F. ASLLANAJ,
    F. ENGUEHARD, Université de Poitiers, ISAE-ENSMA, CNRS, Institut P’, Futuroscope , Chasseneuil, France
    Y. FAVENNEC, Nantes Université, CNRS, LTeN, Nantes, France
    O. FARGES, Université de Lorraine, CNRS, LEMTA, Nancy, France
    R. FOURNIER, 5Université de Toulouse, CNRS, INPT, UPS LAPLACE, Toulouse, France
    M. EL HAFI, Université de Toulouse, IMT Mines Albi, RAPSODEE, Campus Jarlard, Albi, France
    G. PARENT, Université de Toulouse, IMT Mines Albi, RAPSODEE, Campus Jarlard, Albi, France
    J-H. RANDRIANALISOA, Université de Reims Champagne-Ardenne, ITheMM , Reims, France
    D. ROCHAIS, CEA/DAM, Le Ripault, BP 16, Monts, France
    V. SCHICK, Université de Pau, CNRS, LMAP, Anglet, France
    J. VICENTE, Aix Marseille Université, CNRS, IUSTI, Marseille, France
    G. VIGNOLES, Université de Bordeaux, CNRS, CEA, Safran Ceramics, LCTS, Pessac, France

    person_pinBenoit ROUSSEAU, Nantes Université, CNRS, LTeN, Nantes, France
    11:30 - 11:45 | Modeling of the curl distortion on ceramic parts caused by thermal and chemical stress during stereolithography processDylan VALLET, IRCER, Limoges, France
    Vincent PATELOUP, IRCER, Limoges, France
    Philippe MICHAUD, IRCER, Limoges, France
    Thierry CHARTIER, IRCER, Limoges, France

    person_pinDylan VALLET, IRCER, Limoges, France
    11:45 - 12:00 | AlSi12Fe-Al2O3 mechanical metamaterials from ceramics digital light processing additive manufacturingGeorgina MIRANDA, CICECO - Aveiro Institute of Materials, DEMaC - Department of Materials and Ceramic Engineering, University of Aveiro, 3810-193 Aveiro, Portugal, Aveiro, Portugal
    Carlos MATOS, CICECO - Aveiro Institute of Materials, DEMaC - Department of Materials and Ceramic Engineering, University of Aveiro, 3810-193 Aveiro, Portugal, Aveiro, Portugal
    Susana OLHERO, CICECO - Aveiro Institute of Materials, DEMaC - Department of Materials and Ceramic Engineering, University of Aveiro, 3810-193 Aveiro, Portugal, Aveiro, Portugal

    person_pinGeorgina MIRANDA, CICECO - Aveiro Institute of Materials, DEMaC - Department of Materials and Ceramic Engineering, University of Aveiro, 3810-193 Aveiro, Portugal, Aveiro, Portugal
    12:00 - 12:15 | Getting Closer to Obtaining Fully Dense Monolithic Ceria Stabilized Zirconia with Direct Ink WritingMia KOVAC, KU Leuven Department of Materials Engineering, Leuven, Belgium
    Erin KOOS, KU Leuven Department of Chemical Engineering, Leuven, Belgium
    Bart VAN MEERBEEK, KU Leuven Department of Oral Health Sciences, Leuven, Belgium
    Jef VLEUGELS, KU Leuven Department of Materials Engineering, Leuven, Belgium
    Annabel BRAEM, KU Leuven Department of Materials Engineering, Leuven, Belgium

    person_pinMia KOVAC, KU Leuven Department of Materials Engineering, Leuven, Belgium
    12:15 - 12:30 | Admaflex 3D printing technology for ceramics and metalsNadia EL FELSS, Admatec Europe, Alkmaar, Netherlands

    person_pinNadia EL FELSS, Admatec Europe, Alkmaar, Netherlands
    12:30 - 12:45 | Textured alumina/zirconia composites fabricated via Digital Light Processing (DLP)Bartolomeo COPPOLA, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
    Julien SCHMITT, Laboratoire de Synthèse et Fonctionnalisation des céramiques (LSFC) UMR 3080 CNRS/SAINT-GOBAIN CREE, SAINT-GOBAIN RESEARCH PROVENCE, Cavaillon, France
    Laura MONTANARO, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
    Paola PALMERO, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy

    person_pinBartolomeo COPPOLA, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
    12:45 - 13:00 | The M.A.T. a new way to shape SiC by 3DCeram SintoVincent AUCLAIR, 3DCeram Sinto, Limoges, France

    person_pinVincent AUCLAIR, 3DCeram Sinto, Limoges, France
    HL11:00 - 11:30 | Functionally Graded Ultra-high Temperature Ceramics: Thermo-elastic Numerical Analysis and Mechanical Properties Laura SILVESTRONI, CNR - ISSMC, Faenza, Italy
    Cesare MELANDRI, CNR - ISSMC, Faenza, Italy
    Diletta SCITI, CNR - ISSMC, Faenza, Italy
    Diego PAVAN, Dept. of Aerospace Science and Technology, Politecnico di Milano, Milan, Italy
    Antonio Mattia GRANDE, Dept. of Aerospace Science and Technology, Politecnico di Milano, Milan, Italy

    person_pinLaura SILVESTRONI, CNR - ISSMC, Faenza, Italy
    11:30 - 11:45 | Joining oxide-based ceramic matrix composites operating under direct flame exposureCarla MALINVERNI, Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, Torino, Italy
    Milena SALVO, Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, Torino, Italy
    Alessandro DE ZANET, Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, Torino, Italy
    Fabiana D'ISANTO, Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, Torino, Italy
    Federico SMEACETTO, Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, Torino, Italy
    Pierre BERTRAND, University Bourgogne Franche-Comté, Laboratory ICB, UMR - 6303 CNRS, site UTBM, Belfort, France
    Georg PUCHAS, Chair of Ceramic Materials Engineering, University of Bayreuth, Prof.-Rüdiger-Bormann-Str. 1, Bayreuth, Germany
    Stefan SCHAFFÖNER, Chair of Ceramic Materials Engineering, University of Bayreuth, Prof.-Rüdiger-Bormann-Str. 1, Bayreuth, Germany
    Valentina CASALEGNO, Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, Torino, Italy

    person_pinCarla MALINVERNI, Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, Torino, Italy
    11:45 - 12:00 | Joining of CVD β-SiC and Cf/SiC to themselves using in-situ formed SiC-ZrC interlayer Naser HOSSEINI, Institute of Inorganic Chemistry, Slovak Academy of Science, Bratislava, Slovakia
    Zdenek CHLUP, Institute of Physics of Materials, Czech Academy of Sciences, Brno, Czechia
    Alexandra KOVALCÍKOVÁ, Institute of Materials Research, Slovak Academy of Sciences, Košice, Slovakia
    Xiaobing ZHOU , Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo, China
    Filip ŠIŠKA, Institute of Physics of Materials, Czech Academy of Sciences, Brno, Czechia
    Ivo DLOUHÝ, Institute of Physics of Materials, Czech Academy of Sciences, Brno, Czechia
    Peter TATARKO, Institute of Inorganic Chemistry, Slovak Academy of Science, Bratislava, Slovakia

    person_pinNaser HOSSEINI, Institute of Inorganic Chemistry, Slovak Academy of Science, Bratislava, Slovakia
    12:00 - 12:15 | Mechanical Characterisation and Comparison of T-shape Intersections Made of C/SiC CompositesNicolas ABOUAB, Thermo-Structural Composite Laboratory (LCTS) - UMR 5801 (CNRS - CEA - Safran - Bordeaux University), Pessac, France
    Olivier CATY, Thermo-Structural Composite Laboratory (LCTS) - UMR 5801 (CNRS - CEA - Safran - Bordeaux University), Pessac, France
    André EBEL, Thermo-Structural Composite Laboratory (LCTS) - UMR 5801 (CNRS - CEA - Safran - Bordeaux University), Pessac, France
    François GUILLET, CEA - Military Application Division, Le Ripault, Monts, France
    Jérôme ROGER, Thermo-Structural Composite Laboratory (LCTS) - UMR 5801 (CNRS - CEA - Safran - Bordeaux University), Pessac, France

    person_pinNicolas ABOUAB, Thermo-Structural Composite Laboratory (LCTS) - UMR 5801 (CNRS - CEA - Safran - Bordeaux University), Pessac, France
    12:15 - 12:30 | Manufacture, Simulation and Testing of Torsion Bars made of Carbon-Fiber Reinforced Carbon-Silicon CarbidEmir Ege ARDAC, German Aerospace Center, Stuttgart, Germany
    Tobias LEHNERT, German Aerospace Center, Stuttgart, Germany
    Luis BAIER, German Aerospace Center, Stuttgart, Germany
    Lucas DAUTH, German Aerospace Center, Stuttgart, Germany

    person_pinEmir Ege ARDAC, German Aerospace Center, Stuttgart, Germany
    HL11:00 - 11:30 | The influence of MgO-C refractories with different types of magnesia and recyclates on non-metallic inclusions in steel meltsFlorian KERBER, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Kirsten MORITZ, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Jana HUBÁLKOVÁ, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Till M. J. STADTMÜLLER, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Thomas SCHEMMEL, Refratechnik Steel GmbH, Research & Development, Düsseldorf, Germany
    Helge JANSEN, Refratechnik Steel GmbH, Research & Development, Düsseldorf, Germany
    Christos G. ANEZIRIS, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany

    person_pinFlorian KERBER, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    11:30 - 11:45 | Advantages of unfired MgO-Cr2O3 brick for RH DegassersBárbara BORGES DE MELO, RHI MAGNESITA, Contagem, Brazil
    Carlos PAGLIOSA, RHI MAGNESITA, Contagem, Brazil
    Vanderlucio MADALENA , RHI MAGNESITA, Contagem, Brazil
    Victor PANDOLFELLI , Federal University of São Carlos (UFSCar), São Carlos, Brazil

    person_pinCarlos PAGLIOSA, RHI MAGNESITA, Contagem, Brazil
    11:45 - 12:00 | NANO GRAPHITE TECHNOLOGY FOR STEEL LADLE AND BOF: ULTRA LOW CARBON BRICKS FOR ENERGY SAVINGSCarlos PAGLIOSA, RHI MAGNESITA, Contagem, Brazil
    Bárbara BORGES, RHI MAGNESITA, Contagem, Brazil
    Marcelo BORGES, RHI MAGNESITA, Contagem, Brazil

    person_pinCarlos PAGLIOSA, RHI MAGNESITA, Contagem, Brazil
    12:00 - 12:15 | Post-mortem characterization of Al2O3-SiC-C refractory castables exposed on the main runner of blast furnacesSina DARBAN, Laboratoire Matériaux et Durabilité des Constructions, INSA/UPS Génie Civil, Université de Toulouse, CEDEX 04, 31077 Toulouse, France, Toulouse, France
    Cédric PATAPY, Laboratoire Matériaux et Durabilité des Constructions, INSA/UPS Génie Civil, Université de Toulouse, CEDEX 04, 31077 Toulouse, France, Toulouse, France
    Laurie LACARRIÈRE, Laboratoire Matériaux et Durabilité des Constructions, INSA/UPS Génie Civil, Université de Toulouse, CEDEX 04, 31077 Toulouse, France, Toulouse, France
    Martin CYR, Laboratoire Matériaux et Durabilité des Constructions, INSA/UPS Génie Civil, Université de Toulouse, CEDEX 04, 31077 Toulouse, France, Toulouse, France
    Geoffroy CHEVALLIER, CIRIMAT, Université de Toulouse, CNRS, Université Toulouse 3 Paul-Sabatier, 118 route de Narbonne, F-31062, Toulouse cedex 9, France, Toulouse, France
    Le Blond Du Plouy STEPHANE, Centre de Microcaractérisation Raimond Castaing, UMS 3623, Université de Toulouse, Espace Clément Ader, 3 rue Caroline Aigle, 31400, Toulouse, France, Toulouse, France
    Arnaud PROIETTI, Centre de Microcaractérisation Raimond Castaing, UMS 3623, Université de Toulouse, Espace Clément Ader, 3 rue Caroline Aigle, 31400, Toulouse, France, Toulouse, France
    Yannick MONVILLE, TRB - 31 rue Wilson 69150 Decines Charpieu, France, Nesles , France
    Pascal PRIGENT , TRB - 31 rue Wilson 69150 Decines Charpieu, France, Nesles , France

    person_pinSina DARBAN, Laboratoire Matériaux et Durabilité des Constructions, INSA/UPS Génie Civil, Université de Toulouse, CEDEX 04, 31077 Toulouse, France, Toulouse, France
    12:15 - 12:30 | Understanding of wear mechanism and development of innovative refractories for hazardous waste incineration using rotary kilnsArnaud DUCOULOMBIER, BONY SAS, Saint-Etinne, France
    Cyrille VARONA, BONY SAS, Saint-Etinne, France
    Xavier CHAUCHERIE, SARPI-VEOLIA, Limay, France
    Jacques POIRIER, CEMHTI - UPR3079 CNRS, Orléans, France
    François VALDIVIESO, LGF - Centre SMS UMR5307 - MINES Saint-Etienne, Saint-Etienne, France

    person_pinCyrille VARONA, BONY SAS, Saint-Etinne, France
    12:30 - 12:45 | Degradation of SiC-refractories in municipal solid waste incineration plantsClaire MENET, Veolia Recherche & Innovation (VERI), LIMAY, France
    Michel CHEVALLIER, Veolia Recherche & Innovation (VERI), LIMAY, France
    Alexandre LIMA, Veolia Recherche & Innovation (VERI), LIMAY, France
    Jean-Michel BROSSARD, Veolia Recherche & Innovation (VERI), LIMAY, France

    person_pinClaire MENET, Veolia Recherche & Innovation (VERI), LIMAY, France
    12:45 - 13:00 | Stability assessment of refractories at high temperature corrosive atmosphere as energy storage materials in solar thermal systemsN. Sena YÜZBASI, Laboratory for High Performance Ceramics, Empa, Swiss Federal Laboratories for Materials Science and Technology, Dübendorf, Switzerland
    Lukas GEISSBÜHLER, Synhelion SA, Lugano, Switzerland
    Thomas GRAULE, Laboratory for High Performance Ceramics, Empa, Swiss Federal Laboratories for Materials Science and Technology, Dübendorf, Switzerland
    Gurdial BLUGAN, Laboratory for High Performance Ceramics, Empa, Swiss Federal Laboratories for Materials Science and Technology, Dübendorf, Switzerland

    person_pinN. Sena YÜZBASI, Laboratory for High Performance Ceramics, Empa, Swiss Federal Laboratories for Materials Science and Technology, Dübendorf, Switzerland
    HL11:00 - 11:30 | Magneto Optical Glass SensorsMarcelo NALIN, Institute of Chemistry, São Paulo State University - UNESP, Araraquara, Brazil
    Douglas F. FRANCO, Institute of Chemistry, São Paulo State University - UNESP, Araraquara, Brazil
    Claudio FLORÍDIA, CPQD – Research and Development Center in Telecommunications, Campinas, Brazil
    João B. ROSOLEM, CPQD – Research and Development Center in Telecommunications, Campinas, Brazil

    person_pinMarcelo NALIN, Institute of Chemistry, São Paulo State University - UNESP, Araraquara, Brazil
    11:30 - 11:45 | SPS sintered β-Si3N4-SiO2 glass-ceramics for biomedical applicationsHuasi ZHOU,
    Cecilia PERSSON, Division of Biomedical Engineering, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden
    Håkan ENGQVIST, Division of Applied Materials Science, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden
    Wei XIA, Division of Applied Materials Science, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden

    person_pinHuasi ZHOU, Division of Applied Materials Science, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden; Division of Biomedical Engineering, Department of Materials Science and Engineering, Uppsala University, Uppsala, Sweden
    11:45 - 12:00 | Charge carrier density in ion-conducting alkali silicate glasses measurements via electrode polarizationVinicius Martins ZALLOCCO, Vitreous Materials Laboratory, São Carlos, Brazil
    João Vitor CAMPOS, Vitreous Materials Laboratory, São Carlos, Brazil
    Ana Candida Martins RODRIGUES, Vitreous Materials Laboratory, São Carlos, Brazil

    person_pinVinicius Martins ZALLOCCO, Vitreous Materials Laboratory, São Carlos, Brazil
    12:00 - 12:15 | Er3+ doped Ag2O containing glass fibersIuliia SHESTOPALOVA, Photonics Laboratory, Tampere University, Tampere, Finland
    Juho KORRI, Photonics Laboratory, Tampere University, Tampere, Finland
    Arnaud LEMIERE, Photonics Laboratory, Tampere University, Tampere, Finland
    Mikko NÄRHI, Photonics Laboratory, Tampere University, Tampere, Finland
    Regina GUMENYUK,
    Catherine BOUSSARD-PLÉDEL, Univ Rennes, Rennes, France
    Johann TROLES, Univ Rennes, Rennes, France
    Laeticia PETIT, Photonics Laboratory, Tampere University, Tampere, Finland

    person_pinIuliia SHESTOPALOVA, Photonics Laboratory, Tampere University, Tampere, Finland
    12:15 - 12:30 | Low phonon glass-ceramic materials with Ba4Er3F17 and Ba3Te4O11 nanocrystalline phasesMagdalena LESNIAK, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, A. Mickiewicza 30, 30-059 Krakow, Poland, Krakow, Poland
    Bartlomiej STARZYK, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, A. Mickiewicza 30, 30-059 Krakow, Poland, Krakow, Poland
    Gloria Lesly JIMENEZ, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, A. Mickiewicza 30, 30-059 Krakow, Poland, Krakow, Poland
    Marcin KOCHANOWICZ, Faculty of Electrical Engineering, Bialystok University of Technology, Wiejska 45D, Bialystok, Poland, Bialystok, Poland
    Marta KUWIK, Institute of Chemistry, University of Silesia, Szkolna 9, 40-007 Katowice, Poland, Katowice, Poland
    Joanna PISARSKA, Institute of Chemistry, University of Silesia, Szkolna 9, 40-007 Katowice, Poland, Katowice, Poland
    Wojciech Andrzej PISARSKI, Institute of Chemistry, University of Silesia, Szkolna 9, 40-007 Katowice, Poland, Katowice, Poland
    Dominik DOROSZ,

    person_pinMagdalena LESNIAK, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, A. Mickiewicza 30, 30-059 Krakow, Poland, Krakow, Poland
    HL11:00 - 11:30 | Low-temperature solution processing of BiFeO3 ferroelectric thin films by using sono- and photo-chemistryMaria ECHANIZ-CINTORA, Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), Madrid, Spain
    Y. Andrea RIVAS, Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), Madrid, Spain
    Ricardo JIMENEZ, Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), Madrid, Spain
    Rafael SIRERA, Universidad de Navarra, Pamplona, Spain
    Iñigo BRETOS, Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), Madrid, Spain
    M. Lourdes CALZADA, Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), Madrid, Spain

    person_pinM. Lourdes CALZADA, Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), Madrid, Spain
    11:30 - 11:45 | Magnetoelectric materials attained by the solution deposition of (1-x)BiFeO3-xPbTiO3 ferroelectric films on Ni-substratesAdriana BARRETO, Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), Madrid, Spain
    Iñigo BRETOS, Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), Madrid, Spain
    Ricardo JIMÉNEZ, Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), Madrid, Spain
    Harvey AMORÍN, Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), Madrid, Spain
    Miguel ALGUERO, Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), Madrid, Spain
    M. Lourdes CALZADA, Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), Madrid, Spain

    person_pinMiguel ALGUERO, Instituto de Ciencia de Materiales de Madrid (ICMM-CSIC), Madrid, Spain
    11:45 - 12:00 | Structure and magnetoelectric properties of epitaxial Sr-doped LaMnO3 thin films prepared by polymer assisted depositionDanica PIPER, Faculty of Technology Novi Sad, University of Novi Sad, Novi Sad, Serbia
    Jelena VUKMIROVI?, Faculty of Technology Novi Sad, University of Novi Sad, Novi Sad, Serbia
    Iva TOKOVI?, Faculty of Technology Novi Sad, University of Novi Sad, Novi Sad, Serbia
    Pavla ŠENJUG, Faculty of Science, University of Zagreb, Zagreb, Croatia
    Damir PAJIC, Faculty of Science, University of Zagreb, Zagreb, Croatia
    Marija MILANOVIC, Faculty of Technology Novi Sad, University of Novi Sad, Novi Sad, Serbia
    Stevan ARMAKOVIC, Faculty of Sciences, Univeristy of Novi Sad, Novi Sad, Serbia
    ŽEljka CVEJIC, Faculty of Sciences, Univeristy of Novi Sad, Novi Sad, Serbia
    Vladimir SRDIC, Faculty of Technology Novi Sad, University of Novi Sad, Novi Sad, Serbia

    person_pinVladimir SRDIC, Faculty of Technology Novi Sad, University of Novi Sad, Novi Sad, Serbia
    12:00 - 12:15 | Microstructure and Properties of 0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO3 Thin Films by Ethylene-Glycol Based Solution RouteSabi William KONSAGO,
    Katarina ŽIBERNA,
    Brigita KMET,
    Andreja BENCAN,
    Hana URŠIC,
    Geoff BRENNECKA, Department of Mechanical Engineering, Colorado School of Mines, Golden, Colorado 80401, United States
    Barbara MALIC,

    person_pinSabi William KONSAGO, Electronic Ceramics Department, Jožef Stefan InstituteJožef Stefan Institute, 1000 Ljubljana, Slovenia; Jožef Stefan International Postgraduate School, 1000 Ljubljana, Slovenia
    12:15 - 12:30 | Processing and Performance of Ni-Mn-Co-Oxide NTCR Thin FilmsKlaus REICHMANN, Graz University of Technology, Graz, Austria
    Sebastian REDOLFI, TDK Electronics GmbH & Co OG, Deutschlandsberg, Austria

    person_pinKlaus REICHMANN, Graz University of Technology, Graz, Austria
    11:00 - 11:15 | Investigating High-Performance Oxygen Electrodes for Micro-Solid Oxide Cells: A Combined Experimental and Numerical ApproachSilvère PANISSET,
    David JAUFFRES, Univ. Grenoble Alpes, CNRS, Grenoble INP, SIMaP, Saint-Martin-d'Heres, France
    Adeel RIAZ, Univ. Grenoble Alpes, CNRS, Grenoble INP, LMGP, Grenoble, France
    Alexander STANGL, Univ. Grenoble Alpes, CNRS, Grenoble INP, LMGP, Grenoble, France
    Monica BURRIEL, Univ. Grenoble Alpes, CNRS, Grenoble INP, LMGP, Grenoble, France

    person_pinSilvère PANISSET, Univ. Grenoble Alpes, CNRS, Grenoble INP, LMGP, Grenoble, France; Univ. Grenoble Alpes, CNRS, Grenoble INP, SIMaP, Saint-Martin-d'Heres, France
    11:15 - 11:30 | Local atomic structure and ORR kinetics of Fe-based perovskite oxides for IT-SOFCsTaeheun LIM, Pusan National University, Busan, Korea (Republic of)
    Kanghee JO, Pusan National University, Busan, Korea (Republic of)
    Seonhong LEE, Korea Institute of Ceramic Engineering and Technology, Jinju, Korea (Republic of)
    Kim YONGNAM, Korea Testing Laboratory, Seoul, Korea (Republic of)
    Lee HEESOO, Pusan National University, Busan, Korea (Republic of)
    Park BEOM-KYEONG, Pusan National University, Busan, Korea (Republic of)

    person_pinTaeheun LIM, Pusan National University, Busan, Korea (Republic of)
    11:30 - 11:45 | Microstructural and Electrochemical Characterization of Freeze Tape Cast Fuel Electrodes For Solid Oxide Cells (SOCs)Davide CADEMARTORI, Department of Civil, Chemical and Environmental Engineering, University of Genoa (UNIGE-DICCA), Genoa, Italy
    Maxime HUBERT, Univ. Grenoble Alpes, CEA, LITEN, DTCH , Grenoble, France
    Jérôme LAURENCIN, Univ. Grenoble Alpes, CEA, LITEN, DTCH , Grenoble, France
    Maria Paola CARPANESE, Department of Civil, Chemical and Environmental Engineering, University of Genoa (UNIGE-DICCA), Genoa, Italy

    person_pinDavide CADEMARTORI, Department of Civil, Chemical and Environmental Engineering, University of Genoa (UNIGE-DICCA), Genoa, Italy
    11:45 - 12:00 | Resiual stresses in anode supported BaZr(1-x)YxO(3-δ) electrolytes for solid oxide fuel cellsSol FERNÁNDEZ MUÑOZ, Departamento de Física de la Materia Condensada & Instituto de Ciencia de Materiales de Sevilla, Universidad de Sevilla-CSIC, Sevilla, Spain
    Joaquín RAMÍREZ RICO, Departamento de Física de la Materia Condensada & Instituto de Ciencia de Materiales de Sevilla, Universidad de Sevilla-CSIC, Sevilla, Spain
    Ricardo CHACARTEGUI RAMÍREZ, Departamento de Ingeniería Energética, Universidad de Sevilla, Sevilla, Spain

    person_pinSol FERNÁNDEZ MUÑOZ, Departamento de Física de la Materia Condensada & Instituto de Ciencia de Materiales de Sevilla, Universidad de Sevilla-CSIC, Sevilla, Spain
    12:00 - 12:15 | Preparation and characterization of  ytterbia stabilised zirconia for oxide ion conductors.Teresa REY WÓJCIK, Imerys Villach GbmH, Villach, Austria
    Joanna SZYMANSKA, Imerys Villach GbmH, Villach, Austria
    Paul PETSCHNIG, Imerys Villach GbmH, Villach, Austria
    Adrian VILLALBA WEINBERG, Imerys Villach GbmH, Villach, Austria
    Veronika MÜLLER, Imerys Villach GbmH, Villach, Austria
    Bruno KORNER, Imerys Villach GbmH, Villach, Austria
    Daniela JOSCHAK-ARRICH , Imerys Villach GbmH, Villach, Austria
    Sarah GRIESSER, Imerys Villach GbmH, Villach, Austria
    Michele PAVONE, Imerys Villach GbmH, Villach, Austria
    Andreas BÖRGER, Imerys Villach GbmH, Villach, Austria
    Angelika PRIESE, Imerys Murg GmbH, Laufenburg, Germany

    person_pinTeresa REY WÓJCIK, Imerys Villach GbmH, Villach, Austria
    12:15 - 12:30 | Synthesis of carbon-enriched N-doped SiOC-based electrode materials for energy storage devicesBerta PÉREZ-ROMÁN, Ceramic and glass Institute (ICV-CSIC), Madrid, Spain
    Alejandro MERCHÁN DEL REAL, Pharmacy faculty, Department of chemistry (Complutense University - UCM), Madrid, Spain
    Aitana TAMAYO , Ceramic and glass Institute (ICV-CSIC), Madrid, Spain
    Juan RUBIO , Ceramic and glass Institute (ICV-CSIC), Madrid, Spain
    Fernando RUBIO-MARCOS, Ceramic and glass Institute (ICV-CSIC), Madrid, Spain

    person_pinBerta PÉREZ-ROMÁN, Ceramic and glass Institute (ICV-CSIC), Madrid, Spain
    11:00 - 11:15 | Self-organisation phenomenology behind effective photocatalytic/photovoltaic thin filmsVilko MANDIC, Faculty of Chemical Engineering and Technology, Zagreb, Croatia
    Ivana PANŽIC, Faculty of Chemical Engineering and Technology, Zagreb, Croatia
    Ivan BRNARDIC, Faculty of Metallurgy, Sisak, Croatia
    Igor JAJCINOVIC, Faculty of Metallurgy, Sisak, Croatia
    Maja MICETIC, Ruđer Bošković Institute, Zagreb, Croatia

    person_pinVilko MANDIC, Faculty of Chemical Engineering and Technology, Zagreb, Croatia
    11:15 - 11:30 | Lead free photoactive BiFeO3-BaTiO3 solid solutions as solar water splitting photoelectrodesSina SAREMI YARAHMADI, Loughborough University, Loughborough, United Kingdom
    Thomas CLARKSON, Loughborough University, Loughborough, United Kingdom
    Hongtao ZHANG, Loughborough University, Loughborough, United Kingdom
    Bala VAIDHYANATHAN, Loughborough University, Loughborough, United Kingdom

    person_pinSina SAREMI YARAHMADI, Loughborough University, Loughborough, United Kingdom
    11:30 - 11:45 | Binder jetting of photocatalytic membranes from spray-dried granulated nanopowdersPablo ORTEGA-COLUMBRANS,
    Marco MARIANI, Department of Mechanical Engineering, Politecnico di Milano, Milano, Italy
    Ja ESCRIBANO, COLFEED4Print S.L. (Technological spin-off of the Colloidal Processing group of the Spanish National Research Council (CSIC)), Madrid, Spain
    Aj SANCHEZ-HERENCIA, Instituto de Cerámica y Vidrio (ICV-CSIC), Madrid, Spain
    Begoña FERRARI, Instituto de Cerámica y Vidrio (ICV-CSIC), Madrid, Spain
    Carmen GALASSI, Department of Mechanical Engineering, Politecnico di Milano, Milano, Italy
    Nora Francesca Maria LECIS, Department of Mechanical Engineering, Politecnico di Milano, Milano, Italy

    person_pinPablo ORTEGA-COLUMBRANS, Instituto de Cerámica y Vidrio (ICV-CSIC), Madrid, Spain; COLFEED4Print S.L. (Technological spin-off of the Colloidal Processing group of the Spanish National Research Council (CSIC)), Madrid, Spain
    11:45 - 12:00 | CuxS and CuxS-ZnS thin films for photoelectrochemical water splittingLouis OPPONG-ANTWI, School of Materials Science and Engineering, UNSW Sydney, Sydney, Australia
    Nagarajan VALANOOR, School of Materials Science and Engineering, UNSW Sydney, Sydney, Australia
    Judy HART, School of Materials Science and Engineering, UNSW Sydney, Sydney, Australia

    person_pinJudy HART, School of Materials Science and Engineering, UNSW Sydney, Sydney, Australia
    12:00 - 12:15 | Original and sustainable flux method approach to stabilize Co-doped Ga/Nb double perovskite from refractory reactantManessha VARGHESE, Institut de Chimie de la Matière Condensée de Bordeaux / Université de Bordeaux, Bordeaux, France
    Olivier TOULEMONDE, Institut de Chimie de la Matière Condensée de Bordeaux / Université de Bordeaux, Bordeaux, France

    person_pinOlivier TOULEMONDE, Institut de Chimie de la Matière Condensée de Bordeaux / Université de Bordeaux, Bordeaux, France
    HL11:00 - 11:30 | Lead antimonate in the pigments of Portuguese decorated tiles: experimental replications and scienctific characterisationMario BANDIERA , VICARTE - Glass and Ceramics for the Arts, FCT-NOVA, Caparica, Portugal
    Umberto VERONESI, VICARTE - Glass and Ceramics for the Arts, FCT-NOVA, Caparica, Portugal
    Marta MANSO,
    Alexandre PAIS, Museu Nacional do Azulejo, Lisbon , Portugal
    Lurdes ESTEVES, Museu Nacional do Azulejo, Lisbon , Portugal
    Andreia RUIVO,
    Márcia VILARIGUES,
    Susana COENTRO,

    person_pinUmberto VERONESI, VICARTE - Glass and Ceramics for the Arts, FCT-NOVA, Caparica, Portugal
    11:30 - 11:45 | Reproducing lead antimonate yellow glazes to understand ancient Middle Eastern practicesEmmie BEAUVOIT,
    Odile MAJÉRUS, Chimie ParisTech, CNRS, Institut de Recherche de Chimie Paris (IRCP), PSL Research University, Paris, France
    Daniel CAURANT, Chimie ParisTech, CNRS, Institut de Recherche de Chimie Paris (IRCP), PSL Research University, Paris, France
    Gilles WALLEZ,
    Julien CUNY, Musée du Louvre, Département des Antiquités Orientales, Paris, France
    Ariane THOMAS, Musée du Louvre, Département des Antiquités Orientales, Paris, France
    Anna PICCOLO, European Synchrotron Radiation Facility (ESRF), Grenoble, France
    Marine COTTE,
    Anne BOUQUILLON,

    person_pinEmmie BEAUVOIT, Centre de Recherche et de Restauration des Musées de France (C2RMF), Paris, France; Chimie ParisTech, CNRS, Institut de Recherche de Chimie Paris (IRCP), PSL Research University, Paris, France
    11:45 - 12:00 | Influence of glass coloring on the crystallization process of calcium antimonates in Roman glass tesseraeLéa GARDIE, Institut de Minéralogie, de Physique des Matériaux et de Cosmochimie (IMPMC), Sorbonne Université, CNRS, MNHN, IRD, Paris, France
    Laurent CORMIER, Institut de Minéralogie, de Physique des Matériaux et de Cosmochimie (IMPMC), Sorbonne Université, CNRS, MNHN, IRD, Paris, France
    Nadine SCHIBILLE, IRAMAT-CEB, Université d’Orléans, CNRS, Orléans, France

    person_pinLéa GARDIE, Institut de Minéralogie, de Physique des Matériaux et de Cosmochimie (IMPMC), Sorbonne Université, CNRS, MNHN, IRD, Paris, France
    12:00 - 12:15 | Composition and origin of early Roman polychrome mosaic glass from the collections of the Victoria & Albert MuseumLiam RICHARDS, UCL Institute of Archaeology, London, United Kingdom
    Ian FREESTONE, UCL Institute of Archaeology, London, United Kingdom
    Lucia BURGIO, V&A South Kensington, London, United Kingdom

    person_pinLiam RICHARDS, UCL Institute of Archaeology, London, United Kingdom
    12:15 - 12:30 | Characterization and interaction studies in two-layer glazed porcelain systems developed to replace lead glazes at SèvresAziliz LE BESCOND DE COATPONT,
    Gilles WALLEZ, Institut de Recherche de Chimie Paris, Paris, France
    Odile MAJERUS, Institut de Recherche de Chimie Paris, Paris, France
    Daniel CAURANT, Institut de Recherche de Chimie Paris, Paris, France
    Lucie LE BRIS, Van Cleef & Arpels, Paris, France
    Atika CHEMMI, Cité de la céramique - Sèvres et Limoges, Sèvres, France
    Lise BOUTENÈGRE, Institut de Recherche de Chimie Paris, Paris, France

    person_pinAziliz LE BESCOND DE COATPONT, Institut de Recherche de Chimie Paris, Paris, France; Van Cleef & Arpels, Paris, France
    12:30 - 12:45 | The production technology of Portuguese 16th-17th-century faience and its comparison with coeval azulejosSusana COENTRO,
    Mario BANDIERA, VICARTE - Research Unit "Glass and Ceramics for the Arts", NOVA School of Science and Technology, Caparica, Portugal
    Umberto VERONESI, VICARTE - Research Unit "Glass and Ceramics for the Arts", NOVA School of Science and Technology, Caparica, Portugal
    Victor LANCRENON,
    Alexandre N. PAIS, Museu Nacional do Azulejo, Lisbon, Portugal
    João Manuel MIMOSO, Laboratório Nacional de Engenharia Civil, Lisbon, Portugal

    person_pinSusana COENTRO, VICARTE - Research Unit "Glass and Ceramics for the Arts", NOVA School of Science and Technology, Caparica, Portugal; Department of Conservation and Restoration, NOVA School of Science and Technology, Caparica, Portugal
    12:45 - 13:00 | DECODING CERAMICS - the digital transmission of tacit knowledge in intangible cultural heritage.Anthony QUINN, Central Saint Martins - University of the Arts London, LONDON, United Kingdom
    Vilarigues MÁRCIA, VICARTE – Vidro e Cerâmica para as Artes and Deparymetn of Conservation and Restoration, NOVA School of Science and Technology, Portugal, Lisboa, Portugal

    person_pinAnthony QUINN, Central Saint Martins - University of the Arts London, LONDON, United Kingdom
    11:00 - 11:30 | Solid-state and Liquid-phase sintering: fundamental differences in densification and grain growthSuk-Joong L. KANG, Korea Advanced Institute of Science and Technology, Daejeon, Korea (Republic of)

    person_pinSuk-Joong L. KANG, Korea Advanced Institute of Science and Technology, Daejeon, Korea (Republic of)
    11:30 - 12:00 | Thermal conductivity measurements as a probe to study sintering mechanisms in oxide ceramics: hydroxyapatite, zirconia and aluminaDavid S. SMITH, University of Limoges, Institute of Research for Ceramics (IRCER), UMR CNRS 7315, 87068 Limoges, France
    Benoit NAIT-ALI, University of Limoges, Institute of Research for Ceramics (IRCER), UMR CNRS 7315, 87068 Limoges, France
    Clément GUILLET, University of Limoges, Institute of Research for Ceramics (IRCER), UMR CNRS 7315, 87068 Limoges, France
    Zonghao GUO, University of Oxford, Department of Materials, Oxford OX1 3PH, United Kingdom
    Richard I. TODD, University of Oxford, Department of Materials, Oxford OX1 3PH, United Kingdom
    Pierre LEFEUVRE, Université Polytechnique Hauts-de-France, INSA Hauts-de-France, CERAMATHS Laboratoire de Matériaux Céramiques et de Mathématiques, 59313 Valenciennes, France
    Maxence RENAUX, Université Polytechnique Hauts-de-France, INSA Hauts-de-France, CERAMATHS Laboratoire de Matériaux Céramiques et de Mathématiques, 59313 Valenciennes, France
    Anne LERICHE, Université Polytechnique Hauts-de-France, INSA Hauts-de-France, CERAMATHS Laboratoire de Matériaux Céramiques et de Mathématiques, 59313 Valenciennes, France

    person_pinDavid S. SMITH, University of Limoges, Institute of Research for Ceramics (IRCER), UMR CNRS 7315, 87068 Limoges, France
    12:00 - 12:30 | Selection of surfactants in 3-D-printing technologies: Fundamental aspects and application examplesThomas GRAULE, Empa, Laboratory for High Performance Ceramics, Duebendorf, Switzerland

    person_pinThomas GRAULE, Empa, Laboratory for High Performance Ceramics, Duebendorf, Switzerland
    12:30 - 13:00 | Improving piezoelectric ceramics by grain orientation control  Astri Bjørnetun HAUGEN, Technical University of Denmark, Kgs. Lyngby, Denmark

    person_pinAstri Bjørnetun HAUGEN, Technical University of Denmark, Kgs. Lyngby, Denmark
    HL11:00 - 11:30 | The development and application status of dental zirconia in past three decades in ChinaJianmin HAN, Peking University School and Hospital of Stomatology, Beijing , China

    person_pinJianmin HAN, Peking University School and Hospital of Stomatology, Beijing , China
    11:30 - 11:45 | Digital synergy: a 21st-century concept in digital dentistry A Dental Workflow in the Digital EraSebastjan PERKO, Medical Dentistry, clinic for comprehensive dentistry, Slovenska cesta 54, 1000 Ljubljana, Ljubljana, Slovenia
    TjašA ŽNIDARŠI?, DSLab, Digital Synergy Lab, Slovenska cesta 54, 1000 Ljubljana, Ljubljana, Slovenia
    Bojan VIDNIŠ, Medical Dentistry, clinic for comprehensive dentistry, Slovenska cesta 54, 1000 Ljubljana, Ljubljana, Slovenia
    Marko BERKOPEC, Medical Dentistry, clinic for comprehensive dentistry, Slovenska cesta 54, 1000 Ljubljana, Ljubljana, Slovenia
    Jelena BOŽIC, Medical Dentistry, clinic for comprehensive dentistry, Slovenska cesta 54, 1000 Ljubljana, Ljubljana, Slovenia
    Simon BELE, Medical Dentistry, clinic for comprehensive dentistry, Slovenska cesta 54, 1000 Ljubljana, Ljubljana, Slovenia
    Andraž KOCJAN, Department for Nanostructured materials, Jožef Stefan Institute, Jamova 39, 1000 Ljubljana, Ljubljana, Slovenia
    Shen ZHIJIAN, Department of Materials and Environmental Chemistry, Stockholm University, Stockholm, Sweden

    person_pinSebastjan PERKO, Medical Dentistry, clinic for comprehensive dentistry, Slovenska cesta 54, 1000 Ljubljana, Ljubljana, Slovenia
    11:45 - 12:00 | Pressure slip casting of multilayer blanks for dental restaurationsDaniel SCHUMACHER, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Hermsdorf, Germany
    Sabine BEGAND, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Hermsdorf, Germany

    person_pinDaniel SCHUMACHER, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Hermsdorf, Germany
    HL14:30 - 15:00 | Forming Aluminosilicate Ceramic Precursors by the Geopolymerization MethodDevon M. SAMUEL, University of Illinois at Urbana-Champaign, Department of Materials Science and Engineering,, Urbana, IL, USA
    Waltraud M. KRIVEN, University of Illinois at Urbana-Champaign, Department of Materials Science and Engineering,, Urbana, IL, USA
    Allison S. BRANDVOLD, University of Illinois at Urbana-Champaign, Department of Materials Science and Engineering,, Urbana, IL, USA

    person_pinWaltraud M. KRIVEN, University of Illinois at Urbana-Champaign, Department of Materials Science and Engineering,, Urbana, IL, USA
    15:00 - 15:15 | Geopolymer adsorbents: design and synthesisElettra PAPA, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics CNR-ISSMC (former ISTEC), Faenza, Italy
    Elena LANDI, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics CNR-ISSMC (former ISTEC), Faenza, Italy
    Annalisa NATALI MURRI, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics CNR-ISSMC (former ISTEC), Faenza, Italy
    Francesco MICCIO, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics CNR-ISSMC (former ISTEC), Faenza, Italy
    Valentina MEDRI, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics CNR-ISSMC (former ISTEC), Faenza, Italy

    person_pinElettra PAPA, National Research Council of Italy - Institute of Science, Technology and Sustainability for Ceramics CNR-ISSMC (former ISTEC), Faenza, Italy
    15:15 - 15:30 | Geopolymer adsorbents: adsorption characterizationValentina MEDRI, CNR-ISSMC (former CNR-ISTEC), Faenza, Italy
    Elena LANDI, CNR-ISSMC (former CNR-ISTEC), Faenza, Italy
    Elettra PAPA, CNR-ISSMC (former CNR-ISTEC), Faenza, Italy
    Matteo MINELLI, DICAM, University of Bologna, Bologna, Italy
    Dario FRASCARI, DICAM, University of Bologna, Bologna, Italy
    Davide PINELLI, DICAM, University of Bologna, Bologna, Italy

    person_pinValentina MEDRI, CNR-ISSMC (former CNR-ISTEC), Faenza, Italy
    15:30 - 15:45 | Pore structure investigation of freeze-tape cast phyllosilicate ceramics Poeiti LETANG, IRCER UMR CNRS 7315, University of Limoges, Limoges, France
    Gisèle Laure LECOMTE-NANA, IRCER UMR CNRS 7315, University of Limoges, Limoges, France
    Sandra ABDELOUHAB, Belgian Ceramic Research Centre, , Mons, Belgium
    Benoit NAIT-ALI, IRCER UMR CNRS 7315, University of Limoges, Limoges, France
    Maurice GONON, Materials Institute, University of Mons, Mons, Belgium
    Laetitia JOUEGO NDOHO,
    Clemence BREGEON, IRCER UMR CNRS 7315, University of Limoges, Limoges, France
    Claire PEYRATOUT, IRCER UMR CNRS 7315, University of Limoges, Limoges, France

    person_pinGisèle Laure LECOMTE-NANA, IRCER UMR CNRS 7315, University of Limoges, Limoges, France
    15:45 - 16:00 | Sons of the Moon. Forming bells of lunar regolith by slip castingRodrigo MORENO, Instituto de Cerámica y Vidrio, Madrid, Spain
    Carmen ALCÁZAR, Instituto de Cerámica y Vidrio, Madrid, Spain
    Carlos TRAGINER, Traginer Music Research Lab, Zaragoza, Spain
    Rut BENAVENTE, ITM-Universitat Politècnica de València, Valencia, Spain
    MARTÍNEZ-FRÍAS, Instituto de Geociencias, IGEO (CSIC-UCM), Madrid, Spain

    person_pinRodrigo MORENO, Instituto de Cerámica y Vidrio, Madrid, Spain
    16:00 - 16:15 | Shaping of hierarchical mesoporous silica monoliths by hard templating approach using sacrificial polymer beadsRidvan YILDIZ,
    Yannick LORGOUILLOUX, Univ. Polytechnique Hauts-de-France, INSA Hauts-de-France, CERAMATHS, F-59313 Valenciennes, France, Valenciennes, France
    Jérémy DHAINAUT, Univ. Lille, ENSCL, Centralle Lille, Univ. Artois, UMR 8181 - UCCS, F-59000 Lille, France, Lille, France
    Jean-Philippe DACQUIN, Univ. Lille, ENSCL, Centralle Lille, Univ. Artois, UMR 8181 - UCCS, F-59000 Lille, France, Lille, France
    Sébastien ROYER, Univ. Lille, ENSCL, Centralle Lille, Univ. Artois, UMR 8181 - UCCS, F-59000 Lille, France, Lille, France
    Christian COURTOIS, Univ. Polytechnique Hauts-de-France, INSA Hauts-de-France, CERAMATHS, F-59313 Valenciennes, France, Valenciennes, France

    person_pinYannick LORGOUILLOUX, Univ. Polytechnique Hauts-de-France, INSA Hauts-de-France, CERAMATHS, F-59313 Valenciennes, France, Valenciennes, France
    16:15 - 16:30 | Impact of Heating Rate and Atmosphere on Methyl-Silsesquioxane-Based Structure Fabrication  Fateme SARRAF,
    Sergey V. CHURAKOV,
    Frank CLEMENS, Empa- Swiss Federal Laboratories for Materials Science and Technology, Dübendorf, Switzerland

    person_pinFrank CLEMENS, Empa- Swiss Federal Laboratories for Materials Science and Technology, Dübendorf, Switzerland
    HL14:30 - 15:00 | Ultrafast high-temperature sintering of ceramics: from YSZ to refractory ceramicsMattia BIESUZ, University of Trento, Trento, Italy
    Emanuele DE BONA, University of Trento, Trento, Italy
    Charles MANIÈRE, CNRS Equipe Matériaux et procédés, Caen, France
    Vincenzo M. SGLAVO, University of Trento, Trento, Italy
    Claude ESTOURNE, CIRIMAT, CNRS-INP-UPS, Université Toulouse 3, Toulouse
    Thomas Herrison DE BEAUVOIR, CIRIMAT, CNRS-INP-UPS, Université Toulouse 3, Toulouse
    Levent KARACASULU, Department of Materials Science and Engineering, Izmir Institute of Technology, Izmir, Turkey
    Cekdar Vakif AHMETOGLU, Department of Materials Science and Engineering, Izmir Institute of Technology, Izmir, Turkey

    person_pinMattia BIESUZ, University of Trento, Trento, Italy
    15:00 - 15:15 | Blacklight and ultrafast high-temperature sintering of BaTiO3 and Al2O3Michael SCHERER, Technical University of Darmstadt, Department of Materials and Earth Sciences, Nonmetallic-Inorganic Materials, Darmstadt, Germany
    Zonghao GUO, University of Oxford, Department of Materials, Oxford, United Kingdom
    Lovro FULANOVIC, Technical University of Darmstadt, Department of Materials and Earth Sciences, Nonmetallic-Inorganic Materials, Darmstadt, Germany
    Richard TODD, University of Oxford, Department of Materials, Oxford, United Kingdom
    Jürgen RÖDEL, Technical University of Darmstadt, Department of Materials and Earth Sciences, Nonmetallic-Inorganic Materials, Darmstadt, Germany

    person_pinMichael SCHERER, Technical University of Darmstadt, Department of Materials and Earth Sciences, Nonmetallic-Inorganic Materials, Darmstadt, Germany
    15:15 - 15:30 | Modelling of the enhanced densification in ultra-fast high temperature sintering: impact of porosity shape
     
    Shufan WANG, Institute of Applied Powder Metallurgy and Ceramics at RWTH Aachen e. V. (IAPK), RWTH Aachen University, Aachen, Germany
    Andrey MAKSYMENKO, Department of Mechanical Engineering, San Diego State University, San Diego, United States
    Yuanbin DENG,
    Anke KALETSCH,
    Eugene OLEVSKY, Department of Mechanical Engineering, San Diego State University, San Diego, United States
    Christoph BROECKMANN,

    person_pinShufan WANG, Institute of Applied Powder Metallurgy and Ceramics at RWTH Aachen e. V. (IAPK), RWTH Aachen University, Aachen, Germany
    15:30 - 15:45 | Tailoring microstructure and properties of stereolithographic 3D-printed alumina  Anna-Katharina HOFER, Montanuniversitaet Leoben, Leoben, Austria
    Andraž KOCJAN, Jožef Stefan Institute, Ljubljana, Slovenia
    Martin SCHWENTENWEIN, Lithoz GmbH, Vienna, Austria
    Raul BERMEJO, Montanuniversitaet Leoben, Leoben, Austria

    person_pinAnna-Katharina HOFER, Montanuniversitaet Leoben, Leoben, Austria
    15:45 - 16:00 | COUPLING 3D PRINTING WITH SPARK PLASMA SINTERING (SPS): A NEW APPROACH TOWARDS THE RAPID PROTOTYPING OF ADVANCED MATERIALSRiccardo BRUCCULERI, Università di Pavia, Pavia, Italy
    Lorenzo AIROLDI, Università di Pavia, Pavia, Italy
    Primo BALDINI, Università di Pavia, Pavia, Italy
    Simone MORGANTI, Università di Pavia, Pavia, Italy
    Ferdinando AURICCHIO, Università di Pavia, Pavia, Italy
    Umberto ANSELMI-TAMBURINI, Università di Pavia, Pavia, Italy

    person_pinRiccardo BRUCCULERI, Università di Pavia, Pavia, Italy
    16:00 - 16:15 | Reactive field assisted sintering (FAST/SPS) of various garnets for plasma etching applicationsChristian STERN, Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research (IEK), Jülich, Germany
    Moritz KINDELMANN,
    Mark STAMMINGER, Ruhr University Bochum, Institute for Experimental Physics II, Bochum, Germany
    Christian SCHWAB, Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research (IEK), Jülich, Germany
    Inhee PARK, Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research (IEK), Jülich, Germany
    Martin BRAM, Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research (IEK), Jülich, Germany
    Olivier GUILLON, Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research (IEK), Jülich, Germany

    person_pinChristian STERN, Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research (IEK), Jülich, Germany
    HL14:30 - 15:00 | Ceramic stereolithography paste rheology: structural evolution under shear and vibration fluidification effectSylvain FOURNIER, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR5510, Villeurbanne, France
    Guilhem BAEZA, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR5510, Villeurbanne, France
    Thierry DOUILLARD, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR5510, Villeurbanne, France
    Mario MINALE, Dept. of Industrial and Information Engineering, Second University of Naples, Real Casa dell’Annunziata, via Roma 29, Aversa, Italy
    Claudia CAROTENUTO, Dept. of Industrial and Information Engineering, Second University of Naples, Real Casa dell’Annunziata, via Roma 29, Aversa, Italy
    Jérôme CHEVALIER, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR5510, Villeurbanne, France
    Helen REVERON, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR5510, Villeurbanne, France

    person_pinSylvain FOURNIER, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR5510, Villeurbanne, France
    15:00 - 15:15 | Why delamination cracks occur in ceramics manufactured via DLP, and how to eliminate them?Wadih YARED, IFKB - Universität Stuttgart, Stuttgart, Germany

    person_pinWadih YARED, IFKB - Universität Stuttgart, Stuttgart, Germany
    15:15 - 15:30 | What does dynamic molding do for ceramic materials?Edwin-Joffrey COURTIAL,
    Ambra PATERLINI, 3d.FAB, Univ Lyon, Université Lyon1, CNRS, INSA, CPE-Lyon, ICBMS, UMR 5246, Villeurbanne, France

    person_pinEdwin-Joffrey COURTIAL, 3d.FAB, Univ Lyon, Université Lyon1, CNRS, INSA, CPE-Lyon, ICBMS, UMR 5246, Villeurbanne, France; 3Deus Dynamics, Villeurbanne, France
    15:30 - 15:45 | SOL-GEL-DERIVED FORMULATIONS FOR THREE-DIMENSIONAL PRINTING OF CARBIDE-BASED MATERIALSAlice ZANINI, Università degli Studi di Padova, Department of Industrial Engineering, Padova, Italy
    May Yam MOSHKOVITZ, Hebrew University of Jerusalem, Casali Center for Applied Chemistry, Jerusalem, Israel
    Sara Maria CARTURAN,
    Stefano CORRADETTI, INFN, Laboratori Nazionali di Legnaro, Legnaro, Italy
    Paolo COLOMBO, Università degli Studi di Padova, Department of Industrial Engineering, Padova, Italy
    Shlomo MAGDASSI, Hebrew University of Jerusalem, Casali Center for Applied Chemistry, Jerusalem, Israel
    Giorgia FRANCHIN, Università degli Studi di Padova, Department of Industrial Engineering, Padova, Italy

    person_pinAlice ZANINI, Università degli Studi di Padova, Department of Industrial Engineering, Padova, Italy
    15:45 - 16:00 | Development of Novel Solutions for Robotic 3D Ceramic Paste Printing Tavs JORGENSEN, Univeristy of the West of England, Bristol, United Kingdom
    Sonny LIGHTFOOT, Univeristy of the West of England, Bristol, United Kingdom
    Michael JOYCE-BADEA, Univeristy of the West of England, Bristol, United Kingdom
    Farzad FARZADNIA, Univeristy of the West of England, Bristol, United Kingdom
    Michael WHITE, Univeristy of the West of England, Bristol, United Kingdom

    person_pinTavs JORGENSEN, Univeristy of the West of England, Bristol, United Kingdom
    16:00 - 16:15 | Silica-based 3D-printed porous architectures using UV-cured nanocomposite resins  Clément LAUTE, CEA Le Ripault, Monts , France
    Bruno PINTAULT, CEA Le Ripault, Monts , France
    Sylvain CHUPIN, CEA Le Ripault, Monts , France
    Denis ROCHAIS , CEA Le Ripault, Monts , France
    Clément SANCHEZ, Chimie de la Matière Condensée de Paris, Université Pierre et Marie Curie (Paris VI), Collège de France , Paris, France
    Philippe BELLEVILLE, CEA Le Ripault, Monts , France

    person_pinClément LAUTE, CEA Le Ripault, Monts , France
    16:15 - 16:30 | Two-Photon-Polymerization for Ceramics Powder ProcessingJens GÜNSTER, BAM, Berlin, Germany

    person_pinJens GÜNSTER, BAM, Berlin, Germany
    HL14:30 - 15:00 | Strategic advancements on environmental barrier coatings for SiCf/SiC compositeJingyang WANG, Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China

    person_pinJingyang WANG, Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China
    HL15:00 - 15:30 | Image-based modeling of the processing of Ceramic Matrix Composites by Chemical Vapor Infiltration with Thermal GradientsGerard VIGNOLES, LCTS - Univ. Bordeaux/CNRS/CEA/Safran, Pessac, France

    person_pinGerard VIGNOLES, LCTS - Univ. Bordeaux/CNRS/CEA/Safran, Pessac, France
    15:30 - 15:45 | Approaches for Modelling and Simulation of Ceramic Matrix CompositesSimon UNSELD, Augsburg University of Applied Sciences, Augsburg, Germany
    Ralf GOLLER, Augsburg University of Applied Sciences, Augsburg, Germany
    Dietmar KOCH, Augsburg University, Augsburg, Germany

    person_pinSimon UNSELD, Augsburg University of Applied Sciences, Augsburg, Germany
    15:45 - 16:00 | A numerical method to simulate the intra-tows mechanical behaviour of oxide/oxide CMCs: coupling of a lattice with a FE continuumThierry CANET, Institut Clement Ader (ICA) ; Université de Toulouse ; CNRS, IMT Mines Albi, INSA, ISAE-SUPAERO, UPS, Albi, France
    Gilles DUSSERRE, Institut Clement Ader (ICA) ; Université de Toulouse ; CNRS, IMT Mines Albi, INSA, ISAE-SUPAERO, UPS, Albi, France
    Thierry CUTARD, Institut Clement Ader (ICA) ; Université de Toulouse ; CNRS, IMT Mines Albi, INSA, ISAE-SUPAERO, UPS, Albi, France

    person_pinThierry CANET, Institut Clement Ader (ICA) ; Université de Toulouse ; CNRS, IMT Mines Albi, INSA, ISAE-SUPAERO, UPS, Albi, France
    16:00 - 16:15 | Implementation of a damage model for tension and bending of Ceramic Matrix Composites with statistical distribution of propertiesEdoardo NOVEMBRE, Department of Aerospace Science and Technology (DAER), Politecnico di Milano, Milan, Italy
    Alessandro AIROLDI, Department of Aerospace Science and Technology (DAER), Politecnico di Milano, Milan, Italy
    Marco RIVA, Department of Aerospace Science and Technology (DAER), Politecnico di Milano, Milan, Italy
    Antonio Maria CAPORALE, Department of Aerospace Science and Technology (DAER), Politecnico di Milano, Milan, Italy
    Lorenzo CAVALLI, Petroceramics S.p.A., Stezzano (BG), Italy
    Mario DE STEFANO FUMO, Italian Aerospace Research Centre (CIRA), Capua (CE), Italy

    person_pinEdoardo NOVEMBRE, Department of Aerospace Science and Technology (DAER), Politecnico di Milano, Milan, Italy
    16:15 - 16:30 | Solid solution mechanism in sintering of (ZrTiTaV)C high-entropy carbideChong WEI, Northwestern Polytechnical University, XI'AN, China
    Biao PENG, Northwestern Polytechnical University, XI'AN, China
    Cheng ZHANG, Northwestern Polytechnical University, XI'AN, China
    Xiaoqiang LI, Northwestern Polytechnical University, XI'AN, China

    person_pinChong WEI, Northwestern Polytechnical University, XI'AN, China
    14:30 - 14:45 | Spark Plasma Sintering of boron carbide with metal disilicidesCristina OJALVO, Department of Mechanical, Energy and Materials Engineering, University of Extremadura, 06006, Badajoz, Spain
    Víctor ZAMORA, Department of Mechanical, Energy and Materials Engineering, University of Extremadura, 06006, Badajoz, Spain
    Fernando GUIBERTEAU, Department of Mechanical, Energy and Materials Engineering, University of Extremadura, 06006, Badajoz, Spain
    Ángel Luis ORTIZ, Department of Mechanical, Energy and Materials Engineering, University of Extremadura, 06006, Badajoz, Spain

    person_pinCristina OJALVO, Department of Mechanical, Energy and Materials Engineering, University of Extremadura, 06006, Badajoz, Spain
    14:45 - 15:00 | Low temperature sintering of ultra-hard and wear resistant ceramics based on boron carbide.Víctor ZAMORA RODRÍGUEZ, University of Extremadura, Badajoz, Spain
    Francisco Javier MARTÍNEZ VÁZQUEZ, University of Seville, Seville, Spain
    Fernando GUIBERTEAU CABANILLAS, University of Extremadura, Badajoz, Spain
    Ángel Luis ORTIZ SECO, University of Extremadura, Badajoz, Spain

    person_pinVíctor ZAMORA RODRÍGUEZ, University of Extremadura, Badajoz, Spain
    15:00 - 15:15 | Silicon nitride materials with superlubricity  Mathias HERRMANN, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden , Germany
    Tobias AMMAN, Fraunhofer Institute for Mechanics of Materials IWM, Freiburg , Germany
    Eveline ZSCHIPPANG, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden , Germany
    Andreas KAILER, Fraunhofer Institute for Mechanics of Materials IWM, Freiburg , Germany

    person_pinMathias HERRMANN, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden , Germany
    15:15 - 15:30 | Silicon nitride substrates for power electronicsEveline ZSCHIPPANG, Fraunhofer IKTS, Dresden, Germany
    Lea SCHMIDTNER, Fraunhofer IKTS, Dresden, Germany
    Jonas HOERIG, Fraunhofer CSP, Halle, Germany
    Mathias HERRMANN, Fraunhofer IKTS, Dresden, Germany

    person_pinEveline ZSCHIPPANG, Fraunhofer IKTS, Dresden, Germany
    15:30 - 15:45 | Elaboration by Spark Plasma Sintering and properties of dense Si2N2O ceramics prepared with Al2O3, Y2O3 and/or Sm2O3 additivesSophie BEAUDET SAVIGNAT, CEA DAM Le Ripault, MONTS, France
    Louise SEVIN, CEA DAM Le Ripault, MONTS, France
    Nicolas LOCHET, CEA Saclay, GIF sur YVETTE, France

    person_pinSophie BEAUDET SAVIGNAT, CEA DAM Le Ripault, MONTS, France
    15:45 - 16:00 | Spark plasma sintering of tungsten boride sputtering targets: optimization and upscalingMaria WISNIEWSKA, Łukasiewicz Research Network – Poznań Institute of Technology, 6 Ewarysta Estkowskiego St., 61-755, Poznan, Poland
    Mateusz MARCZEWSKI, Łukasiewicz Research Network – Poznań Institute of Technology, 6 Ewarysta Estkowskiego St., 61-755, Poznan, Poland
    Alexander M. LAPTEV, Łukasiewicz Research Network – Poznań Institute of Technology, 6 Ewarysta Estkowskiego St., 61-755, Poznan, Poland
    Agnieszka KRAWCZYNSKA, Faculty of Materials Science and Engineering, Warsaw University of Technology, 141 Woloska St., 02-507 , Warsaw, Poland
    Malgorzata LEWANDOWSKA, Faculty of Materials Science and Engineering, Warsaw University of Technology, 141 Woloska St., 02-507 , Warsaw, Poland
    Tomasz MOSCICKI, Institute of Fundamental Technological Research Polish Academy of Sciences, 5B Pawinskiego St., 02-106, Warsaw, Poland
    Dariusz GARBIEC, Łukasiewicz Research Network – Poznań Institute of Technology, 6 Ewarysta Estkowskiego St., 61-755, Poznan, Poland

    person_pinMaria WISNIEWSKA, Łukasiewicz Research Network – Poznań Institute of Technology, 6 Ewarysta Estkowskiego St., 61-755, Poznan, Poland
    HL14:30 - 15:00 | Carbon vacancy ordering in multi-principal component (high entropy) UHTC carbidesTheresa DAVEY, Tohoku University, Sendai, Japan
    Ying CHEN, Tohoku University, Sendai, Japan

    person_pinTheresa DAVEY, Tohoku University, Sendai, Japan
    15:00 - 15:15 | High-entropy transition metal diborides for applications in harsh environmentsFrederic MONTEVERDE, ISSMC-CNR, FAENZA, Italy
    Mattia GABOARDI, Elettra - Sincrotrone Trieste S.C.p.A., Trieste, Italy
    William FAHRENHOLTZ, Missouri University of Science and Technology, Rolla, United States
    Gregory HILMAS, Missouri University of Science and Technology, Rolla, United States

    person_pinFrederic MONTEVERDE, ISSMC-CNR, FAENZA, Italy
    15:15 - 15:30 | Pressureless Sintering of Dual Phase High Entropy Boride-Carbide CeramicsSteven SMITH II, Missouri University of Science and Technology, Rolla, United States
    William FAHRENHOLTZ, Missouri University of Science and Technology, Rolla, United States
    Gregory HILMAS, Missouri University of Science and Technology, Rolla, United States

    person_pinWilliam FAHRENHOLTZ, Missouri University of Science and Technology, Rolla, United States
    15:30 - 15:45 | Processing and Characterization of Ultra High-Temperature Binary and High-Entropy BoridesSimone BARBAROSSA, Dip. Ing. Meccanica, Chimica e dei Materiali, University of Cagliari, Cagliari, Italy
    Roberto ORRU', Dip. Ing. Meccanica, Chimica e dei Materiali, University of Cagliari, Cagliari, Italy
    Giacomo CAO, Dip. Ing. Meccanica, Chimica e dei Materiali, University of Cagliari, Cagliari, Italy
    Sebastiano GARRONI, Dipartimento di Scienze Chimiche, Fisiche, Matematiche e Naturali, University of Sassari, Sassari, Italy

    person_pinRoberto ORRU', Dip. Ing. Meccanica, Chimica e dei Materiali, University of Cagliari, Cagliari, Italy
    15:45 - 16:00 | Effect of SiC on densification and mechanical properties of (Ti-Zr-Hf-Nb-Ta)B2 high entropy ceramicsVasanthakumar KOMBAMUTHU, CEMEA – Center of Excellence for Advanced Materials Applications, Slovak Academy of Sciences, Bratislava, Slovakia
    Monika TATARKOVÁ, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Bratislava, Slovakia
    Hakan ÜNSAL, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Bratislava, Slovakia
    Zdenek CHLUP, Institute of Physics of Materials, Czech Academy of Sciences, Brno, Czechia
    Alexandra KOVALCÍKOVÁ, Institute of Materials Research, Slovak Academy of Sciences, Kosice, Slovakia
    Inga ZHUKOVA, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Bratislava, Slovakia
    Hicák MICHAL, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Bratislava, Slovakia
    Ivo DLOUHÝ, Institute of Physics of Materials, Czech Academy of Sciences, Brno, Czechia
    Ján DUSZA, Institute of Materials Research, Slovak Academy of Sciences, Kosice, Slovakia
    Peter TATARKO,

    person_pinPeter TATARKO, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Bratislava, Slovakia; CEMEA – Center of Excellence for Advanced Materials Applications, Slovak Academy of Sciences, Bratislava, Slovakia
    16:00 - 16:15 | Impact of the processing conditions on the microstructure and properties of entropy stabilised ultra-high temperature carbidesChristopher BUTLER, Imperial College London, London, United Kingdom

    person_pinChristopher BUTLER, Imperial College London, London, United Kingdom
    HL14:30 - 15:00 | Mechanoluminescence of a glass/ceramic particulate composite and of an oxynitride glass-ceramicMarion DUBERNET, , Rennes, FRANCE
    Alexis DUVAL, , Rennes, FRANCE
    Patrick HOUIZOT, , Rennes, FRANCE
    Tanguy ROUXEL,

    person_pinTanguy ROUXEL, , Rennes, FRANCE; Institut Universitaire de France
    15:00 - 15:15 | Microstructural evolutions and thermomechanical properties of enameled glass for automotive applicationsAntoine LEJEUNE,
    Jérôme CHEVALIER, MatéIS INSA Lyon, Villeurbanne, France
    Philippe STEYER, MatéIS INSA Lyon, Villeurbanne, France
    Sylvain MEILLE, MatéIS INSA Lyon, Villeurbanne, France
    Laurent GREMILLARD, MatéIS INSA Lyon, Villeurbanne, France
    Juliette JAMART, Saint-Gobain Research Compiègne, Thourotte, France

    person_pinAntoine LEJEUNE, MatéIS INSA Lyon, Villeurbanne, France; Saint-Gobain Research Compiègne, Thourotte, France
    15:15 - 15:30 | Solid-state field-assisted ion exchange of Ag in lithium aluminum silicate glass-ceramicsMattia BIESUZ, University of Trento, Trento, Italy
    Vincenzo M. SGLAVO, University of Trento, Trento, Italy
    Gian D. SORARÙ, University of Trento, Trento, Italy

    person_pinMattia BIESUZ, University of Trento, Trento, Italy
    HL14:30 - 15:00 | Cold Sintering of Functional Materials and Control of Grain BoundariesClive RANDALL, The Pennsylvania State University, University Park, United States
    Arnaud NDAYISHIMIYE, The Pennsylvania State University, University Park, United States
    Zane GRADY, The Pennsylvania State University, University Park, United States
    Zhongming FAN, The Pennsylvania State University, University Park, United States
    Javier MENA GARCIA, The Pennsylvania State University, University Park, United States

    person_pinClive RANDALL, The Pennsylvania State University, University Park, United States
    15:00 - 15:15 | Exploring the Impact of Cold Sintering on Defect Chemistry, electrical and ferroelectric properties of Potassium Sodium NiobateMaryam AZADEH, Department of Materials and Earth Sciences, Technical University of Darmstadt, Darmstadt, Germany
    Marc Pascal ZAHLER, Institute of Energy and Climate Research, Materials Synthesis and Processing (IEK-1), Forschungszentrum Jülich, Jülich, Germany
    Wolfgang RHEINHEIMER, Institute of Energy and Climate Research, Materials Synthesis and Processing (IEK-1), Forschungszentrum Jülich, Jülich, Germany
    Till FRÖMLING, Department of Materials and Earth Sciences, Technical University of Darmstadt, Darmstadt, Germany

    person_pinMaryam AZADEH, Department of Materials and Earth Sciences, Technical University of Darmstadt, Darmstadt, Germany
    15:15 - 15:30 | Investigation of the influence of various parameters of (K0.5Na0.5)NbO3 cold sinteringSamir SALMANOV,
    Danjela KUŠCER,
    Mojca OTONI?AR,

    person_pinSamir SALMANOV, Jožef Stefan Institute, Ljubljana, Slovenia; Jožef Stefan International Postgraduate School, Ljubljana, Slovenia
    15:30 - 15:45 | Low temperature sintering of piezoelectric lead free (K,Na)NbO3 ceramicsChristopher CASTRO CHAVARRIA,
    Catherine ELISSALDE, ICMCB, Pessac, France
    U-Chan CHUNG SEU, ICMCB, Pessac, France
    Mario MAGLIONE, ICMCB, Pessac, France
    Bernard PLANO, IMS , Talence, France
    Hélène DEBEDA, IMS , Talence, France

    person_pinChristopher CASTRO CHAVARRIA, ICMCB, Pessac, France; IMS , Talence, France
    15:45 - 16:00 | Sinterability of NBT-based solid solutions at lower temperaturesHamed SALIMKHANI, TU Darmstadt, Darmstadt, Germany
    Till FRÖMLING , TU Darmstadt, Darmstadt, Germany

    person_pinHamed SALIMKHANI, TU Darmstadt, Darmstadt, Germany
    16:00 - 16:15 | Doped Barium Titanate: phase transformation and cold sintering processMaliha SIDDIQUI, Central European Institute of Technology, Brno University of Technology, Brno, Czechia
    Yang BAI, Microelectronics Research Unit, Faculty of Information Technology and Electrical Engineering, UniversityofOulu, Oulu, Finland
    David SALAMON, Central European Institute of Technology, Brno University of Technology, Brno, Czechia

    person_pinMaliha SIDDIQUI, Central European Institute of Technology, Brno University of Technology, Brno, Czechia
    16:15 - 16:30 | Potassium-Sodium Niobate (KNN) Powder Synthesis for Lead-Free Piezoelectric CeramicsSona HRÍBALOVÁ, University of Chemistry and Technology, Prague, Prague, Czechia
    Vojtech NECINA, University of Chemistry and Technology, Prague, Prague, Czechia
    Petra ŠIMONOVÁ, University of Chemistry and Technology, Prague, Prague, Czechia
    Lucie KOTRBOVÁ, University of Chemistry and Technology, Prague, Prague, Czechia
    Carlo BALDISSERRI, National Research Council of Italy, Institute of Science, Technology and Sustainability for Ceramics, (CNR-ISSMC, former ISTEC), Faenza, Italy
    Claudio CAPIANI, National Research Council of Italy, Institute of Science, Technology and Sustainability for Ceramics, (CNR-ISSMC, former ISTEC), Faenza, Italy
    Elisa MERCADELLI, National Research Council of Italy, Institute of Science, Technology and Sustainability for Ceramics, (CNR-ISSMC, former ISTEC), Faenza, Italy

    person_pinSona HRÍBALOVÁ, University of Chemistry and Technology, Prague, Prague, Czechia
    K14:30 - 15:00 | Advanced ceramics for green hydrogen technologyAlexander MICHAELIS, Fraunhofer Institute of Ceramic Technologies and Systems, IKTS, GERMANY

    person_pinAlexander MICHAELIS, Fraunhofer Institute of Ceramic Technologies and Systems, IKTS, GERMANY
    15:00 - 15:15 | Hydrogen production via microwave-induced water splitting at low temperatureAitor DOMÍNGUEZ, Instituto de Tecnología Química, Valencia, Spain
    Laura NAVARRETE, Instituto de Tecnología Química, Valencia, Spain
    María BALAGUER, Instituto de Tecnología Química, Valencia, Spain
    Beatriz GARCÍA, Instituto ITACA, Valencia, Spain
    Pedro José GONZALEZ, Instituto ITACA, Valencia, Spain
    David CATALÁN, Instituto de Tecnología Química, Valencia, Spain
    Joaquín SANTOS, Instituto de Tecnología Química, Valencia, Spain
    José Manuel SERRA, Instituto de Tecnología Química, Valencia, Spain
    José Manuel CATALÁ, Instituto ITACA, Valencia, Spain

    person_pinAitor DOMÍNGUEZ, Instituto de Tecnología Química, Valencia, Spain
    15:15 - 15:30 | Development of Fe-Ti solid solution oxides with improved thermal stability for 3D printing foams for green hydrogen productionErnesto CHICARDI AUGUSTO, University of Seville, Seville, Spain
    Álvaro CARMO DELCAN, University of Seville, Seville, Spain
    Ranier Enrique SEPÚLVEDA FERRER, University of Seville, Seville, Spain

    person_pinErnesto CHICARDI AUGUSTO, University of Seville, Seville, Spain
    15:30 - 15:45 | Enhanced non-oxidative propane dehydrogenation in a catalytic proton-conducting reactor.María I VALLS-ESTEVE, ITQ (UPV-CSIC) Instituto de Tecnología Química, Universitàt Politècnica de València, Consejo Superior de Investigaciones Científicas , Valencia, Spain
    Jesús ARA-BERNARD, ITQ (UPV-CSIC) Instituto de Tecnología Química, Universitàt Politècnica de València, Consejo Superior de Investigaciones Científicas , Valencia, Spain
    Sonia REMIRO-BUENAMAÑANA, ITQ (UPV-CSIC) Instituto de Tecnología Química, Universitàt Politècnica de València, Consejo Superior de Investigaciones Científicas , Valencia, Spain
    Sonia ESCOLÁSTICO-ROZALÉN, ITQ (UPV-CSIC) Instituto de Tecnología Química, Universitàt Politècnica de València, Consejo Superior de Investigaciones Científicas , Valencia, Spain
    David CATALÁN-MARTINEZ, ITQ (UPV-CSIC) Instituto de Tecnología Química, Universitàt Politècnica de València, Consejo Superior de Investigaciones Científicas , Valencia, Spain
    Julien GRAND, TotalEnergies S.E., Zone Industrielle Feluy C, One Tech, Seneffe, Belgium
    Daniel CURULLA-FERRE, TotalEnergies S.E., Zone Industrielle Feluy C, One Tech, Seneffe, Belgium
    Jose Manuel SERRA-ALFARO, ITQ (UPV-CSIC) Instituto de Tecnología Química, Universitàt Politècnica de València, Consejo Superior de Investigaciones Científicas , Valencia, Spain

    person_pinMaría I VALLS-ESTEVE, ITQ (UPV-CSIC) Instituto de Tecnología Química, Universitàt Politècnica de València, Consejo Superior de Investigaciones Científicas , Valencia, Spain
    15:45 - 16:00 | Structural and transport properties of E-beam sintered materials for catalytic membranes with selective hydrogen permeabilityYulia BESPALKO, Boreskov Institute of Catalysis, Novosibirsk, Russian Federation
    Sofiya KHARINA, Boreskov Institute of Catalysis, Novosibirsk, Russian Federation
    Nikita EREMEEV , Boreskov Institute of Catalysis, Novosibirsk, Russian Federation
    Mikhail MIKHAILENKO , Institute of Solid State Chemistry and Mechanochemistry, Novosibirsk, Russian Federation
    Mikhail KOROBEYNIKOV , Budker Institute of Nuclear Physics, Novosibirsk, Russian Federation
    Artem ULIHIN , Institute of Solid State Chemistry and Mechanochemistry, Novosibirsk, Russian Federation
    Vladislav SADYKOV, Boreskov Institute of Catalysis, Novosibirsk, Russian Federation

    person_pinYulia BESPALKO, Boreskov Institute of Catalysis, Novosibirsk, Russian Federation
    16:00 - 16:15 | Enhancing the performance of Ce0.8Gd0.2O2-d-FeCo2O4 dual phase membrane by feasible tuning of sintering profileFanlin ZENG, Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research (IEK), Jülich, Germany
    Jürgen MALZBENDER, Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research (IEK), Jülich, Germany
    Wilhelm Albert MEULENBERG,
    Stefan BAUMANN, Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research (IEK), Jülich, Germany

    person_pinFanlin ZENG, Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research (IEK), Jülich, Germany
    16:15 - 16:30 | Amorphization, surface roughness and hydrogen permeability of carbon-doped TiZrN coaitngs by laser carburizationSeonghoon KIM, Pusan National University, Busan, Korea (Republic of)
    Seungjae LEE, Pusan National University, Busan, Korea (Republic of)
    Youngkue CHOI, Mechanical & Material Technology Center, Korea Testing Laboratory, Jinju, Korea (Republic of)
    Eui-Jong LEE, Future Integrated Technology Division, Korea Testing Laboratory, Jinju, Korea (Republic of)
    Heesoo LEE, Pusan National University, Busan, Korea (Republic of)

    person_pinSeonghoon KIM, Pusan National University, Busan, Korea (Republic of)
    K14:30 - 15:00 | Brazing of sintered SiC and SiC/SiC composites for power generation  Valerie CHAUMAT, Univ. Grenoble Alpes, CEA, Liten, DTCH, GRENOBLE, France
    Olivier GILLIA, Univ. Grenoble Alpes, CEA, Liten, DTCH, GRENOBLE, France
    Christophe LORRETTE, Université Paris-Saclay, CEA, Service de Recherche en Matériaux et procédés Avancés, Gif-sur-Yvette, France

    person_pinValerie CHAUMAT, Univ. Grenoble Alpes, CEA, Liten, DTCH, GRENOBLE, France
    15:00 - 15:15 | Material selection and development of corrosion resistant ceramic coatings for nuclear and aerospace applicationsMichael FARNHAM, Archer Technicoat Ltd, High Wycombe, United Kingdom
    Junliang LIU, Oxford University, Oxford, United Kingdom
    David ARMSTRONG, Oxford University, Oxford, United Kingdom
    Jack LYONS, Archer Technicoat Ltd, High Wycombe, United Kingdom
    Calvin PRENTICE, Archer Technicoat Ltd, High Wycombe, United Kingdom
    Ryan SKILLETT, Archer Technicoat Ltd, High Wycombe, United Kingdom

    person_pinMichael FARNHAM, Archer Technicoat Ltd, High Wycombe, United Kingdom
    15:15 - 15:30 | Synthesis and sintering of homogenous Hf(1-x)MIII(x)O(2-x/2) ceramics as solid electrolytes for oxygen sensors in liquid sodium Claire CANAS, CEA-DES-IRESNE-DTN Cadarache, Saint-Paul-lez-Durance, France
    Thomas COLOMBEAU-BÉDOS, ICSM, Univ Montpellier, CEA, CNRS, ENSCM, Site de Marcoule, Bagnols-sur-Cèze, France
    Nicolas CLAVIER, ICSM, Univ Montpellier, CEA, CNRS, ENSCM, Site de Marcoule, Bagnols-sur-Cèze, France
    Laurent BRISSONNEAU, CEA-DES-IRESNE-DTN Cadarache, Saint-Paul-lez-Durance, France
    Nicolas DACHEUX, ICSM, Univ Montpellier, CEA, CNRS, ENSCM, Site de Marcoule, Bagnols-sur-Cèze, France

    person_pinClaire CANAS, CEA-DES-IRESNE-DTN Cadarache, Saint-Paul-lez-Durance, France
    15:30 - 15:45 | Development of an innovative nuclear fuel UO2 doped by redox bufferShalane GOBERT, CEA, Cadarache, France
    Fabienne AUDUBERT, CEA, Cadarache, France
    Jean-Marc HEINTZ, ICMCB, Pessac, France

    person_pinShalane GOBERT, CEA, Cadarache, France
    15:45 - 16:00 | Microstructure and thermal behaviour investigation of UO2 ceramics with a highly developed porosity networkLéo MOUTIN, CEA, Saint-Paul-lez-Durance, France
    Renaud MASSON, CEA, Saint-Paul-lez-Durance, France
    Michel BORNERT, Laboratoire Navier, Marne-la-Vallée, France
    Christelle DUGUAY, CEA, Saint-Paul-lez-Durance, France
    Vincent BOUINEAU, CEA, Saint-Paul-lez-Durance, France
    Laurent FAYETTE, CEA, Saint-Paul-lez-Durance, France
    Marc JOSIEN, CEA, Saint-Paul-lez-Durance, France
    Frédéric ADENOT, CEA, Saint-Paul-lez-Durance, France

    person_pinChristelle DUGUAY, CEA, Saint-Paul-lez-Durance, France
    16:00 - 16:15 | Investigations of the ageing behaviour of organic additives used in the manufacturing of MOX nuclear fuelsLéa GIROUSSENS, CEA/DES/ISEC/DMRC, Université de Montpellier, Bagnols-sur-Cèze, France
    Franck DOREAU, CEA/DES/ISEC/DMRC, Université de Montpellier, Bagnols-sur-Cèze, France
    Estelle MARC, Orano Melox, Chusclan, France
    Thierry GERVAIS, Orano Melox, Chusclan, France
    Guillaume BERNARD-GRANGER, CEA/DES/ISEC/DMRC, Université de Montpellier, Bagnols-sur-Cèze, France

    person_pinLéa GIROUSSENS, CEA/DES/ISEC/DMRC, Université de Montpellier, Bagnols-sur-Cèze, France
    HL14:30 - 15:00 | Non-Invasive On-site Analysis of Coloring Agents, Marks and Enamels of Qing imperial porcelainPhilippe COLOMBAN, Sorbonne Université, MONARIS UMR8233 CNRS, Paris, France
    Gulsu SIMSEK FRANCI, Sorbonne Université, MONARIS UMR8233 CNRS, Paris, France

    person_pinPhilippe COLOMBAN, Sorbonne Université, MONARIS UMR8233 CNRS, Paris, France
    15:00 - 15:15 | Boron/Lithium-based flux in 18th Century Chinese porcelain enamels: PIXE/PIGE study.Jacques BURLOT, MONARIS UMR8233, Sorbonne Université, Paris, France
    Ludovic BELLOT-GURLET, MONARIS UMR8233, Sorbonne Université, Paris, France
    Quentin LEMASSON, Centre de Recherche et de Restauration des Musées de France (C2RMF), Paris, France
    Laurent PICHON, Centre de Recherche et de Restauration des Musées de France (C2RMF), Paris, France
    Philippe COLOMBAN, MONARIS UMR8233, Sorbonne Université, CNRS, Paris, France

    person_pinJacques BURLOT, MONARIS UMR8233, Sorbonne Université, Paris, France
    15:15 - 15:30 | Study of the yellow coloration of stained glass and contribution of portable spectroscopiesDéa JAÏS, Sorbonne Université, CNRS, Museum National d’Histoire Naturelle, Institut de Minéralogie, de Physique des Matériaux et de Cosmochimie (IMPMC), IRD, Paris, France
    Laurence GALOISY, Sorbonne Université, CNRS, Museum National d’Histoire Naturelle, Institut de Minéralogie, de Physique des Matériaux et de Cosmochimie (IMPMC), IRD, Paris, France
    Georges CALAS, Sorbonne Université, CNRS, Museum National d’Histoire Naturelle, Institut de Minéralogie, de Physique des Matériaux et de Cosmochimie (IMPMC), IRD, Paris, France
    Claudine LOISEL, Laboratoire de Recherche des Monuments Historiques, CRC, Ministère de la Culture, Champs-sur-Marne, France
    Barbara TRICHEREAU, Laboratoire de Recherche des Monuments Historiques, CRC, Ministère de la Culture, Champs-sur-Marne, France

    person_pinDéa JAÏS, Sorbonne Université, CNRS, Museum National d’Histoire Naturelle, Institut de Minéralogie, de Physique des Matériaux et de Cosmochimie (IMPMC), IRD, Paris, France
    15:30 - 15:45 | A photoluminescence- based method to sort the colourless Roman glass  Nadège OLLIER, LSI/ CEA/IP Paris, Palaiseau, France
    Jacques DE GARIDEL-THORON, LSI/ CEA/IP Paris, Palaiseau, France
    Florent GOULETTE, LSI/ CEA/IP Paris, Palaiseau, France
    Lisa SHAFROTH, LSI/ CEA/IP Paris, Palaiseau, France
    Bernard GRATUZE, IRAMAT CNRS, Orléans, France
    Aurore LOUIS, INRAP, Champagne Ardenne, France

    person_pinNadège OLLIER, LSI/ CEA/IP Paris, Palaiseau, France
    15:45 - 16:00 | Tangible facets of the art of painting glass slides for projection by magic lanternsMarcia VILARIGUES, VICARTE & DCR, NOVA School of Science and Technology, Almada, Portugal
    Vanessa OTERO, DCR, NOVA School of Science and Technology, Almada, Portugal
    Andreia RUIVO, VICARTE & DCR, NOVA School of Science and Technology, Almada, Portugal
    Carla MACHADO, VICARTE & DCR, NOVA School of Science and Technology, Almada, Portugal

    person_pinMarcia VILARIGUES, VICARTE & DCR, NOVA School of Science and Technology, Almada, Portugal
    14:30 - 15:00 | Joining and integration issues of ceramics and ceramic matrix composites  Monica FERRARIS, POLITECNICO DI TORINO, TORINO, Italy

    person_pinMonica FERRARIS, POLITECNICO DI TORINO, TORINO, Italy
    15:00 - 15:30 | Biophysical stimulation of stem cells on functional bioceramics: in vitro and in silico studiesBikramjit BASU, Indian Institute of Science, Bangalore, Karnataka, India, Bangalore, India

    person_pinBikramjit BASU, Indian Institute of Science, Bangalore, Karnataka, India, Bangalore, India
    15:30 - 16:00 | Molecule-like lanthanide-oxide clusters in ZnOGunnar WESTIN, Uppsala University, Uppsala, Sweden

    person_pinGunnar WESTIN, Uppsala University, Uppsala, Sweden
    16:00 - 16:30 | Ceramic all-solid-state lithium batteries:Facing the challenges by innovative manufacturing processes Olivier GUILLON, Forschungszentrum Jülich, Jülich, Germany
    Christoph ROITZHEIM, Forschungszentrum Jülich, Jülich, Germany
    Martin FINSTERBUSCH, Forschungszentrum Jülich, Jülich, Germany
    Dina FATTAKHOVA-ROHLFING, Forschungszentrum Jülich, Jülich, Germany

    person_pinChristoph ROITZHEIM, Forschungszentrum Jülich, Jülich, Germany
    HL14:30 - 15:00 | Testing of mechanical properties of dental ceramics: methods for classical and additively manufactured materialsTanja LUBE, Montanuniversitaet Leoben, Department of Materials Science, Leoben, Austria
    Maximilian STAUDACHER, Montanuniversitaet Leoben, Department of Materials Science, Leoben, Austria
    Peter SUPANCIC, Montanuniversitaet Leoben, Department of Materials Science, Leoben, Austria
    Uwe SCHEITHAUER, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden, Germany

    person_pinTanja LUBE, Montanuniversitaet Leoben, Department of Materials Science, Leoben, Austria
    15:00 - 15:15 | Lithography-based 3D printing of lithium disilicate ceramics for dental restorations  Serkan NOHUT,
    Sebastian GEIER, Lithoz GmbH, Mollardgasse 85a/2/64-69, A-1060, Vienna, Austria, Vienna, Austria
    Daniel BOMZE, Lithoz GmbH, Mollardgasse 85a/2/64-69, A-1060, Vienna, Austria, Vienna, Austria
    Martin SCHWENTENWEIN, Lithoz GmbH, Mollardgasse 85a/2/64-69, A-1060, Vienna, Austria, Vienna, Austria

    person_pinSerkan NOHUT, Lithoz GmbH, Mollardgasse 85a/2/64-69, A-1060, Vienna, Austria, Vienna, Austria; Department of Mechanical Engineering, Piri Reis University, 34940, Istanbul, Turkey, Istanbul, Turkey
    15:15 - 15:30 | Ceramic additive manufacturing for minimally invasive applications in prosthetic dentistryFranziska SCHMIDT, Charité Universitätsmedizin Berlin, Dept. for Prosthodontics, Berlin, Germany
    Alexey UNKOVSKIY, Charité Universitätsmedizin Berlin, Dept. for Prosthodontics, Berlin, Germany
    Daniel BOMZE, Lithoz GmbH, Vienna, Austria
    Jeremias HEY, Universitätsklinikum Halle (Saale), , Halle (Saale), Germany
    Florian BEUER, Charité Universitätsmedizin Berlin, Dept. for Prosthodontics, Berlin, Germany

    person_pinFranziska SCHMIDT, Charité Universitätsmedizin Berlin, Dept. for Prosthodontics, Berlin, Germany
    15:30 - 15:45 | Mechanical properties of additively-manufactured surface-treated 3Y and 5Y zirconiaTadej MIRT, Department of Prosthodontics, Faculty of Medicine, University of Ljubljana, Ljubljana, Slovenia
    Andraž KOCJAN, Department for Nanostructured Materials, Jožef Stefan Institute, Ljubljana, Slovenia
    Raul BERMEJO, Institut für Struktur- und Funktionskeramik, Montanuniversität Leoben, Leoben, Austria
    Peter JEVNIKAR, Department of Prosthodontics, Faculty of Medicine, University of Ljubljana, Ljubljana, Slovenia

    person_pinTadej MIRT, Department of Prosthodontics, Faculty of Medicine, University of Ljubljana, Ljubljana, Slovenia
    15:45 - 16:00 | Supercritical Carbon Dioxide as a Solvent in Debinding Stereolithography PrintsNonna NURMI, Faculty of Engineering and Natural Sciences, Tampere University, Tampere, Finland
    Erkka FRANKBERG, Faculty of Engineering and Natural Sciences, Tampere University, Tampere, Finland
    Antonia RESSLER, Faculty of Engineering and Natural Sciences, Tampere University, Tampere, Finland
    Piie KONNUNAHO, Faculty of Engineering and Natural Sciences, Tampere University, Tampere, Finland
    Erkki LEVÄNEN, Faculty of Engineering and Natural Sciences, Tampere University, Tampere, Finland

    person_pinNonna NURMI, Faculty of Engineering and Natural Sciences, Tampere University, Tampere, Finland
    16:00 - 16:15 | Effect of the acid corrosion surface modification on 3Y-TZP zirconia ceramics for dental applicationsAleksandra NOWICKA, FunGlass, A. Dubcek University of Trencin, Trencin, Slovakia
    Helen REVERON, Université de Lyon, INSA-Lyon, MATEIS, Lyon, France
    Jaroslava MICHÁLKOVÁ, FunGlass, A. Dubcek University of Trencin, Trencin, Slovakia
    Dagmar GALUSKOVÁ, FunGlass, A. Dubcek University of Trencin, Trencin, Slovakia
    DušAn GALUSEK,

    person_pinAleksandra NOWICKA, FunGlass, A. Dubcek University of Trencin, Trencin, Slovakia
    17:00 - 17:15 | Awareness of chemical nature of additives used in colloidal processing of ceramics - why is it so important?Paulina WIECINSKA, Warsaw University of Technology, Faculty of Chemistry , Warsaw , Poland
    Anna WIECLAW-MIDOR, Warsaw University of Technology, Faculty of Chemistry , Warsaw , Poland
    Joanna TANSKA, Warsaw University of Technology, Faculty of Chemistry , Warsaw , Poland
    Pawel FALKOWSKI, Warsaw University of Technology, Faculty of Chemistry , Warsaw , Poland
    Radoslaw ZUROWSKI, Warsaw University of Technology, Faculty of Chemistry , Warsaw , Poland

    person_pinPaulina WIECINSKA, Warsaw University of Technology, Faculty of Chemistry , Warsaw , Poland
    17:15 - 17:30 | The impact of powder properties on powder flow and rheological characteristics for high-purity alumina.Erin VALENZUELA-HEEGER, University of Birmingham, Birmingham, United Kingdom
    Jon BINNER, University of Birmingham, Birmingham, United Kingdom

    person_pinErin VALENZUELA-HEEGER, University of Birmingham, Birmingham, United Kingdom
    17:30 - 17:45 | Optimization and tape casting performance of porous NiO-YSZ formulations.Antonio ALONSO,
    Jose Manuel SERRA, Institute of Chemical Technology (UPV-CSIC), Valencia, Spain
    Rodrigo MORENO, Institute of Ceramic and Glass (CSIC), Madrid, Spain
    Laura NAVARRETE, Institute of Chemical Technology (UPV-CSIC), Valencia, Spain
    Manuela SALES, Institute of Chemical Technology (UPV-CSIC), Valencia, Spain
    Pau SINTES, Institute of Chemical Technology (UPV-CSIC), Valencia, Spain
    Ramón CALABUIG, Institute of Chemical Technology (UPV-CSIC), Valencia, Spain

    person_pinAntonio ALONSO, Institute of Chemical Technology (UPV-CSIC), Valencia, Spain; Institute of Ceramic and Glass (CSIC), Madrid, Spain
    17:45 - 18:00 | SRD-MD simulations of colloidal suspensions in flowHanady SEMAAN,
    Manuella CERBELAUD, Université de Limoges, CNRS, IRCER, UMR 7315, Limoges, France
    Arnaud VIDECOQ, Université de Limoges, CNRS, IRCER, UMR 7315, Limoges, France
    Benoît CRESPIN, Université de Limoges, XLIM/ASALI, UMR CNRS 7252, Limoges, France

    person_pinHanady SEMAAN, Université de Limoges, CNRS, IRCER, UMR 7315, Limoges, France; Université de Limoges, XLIM/ASALI, UMR CNRS 7252, Limoges, France
    18:00 - 18:15 | In silico invesigation of the size dispersity on the colloidal arrangementManuella CERBELAUD, IRCER, Limoges, France
    Hanady SEMAAN,
    Fabien MORTIER , IRCER, Limoges, France
    Julien GERHARDS, IRCER, Limoges, France
    Benoit CRESPIN, Xlim, France, France
    Arnaud VIDECOQ, IRCER, Limoges, France

    person_pinManuella CERBELAUD, IRCER, Limoges, France
    18:15 - 18:30 | Synthesis of bioactive glasses based on an eco-friendly method employing microwavesEugeni CAÑAS, Instituto Universitario de Tecnología Cerámica - Universitat Jaume I, Castellón, Spain
    Amparo BORRELL, Instituto de Tecnología de Materiales - Universitat Politècnica de València, Valencia, Spain
    Rut BENAVENTE, Instituto de Tecnología de Materiales - Universitat Politècnica de València, Valencia, Spain
    Mª Dolores SALVADOR, Instituto de Tecnología de Materiales - Universitat Politècnica de València, Valencia, Spain

    person_pinEugeni CAÑAS, Instituto Universitario de Tecnología Cerámica - Universitat Jaume I, Castellón, Spain
    18:30 - 18:45 | Drying rate of ceramic green bodies - influence of powder characteristics and organic additivesBenoit NAIT-ALI, University of Limoges - IRCER, Limoges, France
    Lisa GIARDI, University of Limoges - IRCER, Limoges, France
    Julie BOURRET, University of Limoges - IRCER, Limoges, France
    Khoi PHAM, University of Limoges - IRCER, Limoges, France
    David SMITH, University of Limoges - IRCER, Limoges, France

    person_pinBenoit NAIT-ALI, University of Limoges - IRCER, Limoges, France
    18:45 - 19:00 | Freeze-casting uniformity and domainsRasmus BJØRK, Technical University of Denmark, Kgs. Lyngby, Denmark
    Peter Stanley JØRGENSEN, Technical University of Denmark, Kgs. Lyngby, Denmark

    person_pinRasmus BJØRK, Technical University of Denmark, Kgs. Lyngby, Denmark
    17:00 - 17:15 | Transparent Eu:La2Zr2O7 ceramics by spark plasma sintering (SPS): The effect of LiFVojtech NECINA, Department of Glass and Ceramics, University of Chemistry and Technology, Prague, Technická 5, 166 28, Prague, Czech Republic, Prague, Czechia
    Jan MRÁZEK, Institute of Photonics and Electronics, Czech Academy of Sciences, Chaberská 1014/57, 182 00, Prague, Czech Republic, Prague, Czechia
    Willi PABST, Department of Glass and Ceramics, University of Chemistry and Technology, Prague, Technická 5, 166 28, Prague, Czech Republic, Prague, Czechia
    Petra ŠIMONOVÁ, Department of Glass and Ceramics, University of Chemistry and Technology, Prague, Technická 5, 166 28, Prague, Czech Republic, Prague, Czechia

    person_pinVojtech NECINA, Department of Glass and Ceramics, University of Chemistry and Technology, Prague, Technická 5, 166 28, Prague, Czech Republic, Prague, Czechia
    17:15 - 17:30 | Evaluation of the reoxidation process of rare-earth pyrochlores sintered by Spark Plasma SinteringEmerson Luiz DOS SANTOS VEIGA, Universitat Jaume I, Castellón de la Plana, Spain
    Sébastien FOURCADE, University of Bordeaux, CNRS, ICMCB, Bordeaux, France
    Dominique MICHAU, University of Bordeaux, CNRS, ICMCB, Bordeaux, France
    U-Chan CHUNG SEU, University of Bordeaux, CNRS, ICMCB, Bordeaux, France
    Catherine ELISSALDE, University of Bordeaux, CNRS, ICMCB, Bordeaux, France
    Fabrice MAUVY, University of Bordeaux, CNRS, ICMCB, Bordeaux, France
    Héctor BELTRÁN-MIR, Universitat Jaume I, Castellón de la Plana, Spain
    Eloisa CORDONCILLO, Universitat Jaume I, Castellón de la Plana, Spain

    person_pinEmerson Luiz DOS SANTOS VEIGA, Universitat Jaume I, Castellón de la Plana, Spain
    17:30 - 17:45 | Improved Functionality of the Spark Plasma Sintering (SPS) - TechnologyLars HELLDAHL, Kagaku Analys AB, Goteborg, Sweden
    Besira MIHIRETIE, Kagaku Analys AB, Goteborg, Sweden
    Shinichi SUZUKI, Suga Co. Ltd, Hakodate, Japan

    person_pinLars HELLDAHL, Kagaku Analys AB, Goteborg, Sweden
    17:45 - 18:00 | U-FAST Technology – new materials for industryDamian KARPOWICZ, GeniCore Sp. z o.o., Warsaw, Poland

    person_pinDamian KARPOWICZ, GeniCore Sp. z o.o., Warsaw, Poland
    18:00 - 18:15 | Strategies to Prevent Carbon Contamination of Transparent Magnesium Aluminate Spinel during Spark Plasma SinteringAli TALIMIAN, Centre for Functional and Surface Functionalised Glass, Alexander Dubček University of Trenčín, Študentská 2, Trencin, Slovakia
    Vaclav POUCLY,
    Robert KLEMENT,
    Ana M. BETLRÁN, Departamento de Ingeniería y Ciencia de los Materiales y del Transporte, Escuela Politécnica Superior, Universidad de Sevilla, 41011, Sevilla, Spain
    Karel MACA,
    Dusan GALUSEK ,

    person_pinAli TALIMIAN, Centre for Functional and Surface Functionalised Glass, Alexander Dubček University of Trenčín, Študentská 2, Trencin, Slovakia
    18:15 - 18:30 | Latest Developments and Trends for the Industrial Application of FAST/SPS TechniqueBenjamin LUTHARDT, FCT Systeme GmbH, Frankenblick, Germany

    person_pinBenjamin LUTHARDT, FCT Systeme GmbH, Frankenblick, Germany
    18:30 - 18:45 | Latest capabilities in Hot Isostatic Pressing, HIP, for Advanced, Technical Ceramics Anders MAGNUSSON, Quintus Technologies, Västerås, Västmanland County, Sweden, Sweden
    Magnus AHLFORS, Quintus Technologies, Västerås, Västmanland County, Sweden, Sweden
    James SHIPLEY, Quintus Technologies, Västerås, Västmanland County, Sweden, Sweden

    person_pinAnders MAGNUSSON, Quintus Technologies, Västerås, Västmanland County, Sweden, Sweden
    17:00 - 17:15 | Understanding process/material interactions for the additive manufacturing by selective laser melting of lunar regolithJulien GRANIER,
    Thierry CUTARD, Institut Clément Ader (ICA) ; Université de Toulouse ; CNRS, IMT Mines Albi, INSA, ISAE-SUPAERO, UPS, Albi, France
    Patrick PINET, Institut de Recherche en Astrophysique et Planétologie (IRAP), CNRS/CNES, Observatoire Midi-Pyrénées, Université de Toulouse, Toulouse, France
    Yannick LE MAOULT, Institut Clément Ader (ICA) ; Université de Toulouse ; CNRS, IMT Mines Albi, INSA, ISAE-SUPAERO, UPS, Albi, France
    Serge CHEVREL, Institut de Recherche en Astrophysique et Planétologie (IRAP), CNRS/CNES, Observatoire Midi-Pyrénées, Université de Toulouse, Toulouse, France
    Thierry SENTENAC, Institut Clément Ader (ICA) ; Université de Toulouse ; CNRS, IMT Mines Albi, INSA, ISAE-SUPAERO, UPS, Albi, France

    person_pinJulien GRANIER, Institut Clément Ader (ICA) ; Université de Toulouse ; CNRS, IMT Mines Albi, INSA, ISAE-SUPAERO, UPS, Albi, France; Institut de Recherche en Astrophysique et Planétologie (IRAP), CNRS/CNES, Observatoire Midi-Pyrénées, Université de Toulouse, Toulouse, France
    17:15 - 17:30 | Selective Laser Melting of Alumina: Process Parameters Optimization and Mechanical Performance Evaluation?Mohamed ABDELMOULA, University of Wisconsin-Milwaukee, Wisconsin, United States
    Gökhan KÜÇÜKTÜRK, Gazi Univeristy , ANKARA, Turkey
    Enrique JUSTE, Belgium Ceramic Reserach Center , Mons, Belgium
    Fabrice PETIT, Belgium Ceramic Reserach Center , Mons, Belgium

    person_pinMohamed ABDELMOULA, University of Wisconsin-Milwaukee, Wisconsin, United States
    17:30 - 17:45 | Processing and sintering of ceramic pieces by Fused Filament Fabrication using a 3D-printable Al2O3 filament.Caterina CHIRICO, Institute for Ceramic and Glass, Madrid, Spain
    Alvaro EGUILUZ, Institute for Ceramic and Glass, Madrid, Spain
    Pablo ORTEGA , Institute for Ceramic and Glass, Madrid, Spain
    Ana FERRANDEZ, Institute for Ceramic and Glass, Madrid, Spain
    Begoña FERRARI, Institute for Ceramic and Glass, Madrid, Spain
    Antonio Javier SANCHEZ, Institute for Ceramic and Glass, Madrid, Spain

    person_pinCaterina CHIRICO, Institute for Ceramic and Glass, Madrid, Spain
    17:45 - 18:00 | Co-sintering of YSZ-LSM Electrodes and YSZ electrolytes fabricated by 3D printingIsabel María PELÁEZ TIRADO, institute for renewable energies, Universidad de Castilla-la Mancha, Albacete, Spain
    Juan Carlos PÉREZ FLORES, institute for renewable energies, Universidad de Castilla-la Mancha, Albacete, Spain
    Juan Ramón MARÍN RUEDA , institute for renewable energies, Universidad de Castilla-la Mancha, Albacete, Spain
    José Miguel RAMOS FAJARDO, institute for renewable energies, Universidad de Castilla-la Mancha, Albacete, Spain
    Miguel CASTRO GARCÍA, institute for renewable energies, Universidad de Castilla-la Mancha, Albacete, Spain
    Jesús CANALES VÁSQUEZ , institute for renewable energies, Universidad de Castilla-la Mancha, Albacete, Spain

    person_pinIsabel María PELÁEZ TIRADO, institute for renewable energies, Universidad de Castilla-la Mancha, Albacete, Spain
    18:00 - 18:15 | FAST/SPS: NEW industrial post-process for full densification of 3D complex shape from additive manufacturingArnaud FREGEAC, NORIMAT, Toulouse, France
    Jennifer MACKIE, NORIMAT, Toulouse, France
    Yannick BEYNET, NORIMAT, Toulouse, France
    Romain EPHERRE, NORIMAT, Toulouse, France

    person_pinArnaud FREGEAC, NORIMAT, Toulouse, France
    18:15 - 18:30 | Ultra-rapid debinding and sintering of additively manufactured ceramics by ultrafast high-temperature sintering  Subhadip BHANDARI, Department of Industrial Engineering, University of Padova, Via Marzolo 9, 35131 , Padova, Italy
    Charles MANIERE, ENSICAEN, UNICAEN, CNRS, CRISMAT, Normandie Univ, Caen, France
    Francesco SEDONA, Department of Chemical Sciences, University of Padova, Via Marzolo 1, 35131, Padova, Italy
    Emanuele DE BONA, Department of Industrial Engineering, University of Trento, Via Sommarive 9, 38122 , Trento, Italy
    Vincenzo SGLAVO,
    Paolo COLOMBO,
    Mattia BIESUZ, Department of Industrial Engineering, University of Trento, Via Sommarive 9, 38122 , Trento, Italy
    Giorgia FRANCHIN, Department of Industrial Engineering, University of Padova, Via Marzolo 9, 35131 , Padova, Italy

    person_pinSubhadip BHANDARI, Department of Industrial Engineering, University of Padova, Via Marzolo 9, 35131 , Padova, Italy
    18:30 - 18:45 | From robocasting of inks based on boron-doped SiC particles to tailored Spark Plasma Sintering of 3D SiC partsMaxime CHEYPE, Institute of Research for Ceramics, Limoges, France
    Fabrice ROSSIGNOL, Institute of Research for Ceramics, Limoges, France
    Vincent PATELOUP, Institute of Research for Ceramics, Limoges, France
    Claude ESTOURNÈS, CIRIMAT, Toulouse, France
    Samuel BERNARD, Institute of Research for Ceramics, Limoges, France

    person_pinMaxime CHEYPE, Institute of Research for Ceramics, Limoges, France
    18:45 - 19:00 | Development of acrylate-based suspensions for DLP suitable for the pyrolysis-based binder removal processPremysl ŠTASTNÝ, Central European Institute of Technology, CEITEC BUT, Brno, Czechia
    Daniel DRDLÍK, Central European Institute of Technology, CEITEC BUT, Brno, Czechia
    Klára CÁSTKOVÁ, Central European Institute of Technology, CEITEC BUT, Brno, Czechia
    Martin TRUNEC, Central European Institute of Technology, CEITEC BUT, Brno, Czechia
    Michaela RAVASOVÁ, Central European Institute of Technology, CEITEC BUT, Brno, Czechia
    ElišKa VIRÁGOVÁ, Central European Institute of Technology, CEITEC BUT, Brno, Czechia
    Pavlína ŠÁRFY, Central European Institute of Technology, CEITEC BUT, Brno, Czechia

    person_pinPremysl ŠTASTNÝ, Central European Institute of Technology, CEITEC BUT, Brno, Czechia
    K17:00 - 17:30 | The progressive development of Environmental barrier on SiC/SiC composites for high working temperaturesFrancis REBILLAT, Bordeaux University-Laboratoire des Composites Thermostructuraux (LCTS), Pessac, France

    person_pinFrancis REBILLAT, Bordeaux University-Laboratoire des Composites Thermostructuraux (LCTS), Pessac, France
    17:30 - 17:45 | Fracture mechanisms of CMC/EBC system under thermo-mechanical loadingsInes HAMADOUCHE, ONERA, Université Paris-Saclay, Châtillon, France
    Thibaut ARCHER, ONERA, Université Paris-Saclay, Châtillon, France
    Pierre BEAUCHÊNE, ONERA, Université Paris-Saclay, Châtillon, France
    Thomas VANDELLOS, SAFRAN Ceramics, a technology platform of Safran Tech, Le Haillan, France
    François HILD, Université Paris-Saclay, CentraleSupélec, ENS Paris-Saclay, CNRS, LMPS–Laboratoire de Mécanique Paris-Saclay, Gif-Sur-Yvette, France

    person_pinInes HAMADOUCHE, ONERA, Université Paris-Saclay, Châtillon, France
    17:45 - 18:00 | Fabrication of functionally multilayered ytterbium silicate EBCs using slurry spraying - reactive sintering technique.?Gauri WAGHMARE, Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology, Bombay, Mumbai, India
    Vikram HASTAK, Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology, Bombay, Mumbai, India
    Ashutosh Suresh GANDHI, Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology, Bombay, Mumbai, India

    person_pinGauri WAGHMARE, Department of Metallurgical Engineering and Materials Science, Indian Institute of Technology, Bombay, Mumbai, India
    18:00 - 18:15 | Degradations by molten sands of silicate-based Environmental barrier at 1400°C for protection of SiC/SiC compositesThibaut MOURET, Bordeaux University-Laboratoire des Composites Thermostructuraux (LCTS), Pessac, France
    Laurence MAILLE, Bordeaux University-Laboratoire des Composites Thermostructuraux (LCTS), Pessac, France
    Francis REBILLAT, Bordeaux University-Laboratoire des Composites Thermostructuraux (LCTS), Pessac, France

    person_pinFrancis REBILLAT, Bordeaux University-Laboratoire des Composites Thermostructuraux (LCTS), Pessac, France
    18:15 - 18:30 | Steam oxidation of an yttrium disilicate environmental barrier coating (EBC) depending on various corrosive environment : kineticsLallie QUEMERAS, Thermostructural Composites Laboratory, LCTS, UMR 5801, Université de Bordeaux, Pessac, France
    Guillaume COUEGNAT, Thermostructural Composites Laboratory, LCTS, UMR 5801, Université de Bordeaux, Pessac, France
    Thomas VANDELLOS, Safran Ceramics, Le Haillan, France
    Francis REBILLAT, Thermostructural Composites Laboratory, LCTS, UMR 5801, Université de Bordeaux, Pessac, France

    person_pinLallie QUEMERAS, Thermostructural Composites Laboratory, LCTS, UMR 5801, Université de Bordeaux, Pessac, France
    18:30 - 18:45 | High Temperature interfacial interactions in CMCs/HEAs (AlCoCrFeNi) systems  Fabrizio VALENZA, CNR-ICMATE National Research Council - Institute of Condensed Matter Chemistry and Technologies for Energy, Genova, Italy
    Sofia GAMBARO, CNR-ICMATE National Research Council - Institute of Condensed Matter Chemistry and Technologies for Energy, Genova, Italy
    Lorenzo FENOCCHIO, UNIGE-DCCI University of Genova, Chemistry and Industrial Chemistry Department, Genova, Italy
    Gabriele CACCIAMANI,

    person_pinFabrizio VALENZA, CNR-ICMATE National Research Council - Institute of Condensed Matter Chemistry and Technologies for Energy, Genova, Italy
    17:00 - 17:15 | High transparent MgAl2O4 ceramics by Spark Plasma Sintering (SPS)Ameni HAWEL,
    Hugo SPIRIDIGLIOZZI, Université Sorbonne Paris Nord, Villetaneuse, France
    Virgile TRANNOY, Université Sorbonne Paris Nord, Villetaneuse, France
    Benjamin VILLEROY, ICMPE - Institut de Chimie et des Matériaux Paris-Est, Thiais, France
    Andrei KANAEV, Université Sorbonne Paris Nord, Villetaneuse, France
    Frederic SCHOENSTEIN, Université Sorbonne Paris Nord, Villetaneuse, France

    person_pinAmeni HAWEL, Université Sorbonne Paris Nord, Villetaneuse, France; ICMPE - Institut de Chimie et des Matériaux Paris-Est, Thiais, France
    17:15 - 17:30 | Crystallization of MgO-Y2O3 composite nanopowders monitored by in-situ high temperature X-ray diffractionMaria TSOUTSOUVA, DMAS, ONERA, Université Paris Saclay , F-92322 Châtillon, France
    Nathan BRARD,
    Frédéric FOSSARD, LEM, UMR 104 CNRS-ONERA, Université Paris Saclay, F-92322, Châtillon, France
    Nicolas EMERY, ICMPE, CNRS, UMR 7182, 2 Rue Henri Dunant, 94320 Thiais, France
    Stéphane BACH,
    Johan PETIT, DMAS, ONERA, Université Paris Saclay , F-92322 Châtillon, France

    person_pinMaria TSOUTSOUVA, DMAS, ONERA, Université Paris Saclay , F-92322 Châtillon, France
    17:30 - 17:45 | Development of Higher Purity Aluminas for Improved Sintering and Dielectric PerformanceStefan PFEIFFER, Almatis GmbH, Ludwigshafen, Germany
    Tobias FRÜH, Almatis GmbH, Ludwigshafen, Germany
    Nils ROSENBERGER, Almatis GmbH, Ludwigshafen, Germany
    Charles COMPSON, Almatis GmbH, Ludwigshafen, Germany

    person_pinStefan PFEIFFER, Almatis GmbH, Ludwigshafen, Germany
    17:45 - 18:00 | Composite ceramics with eutectic microstructure by controlled crystallization of binary and ternary aluminate glassesAnna PRNOVA, Joint Glass Centre of the IIC SAS, TnUAD, and FChPT STU, Trencin, Slovakia
    Jana VALUCHOVA, Joint Glass Centre of the IIC SAS, TnUAD, and FChPT STU, Trencin, Slovakia
    Maryam VAKSHOURI, Centre for functional and surface-functionalized glass, Trencin, Slovakia
    Dusan GALUSEK,

    person_pinDusan GALUSEK, Centre for functional and surface-functionalized glass, Trencin, Slovakia; Joint Glass Centre of the IIC SAS, TnUAD, and FChPT STU, Trencin, Slovakia
    18:00 - 18:15 | Sintering of the mixed α-alumina/kaolinite system. Application to the co-pressing of multilayer materialsRana AL TAHAN, Université de Limoges, Limoges, France
    Cécile PAGNOUX, Université de Limoges, Limoges, France
    Nicolas TESSIER-DOYEN, Université de Limoges, Limoges, France
    Gilles GASGNIER, Imerys Tableware France, Limoges, France

    person_pinRana AL TAHAN, Université de Limoges, Limoges, France
    18:15 - 18:30 | Changes in mesoscale mechanical properties of glass and ceramic surfaces due to chemical reactionsJunichi TATAMI, Yokohama National University, Yokohama, Japan
    Motoyuki IIJIMA, Yokohama National University, Yokohama, Japan
    Takumi TAKAHASHI, Kanagawa Institute of Industrial Science and Technology, Ebina, Japan
    Tsukaho YAHAGI,
    Tatsuki OHJI,
    Hiromi NAKANO, Toyohashi University of Technology, Toyohashi, Japan

    person_pinJunichi TATAMI, Yokohama National University, Yokohama, Japan
    18:30 - 18:45 | Mechanical characterization of Ni-YSZ fuel electrode for Solid Oxide CellsSandra GARCÍA GONZÁLEZ,
    Emilio JIMÉNEZ PIQUÉ,
    Dario MONTINARO, SolydEra SpA, Mezzolombardo, Italy
    Miguel MORALES COMAS,

    person_pinSandra GARCÍA GONZÁLEZ, CIEFMA, Department of Materials Science and Engineering, EEBE, Universitat Politècnica de Catalunya (UPC), Barcelona, Spain; Barcelona Research Center in Multiscale Science and Engineering, Universitat Politècnica de Catalunya (UPC), Barcelona, Spain
    18:45 - 19:00 | A study on the Reticulated Porous Ceramics for Environmental and Military applicationsJang-Hoon HA, Korea Institute of Materials Science, Changwon, Korea (Republic of)
    Hong-Joo LEE, Korea Institute of Materials Science, Changwon, Korea (Republic of)
    Jongman LEE, Korea Institute of Materials Science, Changwon, Korea (Republic of)
    In-Hyuck SONG, Korea Institute of Materials Science, Changwon, Korea (Republic of)

    person_pinJang-Hoon HA, Korea Institute of Materials Science, Changwon, Korea (Republic of)
    HL17:00 - 17:30 | Hafnia-based materials for aerospace applicationsAurélie JULIAN-JANKOWIAK, ONERA/DMAS-Université de Paris-Saclay, Châtillon, France
    Lisa AUDOUARD, ONERA/DMAS-Université de Paris-Saclay, Châtillon, France
    Louise SÉVIN, ONERA/DMAS-Université de Paris-Saclay, Châtillon, France
    Jean-François JUSTIN, ONERA/DMAS-Université de Paris-Saclay, Châtillon, France
    Pierre BERTRAND, Université de Bourgogne Franche-Comté, laboratoire ICB UMR CNRS-UB-UTBM 6303, Belfort , France
    Cécile LANGLADE, Université de Bourgogne Franche-Comté, laboratoire ICB UMR CNRS-UB-UTBM 6303, Belfort , France
    Fabrice MAUVY, ICMCB, Université de Bordeaux, Pessac, France
    Matthieu GARCIA, Direction des systèmes orbitaux, CNES, Toulouse, France

    person_pinAurélie JULIAN-JANKOWIAK, ONERA/DMAS-Université de Paris-Saclay, Châtillon, France
    17:30 - 17:45 | Ablation Resistance of Ultra-High Temperature Polymer-Derived Ceramic-Matrix CompositeElia ZANCAN, University of Birmingham, Birmingham, United Kingdom

    person_pinElia ZANCAN, University of Birmingham, Birmingham, United Kingdom
    17:45 - 18:00 | A reusable material for atmospheric reentries: fabrication and characterizationsLaurence MAILLÉ, Université de Bordeaux / Laboratoire des Composites ThermoStructuraux , PESSAC, France
    Caroline LIÉGAUT,
    Pierre BERTRAND, Université de Bourgogne Franche Comté, Laboratoire Interdisciplinaire Carnot de Bourgogne, Sévenans, France
    Francis REBILLAT, Université de Bordeaux / Laboratoire des Composites ThermoStructuraux , PESSAC, France

    person_pinLaurence MAILLÉ, Université de Bordeaux / Laboratoire des Composites ThermoStructuraux , PESSAC, France
    18:00 - 18:15 | Self-healing Behavior of Sc2Si2O7 with SiC Nanocomposite for Environmental Barrier CoatingsJang BYUNG-KOOG, Kyushu University, Fukuoka, Japan
    Kim SEUNG-HYEON, Kyushu University, Fukuoka, Japan

    person_pinJang BYUNG-KOOG, Kyushu University, Fukuoka, Japan
    18:15 - 18:30 | Single and multi-component REDS systems for TEBC application: Synthesis and study of high temperature interaction with CMASCynthia Yanel GUIJOSA GARCIA, German Aerospace Center, DLR, Cologne, Germany
    Peter MECHNICH, German Aerospace Center, DLR, Cologne, Germany
    Uwe SCHULZ, German Aerospace Center, DLR, Cologne, Germany
    Ravisankar NARAPARAJU, German Aerospace Center, DLR, Cologne, Germany

    person_pinCynthia Yanel GUIJOSA GARCIA, German Aerospace Center, DLR, Cologne, Germany
    18:30 - 18:45 | Oxide Semiconductor Sensors for Monitoring Advanced Energy Conversion and Manufacturing Processes at High TemperatureJavier MENA, West Virginia University, Morgantown, United States
    Katarzyna SABOLSKY, West Virginia University, Morgantown, United States
    Nicholas WINCH, West Virginia University, Morgantown, United States
    Rowan BARTO, West Virginia University, Morgantown, United States
    Nicholas VOORSTAD, West Virginia University, Morgantown, United States
    Konstantinos SIERROS, West Virginia University, Morgantown, United States
    Edward SABOLSKY, West Virginia University, Morgantown, United States

    person_pinEdward SABOLSKY, West Virginia University, Morgantown, United States
    18:45 - 19:00 | Reactive spark plasma sintering of ZrB2 tribo-ceramics from high-energy ball-milled ZrH2+2BJesús LÓPEZ-ARENAL, Departamento de Física de la Materia Condensada, Universidad de Sevilla, Seville, Spain
    Bibi Malmal MOSHTAGHIOUN, Departamento de Física de la Materia Condensada, Universidad de Sevilla, Seville, Spain
    Diego GÓMEZ-GARCÍA, Departamento de Física de la Materia Condensada, Universidad de Sevilla, Seville, Spain
    Ángel Luis ORTIZ, Departamento de Ingeniería Mecánica, Energética y de Los Materiales, Universidad de Extremadura, Badajoz, Spain

    person_pinJesús LÓPEZ-ARENAL, Departamento de Física de la Materia Condensada, Universidad de Sevilla, Seville, Spain
    17:00 - 17:15 | Tuning the properties of the magnetoelectric cobalt ferrite – a promising candidate for wireless neurostimulationAleksandra MILOJKOVIC, Technical University Munich, Munich, Germany
    Kristen KOZIELSKI, Technical University Munich, Munich, Germany
    Fabian KOHLER, Technical University Munich, Munich, Germany

    person_pinAleksandra MILOJKOVIC, Technical University Munich, Munich, Germany
    17:15 - 17:30 | Ceramic coatings for polymeric filtration membranesPiotr WIECINSKI, Warsaw University of Technology, Warsaw, Poland
    Halina GARBACZ, Warsaw University of Technology, Warsaw, Poland
    Joanna KACPRZYNSKA-GOLACKA, Lukasiewicz Research Network – Institute for Sustainable Technologies, Radom, Poland
    Jerzy SMOLIK, Lukasiewicz Research Network – Institute for Sustainable Technologies, Radom, Poland

    person_pinPiotr WIECINSKI, Warsaw University of Technology, Warsaw, Poland
    17:30 - 17:45 | Plasmonic Sensor exploiting Silica-Gold Nanoparticles embedded into a Mesoporous Silica Topcoat  Romain TRIHAN, IRCER – Institute of Research for Ceramics, Limoges, France
    Anne AIMABLE, IRCER – Institute of Research for Ceramics, Limoges, France
    Fabrice ROSSIGNOL, IRCER – Institute of Research for Ceramics, Limoges, France
    Oskar BOGUCKI, Łukasiewicz IMIF – Institute for Microelectronics and Photonics , Warsaw, Poland
    Anna KOZLOWSKA, Łukasiewicz IMIF – Institute for Microelectronics and Photonics , Warsaw, Poland
    Martin IHLE, Fraunhofer IKTS – Institute for Ceramic Technologies and Systems , Dresden, Germany
    Steffen ZIESCHE, Fraunhofer IKTS – Institute for Ceramic Technologies and Systems , Dresden, Germany
    Bartosz FETLINSKI, WUT – Warsaw University of Technology , Warsaw, Poland
    Bartosz JANASZEK, WUT – Warsaw University of Technology , Warsaw, Poland
    Marcin KIELISZCZYK, WUT – Warsaw University of Technology , Warsaw, Poland
    Marcin KACZKAN, WUT – Warsaw University of Technology , Warsaw, Poland
    Piotr GIEMZA, Teknosystem Co. Ltd, Warsaw, Poland
    Marcin SZCZYPA, Teknosystem Co. Ltd, Warsaw, Poland

    person_pinRomain TRIHAN, IRCER – Institute of Research for Ceramics, Limoges, France
    17:45 - 18:00 | Piezo-phototronic Ultraviolet Photodetectors based on ZnO bicrystal interfacesAhmad SAYYADISHAHRAKI, Technical University of Darmstadt, Darmstadt, Germany
    Jürgen RÖDEL, Technical University of Darmstadt, Darmstadt, Germany
    Till FRÖMLING, Technical University of Darmstadt, Darmstadt, Germany

    person_pinAhmad SAYYADISHAHRAKI, Technical University of Darmstadt, Darmstadt, Germany
    HL17:00 - 17:30 | Methods for improving the properties of piezoelectric all-ceramic composites using low energy consumption manufacturing processesMikko NELO, Microelectronics Research Unit, Faculty of Information Technology and Electrical Engineering, University of Oulu, FINLANDE
    Yang BAI, Microelectronics Research Unit, Faculty of Information Technology and Electrical Engineering, University of Oulu, FINLANDE
    Siponkoski TUOMO, Microelectronics Research Unit, Faculty of Information Technology and Electrical Engineering, University of Oulu, FINLANDE
    Jari JUUTI, Microelectronics Research Unit, Faculty of Information Technology and Electrical Engineering, University of Oulu, FINLANDE
    Heli JANTUNEN, Microelectronics Research Unit, Faculty of Information Technology and Electrical Engineering, University of Oulu, FINLANDE

    person_pinHeli JANTUNEN, Microelectronics Research Unit, Faculty of Information Technology and Electrical Engineering, University of Oulu, FINLANDE
    17:30 - 17:45 | Synthesis and integration into miniature dielectric resonator antennas of low-loss dielectric strontium tantalate ceramics  Matthew JULIAN, Univ Rennes, CNRS, Institut d'Electronique et des Technologies du numéRique (IETR-UMR 6164), Saint Brieuc, France
    Laurent LE GENDRE, Univ Rennes, CNRS, Institut d'Electronique et des Technologies du numéRique (IETR-UMR 6164), Saint Brieuc, France
    Ratiba BENZERGA, Univ Rennes, CNRS, Institut d'Electronique et des Technologies du numéRique (IETR-UMR 6164), Saint Brieuc, France
    Mohamad HAYDOURA, Univ Rennes, CNRS, Institut d'Electronique et des Technologies du numéRique (IETR-UMR 6164), Saint Brieuc, France
    Ala SHARAIHA, Univ Rennes, CNRS, Institut d'Electronique et des Technologies du numéRique (IETR-UMR 6164), Saint Brieuc, France
    Francois CHEVIRE, Univ Rennes, CNRS, Institut des Sciences Chimiques de Rennes (ISCR-UMR 6226), Rennes, France
    Claire LE PAVEN, Univ Rennes, CNRS, Institut d'Electronique et des Technologies du numéRique (IETR-UMR 6164), Saint Brieuc, France

    person_pinLaurent LE GENDRE, Univ Rennes, CNRS, Institut d'Electronique et des Technologies du numéRique (IETR-UMR 6164), Saint Brieuc, France
    17:45 - 18:00 | SiC based ceramic packages for detectors manufactured by additive manufacturingZuzana KOVACOVA, RHP-Technology GmbH, Seibersdorf, Austria
    Christopher WALLIS, RHP-Technology GmbH, Seibersdorf, Austria
    Estefania ROCIO, FACT Industries, Tallinn, Estonia
    Asier LORES, TECNALIA, Donostia-San Sebastian, Spain
    Marina AGHAYAN, FACT Industries, Tallinn, Estonia
    Inigo AGOTE, TECNALIA, Donostia-San Sebastian, Spain
    Charlotte BRINGER, European Space Agency, Noordwijk, Netherlands
    Joerg TER HAAR, European Space Agency, Noordwijk, Netherlands
    Wladimir MUFFATO, EGIDE, Bollene Cedex, France
    Michael KITZMANTEL, RHP-Technology GmbH, Seibersdorf, Austria
    Erich NEUBAUER, RHP-Technology GmbH, Seibersdorf, Austria

    person_pinZuzana KOVACOVA, RHP-Technology GmbH, Seibersdorf, Austria
    18:00 - 18:15 | Finite element modeling of porous BaTiO3 ceramics by using experimentally-determined 3D microstructuresRadu Stefan STIRBU, Alexandru Ioan Cuza University, Iasi, Romania
    Leontin PADURARIU, Alexandru Ioan Cuza University, Iasi, Romania
    Vlad Alexandru LUKACS, Alexandru Ioan Cuza University, Iasi, Romania
    Fereshteh Falah CHAMASEMANI, Department Materials Center, Leoben Forschung GmbH, Leoben A-8700, Austria, Leoben, Austria
    Roland BRUNNER, Department Materials Center, Leoben Forschung GmbH, Leoben A-8700, Austria, Leoben, Austria
    Liliana MITOSERIU, Alexandru Ioan Cuza University, Iasi, Romania

    person_pinRadu Stefan STIRBU, Alexandru Ioan Cuza University, Iasi, Romania
    18:15 - 18:30 | Influence of pore shape on the dielectric properties of BaTiO3 ceramicsGiovanna CANU, CNR-ICMATE, Institute of Condensed Matter Chemistry and Technology for Energy, Genoa, Italy
    Vincenzo BUSCAGLIA, CNR-ICMATE, Institute of Condensed Matter Chemistry and Technology for Energy, Genoa, Italy
    Roland BRUNNER, Materials Center Leoben Forschung GmbH, Leoben, Austria
    Philipp Aldo WIESER, Materials Center Leoben Forschung GmbH, Leoben, Austria
    Maria Teresa BUSCAGLIA, CNR-ICMATE, Institute of Condensed Matter Chemistry and Technology for Energy, Genoa, Italy
    Marco DELUCA, Materials Center Leoben Forschung GmbH, Leoben, Austria

    person_pinGiovanna CANU, CNR-ICMATE, Institute of Condensed Matter Chemistry and Technology for Energy, Genoa, Italy
    HL18:30 - 19:00 | Functionally Graded Piezoelectric Composites for Biological ApplicationsVlad JARKOV, Department of Mechanical Engineering, University of Bath, Bath, UNITED KINGDOM
    Chris ADAMS, Department of Neuroscience, School of Life Sciences, Keele University,, Staffordshire, UNITED KINGDOM
    Hamideh KHANBAREH, Department of Mechanical Engineering, University of Bath, Bath, UNITED KINGDOM

    person_pinHamideh KHANBAREH, Department of Mechanical Engineering, University of Bath, Bath, UNITED KINGDOM
    HL17:00 - 17:30 | Long term stability of BCZY-GDC hydrogen separation membranesElisa MERCADELLI, CNR-ISSMC (ex ISTEC), Faenza, Italy
    Angela GONDOLINI, CNR-ISSMC (ex ISTEC), Faenza, Italy
    Matteo ARDIT, Department of Physics and Earth Sciences, University of Ferrara, Ferrara, Italy
    Giuseppe CRUCIANI, Department of Physics and Earth Sciences, University of Ferrara, Ferrara, Italy
    Cesare MELANDRI, CNR-ISSMC (ex ISTEC), Faenza, Italy
    Sonia ESCOLÁSTICO, Instituto de Tecnología Química (Universitat Politècnica de València-Consejo Superior de Investigaciones Cientifícas), Valencia, Spain
    José SERRA, Instituto de Tecnología Química (Universitat Politècnica de València-Consejo Superior de Investigaciones Cientifícas), Valencia, Spain
    Alessandra SANSON, CNR-ISSMC (ex ISTEC), Faenza, Italy

    person_pinElisa MERCADELLI, CNR-ISSMC (ex ISTEC), Faenza, Italy
    17:30 - 17:45 | Synthesis and performance of SrTi0.75Fe0.25O3-δ (STF25) oxygen transport membranes  Wendelin DEIBERT, Forschungszentrum Jülich GmbH, Jülich, Germany
    Patrick BEHR, Forschungszentrum Jülich GmbH, Jülich, Germany
    Stefan BAUMANN, Forschungszentrum Jülich GmbH, Jülich, Germany
    Wilhelm A. MEULENBERG,

    person_pinWendelin DEIBERT, Forschungszentrum Jülich GmbH, Jülich, Germany
    17:45 - 18:00 | Performance of asymmetric oxygen transport membranes: guidance from modelingKai WILKNER,
    Robert MÜCKE,
    Stefan BAUMANN,
    Wilhelm Albert MEULENBERG,
    Olivier GUILLON,

    person_pinKai WILKNER, Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research, IEK-1: Materials Synthesis and Processing, Jülich, Germany; Jülich Aachen Research Alliance: JARA-Energy, Aachen, Germany; RWTH Aachen University, Institute of Mineral Engineering Department of Ceramics and Refractory Materials, Aachen, Germany
    18:00 - 18:15 | Effect of molybdenum concentration in SrFe1-xMoxO3-δ on the kinetics of CO2 reduction reactionAhmad SHAUR, University of Twente, Enschede, Netherlands
    Bernard BOUKAMP, University of Twente, Enschede, Netherlands
    Henny J.M. BOUWMEESTER, University of Twente, Enschede, Netherlands

    person_pinAhmad SHAUR, University of Twente, Enschede, Netherlands
    18:15 - 18:30 | Direct electrocatalytic CO2 reduction in a tubular protonic membrane reactor at high pressureImanol QUINA, Instituto de Tecnología Química (Universitat Politècnica de València—Consejo Superior de Investigaciones Científicas), Valencia, Spain
    Laura ALMAR, Instituto de Tecnología Química (Universitat Politècnica de València—Consejo Superior de Investigaciones Científicas), Valencia, Spain
    David CATALÁN, Instituto de Tecnología Química (Universitat Politècnica de València—Consejo Superior de Investigaciones Científicas), Valencia, Spain
    Amir Masoud DAYAGHI, Department of Chemistry, Centre for Materials Science and Nanotechnology, University of Oslo, Oslo, Norway
    Camilla VIGEN, CoorsTek Membrane Sciences AS, Oslo, Norway
    Truls NORBY, Department of Chemistry, Centre for Materials Science and Nanotechnology, University of Oslo, Oslo, Norway
    Jose Manuel SERRA, Instituto de Tecnología Química (Universitat Politècnica de València—Consejo Superior de Investigaciones Científicas), Valencia, Spain
    Sonia ESCOLÁSTICO, Instituto de Tecnología Química (Universitat Politècnica de València—Consejo Superior de Investigaciones Científicas), Valencia, Spain

    person_pinImanol QUINA, Instituto de Tecnología Química (Universitat Politècnica de València—Consejo Superior de Investigaciones Científicas), Valencia, Spain
    18:30 - 18:45 | MOFs functionalization of 3D printed mullite complex architectures for CO2 captureArianna BERTERO, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
    Bartolomeo COPPOLA, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
    Julien SCHMITT,
    Helena KAPER, Saint-Gobain CREE, Saint-Gobain Research Provence, Cavaillon, France
    Paola PALMERO, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
    Jean-Marc TULLIANI, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy

    person_pinArianna BERTERO, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
    18:45 - 19:00 | Ceramic membrane reactors for the electrocatalytic conversion of CO2 into chemical energy carriersElena STEFAN, SINTEF Industry, Sustainable Energy Technology, Oslo, Norway
    Marie-Laure FONTAINE, SINTEF Industry, Sustainable Energy Technology, Oslo, Norway
    Amir Masoud DAYAGHI, Department of Chemistry, Centre for Materials Science and Nanotechnology (SMN), University of Oslo, Oslo, Norway
    Camilla VIGEN, CoorsTek Membrane Sciences AS, Oslo, Norway
    Einar VØLLESTAD, SINTEF Industry, Sustainable Energy Technology, Oslo, Norway
    Laura ALMAR, Instituto de Tecnología Química (Universitat Politècnica de València—Consejo Superior de Investigaciones Científicas), Valencia, Spain
    Imanol QUINA, Instituto de Tecnología Química (Universitat Politècnica de València—Consejo Superior de Investigaciones Científicas), Valencia, Spain
    Sonia ESCOLÁSTICO, Instituto de Tecnología Química (Universitat Politècnica de València—Consejo Superior de Investigaciones Científicas), Valencia, Spain
    Kwati LEONARD, International Institute for Carbon Neutral Energy Research (WPI-I2CNER), Kyushu University, Fukuoka, Japan
    Hiroshige MATSUMOTO, International Institute for Carbon Neutral Energy Research (WPI-I2CNER), Kyushu University, Fukuoka, Japan
    Jose M. SERRA, Instituto de Tecnología Química (Universitat Politècnica de València—Consejo Superior de Investigaciones Científicas), Valencia, Spain

    person_pinElena STEFAN, SINTEF Industry, Sustainable Energy Technology, Oslo, Norway
    HL17:00 - 17:30 | Laser-ablation modifications of ceramic and metallic components of solid oxide cellsSebastian MOLIN, Gdańsk University of Technology, Gdańsk, Poland
    Mohamed Ahmed BABA, Kaunas University of Technology, Kaunal, Lithuania
    Tomas TAMULEVI?IUS, Kaunas University of Technology, Kaunal, Lithuania
    Bartlomiej LEMIESZEK, Gdańsk University of Technology, Gdańsk, Poland
    Piotr JASINSKI, Gdańsk University of Technology, Gdańsk, Poland

    person_pinSebastian MOLIN, Gdańsk University of Technology, Gdańsk, Poland
    17:30 - 17:45 | Robust Fabrication of Metal Supported Solid Oxide Cells via Tape CastingFederico CAPOTONDO, Danmark Tekniske Universitet, Kongens Lyngby, Denmark
    Bhaskar SUDIREDDY, Danmark Tekniske Universitet, Kongens Lyngby, Denmark
    Anke HAGEN, Danmark Tekniske Universitet, Kongens Lyngby, Denmark

    person_pinFederico CAPOTONDO, Danmark Tekniske Universitet, Kongens Lyngby, Denmark
    17:45 - 18:00 | Improved performance of Sr(Fe,Co,Sb)O3 air electrode by optimised spray-pyrolysis synthesis and depositionVíctor ZAPATA-RAMÍREZ,
    Glenn C. MATHER, Instituto de Cerámica y Vidrio. Consejo Superior de Investigaciones Científicas, Madrid, Spain
    Domingo PÉREZ-COLL, Instituto de Cerámica y Vidrio. Consejo Superior de Investigaciones Científicas, Madrid, Spain

    person_pinDomingo PÉREZ-COLL, Instituto de Cerámica y Vidrio. Consejo Superior de Investigaciones Científicas, Madrid, Spain
    18:00 - 18:15 | Effective recovery strategies for critical and hazardous materials from end-of-life solid oxide cellsSofia SAFFIRIO, Politecnico di Torino - Department of Applied Science and Technology, Turin, Italy
    Silvia FIORE, Politecnico di Torino - Department of Environment, Land, and Infrastructure Engineering, Turin, Italy
    Massimo SANTARELLI, Politecnico di Torino - Department of Energy, Turin, Italy
    Ilaria SCHIAVI, Environment Park S.p.A., Turin, Italy
    Sergii PYLYPKO, Elcogen AS, Tallin, Estonia
    Rok STROPNIK, University of Ljubljana, Ljubljana, Slovenia
    Mitja MORI, University of Ljubljana, Ljubljana, Slovenia
    Andrej LOTRIC, University of Ljubljana, Ljubljana, Slovenia
    Federico SMEACETTO, Politecnico di Torino - Department of Applied Science and Technology, Turin, Italy
    Sonia FIORILLI, Politecnico di Torino - Department of Applied Science and Technology, Turin, Italy

    person_pinSofia SAFFIRIO, Politecnico di Torino - Department of Applied Science and Technology, Turin, Italy
    18:15 - 18:30 | Effects of Laser Machining on NiO-YSZ surface for Solid Oxide Fuel CellsMiguel MORALES,
    Sandra GARCÍA,
    Michaela PLCH,
    Dario MONTINARO, SolydEra, Mezzolombardo, Italy
    Emilio JIMÉNEZ-PIQUÉ,

    person_pinMiguel MORALES, CIEFMA, Department of Materials Science and Engineering, EEBE, Universitat Politècnica de Catalunya (UPC), Barcelona, Spain; Barcelona Research Center in Multiscale Science and Engineering, Universitat Politècnica de Catalunya (UPC), Barcelona, Spain
    18:30 - 18:45 | Preparation and properties of gadolinium-doped ceria made from different production routesPaul PETSCHNIG, Imerys, Villach, Austria
    Teresa REY WOJCIK, Imerys, Villach, Austria
    Joanna SZYMANSKA, Imerys, Villach, Austria
    Adrian VILLALBA WEINBERG, Imerys, Villach, Austria
    Michele PAVONE, Imerys, Villach, Austria
    Bruno KORNER, Imerys, Villach, Austria
    Daniela JOSCHAK ARRICH, Imerys, Villach, Austria
    Veronika MUELLER, Imerys, Villach, Austria
    Sarah GRIESSER, Imerys, Villach, Austria
    Andreas BOERGER, Imerys, Villach, Austria
    Angelika PRIESE, Imerys, Laufenburg, Germany

    person_pinPaul PETSCHNIG, Imerys, Villach, Austria
    18:45 - 19:00 | Development of tubular proton ceramic electrolysis cells for pressurized operationMarie-Laure FONTAINE , SINTEF AS , Oslo , Norway
    Elena STEFAN, SINTEF AS , Oslo , Norway
    Christelle DENONVILLE, SINTEF AS , Oslo , Norway
    Einar VOLLESTAD, SINTEF AS , Oslo , Norway

    person_pinMarie-Laure FONTAINE , SINTEF AS , Oslo , Norway
    HL17:00 - 17:30 | Cultural Heritage analysis using Synchrotron Radiation: case studies in Ceramics, Glasses, and Lithologic MaterialsJ. P VEIGA,
    M. L COUTINHO,
    E. FIGUEIREDO,
    T. P SILVA, LNEG — Laboratório Nacional de Energia e Geologia, I.P., Unidade de Recursos Minerais e Geofísica

    person_pinJ. P VEIGA, Centro de Investigação de Materiais, FCT NOVA, Portugal; Department of Conservation and Restoration, FCT NOVA, portugal; Vidro e Cerâmica para as Artes (VICARTE), Faculdade de Ciências e Tecnologia, Universidade Nova de Lisboa, Portugal
    17:30 - 17:45 | Performance comparison of sol-gel coatings and an innovative plasma treatment for ancient glass protectionStefano CENTENARO,
    Giulia FRANCESCHIN, Center for Cultural Heritage Technology (CCHT), Istituto Italiano di Tecnologia (IIT), via Torino 155, 30170, Venezia Mestre, Italy
    Elti CATTARUZZA, Dipartimento di Scienze Molecolari e Nanosistemi (DSMN), Università Ca' Foscari Venezia, via Torino 155, 30170, Venezia Mestre, Italy
    Arianna TRAVIGLIA, Center for Cultural Heritage Technology (CCHT), Istituto Italiano di Tecnologia (IIT), via Torino 155, 30170, Venezia Mestre, Italy

    person_pinStefano CENTENARO, Dipartimento di Scienze Molecolari e Nanosistemi (DSMN), Università Ca' Foscari Venezia, via Torino 155, 30170, Venezia Mestre, Italy; Center for Cultural Heritage Technology (CCHT), Istituto Italiano di Tecnologia (IIT), via Torino 155, 30170, Venezia Mestre, Italy
    17:45 - 18:00 | Effect of rinsing and zinc salt spraying treatment to protect unstable ancient glasses against a humid atmosphere Thalie LAW, PCMTH, PSL University, Chimie Paristech, CNRS, Institut de Recherche de Chimie Paris, Centre de Recherche et de Restauration des Musées de France, Paris, France, Paris, France
    Anna PICCOLO, PCMTH, PSL University, Chimie Paristech, CNRS, Institut de Recherche de Chimie Paris, Centre de Recherche et de Restauration des Musées de France, Paris, France, Paris, France
    Odile MAJÉRUS, PCMTH, PSL University, Chimie Paristech, CNRS, Institut de Recherche de Chimie Paris, Centre de Recherche et de Restauration des Musées de France, Paris, France, Paris, France
    Daniel CAURANT, PCMTH, PSL University, Chimie Paristech, CNRS, Institut de Recherche de Chimie Paris, Centre de Recherche et de Restauration des Musées de France, Paris, France, Paris, France
    Marie GODET, PCMTH, PSL University, Chimie Paristech, CNRS, Institut de Recherche de Chimie Paris, Centre de Recherche et de Restauration des Musées de France, Paris, France, Paris, France
    Antoine SEYEUX, PCS, PSL University, Chimie Paristech, CNRS, Institut de Recherche de Chimie Paris, Paris, France, Paris, France
    Thibault CHARPENTIER, Université Paris-Saclay, CEA, CNRS, NIMBE, 91191 Gif-sur-Yvette cedex, France, Saclay, France

    person_pinThalie LAW, PCMTH, PSL University, Chimie Paristech, CNRS, Institut de Recherche de Chimie Paris, Centre de Recherche et de Restauration des Musées de France, Paris, France, Paris, France
    18:00 - 18:15 | Glassy sol-gel chemical sensors applied for monitoring museums environmentsJavier DÍAZ, Instituto de Historia, CSIC. Calle Albasanz, 26-28. 28037 Madrid (Spain), MADRID, Spain
    Ana M. VILLA-MANSO, Instituto de Historia, CSIC. Calle Albasanz, 26-28. 28037 Madrid (Spain), MADRID, Spain
    Fernando AGUA, Instituto de Historia, CSIC. Calle Albasanz, 26-28. 28037 Madrid (Spain), MADRID, Spain
    Manuel GARCÍA-HERAS, Instituto de Historia, CSIC. Calle Albasanz, 26-28. 28037 Madrid (Spain), MADRID, Spain
    María Ángeles VILLEGAS, Instituto de Historia, CSIC. Calle Albasanz, 26-28. 28037 Madrid (Spain), MADRID, Spain

    person_pinJavier DÍAZ, Instituto de Historia, CSIC. Calle Albasanz, 26-28. 28037 Madrid (Spain), MADRID, Spain
    HL17:00 - 17:30 | The in vitro and hydraulic properties of α-tricalcium phosphate powders are affected by minute amounts of calcium pyrophosphateNicola DÖBELIN, RMS Foundation, Bettlach, Switzerland
    Marc BOHNER, RMS Foundation, Bettlach, Switzerland

    person_pinNicola DÖBELIN, RMS Foundation, Bettlach, Switzerland
    17:30 - 17:45 | Sintered dental inserts based on ion-doped hydroxyapatite as dentin substitutesTamara MATIC, Innovation Center of the Faculty of Technology and Metallurgy Ltd, Belgrade, Serbia
    Maja LEZAJA ZEBIC, University of Belgrade, School of Dental Medicine, Belgrade, Serbia
    Vesna MILETIC, The University of Sydney, Faculty of Medicine and Health, Sydney Dental School, Surry Hills NSW, Australia
    Djordje JANACKOVIC, University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia
    Djordje VELJOVIC, University of Belgrade, Faculty of Technology and Metallurgy, Belgrade, Serbia

    person_pinTamara MATIC, Innovation Center of the Faculty of Technology and Metallurgy Ltd, Belgrade, Serbia
    17:45 - 18:00 | Glass-ceramics with zirconia in silica matrix for dental applicationsWei XIA, Uppsala University, Uppsala, Sweden
    Huasi ZHOU, Uppsala University, Uppsala, Sweden
    Le FU, Central South University, Changsha, China
    Lena KLINTBERG, Uppsala University, Uppsala, Sweden
    Håkan ENGQVIST, Uppsala University, Uppsala, Sweden

    person_pinWei XIA, Uppsala University, Uppsala, Sweden
    18:00 - 18:15 | Effect of abrasives on the protein adsorption and the development of new abrasive media for next generation of ZrO2 restorations  Muhammad Naeem IQBAL, Stockholm University, Dept. Materials and Environmental Chemistry, Stockholm, Sweden
    Mirva ERIKSSON, Stockholm University, Dept. Materials and Environmental Chemistry, Stockholm, Sweden
    Dianne GAN, University of Washington, Department of Restorative Dentistry, School of Dentistry, Seattle, Wash, United States
    Kwok-Hung CHUNG, University of Washington, Department of Restorative Dentistry, School of Dentistry, Seattle, Wash, United States
    Zhijian SHEN, Stockholm University, Dept. Materials and Environmental Chemistry, Stockholm, Sweden

    person_pinMirva ERIKSSON, Stockholm University, Dept. Materials and Environmental Chemistry, Stockholm, Sweden
    18:15 - 18:30 | Surface topographical modification of dental zirconia: influence on cell and bacteria responseNerea GARCIA-DE-ALBENIZ,
    Aisha AMHED, Functional Materials, Saarland University, Saarbrücken, Germany
    Müller DANIEL, Functional Materials, Saarland University, Saarbrücken, Germany
    Mücklich FRANK, Functional Materials, Saarland University, Saarbrücken, Germany
    Jimenez-Piqué EMILIO, Center for Structural Integrity, Reliability and Micromechanics of Materials (CIEFMA), Department of Materials Science and Engineering, Universitat Politècnica de Catalunya, Barcelona, Spain
    Mas-Moruno CARLES, Biomaterials, Biomechanics and Tissue Engineering Group (BBT), Department of Materials Science and Engineering, Universitat Politècnica de Catalunya, Barcelona, Spain

    person_pinNerea GARCIA-DE-ALBENIZ, Center for Structural Integrity, Reliability and Micromechanics of Materials (CIEFMA), Department of Materials Science and Engineering, Universitat Politècnica de Catalunya, Barcelona, Spain; Biomaterials, Biomechanics and Tissue Engineering Group (BBT), Department of Materials Science and Engineering, Universitat Politècnica de Catalunya, Barcelona, Spain
    18:30 - 18:45 | Ion-Exchangeable Nepheline Glass-Ceramics for Dental Application.Ali ALZAHRANI, Department of Basic Oral Medicine and Allied Dental Sciences, College of Dentistry, Taif University., Taif, Saudi Arabia

    person_pinAli ALZAHRANI, Department of Basic Oral Medicine and Allied Dental Sciences, College of Dentistry, Taif University., Taif, Saudi Arabia
    18:45 - 19:00 | Preparation, Microstructures, Mechanical and Biological Properties of High-performance Nano-ZrO2-Al2O3 Composite CeramicsNan LI, Peking University School of Stomatology, Beijing, China
    Jianmin HAN, Peking University School of Stomatology, Beijing, China

    person_pinNan LI, Peking University School of Stomatology, Beijing, China

    calendar_today WED. 05/07

    P08:30 - 12:30 | Plenary Lectures & ECerS Awards Ceremony
    person_pin
    HL14:00 - 14:30 | Nanocellulose – A Versatile Agent for Novel Innovative Ceramic ProcessingAndraž KOCJAN, Jožef Stefan Institute, Ljubljana, Slovenia

    person_pinAndraž KOCJAN, Jožef Stefan Institute, Ljubljana, Slovenia
    14:30 - 14:45 | Influence of the monomer on the sintering of ceramics shaped by gelcastingLaurie GAÜZÈRE,
    Clémence BESNARD, Galtenco Solutions, Talence, France
    Maël PONTOREAU, Univ. Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, Pessac, France
    Samuel COUILLAUD, Galtenco Solutions, Talence, France
    Jean-François LEON, Galtenco Solutions, Talence, France
    Jean-Marc HEINTZ, Univ. Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, Pessac, France

    person_pinJean-Marc HEINTZ, Univ. Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, Pessac, France
    14:45 - 15:00 | Biosynthesis of inorganic ZnS nanoparticlesYann AMAN, Université Félix Houphouët Boigny, Abidjan, Côte d'Ivoire

    person_pinYann AMAN, Université Félix Houphouët Boigny, Abidjan, Côte d'Ivoire
    15:00 - 15:15 | Synthesis of high-purity and defined oxide nanopowders using pulsating spray pyrolysisSabine BEGAND, Fraunhofer IKTS, Hermsdorf, Germany
    Andreas FRICKEL, Fraunhofer IKTS, Hermsdorf, Germany
    Viktor DRESCHER, Glatt Ingenieurtechnik GmbH, Weimar, Germany

    person_pinSabine BEGAND, Fraunhofer IKTS, Hermsdorf, Germany
    15:15 - 15:30 | Pulsed Electrophoretic Deposition of Silica Nanoparticles in Aqueous Medium: a Combined Experimental and Computational StudyAlan ZERROUKI,
    Bruno VUILLEMIN, Laboratoire Interdisciplinaire Carnot de Bourgogne, ICB, FCLAB, UMR6303, CNRS-Université de Bourgogne Franche-Comté, Dijon, France
    Anne-Charlotte FAURE, ITEN Company - Solid-state micro-batteries, Dardilly, France
    Brahim MALKI, Simorg Computing, Grenoble, France
    Frederic BOUYER, Laboratoire Interdisciplinaire Carnot de Bourgogne, ICB, FCLAB, UMR6303, CNRS-Université de Bourgogne Franche-Comté, Dijon, France

    person_pinAlan ZERROUKI, Laboratoire Interdisciplinaire Carnot de Bourgogne, ICB, FCLAB, UMR6303, CNRS-Université de Bourgogne Franche-Comté, Dijon, France; ITEN Company - Solid-state micro-batteries, Dardilly, France
    15:30 - 15:45 | Synthesis of high-entropy oxides through tailored high-entropy precursorsAmy KNORPP, Empa, Duebendorf, Switzerland
    Michael STUER, Empa, Duebendorf, Switzerland

    person_pinAmy KNORPP, Empa, Duebendorf, Switzerland
    15:45 - 16:00 | High-performance Al2O3 multichannel tube-type mesoporous membranes by optimizing the sol-gel method for wastewater treatmentDanyal NASEER,
    Jang-Hoon HA, Korea Institue of Materials Science, Changwon, Korea (Republic of)
    Jongman LEE,
    Hong-Joo LEE, Korea Institue of Materials Science, Changwon, Korea (Republic of)
    In-Hyuck SONG,

    person_pinDanyal NASEER, University of Science and Technology , Daejeon, Korea (Republic of); Korea Institue of Materials Science, Changwon, Korea (Republic of)
    K14:00 - 14:30 | Synergy between chemical reactivity, defect chemistry and unconventional sintering processes towards low temperature densificationCatherine ELISSALDE, University of Bordeaux, CNRS, Bordeaux INP, ICMCB, Pessac, France
    U-Chan CHUNG, University of Bordeaux, CNRS, Bordeaux INP, ICMCB, Pessac, France
    Yoan DENIS, University of Bordeaux, CNRS, Bordeaux INP, ICMCB, Pessac, France
    Etienne MARTIN, University of Bordeaux, CNRS, Bordeaux INP, ICMCB, Pessac, France
    Lucas VILATTE, University of Bordeaux, CNRS, Bordeaux INP, ICMCB, Pessac, France
    Julien DE LANDTSHEER, CIRIMAT, CNRS-INP-UPS, University of Toulouse 3, Toulouse, France
    Thomas HERISSON DE BEAUVOIR, CIRIMAT, CNRS-INP-UPS, University of Toulouse 3, Toulouse, France
    Claude ESTOURNES, CIRIMAT, CNRS-INP-UPS, University of Toulouse 3, Toulouse, France
    Sylvie BORDERE, CNRS, University of Bordeaux, Arts et Métiers Institute of Technology, Bordeaux INP, INRAE, I2M , Talence, France
    Matthew SUCHOMEL, University of Bordeaux, CNRS, Bordeaux INP, ICMCB, Pessac, France
    Mario MAGLIONE, University of Bordeaux, CNRS, Bordeaux INP, ICMCB, Pessac, France
    Gilles PHILIPPOT, University of Bordeaux, CNRS, Bordeaux INP, ICMCB, Pessac, France
    Graziella GOGLIO, University of Bordeaux, CNRS, Bordeaux INP, ICMCB, Pessac, France

    person_pinCatherine ELISSALDE, University of Bordeaux, CNRS, Bordeaux INP, ICMCB, Pessac, France
    14:30 - 14:45 | Advances of cold sintering in ceramic processingYuchi FAN, Donghua University, Shanghai, China
    Jie GAO, Donghua University, Shanghai, China
    Xue-Ping LU, Donghua University, Shanghai, China

    person_pinYuchi FAN, Donghua University, Shanghai, China
    14:45 - 15:00 | Production and properties of potassium-sodium niobate (KNN) ceramics by different advanced sintering techniquesLevent KARACASULU,
    Mattia BIESUZ,
    Vincenzo SGLAVO,
    Cekdar VAKIFAHMETOGLU, Izmir Institute of Technology, Izmir, Turkey

    person_pinLevent KARACASULU, Izmir Institute of Technology, Izmir, Turkey;
    15:00 - 15:15 | Cold sintering process of NASICON solid electrolyte: effect of additives and temperatureMykola VINNICHENKO, Fraunhofer IKTS, Dresden, Germany
    Christoph BAUMGÄRTNER, Fraunhofer IKTS, Dresden, Germany
    Dörte WAGNER, Fraunhofer IKTS, Dresden, Germany
    Alf AURICH, Fraunhofer IKTS, Dresden, Germany
    Yaroslav FEDOROV, Fraunhofer IKTS, Dresden, Germany
    Ansgar LOWACK, Fraunhofer IKTS, Dresden, Germany
    Katja WAETZIG, Fraunhofer IKTS, Dresden, Germany
    Mathias HERRMANN, Fraunhofer IKTS, Dresden, Germany
    Mihails KUSNEZOFF, Fraunhofer IKTS, Dresden, Germany

    person_pinMykola VINNICHENKO, Fraunhofer IKTS, Dresden, Germany
    15:15 - 15:30 | Effect of liquid phase chemistry and processing conditions on the structural reliability of cold sintered ZnOAbdullah JABR, Department of Materials Science, Montanuniversitaet Leoben, Leoben, Austria
    Haley N. JONES, Materials Science and Engineering Department, The Pennsylvania State University, University Park, United States
    Andrea P. ARGÜELLES,
    Susan TROLIER-MCKINSTRY,
    Clive RANDALL,
    Raul BERMEJO,

    person_pinAbdullah JABR, Department of Materials Science, Montanuniversitaet Leoben, Leoben, Austria
    15:30 - 15:45 | Structures and thermal insulating performance of cold sintered ZSM-5 zeolite ceramicsXiang Ming CHEN, Zhejiang University, Hangzhou, China
    Fu Wei ZHOU, Zhejiang University, Hangzhou, China
    Jun Zhuo SHI, Zhejiang University, Hangzhou, China
    Xiao Li ZHU, Zhejiang University, Hangzhou, China

    person_pinXiang Ming CHEN, Zhejiang University, Hangzhou, China
    K14:00 - 14:30 | Evaluation of the suitability of Pellet Additive Manufacturing technology for the design and manufacture of complex ceramic partsFabrice PETIT, Belgian Ceramic Research Centre, Mons, Belgium
    Cathy DELMOTTE, Belgian Ceramic Research Centre, Mons, Belgium
    Gregory MARTIC, Belgian Ceramic Research Centre, Mons, Belgium
    Enrique JUSTE, Belgian Ceramic Research Centre, Mons, Belgium
    Laurent SPITAELS, University of Mons - Machine Design and Production Engineering Unit, Mons, Belgium
    François DUCOBU, University of Mons - Machine Design and Production Engineering Unit, Mons, Belgium
    Edouard RIVIERE-LORPHEVRE, University of Mons - Machine Design and Production Engineering Unit, Mons, Belgium
    Julien BOSSU, University of Mons - Metallurgy Unit, Mons, Belgium
    Fabienne DELAUNOIS, University of Mons - Metallurgy Unit, Mons, Belgium

    person_pinFabrice PETIT, Belgian Ceramic Research Centre, Mons, Belgium
    14:30 - 14:45 | Additive manufacturing of short and continuous carbon fiber reinforced ceramic matrix composites by fused filament fabricationWolfgang FREUDENBERG, University of Bayreuth, Bayreuth, Germany
    Felix WICH, University of Bayreuth, Bayreuth, Germany
    Jalena BEST, University of Bayreuth, Bayreuth, Germany
    Nico LANGHOF, University of Bayreuth, Bayreuth, Germany
    Stefan SCHAFFÖNER, University of Bayreuth, Bayreuth, Germany

    person_pinWolfgang FREUDENBERG, University of Bayreuth, Bayreuth, Germany
    14:45 - 15:00 | Hybrid additive manufacturing for the fabrication of freeform ceramicsAnna DE MARZI, University of Padova, Padova, Italy
    Paolo COLOMBO, University of Padova, Padova, Italy
    Giorgia FRANCHIN, University of Padova, Padova, Italy

    person_pinAnna DE MARZI, University of Padova, Padova, Italy
    15:00 - 15:15 | MSLA based 3D printing of highly piezoresistive polymer derived SiOC ceramics.Md Sazzadur RAHMAN, University of Calgary, Calgary, Canada
    Seonghwan KIM, University of Calgary, Calgary, Canada

    person_pinMd Sazzadur RAHMAN, University of Calgary, Calgary, Canada
    15:15 - 15:30 | Process Principles of Additive Manufacturing for 3D PiezoceramicsSeongwan JANG, Korea Institute of Materials Sciences, Changwon, Korea (Republic of)
    Hyeon-Jin SON, Korea Institute of Materials Sciences, Changwon, Korea (Republic of)
    Sujin PARK, Korea Institute of Materials Sciences, Changwon, Korea (Republic of)
    Martin SCHWENTENWEIN, Lithoz GmbH, Vienna, Austria
    Christoph HOFSTETTER, Lithoz GmbH, Vienna, Austria
    Chang-Jun BAE, Korea Institute of Materials Sciences, Changwon, Korea (Republic of)

    person_pinSeongwan JANG, Korea Institute of Materials Sciences, Changwon, Korea (Republic of)
    15:30 - 15:45 | Elaboration of lead-free piezoelectric ceramics by Direct Ink Writing for acoustic transducer applicationsNaël MEZDAR, LGEF, EA682 - Institut National des Sciences Appliquées, Université de Lyon, Villeurbanne, France
    Laurence SEVEYRAT, LGEF, EA682 - Institut National des Sciences Appliquées, Université de Lyon, Villeurbanne, France
    Ana BORTA-BOYON, Thales Research and Technology, Palaiseau, France
    Minh-Quyen LE, LGEF, EA682 - Institut National des Sciences Appliquées, Université de Lyon, Villeurbanne, France
    Laurent GREMILLARD, MatéIS, UMR CNRS 5510 - Institut National des Sciences Appliquées, Université de Lyon, Villeurbanne, France
    Pierre-Jean COTTINET, LGEF, EA682 - Institut National des Sciences Appliquées, Université de Lyon, Villeurbanne, France

    person_pinNaël MEZDAR, LGEF, EA682 - Institut National des Sciences Appliquées, Université de Lyon, Villeurbanne, France
    15:45 - 16:00 | Effect of Powder Characteristics on Processing of Alkali Niobate-based Piezoceramics via Vat Polymerization Additive ManufacturingMahmoud MOBIN, Department of Energy Conversion and Storage, Technical University of Denmark, DK-2800 Kgs. Lyngby, Denmark
    Alberto BASSO, Department of Civil and Mechanical Engineering, Technical University of Denmark, DK-2800 Kgs. Lyngby, Denmark
    Anna DANIELAK, Department of Civil and Mechanical Engineering, Technical University of Denmark, DK-2800 Kgs. Lyngby, Denmark
    Venkata Karthik NADIMPALLI, Department of Civil and Mechanical Engineering, Technical University of Denmark, DK-2800 Kgs. Lyngby, Denmark
    David Bue PEDERSEN, Department of Civil and Mechanical Engineering, Technical University of Denmark, DK-2800 Kgs. Lyngby, Denmark
    Vincenzo ESPOSITO, Department of Energy Conversion and Storage, Technical University of Denmark, DK-2800 Kgs. Lyngby, Denmark
    Astri Bjørnetun HAUGEN, Department of Energy Conversion and Storage, Technical University of Denmark, DK-2800 Kgs. Lyngby, Denmark

    person_pinMahmoud MOBIN, Department of Energy Conversion and Storage, Technical University of Denmark, DK-2800 Kgs. Lyngby, Denmark
    14:00 - 14:15 | Keep it simple: ceramic Kelvin cells via LCD-SLA printingSwantje SIMON, Friedrich-Alexander-Universität Erlangen-Nürnberg Institute of Glass and Ceramics, Erlangen, Germany
    Tobias FEY, Friedrich-Alexander-Universität Erlangen-Nürnberg Institute of Glass and Ceramics, Erlangen, Germany

    person_pinSwantje SIMON, Friedrich-Alexander-Universität Erlangen-Nürnberg Institute of Glass and Ceramics, Erlangen, Germany
    14:15 - 14:30 | Direct powder-bed selective laser processing of dense yttria-stabilized zirconia and alumina-toughened zirconia  Eren OZMEN,
    David GROSSIN, CIRIMAT, Université de Toulouse, CNRS, INP-ENSIACET, Toulouse, France
    Pascal LENORMAND, CIRIMAT, Université de Toulouse, CNRS, Université Toulouse 3 - Paul Sabatier, Toulouse , France
    Ghislaine BERTRAND, CIRIMAT, Université de Toulouse, CNRS, INP-ENSIACET, Toulouse, France

    person_pinGhislaine BERTRAND, CIRIMAT, Université de Toulouse, CNRS, INP-ENSIACET, Toulouse, France
    14:30 - 14:45 | Additively manufactured polymer-derived ceramics with hierarchical porosity for chemical engineering applicationsDirk PENNER, ZHAW Zurich University of Applied Sciences, Winterthur, Switzerland

    person_pinDirk PENNER, ZHAW Zurich University of Applied Sciences, Winterthur, Switzerland
    14:45 - 15:00 | Characterization of graphene-reinforced cordierite composites processed by additive manufacturingMaría GARCÍA-MARTÍNEZ, National Institute for Aerospace Technology (INTA), Torrejón de Ardoz, Spain
    Javier HIDALGO , University of Castilla La Mancha (UCLM). ETSII-INEI. DYPAM Research Group, Ciudad Real, Spain
    Beatriz GONZÁLEZ , National Institute for Aerospace Technology (INTA), Torrejón de Ardoz, Spain
    Juan Alfonso NARANJO , University of Castilla La Mancha (UCLM). ETSII-INEI. DYPAM Research Group, Ciudad Real, Spain
    Ana PASTOR , National Institute for Aerospace Technology (INTA), Torrejón de Ardoz, Spain
    Cristina BERGES , University of Castilla La Mancha (UCLM). ETSII-INEI. DYPAM Research Group, Ciudad Real, Spain
    M. Pilar VALLES , National Institute for Aerospace Technology (INTA), Torrejón de Ardoz, Spain
    Marta HERNÁNDEZ , National Institute for Aerospace Technology (INTA), Torrejón de Ardoz, Spain
    Eva MATEO , National Institute for Aerospace Technology (INTA), Torrejón de Ardoz, Spain
    Lorena ILLÁN , National Institute for Aerospace Technology (INTA), Torrejón de Ardoz, Spain
    Eduardo José CUETO , National Institute for Aerospace Technology (INTA), Torrejón de Ardoz, Spain
    Gemma HERRANZ, University of Castilla La Mancha (UCLM). ETSII-INEI. DYPAM Research Group, Ciudad Real, Spain

    person_pinMaría GARCÍA-MARTÍNEZ, National Institute for Aerospace Technology (INTA), Torrejón de Ardoz, Spain
    15:00 - 15:15 | Rapid Fabrication of Ceramic Molds with Integral Core/shell Structures for the Investment Casting of Advanced Turbine BladesKai MIAO, Xi'an Jiaotong University, Xi‘an, China
    Zhongliang LU, Xi'an Jiaotong University, Xi‘an, China
    Sai LI, Xi'an Jiaotong University, Xi‘an, China
    Lingling WU, Xi'an Jiaotong University, Xi‘an, China
    Tengfei LIU, Xi'an Jiaotong University, Xi‘an, China
    Changning SUN, Xi'an Jiaotong University, Xi‘an, China

    person_pinKai MIAO, Xi'an Jiaotong University, Xi‘an, China
    15:15 - 15:30 | 3D printing spatially gradient functional monolithic TS-1 catalyst for continuous scale-up production of ethylene glycolCunbao HUO, Xi'an Jiaotong University, Xi'an, China
    Xiaoyong TIAN, Xi'an Jiaotong University, Xi'an, China
    Zhengping QIU, Xi'an Jiaotong University, Xi'an, China

    person_pinCunbao HUO, Xi'an Jiaotong University, Xi'an, China
    15:30 - 15:45 | Additive manufacturing of transparent 3D glass structures from glass microspheresJozef KRAXNER, FunGlass – Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Študentská 2, 911 50 Trenčín, Trenčin, Slovakia
    Mokhtar MAHMOUD,
    Arish DASAN, FunGlass – Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Študentská 2, 911 50 Trenčín, Trenčin, Slovakia
    Martin MICHÁLEK, FunGlass – Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Študentská 2, 911 50 Trenčín, Trenčin, Slovakia
    Enrico BERNARDO, Department of Industrial Engineering (DII), University of Padova, Via Marzolo 9, 35131 Padova, Italy, Padova, Italy
    DušAn GALUSEK, Joint Glass Centre of the IIC SAS, TnUAD, and FChFT STU, FunGlass, Alexander Dubček University of Trenčín, Trenčín, Slovakia, Trenčín, Slovakia

    person_pinJozef KRAXNER, FunGlass – Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Študentská 2, 911 50 Trenčín, Trenčin, Slovakia
    15:45 - 16:00 | Development of innovative nuclear fuel pellets using additive manufacturingPaul LEMARIGNIER, Laboratoire des Combustibles Uranium – DES/IRESNE/DEC/SA3E/LCU – CEA Cadarache, Saint-Paul-lez-Durance, France
    Olivier FIQUET, Laboratoire des Combustibles Uranium – DES/IRESNE/DEC/SA3E/LCU – CEA Cadarache, Saint-Paul-lez-Durance, France
    Vincent PATELOUP, Institut de Recherche sur les Céramiques – Pôle procédés céramiques – UMR CNRS 7315, Limoges , France

    person_pinPaul LEMARIGNIER, Laboratoire des Combustibles Uranium – DES/IRESNE/DEC/SA3E/LCU – CEA Cadarache, Saint-Paul-lez-Durance, France
    K14:00 - 14:30 | Tuning the mechanical and electrical properties of structural zirconia ceramics with graphene-based nanostructuresAngela GALLARDO-LÓPEZ, Universidad de Sevilla-ICMS (CSIC), Departamento de Física de la Materia Condensada, Apdo. 1065, 41080, Sevilla, Spain
    Carmen MUÑOZ-FERREIRO,
    Cristina LÓPEZ-PERNÍA,
    Helen REVERON, Université de Lyon, INSA Lyon, MATEIS UMR CNRS 5510, 7 Avenue Jean Chapelle, F-69621, Villeurbane Cedex, France
    Jerôme CHEVALIER, Université de Lyon, INSA Lyon, MATEIS UMR CNRS 5510, 7 Avenue Jean Chapelle, F-69621, Villeurbane Cedex, France
    Rocío MORICHE, Universidad de Sevilla-ICMS (CSIC), Departamento de Física de la Materia Condensada, Apdo. 1065, 41080, Sevilla, Spain
    Ana MORALES-RODRÍGUEZ, Universidad de Sevilla-ICMS (CSIC), Departamento de Física de la Materia Condensada, Apdo. 1065, 41080, Sevilla, Spain
    Rosalía POYATO, CSIC-Univ. de Sevilla, Instituto de Ciencia de Materiales de Sevilla (ICMS), Avda. Américo Vespucio 49, 41092 , Sevilla, Spain

    person_pinAngela GALLARDO-LÓPEZ, Universidad de Sevilla-ICMS (CSIC), Departamento de Física de la Materia Condensada, Apdo. 1065, 41080, Sevilla, Spain
    14:30 - 14:45 | ADVANTAGES OF PROCESSING STRUCTURAL COMPOSITES BY GRAPHENE OXIDE, FREEZE CASTING AND SPARK PLASMA SINTERINGJoseph ALEMZADEH, Cardiff School of Engineering, Cardiff University, Cardiff, United Kingdom
    Rut BENAVENTE, Instituto de Tecnología de Materiales ITM, Universitat Politècnica de València, Valencia, Spain, Valencia, Spain
    Amparo BORRELL, Instituto de Tecnología de Materiales ITM, Universitat Politècnica de València, Valencia, Spain, Valencia, Spain
    Sam EVANS, Cardiff School of Engineering, Cardiff University, Cardiff, United Kingdom
    Gao MIN, Cardiff School of Engineering, Cardiff University, Cardiff, United Kingdom
    Victoria GARCÍA ROCHA, Instituto De Ciencia Y Tecnología Del Carbono CSIC, Oviedo, Spain

    person_pinVictoria GARCÍA ROCHA, Instituto De Ciencia Y Tecnología Del Carbono CSIC, Oviedo, Spain
    14:45 - 15:00 | Spark plasma sintering and characterization of GNP-doped B4C-TiB2 ceramicsBerkay UYGUN, Istanbul Technical University, Istanbul, Turkey
    Ipek AKIN, Istanbul Technical University, Istanbul, Turkey
    Filiz SAHIN, Istanbul Technical University, Istanbul, Turkey

    person_pinBerkay UYGUN, Istanbul Technical University, Istanbul, Turkey
    15:00 - 15:15 | Outstanding tribological response of ceramic/graphene composites due to the in-situ formation of rolled graphene flakesManuel BELMONTE, Institute of Ceramics and Glass (ICV-CSIC), Madrid, Spain

    person_pinManuel BELMONTE, Institute of Ceramics and Glass (ICV-CSIC), Madrid, Spain
    15:15 - 15:30 | Tribological behaviour and mechanical properties of graphene platelet reinforced titanium diboride ceramicsAlexandra KOVALCÍKOVÁ, Institute of Materials Research Slovak Academy of Sciences, Košice, Slovakia
    Peter TATARKO, Institute of Inorganic Chemistry Slovak Academy of Sciences, Bratislava, Slovakia
    Richard SEDLÁK, Institute of Materials Research Slovak Academy of Sciences, Košice, Slovakia
    Dávid MEDVED, Institute of Materials Research Slovak Academy of Sciences, Košice, Slovakia
    Zdenek CHLUP, Institute of Physics of Materials, Academy of Sciences of the Czech Republic, Brno, Czechia
    Erika MÚDRA, Institute of Materials Research Slovak Academy of Sciences, Košice, Slovakia
    Ján DUSZA, Institute of Materials Research Slovak Academy of Sciences, Košice, Slovakia

    person_pinAlexandra KOVALCÍKOVÁ, Institute of Materials Research Slovak Academy of Sciences, Košice, Slovakia
    15:30 - 15:45 | Introduction of graphene-based materials in composite metallic coatings development with potential use in combustion engineDimitra GIASAFAKI, MIRTEC S.A, Schimatari, Greece
    Petros IOANNOU, MIRTEC S.A, Schimatari, Greece
    Constantina ANDREOULI, MIRTEC S.A, Schimatari, Greece
    Chara SARAFOGLOU, Shipbuilding Technology Laboratory, School of Naval Architecture and Marine Engineering, National Technical University of Athens, Zografos, Greece
    Ilias GEORGIOPOULOS, MIRTEC S.A, Schimatari, Greece

    person_pinIlias GEORGIOPOULOS, MIRTEC S.A, Schimatari, Greece
    15:45 - 16:00 | Nanocomposite Ceramics for Armour Applications: An Investigation of Properties, Microstructures, and PerformanceRobert CROOKES, Lucideon Ltd, Stoke-On-Trent, United Kingdom
    Jon BINNER, University of Birmingham, Birmingham, United Kingdom
    Vaidhy VAIDHYANATHAN, Loughborough University, Loughborough, United Kingdom
    Kieran WHITE, Loughborough University, Loughborough, United Kingdom
    Adam HEALEY, QinetiQ, Farnborough, United Kingdom
    Charles FOOTER, QinetiQ, Farnborough, United Kingdom

    person_pinRobert CROOKES, Lucideon Ltd, Stoke-On-Trent, United Kingdom
    K14:00 - 14:30 | Addressing Challenges to the Application of UHTCs in Extreme EnvironmentsMichael CINIBULK, Air Force Research Laboratory, WPAFB, United States

    person_pinMichael CINIBULK, Air Force Research Laboratory, WPAFB, United States
    14:30 - 14:45 | Novel Engineered UHTC Ceramics for High Temperature Absorbers of Concentrated Solar Radiation  Elisa SANI, National Institute of Optics, National Research Council (CNR-INO) , Firenze, Italy
    Luca MERCATELLI, National Institute of Optics, National Research Council (CNR-INO) , Firenze, Italy
    Luca ZOLI, Institute of Science Technology and Sustainability for Ceramics, National Research Council (CNR-ISSMC), Faenza, Italy
    Laura SILVESTRONI, Institute of Science Technology and Sustainability for Ceramics, National Research Council (CNR-ISSMC), Faenza, Italy
    Diletta SCITI, Institute of Science Technology and Sustainability for Ceramics, National Research Council (CNR-ISSMC), Faenza, Italy

    person_pinElisa SANI, National Institute of Optics, National Research Council (CNR-INO) , Firenze, Italy
    14:45 - 15:00 | Oxidation behaviour of ZrB2/SiC-based UHTCMCs with HfB2 and MoSi2 graded structuresAntonio VINCI, Institute of Science, Technology and Sustainability for Ceramics - National Research Council, Faenza, Italy
    Luca ZOLI, Institute of Science, Technology and Sustainability for Ceramics - National Research Council, Faenza, Italy
    Diletta SCITI, Institute of Science, Technology and Sustainability for Ceramics - National Research Council, Faenza, Italy
    Stefano MUNGIGUERRA, University of Naples, Federico II - Dept. of Industrial Engineering, Naples, Italy
    Anselmo CECERE, University of Naples, Federico II - Dept. of Industrial Engineering, Naples, Italy
    Raffaele SAVINO, University of Naples, Federico II - Dept. of Industrial Engineering, Naples, Italy

    person_pinAntonio VINCI, Institute of Science, Technology and Sustainability for Ceramics - National Research Council, Faenza, Italy
    15:00 - 15:15 | Effect of Yb2O3 additive on the ablation resistance of ZrB2–SiC and HfB2–SiC ultra-high temperature ceramics  Hakan ÜNSAL, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Dúbravska cesta 9, 845 36, Bratislava, Slovakia
    Alexandra KOVALCÍKOVÁ, Institute of Materials Research, Slovak Academy of Sciences, Watsonova 47, 04001, Košice, Slovakia
    Zdenek CHLUP, Institute of Physics of Materials, Czech Academy of Sciences, Žižkova 22, 616 62, Brno, Czechia
    Monika TATARKOVÁ, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Dúbravska cesta 9, 845 36, Bratislava, Slovakia
    Michal HICÁK, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Dúbravska cesta 9, 845 36, Bratislava, Slovakia
    Ivo DLOUHÝ, Institute of Physics of Materials, Czech Academy of Sciences, Žižkova 22, 616 62, Brno, Czechia
    Peter TATARKO, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Dúbravska cesta 9, 845 36, Bratislava, Slovakia

    person_pinHakan ÜNSAL, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Dúbravska cesta 9, 845 36, Bratislava, Slovakia
    15:15 - 15:30 | Pressureless SPS as a Means for Consolidating Complex Parts of Ultra-High Temperature Ceramics Produced by Direct Ink WritingFlorencia M. NOGALES, Universidad de Extremadura, Badajoz, Spain
    Antonia PAJARES, Universidad de Extremadura, Badajoz, Spain
    Angel L. ORTIZ, Universidad de Extremadura, Badajoz, Spain
    Pedro MIRANDA, Universidad de Extremadura, Badajoz, Spain

    person_pinFlorencia M. NOGALES, Universidad de Extremadura, Badajoz, Spain
    15:30 - 15:45 | Low-temperature method of obtaining a high-strength composite from boron carbide and an intermetallic compound from Ti-Si systemDawid KOZIEN, AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Department of Ceramics and Refractories, Cracow, Poland
    Pawem NIERODA, Department of Inorganic Chemistry, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Cracow, Poland
    Katarzyna PASIUT, AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Department of Ceramics and Refractories, Cracow, Poland
    Magda ZI?BKA, AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Department of Ceramics and Refractories, Cracow, Poland
    Zbigniew PEDZICH, AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Department of Ceramics and Refractories, Cracow, Poland

    person_pinDawid KOZIEN, AGH University of Science and Technology, Faculty of Materials Science and Ceramics, Department of Ceramics and Refractories, Cracow, Poland
    K14:00 - 14:30 | Thin film oxides for solid-state ionics and iontronics devicesAlbert TARANCÓN,
    Francesco CHIABRERA, IREC, Sant Adrià del Besòs (Barcelona), Spain
    Juan De Dios SIRVENT, IREC, Sant Adrià del Besòs (Barcelona), Spain
    Philipp LANGNER, IREC, Sant Adrià del Besòs (Barcelona), Spain
    Fjorelo BUZI, IREC, Sant Adrià del Besòs (Barcelona), Spain
    Kosova KREKA, IREC, Sant Adrià del Besòs (Barcelona), Spain
    Fernanda MONTEIRO, IREC, Sant Adrià del Besòs (Barcelona), Spain
    Juan Carlos GONZALEZ-ROSILLO, IREC, Sant Adrià del Besòs (Barcelona), Spain
    Nerea ALAYO, IREC, Sant Adrià del Besòs (Barcelona), Spain
    Alex MORATA, IREC, Sant Adrià del Besòs (Barcelona), Spain
    Federico BAIUTTI, IREC, Sant Adrià del Besòs (Barcelona), Spain

    person_pinAlbert TARANCÓN, IREC, Sant Adrià del Besòs (Barcelona), Spain; ICREA, Barcelona, Spain
    14:30 - 14:45 | Thin layers of annealed Gallium-doped Zinc oxide (ZnO:Ga) thin films for NO2 sensingBenjamin PARET,
    Philippe MENINI, Laboratoire d’Analyse et d’Architecture des Systèmes (LAAS), Université de Toulouse, CNRS, UPS, Toulouse, France
    Thimont YOHANN, CIRIMAT, Université Toulouse 3 Paul Sabatier, Toulouse, France
    Antoine BARNABÉ, CIRIMAT, Université Toulouse 3 Paul Sabatier, Toulouse, France
    Thierry CAMPS, Laboratoire d’Analyse et d’Architecture des Systèmes (LAAS), Université de Toulouse, CNRS, UPS, Toulouse, France
    Laurent MAZENQ, Laboratoire d’Analyse et d’Architecture des Systèmes (LAAS), Université de Toulouse, CNRS, UPS, Toulouse, France
    Lionel PRESMANES, CIRIMAT, Université Toulouse 3 Paul Sabatier, Toulouse, France

    person_pinBenjamin PARET, CIRIMAT, Université Toulouse 3 Paul Sabatier, Toulouse, France; Laboratoire d’Analyse et d’Architecture des Systèmes (LAAS), Université de Toulouse, CNRS, UPS, Toulouse, France
    14:45 - 15:00 | Novel Nanoscale optimized electrodes and proton ceramic electrolytes for electrochemical reactionsMarie-Laure FONTAINE , SINTEF AS , Oslo , Norway
    Einar VØLLESTAD, SINTEF AS , Oslo , Norway
    Elena STEFAN, SINTEF AS , Oslo , Norway
    Ragnar STRANDBAKKE, SINTEF AS , Oslo , Norway

    person_pinMarie-Laure FONTAINE , SINTEF AS , Oslo , Norway
    15:00 - 15:15 | High dielectric breakdown field strength and high thermal conductivity of magnetron sputtered AlN thin filmsZakhar KUDRYNSKYI, The University of Nottingham, NOTTINGHAM, United Kingdom
    Cooper TIMOTHY, The University of Nottingham, NOTTINGHAM, United Kingdom
    Wadge MATTHEW, The University of Nottingham, NOTTINGHAM, United Kingdom
    Zheng XIANG, Centre for Device Thermography and Reliability, University of Bristol, Bristol, United Kingdom
    Connor PETER, The University of Nottingham, NOTTINGHAM, United Kingdom
    Kerfoot JAMES, Park Systems UK Limited, Nottingham, United Kingdom
    Korolkov VLADIMIR, Park Systems UK Limited, Nottingham, United Kingdom
    Gerada CHRIS, The University of Nottingham, NOTTINGHAM, United Kingdom
    Kuball MARTIN, Centre for Device Thermography and Reliability, University of Bristol, Bristol, United Kingdom
    Grant DAVID, The University of Nottingham, NOTTINGHAM, United Kingdom

    person_pinZakhar KUDRYNSKYI, The University of Nottingham, NOTTINGHAM, United Kingdom
    15:15 - 15:30 | Synthesis, structural characterisation, and ion conductivity of Mg1+x/2Zr4P6-xSixO24Becky STEADMAN, University of Birmingham, Birmingham, United Kingdom
    Sean BUTTERWORTH, BAE Systems Air – Micro & Nano Systems, Filton, United Kingdom
    Jon BINNER, University of Birmingham, Birmingham, United Kingdom

    person_pinBecky STEADMAN, University of Birmingham, Birmingham, United Kingdom
    15:30 - 15:45 | Oxygen vacancy ordering and corrosion behavior of ZnO doped CeYSZ for solid oxide membraneHwanseok LEE, School of Materials Science and Engineering, Pusan National University, Busan, Korea (Republic of)
    Seonghoon KIM, School of Materials Science and Engineering, Pusan National University, Busan, Korea (Republic of)
    Yong-Nam KIM, Material Technology Center, Korea Testing Laboratory, Seoul, Korea (Republic of)
    Yeon-Sook LEE, Material Technology Center, Korea Testing Laboratory, Seoul, Korea (Republic of)
    Heesoo LEE, School of Materials Science and Engineering, Pusan National University, Busan, Korea (Republic of)

    person_pinHwanseok LEE, School of Materials Science and Engineering, Pusan National University, Busan, Korea (Republic of)
    15:45 - 16:00 | Plasma etching behavior of nanocomposite ceramics in semiconductor manufacturing etching chamber Ho Jin MA, Korea Institute of Materials Science (KIMS), Changwon, Korea (Republic of)
    Ha-Neul KIM, Korea Institute of Materials Science (KIMS), Changwon, Korea (Republic of)
    Jae-Woong KO, Korea Institute of Materials Science (KIMS), Changwon, Korea (Republic of)
    Jae-Wook LEE, Korea Institute of Materials Science (KIMS), Changwon, Korea (Republic of)
    Mi-Ju KIM, Korea Institute of Materials Science (KIMS), Changwon, Korea (Republic of)
    Young-Jo PARK, Korea Institute of Materials Science (KIMS), Changwon, Korea (Republic of)

    person_pinHo Jin MA, Korea Institute of Materials Science (KIMS), Changwon, Korea (Republic of)
    K14:00 - 14:30 | Determination of oxygen diffusion and surface exchange coefficients of mixed ionic-electronic conductors by semi-permeation methodPierre-Marie GEFFROY, CNRS, Institut de Recherche sur les Céramiques (IRCER), UMR 7315, Limoges, France
    Thierry CHARTIER , CNRS, Institut de Recherche sur les Céramiques (IRCER), UMR 7315, Limoges, France
    Jacques FOULETIER, Univ. Grenoble Alpes, Univ. Savoie Mont Blanc, CNRS, Grenoble INP, LEPMI, , Grenoble, France
    Jean-Marc BASSAT, CNRS, Univ. Bordeaux, Bordeaux INP, ICMCB, UMR 5026, Bordeaux, France

    person_pinPierre-Marie GEFFROY, CNRS, Institut de Recherche sur les Céramiques (IRCER), UMR 7315, Limoges, France
    14:30 - 14:45 | Glass-ceramic sealants for protonic ceramic cell assemblySimone ANELLI, Politecnico di Torino, Turin, Italy
    Gabriele DEALBERTI, Politecnico di Torino, Turin, Italy
    Andrea BAGGIO, Politecnico di Torino, Turin, Italy
    Domenico FERRERO, Politecnico di Torino, Turin, Italy
    Daniel SCHMIDER, European Institute for Energy Research (EIFER), Karlsruhe, Germany
    Julian DAILLY, European Institute for Energy Research (EIFER), Karlsruhe, Germany
    Massimo SANTARELLI, Politecnico di Torino, Turin, Italy
    Federico SMEACETTO, Politecnico di Torino, Turin, Italy

    person_pinSimone ANELLI, Politecnico di Torino, Turin, Italy
    14:45 - 15:00 | Development of redox-stable electrodes for hydrocarbons conversion in proton ceramic cellsElena BARRIO QUEROL, Instituto de tecnología química (Universitat Politècnica de València – Consejo Superior de Investigaciones Científicas), Valencia, Spain
    Laura ALMAR, Instituto de tecnología química (Universitat Politècnica de València – Consejo Superior de Investigaciones Científicas), Valencia, Spain
    Nuria BAUSÁ, Instituto de tecnología química (Universitat Politècnica de València – Consejo Superior de Investigaciones Científicas), Valencia, Spain
    María FABUEL, Instituto de tecnología química (Universitat Politècnica de València – Consejo Superior de Investigaciones Científicas), Valencia, Spain
    Sonia ESCOLÁSTICO, Instituto de tecnología química (Universitat Politècnica de València – Consejo Superior de Investigaciones Científicas), Valencia, Spain
    José Manuel SERRA, Instituto de tecnología química (Universitat Politècnica de València – Consejo Superior de Investigaciones Científicas), Valencia, Spain

    person_pinElena BARRIO QUEROL, Instituto de tecnología química (Universitat Politècnica de València – Consejo Superior de Investigaciones Científicas), Valencia, Spain
    15:00 - 15:15 | Structure, diffusion and self-diffusion coefficients of the proton substituted β-alumina.Viktoria KAPLANOVA, Saint Petersburg State University, Saint Petersburg, Russian Federation
    Vladimir KONAKOV, Peter the Great State Polytechnic University, Saint Petersburg, Russian Federation
    Olga KURAPOVA, Saint Petersburg State University, Saint Petersburg, Russian Federation

    person_pinViktoria KAPLANOVA, Saint Petersburg State University, Saint Petersburg, Russian Federation
    15:15 - 15:30 | Conductivity and transport properties of proton-conducting polyantimonic acid based solid electrolytesOlga KURAPOVA, Saint Petersburg University, Saint Petersburg, Russian Federation
    Anna VOLKOVA, Saint Petersburg University, Saint Petersburg, Russian Federation
    Artem ZARIPOV, Saint Petersburg University, Saint Petersburg, Russian Federation
    Pedro FAIA, University of Coimbra, CEMMPRE – Electrical and Computer Engineering Department, FCTUC, Coimbra, Portugal
    Vladimir KONAKOV, Institute of Problems of Mechanical Engineering, RAS, Saint Petersburg, Russian Federation

    person_pinOlga KURAPOVA, Saint Petersburg University, Saint Petersburg, Russian Federation
    HL14:00 - 14:30 | Hybrid ?4D electroactive bioceramic- based materials for bone healing applications.Ana FERRANDEZ-MONTERO, Institute of Ceramic and Glass (CSIC), Madrid, Spain
    Pablo ORTEGA COLUMBRANS, COLFEED4Print, Madrid, Spain
    Oxel URRA, Institute of Ceramic and Glass (CSIC), Madrid, Spain
    Antonio Javier SANCHEZ HERENCIA, Institute of Ceramic and Glass (CSIC), Madrid, Spain
    Begoña FERRARI, Institute of Ceramic and Glass (CSIC), Madrid, Spain

    person_pinAna FERRANDEZ-MONTERO, Institute of Ceramic and Glass (CSIC), Madrid, Spain
    14:30 - 14:45 | 3D printing of copper-doped calcium deficient hydroxyapatite for synthetic bone graft.Florian BIOTTEAU, Université Clermont Auvergne, Clermont Auvergne INP, CNRS, ICCF, Aubière, France
    Charlotte VICHERY, Université Clermont Auvergne, Clermont Auvergne INP, CNRS, ICCF, Aubière, France
    Stéphane DESCAMPS, Université Clermont Auvergne, Clermont Auvergne INP, CNRS, ICCF, Aubière, France
    David MARCHAT, Mines Saint-Etienne, Univ Lyon, Univ Jean Monnet, INSERM, U 1059 Sainbiose, Centre CIS, Saint-Etienne, France
    Jean-Marie NEDELEC, Université Clermont Auvergne, Clermont Auvergne INP, CNRS, ICCF, Aubière, France

    person_pinFlorian BIOTTEAU, Université Clermont Auvergne, Clermont Auvergne INP, CNRS, ICCF, Aubière, France
    14:45 - 15:00 | Green nanocomposite electrospun meshes based on poly(?-caprolactone)/borosilicate glass compositions for tissue engineeringSoraia COELHO, Department of Materials and Ceramic Engineering, CICECO - Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    Jula KNIEP, Faculty 5 – Nature and Engineering, University of Applied Sciences, Bremen, Germany
    Nathalie BARROCA, Center for Mechanical Technology & Automation (TEMA), Mechanical Engineering Department, University of Aveiro, Aveiro, Portugal
    José Carlos ALMEIDA, Department of Materials and Ceramic Engineering, CICECO - Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    Maria Helena VAZ FERNANDES, Department of Materials and Ceramic Engineering, CICECO - Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal

    person_pinJosé Carlos ALMEIDA, Department of Materials and Ceramic Engineering, CICECO - Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    15:00 - 15:15 | FLOW BEHAVIOR AND EXTRUSION OF ION-DOPED HYDROXYAPATITE SLURRIESZahid ABBAS,
    Massimiliano DAPPORTO, Istituto di Scienza, Tecnologia e Sostenibilità per lo Sviluppo dei Materiali Ceramici-Consiglio Nazionale Delle Ricerche (ISSMC-CNR), Faenza, Italy
    Davide GARDINI, Istituto di Scienza, Tecnologia e Sostenibilità per lo Sviluppo dei Materiali Ceramici-Consiglio Nazionale Delle Ricerche (ISSMC-CNR), Faenza, Italy
    Anna TAMPIERI, Istituto di Scienza, Tecnologia e Sostenibilità per lo Sviluppo dei Materiali Ceramici-Consiglio Nazionale Delle Ricerche (ISSMC-CNR), Faenza, Italy
    Simone SPRIO, Istituto di Scienza, Tecnologia e Sostenibilità per lo Sviluppo dei Materiali Ceramici-Consiglio Nazionale Delle Ricerche (ISSMC-CNR), Faenza, Italy

    person_pinZahid ABBAS, Istituto di Scienza, Tecnologia e Sostenibilità per lo Sviluppo dei Materiali Ceramici-Consiglio Nazionale Delle Ricerche (ISSMC-CNR), Faenza, Italy; University of Bologna, Bologna, Italy
    15:15 - 15:30 | Promoting the Integration of Polyether-ether-ketone with Natural Tissue by Additive Manufactured Scaffolds with Bioceramic FillerChangning SUN,
    Kai MIAO, State Key Laboratory for Manufacturing System Engineering, School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an, China
    Chaozong LIU, Institute of Orthopaedic & Musculoskeletal Science, University College London, London, United Kingdom
    Dichen LI, State Key Laboratory for Manufacturing System Engineering, School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an, China

    person_pinChangning SUN, State Key Laboratory for Manufacturing System Engineering, School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an, China; Institute of Orthopaedic & Musculoskeletal Science, University College London, London, United Kingdom
    K14:00 - 14:30 | Cold sintering assisted polycondensation of iron-rich aluminosilicates geopolymers: effects of additionKamseu ELIE, Local Materials Promotion Authority/MIPROMALO, Yaounde, Cameroon
    Mattia BIESUZ, Departement of Industrial Technologies, University of Trento, Trento, Italy
    Cristina LEONELLI, Departement of Engineering "Enzo Ferrari", University of Modena and Reggio Emilia, Modena, Italy
    Vincenzo SGLAVO, Departement of Industrial Technologies, University of Trento, Trento, Italy

    person_pinKamseu ELIE, Local Materials Promotion Authority/MIPROMALO, Yaounde, Cameroon
    14:30 - 14:45 | ALKALI-ACTIVATED COMPOSITES CONTAINING INDUSTRIAL WASTES REINFORCED WITH BAMBOO FIBRESStefania MANZI, Dipartimento di Ingegneria Civile, Chimica, Ambientale e dei Materiali, Università di Bologna, Via Terracini, Bologna, Italy
    Luisa MOLARI, Dipartimento di Ingegneria Civile, Chimica, Ambientale e dei Materiali, Università di Bologna, Via Terracini, Bologna, Italy
    Maria Chiara BIGNOZZI, Dipartimento di Ingegneria Civile, Chimica, Ambientale e dei Materiali, Università di Bologna, Via Terracini, Bologna, Italy
    Giulia MASI, Dipartimento di Ingegneria Civile, Chimica, Ambientale e dei Materiali, Università di Bologna, Via Terracini, Bologna, Italy
    Andrea SACCANI, Dipartimento di Ingegneria Civile, Chimica, Ambientale e dei Materiali, Università di Bologna, Via Terracini, Bologna, Italy

    person_pinAndrea SACCANI, Dipartimento di Ingegneria Civile, Chimica, Ambientale e dei Materiali, Università di Bologna, Via Terracini, Bologna, Italy
    14:45 - 15:00 | High temperature behaviour of volcanic ashes-based alkali-activated materials (Mt. Etna, Italy)Paolo SCANFERLA, IRCER (Institut de Recherche sur les Céramiques), University of Limoges, 12, Rue Atlantis, 87100 Limoges, France
    Claudio FINOCCHIARO, University of Catania, Catania, Corso Italia, 57 (95129), Italy
    Germana BARONE, University of Catania, Catania, Corso Italia, 57 (95129), Italy
    Paolo MAZZOLENI, University of Catania, Catania, Corso Italia, 57 (95129), Italy
    Ameni GHARZOUNI, IRCER (Institut de Recherche sur les Céramiques), University of Limoges, 12, Rue Atlantis, 87100 Limoges, France
    Sylvie ROSSIGNOL, IRCER (Institut de Recherche sur les Céramiques), University of Limoges, 12, Rue Atlantis, 87100 Limoges, France

    person_pinClaudio FINOCCHIARO, University of Catania, Catania, Corso Italia, 57 (95129), Italy
    15:00 - 15:15 | Effect of exposure to high temperature on the physical and microstructural properties of metakaolin based geopolymerYawo Daniel ADUFU, Laboratoire Eco-Matériaux et Habitats Durables (LEMHaD), Institut International d’Ingénierie de l’Eau et de l’Environnement (Institut 2iE), Ouagadougou, Burkina Faso
    Seick Omar SORE, Département Génie Civil de l’Institut Universitaire de Technologie / Laboratoire de Chimie et Energies Renouvelables (LaCER), Unité de Recherche en Physico Chimie et Technologie des Matériaux, Université Nazi BONI, Ouagadougou, Burkina Faso
    Philbert NSHIMIYIMANA, Laboratoire Eco-Matériaux et Habitats Durables (LEMHaD), Institut International d’Ingénierie de l’Eau et de l’Environnement (Institut 2iE), Ouagadougou, Burkina Faso
    Adamah MESSAN, Laboratoire Eco-Matériaux et Habitats Durables (LEMHaD), Institut International d’Ingénierie de l’Eau et de l’Environnement (Institut 2iE), Ouagadougou, Burkina Faso
    Gilles ESCADEILLAS, LMDC-INSA, Université de Toulouse ; UPS, INSA ; Laboratoire Matériaux et Durabilité des Constructions , Toulouse, France

    person_pinPhilbert NSHIMIYIMANA, Laboratoire Eco-Matériaux et Habitats Durables (LEMHaD), Institut International d’Ingénierie de l’Eau et de l’Environnement (Institut 2iE), Ouagadougou, Burkina Faso
    15:15 - 15:30 | Impact of the partial replacement of metakaolin by melamine in alkali-activation enhanced with microwaveBarbara HORVAT, Slovenian National Building and Civil Engineering Institute, Ljubljana, Slovenia
    Branka MUŠIC, Slovenian National Building and Civil Engineering Institute, Ljubljana, Slovenia
    NatašA KNEZ, Slovenian National Building and Civil Engineering Institute, Ljubljana, Slovenia

    person_pinBarbara HORVAT, Slovenian National Building and Civil Engineering Institute, Ljubljana, Slovenia
    15:30 - 15:45 | Alkali-activation and chemical stabilization of incineration fly ash using slag for dangerous waste storageTimothée JALLOUX,
    Sylvain MEILLE, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS UMR5510, Villeurbanne, France
    Elodie PRUD'HOMME, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS UMR5510, Villeurbanne, France
    Jean-Yves RICHARD, SARPI MINERAL SOLUTIONS, Saint-Priest, France

    person_pinTimothée JALLOUX, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS UMR5510, Villeurbanne, France; SARPI MINERAL SOLUTIONS, Saint-Priest, France
    K14:00 - 14:30 | A deep-learning algorithm for the XRD-determination of strain profiles in irradiated materialsAlexandre BOULLE, IRCER CNRS, Limoges, France
    Aurélien DEBELLE, IJCLab Université Paris-Saclay, CNRS/IN2P3, Orsay, France

    person_pinAlexandre BOULLE, IRCER CNRS, Limoges, France
    14:30 - 14:45 | Porous ceramics – why it’s important to identify the representative volume-of-interesTobias FEY, Friedrich-Alexander-University Erlangen-Nürnberg, Erlangen, Germany

    person_pinTobias FEY, Friedrich-Alexander-University Erlangen-Nürnberg, Erlangen, Germany
    14:45 - 15:00 | 3D discrete modeling of plasma sprayed ceramics microstructureVincent LONGCHAMP, Arts et Métiers Science et Technologie – I2M, Talence, France
    Damien ANDRÉ, IRCER - Limoges university, Limoges, France
    Jérémie GIRARDOT, Arts et Métiers Science et Technologie – I2M, Talence, France
    Frédéric MALAISE, CEA CESTA, Le Barp, France
    Ivan IORDANOFF, Arts et Métiers Science et Technologie – I2M, Talence, France

    person_pinDamien ANDRÉ, IRCER - Limoges university, Limoges, France
    15:00 - 15:15 | Investigation of  Interlaminar Tension Test Techniques at both room and high temperature on SiCf/SiC Ceramic Matrix CompositesChristopher D NEWTON, Institute of Structural Materials, Swansea University, Swansea, SA1 8EN, United Kingdom
    Spencer P JEFFS, Institute of Structural Materials, Swansea University, Swansea, SA1 8EN, United Kingdom
    Jason D BAKER, Rolls-Royce Corporation, 546 South Meridian St, Indianapolis, Indiana, United States
    Gonzalo GARCIA-LUNA, Rolls-Royce PLC, PO Box 31, Derby, DE24 8BJ, United Kingdom

    person_pinChristopher D NEWTON, Institute of Structural Materials, Swansea University, Swansea, SA1 8EN, United Kingdom
    15:15 - 15:30 | Multi-scale characterization and fabrication of nanocomposite ceramics with improved toughness.Edoardo ROSSI, Università degli Studi Roma Tre, Rome, Italy
    Marco SEBASTIANI, Università degli Studi Roma Tre, Rome, Italy
    Elisa FIUME, Politecnico di Torino, Turin, Italy
    Paola PALMERO, Politecnico di Torino, Turin, Italy
    Laura MONTANARO, Politecnico di Torino, Turin, Italy

    person_pinEdoardo ROSSI, Università degli Studi Roma Tre, Rome, Italy
    HL14:00 - 14:30 | FunGlass: Where making research is funDusan GALUSEK, Centre for functional and surface-functionalized glass, Trencin, Slovakia

    person_pinDusan GALUSEK, Centre for functional and surface-functionalized glass, Trencin, Slovakia
    HL14:30 - 15:00 | Ultrasound-induced mechanoluminescence and thermo-acoustic heating using multi-responsive glasses, ceramics and glass ceramicsLothar WONDRACZEK, University of Jena, Jena, Germany

    person_pinLothar WONDRACZEK, University of Jena, Jena, Germany
    15:00 - 15:15 | TiO2 Nanorods on Glass MicrospheresOrhan SISMAN, FunGlass-Center for Functional and Surface functionalized Glasses, Alexander Dubček University of Trenčín, Trenčín , Slovakia
    Haritha HARIDASAN, FunGlass-Center for Functional and Surface functionalized Glasses, Alexander Dubček University of Trenčín, Trenčín , Slovakia
    Roman SAJZEW, Otto Schott Institute of Materials Research, Friedrich Schiller University Jena, Jena, Germany
    Jozef KRAXNER, FunGlass-Center for Functional and Surface functionalized Glasses, Alexander Dubček University of Trenčín, Trenčín , Slovakia
    Mokhtar MAHMOUD, FunGlass-Center for Functional and Surface functionalized Glasses, Alexander Dubček University of Trenčín, Trenčín , Slovakia
    Jose VELAZQUEZ, FunGlass-Center for Functional and Surface functionalized Glasses, Alexander Dubček University of Trenčín, Trenčín , Slovakia
    Lothar WONDRACZEK, Otto Schott Institute of Materials Research, Friedrich Schiller University Jena, Jena, Germany
    DušAn GALUSEK ,

    person_pinJose VELAZQUEZ, FunGlass-Center for Functional and Surface functionalized Glasses, Alexander Dubček University of Trenčín, Trenčín , Slovakia
    15:15 - 15:30 | YAG: Eu and YAG: Pr microspheres for high-power LED color convertersMarzieh GHADAMYARI, FUNGLASS – CENTRE FOR FUNCTIONAL AND SURFACE FUNCTIONALIZED GLASS, Trencin, Slovakia
    Gurdial BULGAN, Swiss Federal Laboratories for Materials Science and Technology (Empa), Zurich, Switzerland
    Milan PARCHOVIANSKY, FUNGLASS – CENTRE FOR FUNCTIONAL AND SURFACE FUNCTIONALIZED GLASS, Trencin, Slovakia
    Róbert KLEMENT, FUNGLASS – CENTRE FOR FUNCTIONAL AND SURFACE FUNCTIONALIZED GLASS, Trencin, Slovakia
    DušAn GALUSEK,
    Monika MICHALKOVA, Vitrum Laugaricio – Joint Glass Centre of the IIC SAS, TnU AD, FChPT STU and RONA, a.s., Trencin, Slovakia

    person_pinMarzieh GHADAMYARI, FUNGLASS – CENTRE FOR FUNCTIONAL AND SURFACE FUNCTIONALIZED GLASS, Trencin, Slovakia
    15:30 - 15:45 | Dual-emitting Ce/Eu:YAG nanophosphor for application in white LEDsBruno WOLFRUM, FunGlass, Alexander Dubcek University of Trencin, Trencin, Slovakia
    Robert KLEMENT, FunGlass, Alexander Dubcek University of Trencin, Trencin, Slovakia
    Lothar WONDRACZEK, Otto Schott Institute of Materials Research, Friedrich Schiller University Jena, Jena, Germany
    DušAn GALUSEK,

    person_pinBruno WOLFRUM, FunGlass, Alexander Dubcek University of Trencin, Trencin, Slovakia
    15:45 - 16:00 | Additives for densification of fine-grained Y2O3: from solid state to liquid phase sinteringAliasghar NAJAFZADEHKHOEE, Joint Glass Centre of the IIC SAS, TNUAD, and FChPT STU, Trenčín, Slovakia
    Ali TALIMIAN, Centre for Functional and Surface Functionalised Glass, Alexander Dubček University of Trenčín, Študentská 2, 91150 Trenčín, Slovakia, Trenčín, Slovakia
    Vladimír GIRMAN, Institute of Materials Research, Slovak Academy of Sciences, Watsonova 47, 040 01 Košice, Slovakia , Košice, Slovakia
    Rosalía POYATO, Instituto de Ciencia de Materiales de Sevilla (CSIC-US), Américo Vespucio 49, Sevilla,41092, Spain, Sevilla, Spain
    Angela GALLARDO-LÓPEZ,
    Felipe GUTIÉRREZ-MORA,
    Pavol HVIZDOŠ, Institute of Materials Research, Slovak Academy of Sciences, Watsonova 47, 040 01 Košice, Slovakia , Košice, Slovakia
    Karel MACA,
    DušAn GALUSEK,

    person_pinAliasghar NAJAFZADEHKHOEE, Joint Glass Centre of the IIC SAS, TNUAD, and FChPT STU, Trenčín, Slovakia
    16:30 - 16:45 | In situ generated Yb2Si2O7 environmental barrier coatings suitable for applications in gas turbinesGuenter MOTZ, University of Bayreuth, Chair for Ceramic Materials Engineering, Bayreuth, Germany
    Mateus LENZ-LEITE, University of Bayreuth, Chair for Ceramic Materials Engineering, Bayreuth, Germany
    Alexander HORCHER, University of Bayreuth, Chair for Ceramic Materials Engineering, Bayreuth, Germany
    Stefan SCHAFFOENER, University of Bayreuth, Chair for Ceramic Materials Engineering, Bayreuth, Germany

    person_pinGuenter MOTZ, University of Bayreuth, Chair for Ceramic Materials Engineering, Bayreuth, Germany
    16:45 - 17:00 | Multicomponent reare earth zirconates for thermal barier coatings optimised by machine learningAcacio RINCON ROMERO, University of Nottingham, Nottingham, United Kingdom
    Amiya CHOWDHURY, University of Nottingham, Nottingham, United Kingdom
    Grazziela FIGUEREDO, University of Nottingham, Nottingham, United Kingdom
    Tanvir HUSSAIN, University of Nottingham, Nottingham, United Kingdom

    person_pinAcacio RINCON ROMERO, University of Nottingham, Nottingham, United Kingdom
    17:00 - 17:15 | Discovery of multi-entropy rare earth monosilicates for enviornmental barrier coatings via machine learningBuhao ZHANG, Faculty of Engineering, University of Nottingham, Nottingham, United Kingdom
    Hangfeng ZHANG, School of Engineering and Materials Science, Queen Mary University of London, London, United Kingdom
    Yunpeng ZHU, School of Engineering and Materials Science, Queen Mary University of London, London, United Kingdom
    Amiya CHOWDHURY, Faculty of Engineering, University of Nottingham, Nottingham, United Kingdom
    Acacio ROMERO, Faculty of Engineering, University of Nottingham, Nottingham, United Kingdom
    Grazziela FIGUEREDO, School of Computer Science, University of Nottingham, Nottingham, United Kingdom
    Tanvir HUSSAIN, Faculty of Engineering, University of Nottingham, Nottingham, United Kingdom

    person_pinBuhao ZHANG, Faculty of Engineering, University of Nottingham, Nottingham, United Kingdom
    17:15 - 17:30 | Machine learning approaches for rare-earth silicate environmental barrier coating thermodynamic property predictionsCameron BODENSCHATZ, NASA Glenn Research Center, Cleveland, United States
    Wissam SAIDI,
    Jamesa STOKES, NASA Glenn Research Center, Cleveland, United States

    person_pinCameron BODENSCHATZ, NASA Glenn Research Center, Cleveland, United States
    17:30 - 17:45 | Development of duplex coatings combining cold spray of aluminium with ceramic and plasma electrolytic oxidation processArthur MAIZERAY, Institut Jean Lamour, Nancy, France

    person_pinArthur MAIZERAY, Institut Jean Lamour, Nancy, France
    HL16:30 - 17:00 | Cold sintering of high performance electro-ceramics and compositesJing GUO, Xi'an Jiaotong University, Xi'an, China
    Hong WANG, Southern University of Science and Technology, Shenzhen, China

    person_pinJing GUO, Xi'an Jiaotong University, Xi'an, China
    17:00 - 17:15 | Studying grain growth and densification during sintering with a discrete element modelBrayan Marcelo PAREDES GOYES, Univ. Grenoble Alpes, CNRS, Grenoble INP, SIMaP, Grenoble, France
    David JAUFFRES, Univ. Grenoble Alpes, CNRS, Grenoble INP, SIMaP, Grenoble, France
    Jean-Michel MISSIAEN, Univ. Grenoble Alpes, CNRS, Grenoble INP, SIMaP, Grenoble, France
    Christophe L. MARTIN, Univ. Grenoble Alpes, CNRS, Grenoble INP, SIMaP, Grenoble, France

    person_pinDavid JAUFFRES, Univ. Grenoble Alpes, CNRS, Grenoble INP, SIMaP, Grenoble, France
    17:15 - 17:30 | Discrete Element Simulation of two-step sintering of alumina nano-powdersBrayan PAREDES-GOYES, SIMaP/CNRS, Grenoble, France
    Aatreya Manjulagiri VENKATESH, SIMaP/CNRS, Grenoble, France
    David JAUFFRES, SIMaP/CNRS, Grenoble, France
    Christophe MARTIN, SIMaP/CNRS, Grenoble, France

    person_pinChristophe MARTIN, SIMaP/CNRS, Grenoble, France
    17:30 - 17:45 | Stronger and tougher nanosized dense ceria-doped tetragonal zirconia polycrystals by sinter-HIPRuoshi ZHAO, Tsinghua University, Beijing, China
    Xintong LIU, Tsinghua University, Beijing, China
    Hezhen LI, Tsinghua University, Beijing, China
    Lu SONG, Tsinghua University, Beijing, China
    Jing MA, Tsinghua University, Beijing, China

    person_pinRuoshi ZHAO, Tsinghua University, Beijing, China
    HL16:30 - 17:00 | Processing and properties of robocasted alumina-based ceramic matrix compositesRohit MALIK, Imperial College London, London, United Kingdom
    Shitong ZHOU, Imperial College London, London, United Kingdom
    Eduardo SAIZ GUTIERREZ, Imperial College London, London, United Kingdom

    person_pinRohit MALIK, Imperial College London, London, United Kingdom
    17:00 - 17:15 | Additive manufacturing of short fiber all-oxide ceramic matrix composite: Process analysis and material propertiesJonas STILLER, TU Chemnitz - Institute of Lightweight Structures, Chemnitz, Germany
    Daisy NESTLER, TU Chemnitz - Institute of Lightweight Structures, Chemnitz, Germany
    Kristina RODER, TU Chemnitz - Institute of Lightweight Structures, Chemnitz, Germany
    Andrea PREUSS, TU Chemnitz - Institute of Lightweight Structures, Chemnitz, Germany
    Stefan UHLMANN, Fraunhofer Institute for Machine Tools and Forming Technology, Chemnitz, Germany
    Martin KAUSCH, Fraunhofer Institute for Machine Tools and Forming Technology, Chemnitz, Germany
    Lothar KROLL, TU Chemnitz - Institute of Lightweight Structures, Chemnitz, Germany

    person_pinJonas STILLER, TU Chemnitz - Institute of Lightweight Structures, Chemnitz, Germany
    17:15 - 17:30 | Fabrication of ceramic composites by using combined 3D printing methodsAnna WIECLAW-MIDOR, Warsaw University of Technology, Faculty of Chemistry, Warsaw, Poland
    Joanna TANSKA, Warsaw University of Technology, Faculty of Chemistry, Warsaw, Poland
    Piotr WIECINSKI , Warsaw University of Technology, Faculty of Chemistry, Warsaw, Poland
    Pawel FALKOWSKI, Warsaw University of Technology, Faculty of Chemistry, Warsaw, Poland
    Paulina WIECINSKA, Warsaw University of Technology, Faculty of Chemistry, Warsaw, Poland

    person_pinAnna WIECLAW-MIDOR, Warsaw University of Technology, Faculty of Chemistry, Warsaw, Poland
    17:30 - 17:45 | Al2O3 based ceramic matrix composites using thermoplastic material extrusion additive manufacturing  Amir HADIAN, Empa, Dübendorf, Switzerland
    Jannis DUCKEK,
    Thomas NOEL, Hochschule Koblenz, Hoehr-Grenzhausen, Germany
    Frank CLEMENS, Empa, Dübendorf, Switzerland
    Gurdial BLUGAN, Empa, Dübendorf, Switzerland

    person_pinGurdial BLUGAN, Empa, Dübendorf, Switzerland
    HL16:30 - 17:00 | Tough, strong and damage-tolerant zirconia ceramics with tailored grain boundaryFei ZHANG,
    Maoyin LI, KU Leuven, Department of Materials Engineering, Heverlee, Belgium
    Bart VAN MEERBEEK, KU Leuven, Department of Oral Health Sciences, Leuven, Belgium
    Jef VLEUGELS , KU Leuven, Department of Materials Engineering, Heverlee, Belgium

    person_pinFei ZHANG, KU Leuven, Department of Materials Engineering, Heverlee, Belgium; KU Leuven, Department of Oral Health Sciences, Leuven, Belgium
    17:00 - 17:15 | Stabilizing zirconia without yttria with comparable propertiesAditya ARUN, IIT Patna, Patna, India
    Annu Kumar LAKSHYA, IIT Patna, Patna, India
    Lakshaman KUMAR, IIT Patna, Patna, India
    Anirban CHOWDHURY, IIT Patna, Patna, India

    person_pinAnirban CHOWDHURY, IIT Patna, Patna, India
    17:15 - 17:30 | Aging resistance of a 1.5 mol.% yttria doped zirconia exhibiting optimized toughness and strengthMohamed IMARIOUANE, Université Mohammed V de Rabat, EMI, Avenue Ibn Sina, 10000 Rabat, Morocco, Rabat, Morocco
    Malika SAÂDAOUI, Université Mohammed V de Rabat, EMI, Avenue Ibn Sina, 10000 Rabat, Morocco, Rabat, Morocco
    Helen REVERON, Université de Lyon, INSA de Lyon, MATEIS CNRS UMR5510, 20 Avenue Albert Einstein, F-69621 Villeurbanne Cedex, France, Lyon, France
    Jérôme CHEVALIER, Université de Lyon, INSA de Lyon, MATEIS CNRS UMR5510, 20 Avenue Albert Einstein, F-69621 Villeurbanne Cedex, France, Lyon, France

    person_pinMohamed IMARIOUANE, Université Mohammed V de Rabat, EMI, Avenue Ibn Sina, 10000 Rabat, Morocco, Rabat, Morocco
    17:30 - 17:45 | Industrial production of ready to press ZTA and influence of yttria stabilized zirconia on the composite’s performanceJoanna SZYMANSKA, Imerys Villach GmbH - Dpt. Imerys Technology Center Austria, Villach, Austria
    Teresa REY WÓJCIK, Imerys Villach GmbH - Dpt. Imerys Technology Center Austria, Villach, Austria
    Paul PETSCHNIG, Imerys Villach GmbH - Dpt. Imerys Technology Center Austria, Villach, Austria
    Veronika MÜLLER, Imerys Villach GmbH - Dpt. Imerys Technology Center Austria, Villach, Austria
    Daniela JOSCHAK-ARRICH, Imerys Villach GmbH - Dpt. Imerys Technology Center Austria, Villach, Austria
    Michele PAVONE, Imerys Villach GmbH - Dpt. Imerys Technology Center Austria, Villach, Austria
    Sarah GRIESSER, Imerys Villach GmbH - Dpt. Imerys Technology Center Austria, Villach, Austria
    Angelika PRIESE, Imerys Murg GmbH, Laufenburg, Germany

    person_pinJoanna SZYMANSKA, Imerys Villach GmbH - Dpt. Imerys Technology Center Austria, Villach, Austria
    17:45 - 18:00 | A multiscale characterization of tetragonal zirconia reinforced with 2D nanomaterialsCarmen MUÑOZ-FERREIRO,
    Helen REVERON, Univ. Lyon, CNRS, INSA Lyon, UCBL, MATEIS, UMR5510, 69621, Villeurbanne, France
    Jérôme CHEVALIER, Univ. Lyon, CNRS, INSA Lyon, UCBL, MATEIS, UMR5510, 69621, Villeurbanne, France
    Ana MORALES-RODRÍGUEZ, Universidad de Sevilla, Departamento de Física de la Materia Condensada, ICMS (CSIC – Universidad de Sevilla) Apdo. 1065, 41080, Sevilla, Spain
    Rosalía POYATO, Instituto de Ciencia de Materiales de Sevilla, ICMS, CSIC-Universidad de Sevilla, Avda. Américo Vespucio 49. 41092, Sevilla, Spain
    Ángela GALLARDO-LÓPEZ, Universidad de Sevilla, Departamento de Física de la Materia Condensada, ICMS (CSIC – Universidad de Sevilla) Apdo. 1065, 41080, Sevilla, Spain

    person_pinCarmen MUÑOZ-FERREIRO, Universidad de Sevilla, Departamento de Física de la Materia Condensada, ICMS (CSIC – Universidad de Sevilla) Apdo. 1065, 41080, Sevilla, Spain; Univ. Lyon, CNRS, INSA Lyon, UCBL, MATEIS, UMR5510, 69621, Villeurbanne, France; Instituto de Ciencia de Materiales de Sevilla, ICMS, CSIC-Universidad de Sevilla, Avda. Américo Vespucio 49. 41092, Sevilla, Spain
    18:00 - 18:15 | Design and optimization of a transformation-toughened nacre-like compositeFrancesco AIELLO, Eindhoven University of Technology, Eindhoven, Netherlands
    Jian ZHANG, Eindhoven University of Technology, Eindhoven, Netherlands
    Mauro SALAZAR, Eindhoven University of Technology, Eindhoven, Netherlands
    Diletta GIUNTINI, Eindhoven University of Technology, Eindhoven, Netherlands

    person_pinFrancesco AIELLO, Eindhoven University of Technology, Eindhoven, Netherlands
    18:15 - 18:30 | Zirconia-based materials subjected to rapid impact tests  Zbigniew PEDZICH, AGH University of Science and Technology , Krakow, Poland
    Agnieszka WOJTECZKO, AGH University of Science and Technology , Krakow, Poland
    Marek GRABOWY, Institute of Power Engineering Ceramic Division CEREL, Warsaw, Boguchwala, Poland
    Stanislaw CUDZILO, Military University of Technology, Warsaw, Poland

    person_pinZbigniew PEDZICH, AGH University of Science and Technology , Krakow, Poland
    HL16:30 - 17:00 | A novel spherical alumina as “cracker stopper” for alumina spinel refractory castablesHong PENG, Elkem Silicon Products Development, Kristiansand S, Norway
    Tianbin ZHU, Wuhan University of Science and Technology , HuBei, China
    Yawei LI, Wuhan University of Science and Technology , HuBei, China

    person_pinHong PENG, Elkem Silicon Products Development, Kristiansand S, Norway
    17:00 - 17:15 | Insights on the development of novel eco-friendly electrofused synthetic raw materialsOtavio Henrique BORGES,
    Francisco Gil COURY, Federal University of São Carlos, Graduate Program in Materials Science and Engineering, São Carlos, Brazil
    Dereck Nills Ferreira MUCHE,
    Victor Carlos PANDOLFELLI,

    person_pinOtavio Henrique BORGES, Federal University of São Carlos, Graduate Program in Materials Science and Engineering, São Carlos, Brazil; Materials Microstructure Engineering Group (GEMM), a FIRE Associate Laboratory, São Carlos, Brazil
    17:15 - 17:30 | Extrusion-based 3D printed alumina for refractory applicationTilo ZIENERT, Technical University Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Dirk ENDLER, Technical University Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Jana HUBÁLKOVÁ, Technical University Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Christos G. ANEZIRIS, Technical University Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany

    person_pinTilo ZIENERT, Technical University Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    17:30 - 17:45 | PREFORMED Al2O3-MgO-ZnO COMPLEX SPINELS ADDITIONS IN HIGH ALUMINA C-FREE BRICKSJose Alvaro PREVIATO SARDELLI,
    Otávio Henrique BORGES, Federal University of São Carlos, São Carlos - SP, Brazil
    Carlos PAGLIOSA NETO, RHI Magnesita, Contagem - MG, Brazil
    Victor Carlos PANDOLFELLI, Federal University of São Carlos, São Carlos - SP, Brazil

    person_pinJose Alvaro PREVIATO SARDELLI, RHI Magnesita, Contagem - MG, Brazil; Federal University of São Carlos, São Carlos - SP, Brazil
    17:45 - 18:00 | Electrospun fibers with embedded graphene as reinforcement in recycled carbon-bonded alumina refractoriesEnrico STORTI, TU Bergakademie Freiberg, Freiberg, Germany
    Serhii YAROSHEVSKYI, TU Bergakademie Freiberg, Freiberg, Germany
    Ondrej JANKOVSKÝ, University of Chemistry and Technology, Prague, Czechia
    Christos G. ANEZIRIS, TU Bergakademie Freiberg, Freiberg, Germany

    person_pinEnrico STORTI, TU Bergakademie Freiberg, Freiberg, Germany
    18:00 - 18:15 | MAX Phase Synthesis and Evaluation in RefractoriesAlexander LEITNER, RHI Magnesita, Leoben, Austria
    Stefan HEID, RHI Magnesita, Leoben, Austria
    Daniela GAVAGNIN, RHI Magnesita, Leoben, Austria
    Lukasz PYTLAK, RHI Magnesita, Leoben, Austria
    Harald HARMUTH, Montanuniversität Leoben, Leoben, Austria

    person_pinLukasz PYTLAK, RHI Magnesita, Leoben, Austria
    HL16:30 - 17:00 | Nanostructured ceramics via self-assembly and spark plasma sintering: Tuning mechanical and magnetic behaviorDiletta GIUNTINI, Eindhoven University of Technology, Eindhoven, Netherlands

    person_pinDiletta GIUNTINI, Eindhoven University of Technology, Eindhoven, Netherlands
    17:00 - 17:15 | Grain size-driven effects on the functional properties in Ba 0.6 Sr 0.4 TiO 3 ceramics consolidated by spark plasma sinteringRoxana PATRU, National Institute for Materials Physics, Atomistilor 405A, Magurele, Romania
    Catalina STANCIU,
    Mirabela SOARE,
    Adrian SURDU, Polytechnics University of Bucharest, Faculty of Chemical Engineering and Biotechnologies, Department Oxide Materials Science and Engineering, Bucharest, Romania
    Roxana TRUSCA, Polytechnics University of Bucharest, Faculty of Chemical Engineering and Biotechnologies, Department Oxide Materials Science and Engineering, Bucharest, Romania
    Adrian NICOARA, Polytechnics University of Bucharest, Faculty of Chemical Engineering and Biotechnologies, Department Oxide Materials Science and Engineering, Bucharest, Romania
    Bogdan VASILE, Polytechnics University of Bucharest, Faculty of Chemical Engineering and Biotechnologies, Department Oxide Materials Science and Engineering, Bucharest, Romania
    Georgia BONI, National Institute for Materials Physics, Atomistilor 405A, Magurele, Romania
    Luminita AMARANDEI, National Institute for Materials Physics, Atomistilor 405A, Magurele, Romania
    Nadejda HORCHIDAN, Faculty of Physics, Alexandru Ioan Cuza University of Iasi, Iasi, Romania
    Lavinia CURECHERIU, Faculty of Physics, Alexandru Ioan Cuza University of Iasi, Iasi, Romania
    Liliana MITOSERIU, Faculty of Physics, Alexandru Ioan Cuza University of Iasi, Iasi, Romania
    Lucian PINTILIE, National Institute for Materials Physics, Atomistilor 405A, Magurele, Romania
    Ioana PINTILIE, National Institute for Materials Physics, Atomistilor 405A, Magurele, Romania
    Adelina IANCULESCU, Polytechnics University of Bucharest, Faculty of Chemical Engineering and Biotechnologies, Department Oxide Materials Science and Engineering, Bucharest, Romania

    person_pinAdelina IANCULESCU, Polytechnics University of Bucharest, Faculty of Chemical Engineering and Biotechnologies, Department Oxide Materials Science and Engineering, Bucharest, Romania
    17:15 - 17:30 | Dependence of structure and microstructure of spark plasma sintered KNN-Li/Ta ceramics on ferroelectric and piezoelectric propertiDamien BRAULT, GREMAN UMR 7347, Tours, France
    Fabien GIOVANNELLI, GREMAN UMR 7347, Tours, France
    Claire BANTIGNIES, Vermon S.A., Tours, France
    Franck LEVASSORT, GREMAN UMR 7347, Tours, France
    Isabelle MONOT-LAFFEZ, GREMAN UMR 7347, Tours, France

    person_pinDamien BRAULT, GREMAN UMR 7347, Tours, France
    17:30 - 17:45 | H2 Sensing Characteristics of Pt-BaTiO3 Prepared by Spark Plasma SinteringJon G. BELL, Empa, High Performance Ceramics Laboratory, Dübendorf, Switzerland
    Shangxiong HUANGFU, Empa, High Performance Ceramics Laboratory, Dübendorf, Switzerland
    Luca ARTIGLIA, PSI, Villigen, Switzerland
    Michael STUER, Empa, High Performance Ceramics Laboratory, Dübendorf, Switzerland

    person_pinMichael STUER, Empa, High Performance Ceramics Laboratory, Dübendorf, Switzerland
    17:45 - 18:00 | Exploring metacomposites properties in Ag-BaTiO3 by tuning the microstructuresIna TURCAN, Dielectrics, Ferroelectrics & Multiferroics Group, Faculty of Physics, Alexandru Ioan Cuza University of Iasi, 700506 Iasi, Romania, Iasi, Romania
    Leontin PADURARIU, Dielectrics, Ferroelectrics & Multiferroics Group, Faculty of Physics, Alexandru Ioan Cuza University of Iasi, 700506 Iasi, Romania, Iasi, Romania
    Cristina Elena CIOMAGA, Department of Exact & Natural Sciences, Institute of Interdisciplinary Research, Al. I. Cuza University of Iasi, 700506 Iasi, Romania, Iasi, Romania
    Lavinia CURECHERIU, Dielectrics, Ferroelectrics & Multiferroics Group, Faculty of Physics, Alexandru Ioan Cuza University of Iasi, 700506 Iasi, Romania, Iasi, Romania
    Liliana MITOSERIU, Dielectrics, Ferroelectrics & Multiferroics Group, Faculty of Physics, Alexandru Ioan Cuza University of Iasi, 700506 Iasi, Romania, Iasi, Romania
    Donatella GIURANNO, Institute of Condensed Matter Chemistry & Technologies for Energy, National Research Council of Italy, Via De Marini 6, 16149 Genoa, Italy, Genoa, Italy

    person_pinLiliana MITOSERIU, Dielectrics, Ferroelectrics & Multiferroics Group, Faculty of Physics, Alexandru Ioan Cuza University of Iasi, 700506 Iasi, Romania, Iasi, Romania
    18:00 - 18:15 | Mechanochemical synthesis and properties of magnetostrictive spinel (Mg, Zn)Fe2O4 for biocompatible magnetoelectric compositesCristina PASCUAL-GONZÁLEZ, ICMM-CSIC, Madrid, Spain
    Harvey AMORÍN, ICMM-CSIC, Madrid, Spain
    Alicia CASTRO, ICMM-CSIC, Madrid, Spain
    Miguel ALGUERÓ, ICMM-CSIC, Madrid, Spain

    person_pinCristina PASCUAL-GONZÁLEZ, ICMM-CSIC, Madrid, Spain
    16:30 - 16:45 | New ceramic media for Concentrated Solar Power (CSP) PlantsNassira BENAMEUR, Saint-Gobain Research Provence, Cavaillon, France
    Samuel MARLIN, Saint-Gobain Research Provence, Cavaillon, France

    person_pinNassira BENAMEUR, Saint-Gobain Research Provence, Cavaillon, France
    16:45 - 17:00 | Sintered lanthanum hexaboride ceramics for thermal-thermionic solar absorberElisa SANI, National Institute of Optics, National Research Council (CNR-INO) , Firenze, Italy
    Diletta SCITI, Institute of Science, Technology and Sustainability for Ceramics (CNR-ISSMC), Faenza, Italy
    Simone FAILLA, Institute of Science, Technology and Sustainability for Ceramics (CNR-ISSMC), Faenza, Italy
    Alessandro BELLUCCI, Institute of Structure of Matter (CNR-ISM), Montelibretti, Italy
    Matteo MASTELLONE, Institute of Structure of Matter (CNR-ISM), Montelibretti, Italy
    Stefano ORLANDO, Institute of Structure of Matter (CNR-ISM), Tito Scalo, Italy
    Daniele M. TRUCCHI, Institute of Structure of Matter (CNR-ISM), Montelibretti, Italy

    person_pinElisa SANI, National Institute of Optics, National Research Council (CNR-INO) , Firenze, Italy
    17:00 - 17:15 | SOLAR ABSORBERS BASED ON MIXTURES OF ALUMINA AND CERAMIC PIGMENTSM-Magdalena LORENTE-AYZA, Instituto de Tecnología Cerámica (ITC). Asociación de Investigación de las Industrias Cerámicas (AICE), Castellón, Spain
    Javier GARCÍA-TEN, Instituto de Tecnología Cerámica (ITC). Asociación de Investigación de las Industrias Cerámicas (AICE), Castellón, Spain
    Eva MIGUEL, Instituto de Tecnología Cerámica (ITC). Asociación de Investigación de las Industrias Cerámicas (AICE), Castellón, Spain
    Jose PLANELLES-ARAGÓ, Instituto de Tecnología Cerámica (ITC). Asociación de Investigación de las Industrias Cerámicas (AICE), Castellón, Spain
    Inmaculada CAÑADAS, CIEMAT - Plataforma Solar de Almería, Tabernas, Spain
    Diego MARTÍNEZ, CIEMAT - Plataforma Solar de Almería, Tabernas, Spain
    Jose RODRIGUEZ-GARCÍA, CIEMAT - Plataforma Solar de Almería, Tabernas, Spain

    person_pinM-Magdalena LORENTE-AYZA, Instituto de Tecnología Cerámica (ITC). Asociación de Investigación de las Industrias Cerámicas (AICE), Castellón, Spain
    17:15 - 17:30 | Super Stable and Superhydrophobic Perovskite Solar Cell - One Step Closer to IndustryNiusha HESHMATI, Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne, Köln, Germany
    Anna SCHMIDT-VERMA, Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne, Köln, Germany
    Razan MARWAN AL-ESSEILI, German Jordanian University, School of Basic Sciences and Humanities, Amman, Jordan
    Ruth ADAM, Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne, Köln, Germany
    Sanjay MATHUR, Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne, Köln, Germany

    person_pinNiusha HESHMATI, Institute of Inorganic Chemistry, Department of Chemistry, University of Cologne, Köln, Germany
    17:30 - 17:45 | Highly efficient 3D printed thermal energy storage materialsIrene DÍAZ-HERREZUELO, Institute of Ceramics and Glass (ICV-CSIC), Kelsen 5, 28049, Madrid, Spain
    Luis MORENO-SANABRIA, Institute of Ceramics and Glass (ICV-CSIC), Kelsen 5, 28049, Madrid, Spain
    Pilar MIRANZO, Institute of Ceramics and Glass (ICV-CSIC), Kelsen 5, 28049, Madrid, Spain
    María Isabel OSENDI, Institute of Ceramics and Glass (ICV-CSIC), Kelsen 5, 28049, Madrid, Spain
    Manuel BELMONTE, Institute of Ceramics and Glass (ICV-CSIC), Kelsen 5, 28049, Madrid, Spain

    person_pinIrene DÍAZ-HERREZUELO, Institute of Ceramics and Glass (ICV-CSIC), Kelsen 5, 28049, Madrid, Spain
    17:45 - 18:00 | Performance of Ca1-xSrxMnO3-δ-foams and-granules in Thermochemical Oxygen Pumping  Mathias PEIN,
    Christos AGRAFIOTIS, German Aerospace Center (DLR), Cologne, Germany
    Martin ROEB, German Aerospace Center (DLR), Cologne, Germany
    Christian SATTLER,

    person_pinMathias PEIN, German Aerospace Center (DLR), Cologne, Germany; RWTH Aachen University, Professorship for Solar Fuel Production, Aachen, Germany
    K16:30 - 17:00 | The role of powder selection and microstructure homogeneity to mechanical properties of zirconia toughened alumina compositesFrank KERN, University of Stuttgart - IFKB, Stuttgart, Germany

    person_pinFrank KERN, University of Stuttgart - IFKB, Stuttgart, Germany
    17:00 - 17:15 | How to improve ATZ ceramics for the use of highly loaded implants?Karen HANS, Mathys Orthopaedie GmbH, Moersdorf, Germany
    Daniel SCHUMACHER, Fraunhofer IKTS, Hermsdorf, Germany
    Martin LIEBELT, Mathys Orthopaedie GmbH, Moersdorf, Germany
    Sabine BEGAND, Fraunhofer IKTS, Hermsdorf, Germany
    Thomas OBERBACH, Mathys Orthopaedie GmbH, Moersdorf, Germany

    person_pinKaren HANS, Mathys Orthopaedie GmbH, Moersdorf, Germany
    17:15 - 17:30 | Long-term stability of tetragonal zirconia polycrystalsWei-Hsing TUAN, National Taiwan University, Taipei, Taiwan
    Yung-Shin CHENG, National Taiwan University, Taipei, Taiwan
    Che-Lun TUNG, National Taiwan University, Taipei, Taiwan
    Yu-Xin CHEN, National Taiwan University, Taipei, Taiwan
    Jin-Ren CHEN, Chang Gung Memorial Hospital at Linkou, Taoyuan, Taiwan
    Po-Liang LAI, Chang Gung Memorial Hospital at Linkou, Taoyuan, Taiwan

    person_pinWei-Hsing TUAN, National Taiwan University, Taipei, Taiwan
    17:30 - 17:45 | Direct Laser Interference Patterning of zirconia (3Y-TZP)Bruno HENRIQUES,
    Bogdan VOISIAT, Institute for Manufacturing Technology, Technische Universität Dresden, George-Baehr-Str.3c, 01069 Dresden, Germany, Dresden, Germany
    Douglas FABRIS, Ceramic and Composite Materials Research Group (CERMAT), Federal University of Santa Catarina (UFSC), 88040-900, Florianopolis, SC, Brazil, Florianópolis, Brazil
    Laurent GREMILLARD, Univ Lyon, CNRS, INSA Lyon, UCBL, MATEIS, UMR5510, 69100 Villeurbanne, France, Lyon, France
    Ar BOCCACCINI, Institute of Biomaterials, University of Erlangen-Nuremberg, 91058 Erlangen, Germany, Erlangen, Germany
    Af LASAGNI, Institute for Manufacturing Technology, Technische Universität Dresden, George-Baehr-Str.3c, 01069 Dresden, Germany, Dresden, Germany

    person_pinBruno HENRIQUES, Ceramic and Composite Materials Research Group (CERMAT), Federal University of Santa Catarina (UFSC), 88040-900, Florianopolis, SC, Brazil, Florianópolis, Brazil; Institute for Manufacturing Technology, Technische Universität Dresden, George-Baehr-Str.3c, 01069 Dresden, Germany, Dresden, Germany; Center for Micro-Electro Mechanical Systems (CMEMS-UMinho), University of Minho, Campus de Azurém, 4800-058 Guimarães, Portugal, Guimarães, Portugal
    17:45 - 18:00 | Nanometric-sized zirconia: a new paradigm for the best compromise between translucency, mechanical properties and aging resistanceErica ROITERO, Institut National des Sciences Appliquées (INSA), Lyon, France
    Helen REVERON, Institut National des Sciences Appliquées (INSA), Lyon, France
    Laurent GREMILLARD, Institut National des Sciences Appliquées (INSA), Lyon, France
    Vincent GARNIER, Institut National des Sciences Appliquées (INSA), Lyon, France
    Christian RITZBERGER, Ivoclar, Schaan, Liechtenstein
    Jérôme CHEVALIER, Institut National des Sciences Appliquées (INSA), Lyon, France

    person_pinErica ROITERO, Institut National des Sciences Appliquées (INSA), Lyon, France
    18:00 - 18:15 | Physicochemical and microstructural evolutions of titanium-ceramic joints during brazing of biomedical implantsAnne-Laure CÉNAC LAHON DEBAT, SCT, Bazet, France
    Jérôme CHEVALIER, Univ Lyon, INSA Lyon, UCBL, MATEIS UMR CNRS 5510, Villeurbanne, F-69621, France
    Laurent GREMILLARD, Univ Lyon, INSA Lyon, UCBL, MATEIS UMR CNRS 5510, Villeurbanne, F-69621, France
    Philippe STEYER, Univ Lyon, INSA Lyon, UCBL, MATEIS UMR CNRS 5510, Villeurbanne, F-69621, France
    Thierry DOUILLARD, Univ Lyon, INSA Lyon, UCBL, MATEIS UMR CNRS 5510, Villeurbanne, F-69621, France
    Bérangère LE SAINT, Univ Lyon, INSA Lyon, UCBL, MATEIS UMR CNRS 5510, Villeurbanne, F-69621, France
    My-Thu TRAN, SCT, Bazet, France
    Jean-Baptiste FRUHAUF, SCT, Bazet, France

    person_pinAnne-Laure CÉNAC LAHON DEBAT, SCT, Bazet, France
    18:15 - 18:30 | Patient-specific Voronoi tessellation-based ceramic scaffold in load-bearing defects Mansoureh REZAPOURIAN, Mechanical and Industrial Engineering Department, Tallinn University of Technology, Tallinn, Estonia, Estonia
    Ali CHELOEE DARABI, Institute for Materials Testing, Materials Science and Strength of Materials, University of Stuttgart, 70569 Stuttgart, Germany, Germany
    Siegfried SCHMAUDER, Institute for Materials Testing, Materials Science and Strength of Materials, University of Stuttgart, 70569 Stuttgart, Germany, Germany
    Irina HUSSAINOVA, Mechanical and Industrial Engineering Department, Tallinn University of Technology, Tallinn, Estonia, Estonia

    person_pinMansoureh REZAPOURIAN, Mechanical and Industrial Engineering Department, Tallinn University of Technology, Tallinn, Estonia, Estonia
    HL16:30 - 17:00 | Microstructural study and multiphysics investigation of hemihydrate-earth material strengthening applied to sustainable constructionSamuel MEULENYZER, Holcim Innovation Center, 95 rue du Montmurier, Saint Quentin Fallavier
    Samuel MEULENYZER,
    Elodie PRUDHOMME, Holcim Innovation Center, 95 rue du Montmurier, Saint Quentin Fallavier
    Yves JORAND, Université de Lyon, INSA-Lyon, CNRS, MATEIS UMR5510, Villeurbanne, FRANCE
    Laurent GREMILLARD, Université de Lyon, INSA-Lyon, CNRS, MATEIS UMR5510, Villeurbanne, FRANCE

    person_pinSamuel MEULENYZER, Holcim Innovation Center, 95 rue du Montmurier, Saint Quentin Fallavier
    Samuel MEULENYZER, Holcim Innovation Center, 95 rue du Montmurier, Saint Quentin Fallavier; Université de Lyon, INSA-Lyon, CNRS, MATEIS UMR5510, Villeurbanne, FRANCE
    17:00 - 17:15 | Effect of exposure to high temperature on the performances of compressed earth blocks stabilized with cementitious binders  Philbert NSHIMIYIMANA, Laboratoire Eco-Matériaux et Habitats Durables (LEMHaD), Institut International d’Ingénierie de l’Eau et de l’Environnement (Institut 2iE), Ouagadougou, Burkina Faso
    Kader Banaou DJIBO , Laboratoire Eco-Matériaux et Habitats Durables (LEMHaD), Institut International d’Ingénierie de l’Eau et de l’Environnement (Institut 2iE), Ouagadougou, Burkina Faso
    Seick Omar SORE ,
    Yacouba COULIBALY , Laboratoire Eco-Matériaux et Habitats Durables (LEMHaD), Institut International d’Ingénierie de l’Eau et de l’Environnement (Institut 2iE), Ouagadougou, Burkina Faso
    Adamah MESSAN, Laboratoire Eco-Matériaux et Habitats Durables (LEMHaD), Institut International d’Ingénierie de l’Eau et de l’Environnement (Institut 2iE), Ouagadougou, Burkina Faso
    Luc COURARD , Urban and Environmental Engineering (UEE), Université de Liège (ULiege), Liège, Belgium

    person_pinPhilbert NSHIMIYIMANA, Laboratoire Eco-Matériaux et Habitats Durables (LEMHaD), Institut International d’Ingénierie de l’Eau et de l’Environnement (Institut 2iE), Ouagadougou, Burkina Faso
    17:15 - 17:30 | Characterization of the transition zone between vegetal compounds and cement pasteElodie PRUD'HOMME, MATEIS - INSA Lyon, Villeurbanne, France
    Fabien DELHOMME, GEOMAS - INSA Lyon, Villeurbanne, France
    Flavie DIELBOT,
    Loïc CORVALAN,
    Sofiane AMZIANE, Institut Pascal - Université Clermont Auvergne, Clermont-Ferrand, France
    Evelyne TOUSSAINT, Institut Pascal - Université Clermont Auvergne, Clermont-Ferrand, France
    Sandrine MARCEAU, CPDM - Université Gustave Eiffel, Marne-la-Vallée, France

    person_pinElodie PRUD'HOMME, MATEIS - INSA Lyon, Villeurbanne, France
    17:30 - 17:45 | Synthesis of lightweight and low thermal conductivity inorganic polymer compositesRui NOVAIS, Department of Materials and Ceramic Engineering / CICECO-Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    Zélia ALVES, Department of Materials and Ceramic Engineering / CICECO-Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    Luciano SENFF, Mobility Engineering Center, Federal University of Santa Catarina, Joinville, Brazil
    João LABRINCHA, Department of Materials and Ceramic Engineering / CICECO-Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal

    person_pinRui NOVAIS, Department of Materials and Ceramic Engineering / CICECO-Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    17:45 - 18:00 | Microstructure of insulation and superinsulation characterized with X-ray tomography and simulation of thermal conductivitiesJustine PAPILLON, MATEIS, INSA-Lyon, Villeurbanne, France
    Jerome ADRIEN, MATEIS, INSA-Lyon, Villeurbanne, France
    Genevieve FORAY, MATEIS, INSA-Lyon, Villeurbanne, France

    person_pinGenevieve FORAY, MATEIS, INSA-Lyon, Villeurbanne, France
    18:00 - 18:15 | Improving the flexural behavior of fiber reinforced concrete by fibers with a special surface textureDevid FALLIANO, Politecnico di Torino, Turin, Italy
    Giovanni ANGLANI, Politecnico di Torino, Turin, Italy
    Luciana RESTUCCIA, Politecnico di Torino, Turin, Italy
    Paola ANTONACI, Politecnico di Torino, Turin, Italy
    Giuseppe Andrea FERRO, Politecnico di Torino, Turin, Italy

    person_pinDevid FALLIANO, Politecnico di Torino, Turin, Italy
    18:15 - 18:30 | Effect of exposure to high temperature on the physical and microstructural properties of metakaolin based geopolymerYawo Daniel ADUFU, Laboratoire Eco-Matériaux et Habitats Durables (LEMHaD), Institut International d’Ingénierie de l’Eau et de l’Environnement (Institut 2iE), Ouagadougou, Burkina Faso
    Seick Omar SORE, Département Génie Civil de l’Institut Universitaire de Technologie / Laboratoire de Chimie et Energies Renouvelables (LaCER), Unité de Recherche en Physico Chimie et Technologie des Matériaux, Université Nazi BONI, Ouagadougou, Burkina Faso
    Philbert NSHIMIYIMANA, Laboratoire Eco-Matériaux et Habitats Durables (LEMHaD), Institut International d’Ingénierie de l’Eau et de l’Environnement (Institut 2iE), Ouagadougou, Burkina Faso
    Adamah MESSAN, Laboratoire Eco-Matériaux et Habitats Durables (LEMHaD), Institut International d’Ingénierie de l’Eau et de l’Environnement (Institut 2iE), Ouagadougou, Burkina Faso
    Gilles ESCADEILLAS, LMDC-INSA, Université de Toulouse ; UPS, INSA ; Laboratoire Matériaux et Durabilité des Constructions , Toulouse, France

    person_pinPhilbert NSHIMIYIMANA, Laboratoire Eco-Matériaux et Habitats Durables (LEMHaD), Institut International d’Ingénierie de l’Eau et de l’Environnement (Institut 2iE), Ouagadougou, Burkina Faso
    HL16:30 - 17:00 | In situ tests in X Ray tomography applied to ceramics, a reviewEric MAIRE, Laboratoire MateIS. INSA LYON CNRS., Villeurbanne, France
    Jerome ADRIEN, Laboratoire MateIS. INSA LYON CNRS., Villeurbanne, France
    Joel LACHAMBRE,
    Justine PAPILLON, Laboratoire MateIS. INSA LYON CNRS., Villeurbanne, France

    person_pinEric MAIRE, Laboratoire MateIS. INSA LYON CNRS., Villeurbanne, France
    17:00 - 17:15 | Deformation mechanism of cerium oxide nanocubes - an in situ transmission electron microscopy study  Lucile JOLY-POTTUZ, INSA Lyon - MATEIS, Villeurbanne, France
    Rongrong ZHANG, INSA Lyon - MATEIS, Villeurbanne, France
    Gaetan LAURENS, UCB Lyon 1 - ILM, Villeurbanne, France
    Tristan ALBARET, UCB Lyon 1 - ILM, Villeurbanne, France
    Karine MASENELLI-VARLOT, INSA Lyon - MATEIS, Villeurbanne, France

    person_pinLucile JOLY-POTTUZ, INSA Lyon - MATEIS, Villeurbanne, France
    17:15 - 17:30 | Accessing the grain boundary network evolution, proof of principle, and application to high T and high P deformation.Katharina MARQUARDT, Imperial College London, London, United Kingdom

    person_pinKatharina MARQUARDT, Imperial College London, London, United Kingdom
    17:30 - 17:45 | In situ High Temperature X-Ray Laue microdiffraction of Polycrsytalline Zirconia undergoing a Phase TransitionRavi Raj Purohit PURUSHOTTAM RAJ PUROHIT, Univ. Grenoble Alpes, CEA, IRIG, MEM, Grenoble, France
    Jean-Sébastien MICHA,
    Stéphan ARNAUD, Institut Néel (UPR CNRS 2940), Université Grenoble Alpes, Grenoble, France
    Daniel FOWAN, IRCER (UMR CNRS 7315), Université de Limoges, Limoges, France
    Nils BLANC, Institut Néel (UPR CNRS 2940), Université Grenoble Alpes, Grenoble, France
    Olivier CASTELNAU, PIMM (UMR CNRS 8006), CNRS, ENSAM, Cnam, HESAM, Paris, France
    René GUINEBRETIÈRE, IRCER (UMR CNRS 7315), Université de Limoges, Limoges, France

    person_pinJean-Sébastien MICHA, Univ. Grenoble Alpes, CNRS, CEA, IRIG, SyMMES,, Grenoble, France; Univ. Grenoble Alpes, CEA, IRIG, MEM, Grenoble, France
    17:45 - 18:00 | In-situ XRD measurements of ceramic materialsBenedikt SCHRODE, Anton Paar GmbH, Graz, Austria
    Andrew O. F. JONES, Anton Paar GmbH, Graz, Austria
    Marius KREMER, Anton Paar GmbH, Graz, Austria
    Barbara PUHR, Anton Paar GmbH, Graz, Austria
    Praveen VIR, Anton Paar GmbH, Graz, Austria

    person_pinBenedikt SCHRODE, Anton Paar GmbH, Graz, Austria
    Andrew O. F. JONES, Anton Paar GmbH, Graz, Austria
    HL16:30 - 17:00 | Bioactive glasses with enhanced biological activity by metal ion doping    Aldo BOCCACCINI, University of Erlangen-Nuremberg, Germany, Erlangen, Germany

    person_pinAldo BOCCACCINI, University of Erlangen-Nuremberg, Germany, Erlangen, Germany
    17:00 - 17:15 | Mesoporous Cu-Sr/Mg calcium-silicate glass and its potential for acute/chronic infection healingDagmar GALUSKOVÁ, Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín , Trenčín, Slovakia
    Hana KANKOVÁ, Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín , Trenčín, Slovakia
    Lenka BUNOVÁ, Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín , Trenčín, Slovakia
    Akrity ANAND, Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín , Trenčín, Slovakia
    Zuzana NESCÁKOVÁ, Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín , Trenčín, Slovakia
    Aldo Roberto BOCCACCINI, Institute of Biomaterials, University of Erlangen-Nuremberg, Erlangen, Germany
    DušAn GALUSEK,

    person_pinDagmar GALUSKOVÁ, Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín , Trenčín, Slovakia
    17:15 - 17:30 | Boron and Cobalt co-doped silicate-based bioactive glass scaffolds fabrication via DLP: Optimization of the printing parametersE. VARLIK,
    S. NARAYANASAMY, Laboratory for High Performance Ceramics, Empa, Swiss Federal Laboratories for Materials Science and Technology, 8600, Dübendorf, Switzerland
    F. CLEMENS, Laboratory for High Performance Ceramics, Empa, Swiss Federal Laboratories for Materials Science and Technology, 8600, Dübendorf, Switzerland
    A. HADIAN, Laboratory for High Performance Ceramics, Empa, Swiss Federal Laboratories for Materials Science and Technology, 8600, Dübendorf, Switzerland
    D. KOMISSARENKO, Laboratory for High Performance Ceramics, Empa, Swiss Federal Laboratories for Materials Science and Technology, 8600, Dübendorf, Switzerland
    N. S. YÜZBASI, Laboratory for High Performance Ceramics, Empa, Swiss Federal Laboratories for Materials Science and Technology, 8600, Dübendorf, Switzerland
    F. KURTULDU, Centre for Functional and Surface Functionalized Glass FunGlass, A. Dubček University of Trenčín, Študentská 2, 911 50, Trenčín, Slovakia
    S. CHEN, Centre for Functional and Surface Functionalized Glass FunGlass, A. Dubček University of Trenčín, Študentská 2, 911 50, Trenčín, Slovakia
    D. GALUSEK,
    G. BLUGAN, Laboratory for High Performance Ceramics, Empa, Swiss Federal Laboratories for Materials Science and Technology, 8600, Dübendorf, Switzerland
    M. MICHÁLEK, Laboratory for High Performance Ceramics, Empa, Swiss Federal Laboratories for Materials Science and Technology, 8600, Dübendorf, Switzerland

    person_pinE. VARLIK, Centre for Functional and Surface Functionalized Glass FunGlass, A. Dubček University of Trenčín, Študentská 2, 911 50, Trenčín, Slovakia; Laboratory for High Performance Ceramics, Empa, Swiss Federal Laboratories for Materials Science and Technology, 8600, Dübendorf, Switzerland
    17:30 - 17:45 | Dynamic test as a method of choice for determination of the burst release of Zn from zinc doped bioactive glassesHana KANKOVÁ, Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Trenčín, Slovakia
    Lenka BUNOVÁ, Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Trenčín, Slovakia
    Zuzana NESCÁKOVÁ, Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Trenčín, Slovakia
    Martin MICHÁLEK, Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Trenčín, Slovakia
    DušAn GALUSEK,
    Dagmar GALUSKOVÁ, Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Trenčín, Slovakia

    person_pinHana KANKOVÁ, Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Trenčín, Slovakia
    17:45 - 18:00 | Development and Characterisation of Radiopaque Bismuth Containing Bioactive Glasses Germán CLAVIJO, Centre for Functional and Surface Functionalized Glass FunGlass, A. Dubček University of Trenčín, Študentská 2, 911 50 Trenčín, Slovakia, Trenčín, Slovakia
    Martin MICHÁLEK, Centre for Functional and Surface Functionalized Glass FunGlass, A. Dubček University of Trenčín, Študentská 2, 911 50 Trenčín, Slovakia, Trenčín, Slovakia
    DušAn GALUSEK ,
    Irem ÜNALAN, Institute of Biomaterials, Department of Material Science and Engineering, University of Erlangen-Nuremberg, 91058 Erlangen, Germany, Erlangen , Germany
    Aldo BOCCACCINI , Institute of Biomaterials, Department of Material Science and Engineering, University of Erlangen-Nuremberg, 91058 Erlangen, Germany, Erlangen , Germany

    person_pinGermán CLAVIJO, Centre for Functional and Surface Functionalized Glass FunGlass, A. Dubček University of Trenčín, Študentská 2, 911 50 Trenčín, Slovakia, Trenčín, Slovakia

    calendar_today THU. 06/07

    K08:30 - 09:00 | Electrospun ceramic nanofibers with specific functionalitiesGideon GRADER, Technion - Chemical Engineering Department, Haifa, Israel

    person_pinGideon GRADER, Technion - Chemical Engineering Department, Haifa, Israel
    09:00 - 09:15 | Elucidation of the cause of defect formation in bulk ceramics by three-dimensional observation methodSatoshi TANAKA, Nagaoka University of Technology, Nagaoka, Japan

    person_pinSatoshi TANAKA, Nagaoka University of Technology, Nagaoka, Japan
    09:15 - 09:30 | Yttria-stabilized zirconia synthesized under supercritical conditions: a new building block for low-temperature sintering processYoan DENIS, ICMCB, Bordeaux, France
    Matthew SUCHOMEL, ICMCB, Bordeaux, France
    Graziella GOGLIO, ICMCB, Bordeaux, France
    Claude ESTOURNÈS, CIRIMAT, Toulouse, France
    Thomas HÉRISSON DE BEAUVOIR, CIRIMAT, Toulouse, France
    Julien DE LANDTSHEER, CIRIMAT, Toulouse, France
    Jérôme CHEVALIER, MATEIS, Lyon, France
    Helen REVERON, MATEIS, Lyon, France
    Catherine ELISSALDE, ICMCB, Bordeaux, France
    Gilles PHILIPPOT, ICMCB, Bordeaux, France

    person_pinYoan DENIS, ICMCB, Bordeaux, France
    09:30 - 09:45 | New insights in the hydro-solvothermal sintering of ZnO and SiO2: from modelling to mechanisms and energeticsSylvie BORDERE, CNRS, University of Bordeaux, Arts et Métiers Institute of Technology, Bordeaux INP, INRAE, I2M Bordeaux, UMR 5295, Talence, France
    Lucas VILLATTE, University of Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, Pessac, France
    Dominique BERNARD, University of Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, Pessac, France
    Philippe LEGROS, Placamat, UMS 3626, Pessac, France
    Pierre CARLES, IRCER, UMR 7315, Centre européen de la Céramique , Limoges, France
    Alain LARGETEAU, University of Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, Pessac, France
    Graziella GOGLIO, University of Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, Pessac, France
    Catherine ELISSALDE, University of Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026, Pessac, France

    person_pinSylvie BORDERE, CNRS, University of Bordeaux, Arts et Métiers Institute of Technology, Bordeaux INP, INRAE, I2M Bordeaux, UMR 5295, Talence, France
    09:45 - 10:00 | Thermal and chemical stability of Pb doped ceria nanopowdersBranko MATOVIC, Vinča Institute of Nuclear Sciences - National Institute of thе Republic of Serbia, University of Belgrade, Belgrade, Serbia

    person_pinBranko MATOVIC, Vinča Institute of Nuclear Sciences - National Institute of thе Republic of Serbia, University of Belgrade, Belgrade, Serbia
    10:00 - 10:15 | High temperature resistant hydrophobic coatingsMaria CARUSO, ISSMC-CNR, Ravenna, Italy
    Alessandro COROZZI, ISSMC-CNR, Ravenna, Italy
    Guia GUARINI, ISSMC-CNR, Ravenna, Italy
    Mariarosa RAIMONDO, ISSMC-CNR, Ravenna, Italy

    person_pinMaria CARUSO, ISSMC-CNR, Ravenna, Italy
    10:15 - 10:30 | Different joining techniques to create complex alumina ceramic shapes at relatively low temperaturesMaria STOSZ, Empa - Swiss Federal Laboratories for Material Science and Technology, Dübendorf, Switzerland
    Sathya NARAYANASAMY, Empa - Swiss Federal Laboratories for Material Science and Technology, Dübendorf, Switzerland
    Gurdial BLUGAN, Empa - Swiss Federal Laboratories for Material Science and Technology, Dübendorf, Switzerland

    person_pinMaria STOSZ, Empa - Swiss Federal Laboratories for Material Science and Technology, Dübendorf, Switzerland
    K08:30 - 09:00 | Microwave sintering of alumina-based abrasives by direct heating in dynamic mode: from lab prototype to pilot unitFlorent POLGE, Imerys Villach GmbH, Dpt. Imerys Technology Center Austria, Villach, Austria
    Sanel HARBAS, Imerys Villach GmbH, Dpt. Imerys Technology Center Austria, Villach, Austria
    Andreas BÖRGER, Imerys Villach GmbH, Dpt. Imerys Technology Center Austria, Villach, Austria
    Beatriz GARCÍA BAÑOS, Instituto de Aplicaciones de las Tecnologías de la Información y de las Comunicaciones Avanzadas (ITACA), Universitat Politècnica de València, Valencia, Spain
    Angel LOPEZ BUENDIA, INNCEINNMAT SL, Valencia, Spain

    person_pinFlorent POLGE, Imerys Villach GmbH, Dpt. Imerys Technology Center Austria, Villach, Austria
    09:00 - 09:15 | Microwave sintering of zirconia and zirconia-toughened alumina – Influence of the content and type of dopants of zirconiaNouhaila KHALILE , Mines Saint-Etienne, Univ Lyon, CNRS, UMR 5307 LGF, F-42023 Saint-Etienne France , SAINT-ETIENNE, France
    Clémence PETIT, Mines Saint-Etienne, Univ Lyon, CNRS, UMR 5307 LGF, F-42023 Saint-Etienne France , SAINT-ETIENNE, France
    Christophe MEUNIER, Mines Saint-Etienne, Univ Lyon, CNRS, UMR 5307 LGF, F-42023 Saint-Etienne France , SAINT-ETIENNE, France
    François VALDIVIESO, Mines Saint-Etienne, Univ Lyon, CNRS, UMR 5307 LGF, F-42023 Saint-Etienne France , SAINT-ETIENNE, France

    person_pinClémence PETIT, Mines Saint-Etienne, Univ Lyon, CNRS, UMR 5307 LGF, F-42023 Saint-Etienne France , SAINT-ETIENNE, France
    09:15 - 09:30 | Manufacturing of Al2O3f/Al2O3 ceramic matrix composites by microwave assisted chemical vapour infiltrationZhongmin LI, School of Metallurgy and Materials, University of Birmingham, Birmingham, B15 2SE, Birmingham, United Kingdom
    Jon BINNER , School of Metallurgy and Materials, University of Birmingham, Birmingham, B15 2SE, Birmingham, United Kingdom
    Giuseppe ANNINO, Istituto per i Processi Chimico-Fisici, IPCF-CNR, Via G. Moruzzi 1, 56124 , Pisa, Italy
    Andrea CINTIO, Istituto per i Processi Chimico-Fisici, IPCF-CNR, Via G. Moruzzi 1, 56124 , Pisa, Italy

    person_pinZhongmin LI, School of Metallurgy and Materials, University of Birmingham, Birmingham, B15 2SE, Birmingham, United Kingdom
    09:30 - 09:45 | Flash sintering of ZrB2: obstacles and solutions towards the production of highly performant ultrarefractory ceramicsEmanuele DE BONA, University of Trento, Trento, Italy
    Isacco MAZO, University of Trento, Trento, Italy
    Vincenzo M. SGLAVO, University of Trento, Trento, Italy

    person_pinEmanuele DE BONA, University of Trento, Trento, Italy
    09:45 - 10:00 | Electrochemical reduction and phase development during DC flash sintering of YSZChristian BECHTELER, University of Oxford, Department of Materials, Oxford, United Kingdom
    Richard TODD, University of Oxford, Department of Materials, Oxford, United Kingdom

    person_pinChristian BECHTELER, University of Oxford, Department of Materials, Oxford, United Kingdom
    10:00 - 10:15 | Multi-Phase Flash Sintering  Pedro SANCHEZ JIMENEZ, Institute of Materials Science of Seville - CSIC, Sevilla, Spain
    Sandra MOLINA, Institute of Materials Science of Seville - CSIC, Sevilla, Spain
    Antonio PEREJON, Institute of Materials Science of Seville - CSIC, Sevilla, Spain
    Luis PÉREZ MAQUEDA, Institute of Materials Science of Seville - CSIC, Sevilla, Spain

    person_pinPedro SANCHEZ JIMENEZ, Institute of Materials Science of Seville - CSIC, Sevilla, Spain
    K08:30 - 09:00 | 3D Printing Bioinspired Ceramics from Preceramic PolymersHamidreza YAZDANI SARVESTANI, National Research Council Canada, Montreal, Canada
    Alexander SHASHOUA, National Research Council Canada, Montreal, Canada
    Ahmad SOHRABI KASHANI, National Research Council Canada, Montreal, Canada
    Tom LACELLE, National Research Council Canada, Ottawa, Canada
    Michael JAKUBINEK, National Research Council Canada, Ottawa, Canada
    Chantal PAQUET, National Research Council Canada, Ottawa, Canada
    Behnam ASHRAFI, National Research Council Canada, Montreal, Canada

    person_pinBehnam ASHRAFI, National Research Council Canada, Montreal, Canada
    09:00 - 09:15 | Robocasting of Bi-Component Ceramic InksFelipe MELLO RIGON, Karlsruhe Institute of Technology, Karlsruhe, Germany
    Norbert WILLENBACHER, Karlsruhe Institute of Technology, Karlsruhe, Germany

    person_pinFelipe MELLO RIGON, Karlsruhe Institute of Technology, Karlsruhe, Germany
    09:15 - 09:30 | Characterization of FFF 3D printed zirconia parts for medical applicationsDaniel VIDAL, UNIVERSITAT POLITÈCNICA DE CATALUNYA (UPC), BARCELONA, Spain
    Irene BUJ-CORRAL, UNIVERSITAT POLITÈCNICA DE CATALUNYA (UPC), BARCELONA, Spain

    person_pinDaniel VIDAL, UNIVERSITAT POLITÈCNICA DE CATALUNYA (UPC), BARCELONA, Spain
    09:30 - 09:45 | Additive manufacturing of CMCs by DIW of preceramic polymersFilippo DA RIN BETTA, Università degli studi di Padova, Padova, Italy
    Ryan SEABRIGHT, Qinetiq, Farnbourgh, United Kingdom
    Charles FOOTER, Qinetiq, Farnbourgh, United Kingdom
    Giorgia FRANCHIN, Università degli studi di Padova, Padova, Italy
    Paolo COLOMBO, Università degli studi di Padova, Padova, Italy

    person_pinFilippo DA RIN BETTA, Università degli studi di Padova, Padova, Italy
    09:45 - 10:00 | TPMS additive manufacturing: The effect of porosity design on mechanical propertiesIslam BOUAKAZ,
    David GROSSIN, CIRIMAT , Toulouse, France
    Gregory NOLENS, CERHUM, Liége, Belgium

    person_pinIslam BOUAKAZ, CERHUM, Liége, Belgium; CIRIMAT , Toulouse, France
    10:00 - 10:15 | Hierarchical porous calcium carbonate parts produced by vat-photopolymerization with the use of pore formersMateus MOTA MORAIS,
    Hamada ELSAYED,
    Carlos Alberto FORTULAN, São Carlos School of Engineering, University of São Paulo, São Carlos, Brazil
    Paolo COLOMBO,

    person_pinMateus MOTA MORAIS, Department of Industrial Engineering, University of Padova, Padova, Italy; São Carlos School of Engineering, University of São Paulo, São Carlos, Brazil
    10:15 - 10:30 | From freeze-casting method to 3D printing technology: Fe2O3 scaffolds for Green hydrogen productionPedro Javier LLOREDA-JURADO, Instituto de Ciencia de Materiales de Sevilla (CSIC-Univ. Sevilla), Avda. Américo Vespucio 49, 41092 , Seville, Spain
    Krishnakumar BALU, Departamento de Ingeniería y Ciencia de los Materiales y del Transporte, E.T.S. de Ingenieros, Universidad de Sevilla, Seville, Spain
    Miguel Antonio BAUTISTA, Departamento de Ingeniería y Ciencia de los Materiales y del Transporte, E.T.S. de Ingenieros, Universidad de Sevilla, Seville, Spain
    Jesús HERNANDEZ-SAZ, Departamento de Ingeniería y Ciencia de los Materiales y del Transporte, E.T.S. de Ingenieros, Universidad de Sevilla, Seville, Spain
    Antonio PAÚL, Departamento de Ingeniería y Ciencia de los Materiales y del Transporte, E.T.S. de Ingenieros, Universidad de Sevilla, Seville, Spain
    Ernesto CHICARDI, Departamento de Ingeniería y Ciencia de los Materiales y del Transporte, E.T.S. de Ingenieros, Universidad de Sevilla, Seville, Spain
    Ranier SEPULVEDA, Departamento de Ingeniería y Ciencia de los Materiales y del Transporte, E.T.S. de Ingenieros, Universidad de Sevilla, Seville, Spain

    person_pinRanier SEPULVEDA, Departamento de Ingeniería y Ciencia de los Materiales y del Transporte, E.T.S. de Ingenieros, Universidad de Sevilla, Seville, Spain
    HL08:30 - 09:00 | Microscale Plasticity in Amorphous Aluminum Oxide at Room Temperature and Under Fast Impact Loading  Erkka J. FRANKBERG,
    Aloshious LAMBAI, Tampere University, Tampere, Finland
    Jiahui ZHANG,
    Janne KALIKKA, Tampere University, Tampere, Finland
    Sergei KHAKALO, VTT Technical Research Centre of Finland Ltd., Espoo, Finland
    Boris PALADINO, Istituto Italiano di Tecnologia, Milano, Italy
    Mattia CABRIOLI, Istituto Italiano di Tecnologia, Milano, Italy
    Turkka SALMINEN, Tampere University, Tampere, Finland
    Mikko HOKKA, Tampere University, Tampere, Finland
    Jaakko AKOLA, Norwegian University of Science and Technology, Trondheim, Norway
    Antti KURONEN, University of Helsinki, Helsinki, Finland
    Erkki LEVÄNEN, Tampere University, Tampere, Finland
    Fabio DI FONZO, Istituto Italiano di Tecnologia, Milano, Italy
    Gaurav MOHANTY, Tampere University, Tampere, Finland

    person_pinErkka J. FRANKBERG, Tampere University, Tampere, Finland; Istituto Italiano di Tecnologia, Milano, Italy
    09:00 - 09:15 | Creep of ceramic-organic supercrystalline nanocompositesCong YAN, Eindhoven University of Technology, Eindhoven, Netherlands
    Büsra BOR, Hamburg University of Technology, Hamburg, Germany
    Alexander PLUNKETT, Hamburg University of Technology, Hamburg, Germany
    Berta DOMÈNECH, Hamburg University of Technology, Hamburg, Germany
    Gerold SCHNEIDER, Hamburg University of Technology, Hamburg, Germany
    Marc GEERS, Eindhoven University of Technology, Eindhoven, Netherlands
    Diletta GIUNTINI, Eindhoven University of Technology, Eindhoven, Netherlands

    person_pinCong YAN, Eindhoven University of Technology, Eindhoven, Netherlands
    09:15 - 09:30 | Multiscale testing and modeling of ?red clay bricks: from microscopic morphometry to macroscopic stiffness and conductivityMarkus KÖNIGSBERGER, TU Wien, Wien, Austria
    Thomas BUCHNER, TU Wien, Wien, Austria
    Thomas KIEFER, TU Wien, Wien, Austria
    Josef FÜSSL, TU Wien, Wien, Austria

    person_pinMarkus KÖNIGSBERGER, TU Wien, Wien, Austria
    09:30 - 09:45 | Effects of microstructure on the compressive behavior of multiscale porous alumina manufactured by gel-casting.Quentin HENRY, I2M/DuMas, Bordeaux, France

    person_pinQuentin HENRY, I2M/DuMas, Bordeaux, France
    09:45 - 10:00 | Laser-induced direct metallization of alumina based oxide ceramic substratesPhilipp NINZ, University of Stuttgart - Institute for manufacturing technologies of ceramic components and composites (IFKB), Stuttgart, Germany
    Alexander SCHILLING , University of Stuttgart - Institute for Micro Integration (IFM), Stuttgart, Germany
    Simon KELLER, University of Stuttgart - Institute for manufacturing technologies of ceramic components and composites (IFKB), Stuttgart, Germany
    Sascha WESER, Hahn-Schickard, Stuttgart, Germany

    person_pinPhilipp NINZ, University of Stuttgart - Institute for manufacturing technologies of ceramic components and composites (IFKB), Stuttgart, Germany
    K08:30 - 09:00 | The novel refractory ceramic eraVictor Carlos PANDOLFELLI, Federal University of São Carlos, São Carlos, Brazil

    person_pinVictor Carlos PANDOLFELLI, Federal University of São Carlos, São Carlos, Brazil
    09:00 - 09:15 | FORECASTING NEW HORIZONSFOR THE REFRACTORY RESEARCH AND EDUCATIONMichel RIGAUD, Ecole Polytechnique, Montréal, Canada
    Jacques POIRIER, CEMHTI-CNRS / University of Orleans, Orleans, France

    person_pinMichel RIGAUD, Ecole Polytechnique, Montréal, Canada
    09:15 - 09:30 | ATHOR and CESAREF EU Projects: Direct impacts on international refractory community and coming contribution to European Green DealMarc HUGER, IRCER - UMR CNRS 7315, Limoges, France

    person_pinMarc HUGER, IRCER - UMR CNRS 7315, Limoges, France
    09:30 - 09:45 | High entropy ceramic–metal composites prepared by Spark Plasma SinteringDaniel VALASEK, Central European Institute of Technology, Brno University of Technology, Brno, Czechia
    David SALAMON, Central European Institute of Technology, Brno University of Technology, Brno, Czechia

    person_pinDaniel VALASEK, Central European Institute of Technology, Brno University of Technology, Brno, Czechia
    09:45 - 10:00 | Theoretical predictions and synthesis of (Ti-Zr-Hf-Nb-Ta)B2 structures with non-equimolar compositionsInga ZHUKOVA, Slovak Academy of Science, Bratislava, Slovakia
    Vasanthakumar KOMBAMUTHU, Slovak Academy of Science, Bratislava, Slovakia
    Monika TATARKOVÁ, Slovak Academy of Science, Bratislava, Slovakia
    Dejan ZAGORAC, Slovak Academy of Science, Bratislava, Slovakia
    Alexandra KOVALCÍKOVÁ, Slovak Academy of Science, Bratislava, Slovakia
    Tamás CSANÁDI, Slovak Academy of Science, Bratislava, Slovakia
    Ivo DLOUHÝ, Slovak Academy of Science, Bratislava, Slovakia
    Branko MATOVIC, Slovak Academy of Science, Bratislava, Slovakia
    Ján DUSZA, Slovak Academy of Science, Bratislava, Slovakia
    Peter TATARKO, Slovak Academy of Science, Bratislava, Slovakia

    person_pinInga ZHUKOVA, Slovak Academy of Science, Bratislava, Slovakia
    10:00 - 10:15 | Anisotropic plasticity and strength enhancement in high-entropy carbide grains during micropillar compressionTamás CSANÁDI, Institute of Materials Research, Slovak Academy of Sciences, Košice, Slovakia

    person_pinTamás CSANÁDI, Institute of Materials Research, Slovak Academy of Sciences, Košice, Slovakia
    K08:30 - 09:00 | Structure and dynamics of ferroelectric domain walls down to the atomic levelAndreja BENCAN,
    Oana CONDURACHE,
    Katarina ŽIBERNA,
    Goran DRAŽIC, Department of Materials Chemistry, National Institute of Chemistry, Ljubljana, Slovenia

    person_pinAndreja BENCAN, Electronic Ceramics Department, Jozef Stefan Institute, Ljubljana, Slovenia; Jozef Stefan International Postgraduate School, Ljubljana, Slovenia
    09:00 - 09:15 | Piezoelectric hardening in Na1/2Bi1/2TiO3-based materials due to poling-induced textureJürgen RÖDEL, TU Darmstadt, Darmstadt, Germany
    Laura CANGINI, TU Darmstadt, Darmstadt, Germany
    Andreas WOHNINSLAND, TU Darmstadt, Darmstadt, Germany
    Daniel BREMECKER, TU Darmstadt, Darmstadt, Germany
    Lovro FULANOVIC, TU Darmstadt, Darmstadt, Germany
    Changhao ZHAO, TU Darmstadt, Darmstadt, Germany

    person_pinJürgen RÖDEL, TU Darmstadt, Darmstadt, Germany
    09:15 - 09:30 | Mechanical probing of ferroelectric bulk materials using nanoscale techniquesKatarina ŽIBERNA,
    Micka BAH, GREMAN, Université de Tours, CRNS, Tours, France
    Franck LEVASSORT, GREMAN, Université de Tours, CRNS, Tours, France
    Aljaž DRNOVŠEK, Department of Thin Films and Surfaces, Jožef Stefan Institute, Ljubljana, Slovenia
    Goran DRAŽIC,
    Hana URŠIC,
    Andreja BENCAN,

    person_pinKatarina ŽIBERNA, Electronic Ceramics Department, Jožef Stefan Institute, Ljubljana, Slovenia; Jožef Stefan International Postgraduate School, Ljubljana, Slovenia
    09:30 - 09:45 | Fatigue endurance of BZ and BCZ doped KNN-based piezoelectric ceramicsBrenda CARREÑO JIMÉNEZ,
    Rigoberto LÓPEZ JUÁREZ, Unidad Morelia del Instituto de Investigaciones en Materiales, Universidad Nacional Autónoma de México, Morelia, Mexico
    Mónica ACUAUTLA, Engineering and Technology Institute Groningen (ENTEG), Faculty of Science and Engineering, University of Groningen, Groningen, Netherlands

    person_pinBrenda CARREÑO JIMÉNEZ, Engineering and Technology Institute Groningen (ENTEG), Faculty of Science and Engineering, University of Groningen, Groningen, Netherlands; Unidad Morelia del Instituto de Investigaciones en Materiales, Universidad Nacional Autónoma de México, Morelia, Mexico
    09:45 - 10:00 | Effect of temperature on ferroelastic creep behavior of LaCoO3Rodrigo ARENAS , Universidad de Chile, Santiago, Chile
    Iglesias BASTIÁN , Universidad de Chile, Santiago, Chile
    Ali AKBARI-FAKHRABADI, Universidad de Chile, Santiago, Chile

    person_pinAli AKBARI-FAKHRABADI, Universidad de Chile, Santiago, Chile
    10:00 - 10:15 | Thermally annealed MgSZ-MgO eutectics: phase segregation and mechanical properties  Patricia Beatriz OLIETE, Instituto de Nanociencia y Materiales de Aragón (Universidad de Zaragoza-CSIC), Zaragoza, Spain
    Rosa Isabel MERINO, Instituto de Nanociencia y Materiales de Aragón (Universidad de Zaragoza-CSIC), Zaragoza, Spain
    José Ignacio PEÑA, Instituto de Nanociencia y Materiales de Aragón (Universidad de Zaragoza-CSIC), Zaragoza, Spain
    María Luisa SANJUÁN, Instituto de Nanociencia y Materiales de Aragón (Universidad de Zaragoza-CSIC), Zaragoza, Spain

    person_pinMaría Luisa SANJUÁN, Instituto de Nanociencia y Materiales de Aragón (Universidad de Zaragoza-CSIC), Zaragoza, Spain
    HL08:30 - 09:00 | The Oxygen and Proton Kinetics of BCFZY Triple Conducting Electrode Materials for Protonic Ceramic Fuel CellsKyle BRINKMAN, Clemson University, Clemson, United States

    person_pinKyle BRINKMAN, Clemson University, Clemson, United States
    09:00 - 09:15 | Additive manufacturing of proton conducting ceramic nanocomposite fuel cellsMuhammad Imran ASGHAR, Aalto University, Espoo, Finland

    person_pinMuhammad Imran ASGHAR, Aalto University, Espoo, Finland
    09:15 - 09:30 | Tensile strength of ultra-thin 3YSZ ceramic foils for solid oxide cellsIlaria BOMBARDA, University of Bayreuth, Bayreuth, Germany
    Carolin SITZMANN, University of Bayreuth, Bayreuth, Germany
    Nico LANGHOF, University of Bayreuth, Bayreuth, Germany
    Stefan SCHAFFÖNER, University of Bayreuth, Bayreuth, Germany

    person_pinIlaria BOMBARDA, University of Bayreuth, Bayreuth, Germany
    09:30 - 09:45 | 8YCSZ/rGO composites for components in SOFC: Microstructure and electrical conductivity  Rosalía POYATO, Instituto de Ciencia de Materiales de Sevilla (ICMS) CSIC – Universidad de Sevilla, Avda. Américo Vespucio 49, 41092 Sevilla, Spain, Seville, Spain
    Francisco Javier COTO,
    A. DE LA CRUZ-BLANCO,
    Rocío MORICHE, Dpto. Física de la Materia Condensada, Universidad de Sevilla. Avd. Reina Mercedes s/n, 41080 Sevilla, Spain, Seville, Spain
    Cristina LÓPEZ-PERNÍA, Dpto. Física de la Materia Condensada, Universidad de Sevilla. Avd. Reina Mercedes s/n, 41080 Sevilla, Spain, Seville, Spain
    Ana MORALES-RODRÍGUEZ, Dpto. Física de la Materia Condensada, Universidad de Sevilla. Avd. Reina Mercedes s/n, 41080 Sevilla, Spain, Seville, Spain
    Ángela GALLARDO-LÓPEZ, Dpto. Física de la Materia Condensada, Universidad de Sevilla. Avd. Reina Mercedes s/n, 41080 Sevilla, Spain, Seville, Spain

    person_pinRosalía POYATO, Instituto de Ciencia de Materiales de Sevilla (ICMS) CSIC – Universidad de Sevilla, Avda. Américo Vespucio 49, 41092 Sevilla, Spain, Seville, Spain
    09:45 - 10:00 | Innovative based-ceria cells for SOFC and SOEC applicationsElise BONNET, CNRS, ICMCB, Pessac, France
    Jean-Marc BASSAT, CNRS, ICMCB, Pessac, France
    Jean-Claude GRENIER, CNRS, ICMCB, Pessac, France
    Thierry CHARTIER, CNRS, IRCER, Limoges, France
    Pierre-Marie GEFFROY, CNRS, IRCER, Limoges, France

    person_pinElise BONNET, CNRS, ICMCB, Pessac, France
    10:00 - 10:15 | NMC cathode materials: effect of processing parameters on their functional propertiesSvitlana NAHIRNIAK, Institute of Materials Research, German Aerospace Center (DLR), Köln, Germany
    Emre GUNEY, ENWAIR Energy Technologies Corporation, Istanbul, Turkey
    Neha SAINI, Institute of Materials Research, German Aerospace Center (DLR), Köln, Germany
    Roussin LONTIO FOMEKONG, Laboratory of Material Chemistry, Higher Teacher Training College, University of Yaounde, Yaounde, Cameroon
    Neslihan YUCA, ENWAIR Energy Technologies Corporation, Istanbul, Turkey
    Bilge SARUHAN, Institute of Materials Research, German Aerospace Center (DLR), Köln, Germany

    person_pinSvitlana NAHIRNIAK, Institute of Materials Research, German Aerospace Center (DLR), Köln, Germany
    HL08:30 - 09:00 | High thermoelectric performance of textured Ca3Co4-xO9-δ ceramics via electrospun nanoribbonsKruppa KRUPPA, Leibniz University Hannover, Hannover, Germany
    Itzhak MAOR, Technion – Israel Institute of Technology, Haifa, Israel
    Frank STEINBACH, Leibniz University Hannover, Hannover, Germany
    Meirav MANN-LAHAV, Technion – Israel Institute of Technology, Haifa, Israel
    Gideon GRADER, Technion – Israel Institute of Technology, Haifa, Israel
    Armin FELDHOFF, Leibniz University Hannover, Hannover, Germany

    person_pinArmin FELDHOFF, Leibniz University Hannover, Hannover, Germany
    09:00 - 09:15 | High-temperature Thermoelectric Performance of Highly Conductive Tungsten-based Magnéli Phase Oxide W18O49Michitaka OHTAKI, Kyushu University, Fukuoka, Japan
    Quang Minh Nhat TRAN, Kyushu University, Fukuoka, Japan
    Koichiro SUEKUNI, Kyushu University, Fukuoka, Japan

    person_pinMichitaka OHTAKI, Kyushu University, Fukuoka, Japan
    09:15 - 09:30 | Enhancing the thermoelectric efficiency of ceramics by decoupling of their thermal and electrical propertiesJesús PRADO-GONJAL, Universidad Complutense de Madrid, Madrid, Spain
    Marina TABUYO-MARTÍNEZ, Universidad Complutense de Madrid, Madrid, Spain
    Paz VAQUEIRO, University of Reading, Reading, United Kingdom
    Anthony POWELL, University of Reading, Reading, United Kingdom
    Óscar J. DURÁ, Universidad de Castilla La Mancha, Ciudad Real, Spain

    person_pinJesús PRADO-GONJAL, Universidad Complutense de Madrid, Madrid, Spain
    09:30 - 09:45 | Effect of Conductive TiC 3D-Network Structure on the Thermoelectric Properties of SiCKartal ARSLAN, Eskişehir Technical University, Eskişehir, Turkey
    Salih Cagri OZER, Eskişehir Technical University, Eskişehir, Turkey
    Servet TURAN, Eskişehir Technical University, Eskişehir, Turkey

    person_pinSalih Cagri OZER, Eskişehir Technical University, Eskişehir, Turkey
    09:45 - 10:00 | Improved Thermoelectric Properties of B4C with in-situ TiB2 Segregated Network StructuresSalih Cagri OZER, Eskisehir Technical University, Eskisehir, Turkey
    Kartal ARSLAN, Eskisehir Technical University, Eskisehir, Turkey
    Servet TURAN,

    person_pinSalih Cagri OZER, Eskisehir Technical University, Eskisehir, Turkey
    10:00 - 10:15 | In-Situ Synthesis of Sub-Stoichiometric Titanium Dioxide for Spray-Formed Thermoelectric GeneratorsEdward J GILDERSLEEVE V, Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research, Materials Synthesis and Processing (IEK-1), Jülich, Germany
    Robert VAßEN, Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research, Materials Synthesis and Processing (IEK-1), Jülich, Germany

    person_pinEdward J GILDERSLEEVE V, Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research, Materials Synthesis and Processing (IEK-1), Jülich, Germany
    10:15 - 10:30 | P-type thermoelectric oxides for low-power transverse thermoelectric generators (TTEGs)Ahmed IBRAHIM, Ernst-Abbe-Hochscule Jena - University of Applied Sciences, Jena, Germany
    Arne BOCHMANN, Ernst-Abbe-Hochscule Jena - University of Applied Sciences, Jena, Germany
    Romy LÖHNERT, Ernst-Abbe-Hochscule Jena - University of Applied Sciences, Jena, Germany
    Jörg TÖPFER, Ernst-Abbe-Hochscule Jena - University of Applied Sciences, Jena, Germany

    person_pinAhmed IBRAHIM, Ernst-Abbe-Hochscule Jena - University of Applied Sciences, Jena, Germany
    08:30 - 08:45 | Biocompatible Nanoceramics as Probes for In Vitro Optical ImagingTeresa JARDIEL, Instituto de Cerámica y Vidrio - CSIC, Kelsen 5, Campus de Cantoblanco, 28049, Madrid, Spain
    Marco PEITEADO, Instituto de Cerámica y Vidrio - CSIC, Kelsen 5, Campus de Cantoblanco, 28049, Madrid, Spain
    Vincenzo MIRABELLO, Department of Chemistry, University of Bath, Claverton Down, BA2 7AY, Bath, United Kingdom
    Sofia I. PASCU, Department of Chemistry, University of Bath, Claverton Down, BA2 7AY, Bath, United Kingdom
    Amador C. CABALLERO, Instituto de Cerámica y Vidrio - CSIC, Kelsen 5, Campus de Cantoblanco, 28049, Madrid, Spain
    David G. CALATAYUD,

    person_pinDavid G. CALATAYUD, Department of Inorganic Chemistry, Facultad de Ciencias, Universidad Autónoma de Madrid, Francisco Tomás y Valiente 7, 28049, Madrid, Spain; Instituto de Cerámica y Vidrio - CSIC, Kelsen 5, Campus de Cantoblanco, 28049, Madrid, Spain
    08:45 - 09:00 | Biophotonic glass-based scaffolds for drug releaseSonya GHANAVATI, Faculty of Medicine and Health Technology, Tampere University, Korkeakoulunkatu 3, Tampere, Finland
    Evellyn SANTOS MAGALHAES, Photonics Laboratory, Tampere University, Korkeakoulunkatu 3, Tampere 33720, Finland
    Chi NGUYEN, Photonics Laboratory, Tampere University, Korkeakoulunkatu 3, Tampere 33720, Finland
    Bartosz BONDZIOR,
    Mika LASTUSAARI, Department of Chemistry, University of Turku, FI-20014, Turku, Finland
    Jeffrey N ANKER, Department of Chemistry, Clemson University, Clemson, SC, United States
    Andrew DRAGANSKI , Zylö Therapeutics, Greenville, SC, United States
    Laeticia PETIT, Photonics Laboratory, Tampere University, Korkeakoulunkatu 3, Tampere 33720, Finland
    Jonathan MASSERA, Faculty of Medicine and Health Technology, Tampere University, Korkeakoulunkatu 3, Tampere, Finland

    person_pinSonya GHANAVATI, Faculty of Medicine and Health Technology, Tampere University, Korkeakoulunkatu 3, Tampere, Finland
    09:00 - 09:15 | Tuning bacteria behaviour using piezoelectric ceramic membranesSimone SANTUCCI, Technical University of Denmark, Copenhagen, Denmark
    Bhaskar REDDY SUDIREDDY, Technical University of Denmark, Copenhagen, Denmark

    person_pinSimone SANTUCCI, Technical University of Denmark, Copenhagen, Denmark
    09:15 - 09:30 | Innovative ceramic and glass ceramic-based coatings with silver nanoclusters for air and water filtrationAngelica LUCERI, Politecnico di Torino, Torino, Italy
    Sergio PERERO, Politecnico di Torino, Torino, Italy
    Monica FERRARIS, Politecnico di Torino, Torino, Italy
    Cristina BALAGNA, Politecnico di Torino, Torino, Italy

    person_pinAngelica LUCERI, Politecnico di Torino, Torino, Italy
    09:30 - 09:45 | Ferroelectric BaTiO3 coating of beta-titanium implants – physicochemical properties and in vivo testsPremysl VANEK, Institute of Physics, Czech Academy of Sciences, Prague, Czechia
    Ladislav CVRCEK, Faculty of Mechanical Engineering, Czech Technical University in Prague, Prague, Czechia
    Elena BUIXADERAS, Institute of Physics, Czech Academy of Sciences, Prague, Czechia
    Jan DRAHOKOUPIL, Institute of Physics, Czech Academy of Sciences, Prague, Czechia
    Fedir BORODAVKA, Institute of Physics, Czech Academy of Sciences, Prague, Czechia
    Elena FILOVÁ, Laboratory of Biomaterials and Tissue Engineering, Institute of Physiology of the Czech Academy of Sciences, Prague, Czechia
    Andrej LITVINEC,
    Rastislav BALLAY, 1st Department of Orthopedics, First Faculty of Medicine, Charles University in Prague and Motol University Hospital, Prague, Czechia
    Radka VRBOVÁ, Institute of Dental Medicine, First Faculty of Medicine and General University Hospital, Charles University, Prague, Czechia
    Stefan JUHÁS, Institute of Animal Physiology and Genetics, Czech Academy of Sciences, Liběchov, Czechia
    Jana JUHÁSOVÁ, Institute of Animal Physiology and Genetics, Czech Academy of Sciences, Liběchov, Czechia
    Martin BARTOŠ, Institute of Dental Medicine, First Faculty of Medicine and General University Hospital, Charles University, Prague, Czechia
    Lucie BACÁKOVÁ, Laboratory of Biomaterials and Tissue Engineering, Institute of Physiology of the Czech Academy of Sciences, Prague, Czechia

    person_pinPremysl VANEK, Institute of Physics, Czech Academy of Sciences, Prague, Czechia
    HL08:30 - 09:00 | Overview on the use of cementitious macro-capsules in self-healing systems for building applicationsAnglani GIOVANNI, Politecnico di Torino, Department of Structural, Geotechnical and Building Engineering, Torino, Italy
    Paola ANTONACI, Politecnico di Torino, Department of Structural, Geotechnical and Building Engineering, Torino, Italy
    Jean-Marc TULLIANI, Politecnico di Torino, Department of Applied Science and Technology, INSTM Research Unit PoliTO-LINCE Laboratory, Torino, Italy

    person_pinAnglani GIOVANNI, Politecnico di Torino, Department of Structural, Geotechnical and Building Engineering, Torino, Italy
    09:00 - 09:15 | Multiphysic and multiscale investigation of the setting process of hydraulic binders: the case of gypsumAlexandre FANTOU, Univ Lyon, INSA Lyon, Université Claude Bernard Lyon 1, CNRS, MATEIS, UMR5510, Villeurbanne, France
    Solene TADIER, Univ Lyon, INSA Lyon, Université Claude Bernard Lyon 1, CNRS, MATEIS, UMR5510, Villeurbanne, France
    Sylvain MEILLE, Univ Lyon, INSA Lyon, Université Claude Bernard Lyon 1, CNRS, MATEIS, UMR5510, Villeurbanne, France

    person_pinAlexandre FANTOU, Univ Lyon, INSA Lyon, Université Claude Bernard Lyon 1, CNRS, MATEIS, UMR5510, Villeurbanne, France
    09:15 - 09:30 | Strength development in cement mortars containing ceramic construction and demolition wasteThomas KRONBERG, Åbo Akademi University, Turku, Finland
    Jan-Erik ERIKSSON, Åbo Akademi University, Turku, Finland
    Leena HUPA, Åbo Akademi University, Turku, Finland

    person_pinThomas KRONBERG, Åbo Akademi University, Turku, Finland
    09:30 - 09:45 | Investigation into water demand of calcined clays for cement formulationLucie HALLIER, IRCER (Ceramic Research Institute), Limoges, France
    Youssef EL HAFIANE, IRCER (Ceramic Research Institute), Limoges, France
    Agnès SMITH, IRCER (Ceramic Research Institute), Limoges, France
    David SMITH, IRCER (Ceramic Research Institute), Limoges, France
    Amith KALATHINGAL, Holcim Innovation Center, Saint-Quentin-Fallavier, France
    Rémi BARBARULO, Holcim Innovation Center, Saint-Quentin-Fallavier, France
    Christophe LEVY, Holcim Innovation Center, Saint-Quentin-Fallavier, France

    person_pinLucie HALLIER, IRCER (Ceramic Research Institute), Limoges, France
    09:45 - 10:00 | Extracted brownmillerite from sulfate resisting Portland cement: crystal chemistry and reactivityAlexis MÉRIOT,
    Marie-Noëlle DE NOIRFONTAINE, Laboratoire des Solides Irradiés (LSI) UMR 7642 / CNRS - CEA - Ecole polytechnique, Palaiseau, France
    Laurent IZORET, Syndicat Français de L'industrie Cimentière, Clichy, France
    Mireille COURTIAL,
    Sandrine GAUFFINET, Laboratoire Interdisciplinaire Carnot de Bourgogne, CNRS, Université de Bourgogne Franche-Comté, Dijon, France
    Sandrine TUSSEAU-NENEZ, Laboratoire de Physique de la Matière Condensée, CNRS, Ecole Polytechnique, Institut Polytechnique de Paris, Palaiseau, France
    Sebastien DILIBERTO, Institut Jean Lamour, UMR 7198, CNRS, Université de Lorraine, Metz, France
    Frédéric DUNSTETTER, Laboratoire des Solides Irradiés (LSI) UMR 7642 / CNRS - CEA - Ecole polytechnique, Palaiseau, France

    person_pinAlexis MÉRIOT, Laboratoire des Solides Irradiés (LSI) UMR 7642 / CNRS - CEA - Ecole polytechnique, Palaiseau, France; Syndicat Français de L'industrie Cimentière, Clichy, France
    10:00 - 10:15 | Use of fine fraction of Waste-to-Energy Bottom Ash as aerating agent substitute in aerated concreteManon BROSSAT, Univ Lyon, INSA Lyon, DEEP, EA7429, Villeurbanne, France
    Maria LUPSEA-TOADER, Univ Lyon, INSA Lyon, DEEP, EA7429, Villeurbanne, France
    Elodie PRUD'HOMME, Univ Lyon, INSA Lyon, MATEIS, UMR 5510, Villeurbanne, France
    Denise BLANC, Univ Lyon, INSA Lyon, DEEP, EA7429, Villeurbanne, France
    Christine DE BRAUER, Univ Lyon, INSA Lyon, DEEP, EA7429, Villeurbanne, France

    person_pinManon BROSSAT, Univ Lyon, INSA Lyon, DEEP, EA7429, Villeurbanne, France
    10:15 - 10:30 | Characterization and stability of synthesized mixed Al/Fe AFm phasesAurore LECHEVALLIER,
    Guillaume RENAUDIN,
    Mohend CHAOUCHE,
    Jérôme SOUDIER,
    Evelyne PRAT, Sika, Zürich, Switzerland

    person_pinAurore LECHEVALLIER, ParexGroup, St Quentin Fallavier, France; Université Clermont Auvergne, Clermont Auvergne INP, Clermont-Ferrand, France; Université Paris-Saclay, Gif-sur-Yvette, France
    HL08:30 - 09:00 | Utilizing Magnetometry to Track the State of Nickel in Oxide MicrostructuresIvar REIMANIS, Colorado School of Mines, Golden, United States
    Michael KNIGHT, CoorsTek, Golden, United States

    person_pinIvar REIMANIS, Colorado School of Mines, Golden, United States
    09:00 - 09:15 | TRansformation Induced Plasticity (TRIP) in ceria-doped zirconia: A phase transformation characterization at the nanoscaleMarcelo DEMETRIO DE MAGALHAES, Université de Lyon, INSA-Lyon, UMR CNRS 5510 MATEIS, Villeurbanne, France
    Helen REVERON, Université de Lyon, INSA-Lyon, UMR CNRS 5510 MATEIS, Villeurbanne, France
    Jérôme CHEVALIER, Université de Lyon, INSA-Lyon, UMR CNRS 5510 MATEIS, Villeurbanne, France
    Olivier THOMAS, Aix Marseille Univ, Univ Toulon, CNRS, IM2NP UMR 7334, Marseille, France
    Solène COMBY-DASSONNEVILLE, Aix Marseille Univ, Univ Toulon, CNRS, IM2NP UMR 7334, Marseille, France
    Sylvain MEILLE, Université de Lyon, INSA-Lyon, UMR CNRS 5510 MATEIS, Villeurbanne, France
    Michael TEXIER, Aix Marseille Univ, Univ Toulon, CNRS, IM2NP UMR 7334, Marseille, France
    Thierry DOUILLARD, Université de Lyon, INSA-Lyon, UMR CNRS 5510 MATEIS, Villeurbanne, France
    Thomas W. CORNELIUS, Aix Marseille Univ, Univ Toulon, CNRS, IM2NP UMR 7334, Marseille, France
    David RODNEY, Institut Lumière Matière, CNRS-Université Claude Bernard Lyon 1, Villeurbanne, France

    person_pinMarcelo DEMETRIO DE MAGALHAES, Université de Lyon, INSA-Lyon, UMR CNRS 5510 MATEIS, Villeurbanne, France
    09:15 - 09:30 | Structural Health Monitoring sensor based on Electrical Time Domain Reflectometry thanks to dielectric ceramicsDéborah MOERLEN,
    Cédric PAYAN, Saint-Gobain, Cavaillon, France
    Sébastien PINSON, Saint-Gobain, Cavaillon, France
    Céline SKORA, Saint-Gobain, Cavaillon, France
    Valérie PARRY, SIMaP , Grenoble, France
    Mickaël BOINET, Saint-Gobain, Cavaillon, France
    Fabien VOLPI, SIMaP , Grenoble, France

    person_pinDéborah MOERLEN, SIMaP , Grenoble, France; Saint-Gobain, Cavaillon, France
    09:30 - 09:45 | SPECIFIC METHODOLOGY FOR CHARACTERIZATION OF BENTONITE-LIKE CERAMIC RAW MATERIALSJessica GILABERT, Instituto de Tecnología Cerámica. Asociación de Investigación de las Industrias Cerámicas. Universitat Jaume I, Castellón, Spain
    Eulalia ZUMAQUERO, Instituto de Tecnología Cerámica. Asociación de Investigación de las Industrias Cerámicas. Universitat Jaume I, Castellón, Spain
    Eva Maria DIAZ-CANALES, Instituto de Tecnología Cerámica. Asociación de Investigación de las Industrias Cerámicas. Universitat Jaume I, Castellón, Spain
    Maria Jesus VENTURA, Instituto de Tecnología Cerámica. Asociación de Investigación de las Industrias Cerámicas. Universitat Jaume I, Castellón, Spain
    Maria Pilar GOMEZ-TENA, Instituto de Tecnología Cerámica. Asociación de Investigación de las Industrias Cerámicas. Universitat Jaume I, Castellón, Spain

    person_pinJessica GILABERT, Instituto de Tecnología Cerámica. Asociación de Investigación de las Industrias Cerámicas. Universitat Jaume I, Castellón, Spain
    09:45 - 10:00 | Rheo-SAXS-WAXS investigation of the setting process of β-gypsum plaster and calcium phosphate cementsAlexandre FANTOU, Univ Lyon, INSA-Lyon, CNRS, MATEIS UMR5510, F-69621 Villeurbanne, France, Villeurbanne, France
    Stephanie ROEDEL, Univ Lyon, INSA-Lyon, CNRS, MATEIS UMR5510, F-69621 Villeurbanne, France, Villeurbanne, France
    William CHÈVREMONT, ESRF, 6 rue Jules Horowitz, 38043 Grenoble Cedex 9, France, Grenoble, France
    Guilhem BAEZA, Univ Lyon, INSA-Lyon, CNRS, MATEIS UMR5510, F-69621 Villeurbanne, France, Villeurbanne, France
    Yves JORAND, Univ Lyon, INSA-Lyon, CNRS, MATEIS UMR5510, F-69621 Villeurbanne, France, Villeurbanne, France
    Laurent GREMILLARD, Univ Lyon, INSA-Lyon, CNRS, MATEIS UMR5510, F-69621 Villeurbanne, France, Villeurbanne, France
    Sylvain MEILLE, Univ Lyon, INSA-Lyon, CNRS, MATEIS UMR5510, F-69621 Villeurbanne, France, Villeurbanne, France
    Solène TADIER, Univ Lyon, INSA-Lyon, CNRS, MATEIS UMR5510, F-69621 Villeurbanne, France, Villeurbanne, France

    person_pinAlexandre FANTOU, Univ Lyon, INSA-Lyon, CNRS, MATEIS UMR5510, F-69621 Villeurbanne, France, Villeurbanne, France
    HL08:30 - 09:00 | Attack of Fine Glass Powders by Engineered Basic Solutions: from Shaping to Functionalization of Glasses and Glass-CeramicsEnrico BERNARDO, Department of Industrial Engineering, University of Padova, Padova, Italy
    Hamada ELSAYED, Department of Industrial Engineering, University of Padova, Padova, Italy
    Jozef KRAXNER, FunGlass - Centre for Functional and Surface Functionalized Glass, Alexander Dubcek University of Trenčín, Slovakia, Trenčín, Slovakia

    person_pinEnrico BERNARDO, Department of Industrial Engineering, University of Padova, Padova, Italy
    09:00 - 09:15 | Design methods and tools for ceramics Additive Manufacturing of lattice structures: an overviewLuca GRIGOLATO,
    Arish DASAN, Centre for Functional and Surface-Functionalized Glass, Alexander Dubček University of Trenčín, Trenčín, Slovakia
    Hamada ELSAYED,
    Gianpaolo SAVIO, Department of Civil, Environmental and Architectural Engineering (ICEA), University of Padova, Padova, Italy
    Enrico BERNARDO, Department of Industrial Engineering, University of Padova, Padova, Italy

    person_pinLuca GRIGOLATO, Department of Industrial Engineering, University of Padova, Padova, Italy; Department of Civil, Environmental and Architectural Engineering (ICEA), University of Padova, Padova, Italy
    09:15 - 09:30 | 3D Printing of Wollastonite-Diopside Glass-Ceramics from Silica Defective Glass Powders and Reactive Silicone BinderHamada ELSAYED,
    Franco Matías STABILE ,
    Paulina OZÓG, FunGlass – Centre for Functional and Surface Functionalized Glass, Alexander Dubcek University of Trencín, Trencín, Slovakia
    Jozef KRAXNER, FunGlass – Centre for Functional and Surface Functionalized Glass, Alexander Dubcek University of Trencín, Trencín, Slovakia
    DušAn GALUSEK,
    Enrico BERNARDO, Department of Industrial Engineering, University of Padova , Padova, Italy

    person_pinHamada ELSAYED, Department of Industrial Engineering, University of Padova , Padova, Italy; Refractories, Ceramics and Building materials Department, National Research Centre, Cairo, Egypt
    09:30 - 09:45 | Direct Ink Writing of 3D Titania-Glass Composite for Photocatalytic Applications  Mokhtar MAHMOUD,
    Jozef KRAXNER, FunGlass, A. Dubček University of Trenčín, Trenčín, Slovakia
    Hamada ELSAYED, Department of Industrial Engineering, University of Padova, Padova, Italy
    DušAn GALUSEK,
    Enrico BERNARDO, Department of Industrial Engineering, University of Padova, Padova, Italy

    person_pinMokhtar MAHMOUD, FunGlass, A. Dubček University of Trenčín, Trenčín, Slovakia; Department of Industrial Engineering, University of Padova, Padova, Italy; Department of Glass Research, National Research Centre, Cairo, Egypt
    09:45 - 10:00 | Functionalization of LCD Glass for the Manufacturing of Advanced 3D-printed Translucent Photocatalytic ScaffoldsElena COLUSSO, Department of Industrial Engineering, University of Padova, Padova, Italy
    Hamada ELSAYED, Department of Industrial Engineering, University of Padova, Padova, Italy
    Paulina OZÓG, Centre for Functional and Surface-Functionalized Glass, Alexander Dubček University of Trenčín, Trenčín, Slovakia
    DušAn GALUSEK, Centre for Functional and Surface-Functionalized Glass, Alexander Dubček University of Trenčín, Trenčín, Slovakia
    Enrico BERNARDO, Department of Industrial Engineering, University of Padova, Padova, Italy

    person_pinElena COLUSSO, Department of Industrial Engineering, University of Padova, Padova, Italy
    10:00 - 10:15 | Discarded Pharmaceutical Glass as a Key to Sustainable Alkali Activated Building MaterialsGiulia TAMENI, Department of Industrial Engineering, University of Padova, Padova, Italy
    Francesco CAMMELLI,
    Jozef KRAXNER, FunGlass - Centre for Functional and Surface Functionalized Glass, Alexander Dubcek University of Trenčín, Slovakia, Trencin, Slovakia
    Daniel DAWSON, School of Chemistry and Centre of Magnetic Resonance, University of St Andrews, UK, St Andrews, United Kingdom
    Sharon ASHBROOK, School of Chemistry and Centre of Magnetic Resonance, University of St Andrews, UK, St Andrews, United Kingdom
    Enrico BERNARDO,

    person_pinGiulia TAMENI, Department of Industrial Engineering, University of Padova, Padova, Italy
    10:15 - 10:30 | Glass-based inorganic membranes for copper adsorption from wastewaterDiana LAGO, FunGlass – Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Študentská 2, 911 50, Trenčín, Slovakia
    Jozef KRAXNER, FunGlass – Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Študentská 2, 911 50, Trenčín, Slovakia
    DušAn GALUSEK, Joint Glass Centre of the IIC SAS, TnUAD and FChFT STU, 911 50, Trenčín, Slovakia
    Enrico BERNARDO, Department of Industrial Engineering, University of Padova, Via Marzolo 9, Padova, 35131, Padova, Italy

    person_pinDiana LAGO, FunGlass – Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Študentská 2, 911 50, Trenčín, Slovakia
    HL11:00 - 11:30 | Unusual processing routes for the production of ceramic matrix compositesJon BINNER, University of Birmingham, BIRMINGHAM, United Kingdom
    Zhongmin LI, University of Birmingham, BIRMINGHAM, United Kingdom
    Thomas NELSON, University of Birmingham, BIRMINGHAM, United Kingdom
    Becky STEADMAN, University of Birmingham, BIRMINGHAM, United Kingdom
    Erin VALENZUELA-HEEGER, University of Birmingham, BIRMINGHAM, United Kingdom
    Vinothini VENKATACHALAM, University of Birmingham, BIRMINGHAM, United Kingdom
    Daorong YE, University of Birmingham, BIRMINGHAM, United Kingdom
    Mohammed YOUNAS, University of Birmingham, BIRMINGHAM, United Kingdom
    Elia ZANCAN, University of Birmingham, BIRMINGHAM, United Kingdom

    person_pinJon BINNER, University of Birmingham, BIRMINGHAM, United Kingdom
    11:30 - 11:45 | Preparation and characterization of barium strontium titanate powders and their application in dielectric BST/polymer compositesWeronika BULEJAK, Faculty of Chemistry, Warsaw University of Technology, Warsaw, Poland
    Dariusz KAJEWSKI, Institute of Physics, University of Silesia, Chorzow, Poland
    Joanna TANSKA, Faculty of Chemistry, Warsaw University of Technology, Warsaw, Poland
    Anna WIECLAW-MIDOR, Faculty of Chemistry, Warsaw University of Technology, Warsaw, Poland
    Mikolaj SZAFRAN, Faculty of Chemistry, Warsaw University of Technology, Warsaw, Poland

    person_pinWeronika BULEJAK, Faculty of Chemistry, Warsaw University of Technology, Warsaw, Poland
    11:45 - 12:00 | Continuous supercritical water impregnation method for the preparation of carbon-supported metal oxide composite materialsFlorentina MAXIM, Ilie Murgulescu Institute of Physical Chemistry of the Romanian Academy, Splaiul Independentei 202, 060021 Bucharest, Romania
    Elena-Ecaterina TOMA, Ilie Murgulescu Institute of Physical Chemistry of the Romanian Academy, Splaiul Independentei 202, 060021 Bucharest, Romania
    Giuseppe-Stefan STOIAN, Ilie Murgulescu Institute of Physical Chemistry of the Romanian Academy, Splaiul Independentei 202, 060021 Bucharest, Romania
    Cristian CONTESCU, Retired from Oak Ridge National Laboratory , One Bethel Valley Road, Oak Ridge, TN 37831-6087, United States
    Irina ATKINSON, Ilie Murgulescu Institute of Physical Chemistry of the Romanian Academy, Splaiul Independentei 202, 060021 Bucharest, Romania
    Marta FERRO, Department of Materials and Ceramic Engineering, University of Aveiro, 3810-193 Aveiro, Portugal
    Christian LUDWIG, Laboratory for Bioenergy and Catalysis (LBK), ENE Division, Paul Scherrer Institute, 5232 Villigen PSI, Switzerland

    person_pinFlorentina MAXIM, Ilie Murgulescu Institute of Physical Chemistry of the Romanian Academy, Splaiul Independentei 202, 060021 Bucharest, Romania
    12:00 - 12:15 | Colloidal processing in manufacturing of ceramic-polymer composites for electronic applicationMikolaj SZAFRAN, Warsaw University of Technology, Faculty of Chemistry, Poland, Warsaw, Poland
    Weronika BULEJAK, Warsaw University of Technology, Faculty of Chemistry, Poland, Warsaw, Poland
    Anna WIECLAW-MIDOR, Warsaw University of Technology, Faculty of Chemistry, Poland, Warsaw, Poland

    person_pinMikolaj SZAFRAN, Warsaw University of Technology, Faculty of Chemistry, Poland, Warsaw, Poland
    12:15 - 12:30 | Reaction-sintered zircon-based nanocomposite coatings by suspension plasma sprayingEduardo ROSADO, Institute of Ceramics and Glass (ICV), Madrid, Spain
    Eugeni CAÑAS, Institute of Ceramic Technology (IUTC), Castellón de la Plana, Spain
    Enrique SÁNCHEZ, Institute of Ceramic Technology (IUTC), Castellón de la Plana, Spain
    Rodrigo MORENO, Institute of Ceramics and Glass (ICV), Madrid, Spain

    person_pinEduardo ROSADO, Institute of Ceramics and Glass (ICV), Madrid, Spain
    12:30 - 12:45 | Rheology of melt composites to determine the printing window in FFF of ceramic materialsBegoña FERRARI, Instituto de Cerámica y Vidrio, CSIC, Madrid, Spain
    Ana FERRANDEZ-MONTERO, Instituto de Cerámica y Vidrio, CSIC, Madrid, Spain
    Pablo ORTEGA, Instituto de Cerámica y Vidrio, CSIC, Madrid, Spain
    Oxel URRA, Instituto de Cerámica y Vidrio, CSIC, Madrid, Spain
    Caterina CHIRICO, Instituto de Cerámica y Vidrio, CSIC, Madrid, Spain
    A. Javier SANCHEZ-HERENCIA, Instituto de Cerámica y Vidrio, CSIC, Madrid, Spain

    person_pinBegoña FERRARI, Instituto de Cerámica y Vidrio, CSIC, Madrid, Spain
    12:45 - 13:00 | An innovative strategy for building semiconductor heterostructures: molecular recognitionAna CASTELLANOS-ALIAGA, Instituto de Cerámica y Vidrio - CSIC, Kelsen 5, Campus de Cantoblanco, 28049, Madrid, Spain
    David G. CALATAYUD,
    Teresa JARDIEL, Instituto de Cerámica y Vidrio - CSIC, Kelsen 5, Campus de Cantoblanco, 28049, Madrid, Spain
    Amador C. CABALLERO, Instituto de Cerámica y Vidrio - CSIC, Kelsen 5, Campus de Cantoblanco, 28049, Madrid, Spain
    Marco PEITEADO, Instituto de Cerámica y Vidrio - CSIC, Kelsen 5, Campus de Cantoblanco, 28049, Madrid, Spain

    person_pinAna CASTELLANOS-ALIAGA, Instituto de Cerámica y Vidrio - CSIC, Kelsen 5, Campus de Cantoblanco, 28049, Madrid, Spain
    HL11:00 - 11:30 | Cold and Flash Sintering of Al-Doped LLZO for Solid-State Battery ApplicationsClaire DANCER, University of Warwick, Coventry, United Kingdom
    Gareth JONES, University of Warwick, Coventry, United Kingdom
    Dinesha DABERA, University of Warwick, Coventry, United Kingdom
    Parinaz TABRIZIAN, University of Warwick, Coventry, United Kingdom
    Christopher GREEN, Lucideon Ltd, Stoke-on-Trent, United Kingdom
    David PEARMAIN, Lucideon Ltd, Stoke-on-Trent, United Kingdom
    Geoff WEST, University of Warwick, Coventry, United Kingdom
    Emma KENDRICK, University of Birmingham, Birmingham, United Kingdom

    person_pinClaire DANCER, University of Warwick, Coventry, United Kingdom
    11:30 - 11:45 | Crack Healing Behavior Enhanced under DC electric filed in 8Y-CSZKoji MORITA,
    Shoma TAKAHASHI,
    Kohta NAMBU, Kyushu University, Fukuoka, Japan
    Daisuke TERADA, Chiba Institute of Technology, Narashino, Japan
    Tomoharu TOKUNAGA, Nagoya University, Nagoya, Japan
    Takahisa YAMAMOTO, Nagoya University, Nagoya, Japan

    person_pinKoji MORITA, National Institute for Materials Science (NIMS), Tsukuba, Japan; Chiba Institute of Technology, Narashino, Japan; Kyushu University, Fukuoka, Japan
    11:45 - 12:00 | Uniform Flash sintering by material system designShenghuan DING, Oxford University, Oxford, United Kingdom
    Richard TODD, Oxford University, Oxford, United Kingdom

    person_pinShenghuan DING, Oxford University, Oxford, United Kingdom
    12:00 - 12:15 | Flash and Breakdown: Hotspots and thermal gradients in barium titanate during flash sinteringDaniil LEWIN, Institute for Materials Science and Center for Nanointegration Duisburg-Essen (CENIDE), Faculty of Engineering, University of Duisburg-Essen, Essen, Germany
    Ivo MICHIELS, Institute for Materials Science and Center for Nanointegration Duisburg-Essen (CENIDE), Faculty of Engineering, University of Duisburg-Essen, Essen, Germany
    Doru C. LUPASCU, Institute for Materials Science and Center for Nanointegration Duisburg-Essen (CENIDE), Faculty of Engineering, University of Duisburg-Essen, Essen, Germany

    person_pinDaniil LEWIN, Institute for Materials Science and Center for Nanointegration Duisburg-Essen (CENIDE), Faculty of Engineering, University of Duisburg-Essen, Essen, Germany
    12:15 - 12:30 | Effect of frequency on the AC flash Sintering of gadolinium doped ceria ceramics.Apurv DASH, Technical University of Denmark, Kgs. Lyngby, Denmark
    Robert MUECKE, Forschungszentrum Jülich, Jülich, Germany
    Olivier GUILLON, Forschungszentrum Jülich, Jülich, Germany

    person_pinApurv DASH, Technical University of Denmark, Kgs. Lyngby, Denmark
    12:30 - 12:45 | Photoluminescence property control of Ga2O3 by flash sinteringTomoharu TOKUNAGA, Nagoya University, Nagoya, Japan
    Ryonosuke ONO, Nagoya University, Nagoya, Japan
    Ayu KODAIRA, Nagoya University, Nagoya, Japan
    Hidehiro YOSHIDA, The University of Tokyo, Bunkyo-ku, Japan
    Yamamoto TAKAHISA, Nagoya University, Nagoya, Japan

    person_pinTomoharu TOKUNAGA, Nagoya University, Nagoya, Japan
    HL11:00 - 11:30 | Large Scale Additive Manufacturing of Inorganic Components Using Binder JettingFilippo GOBBIN, Università degli studi di Padova, Padova, Italy
    Hamada ELSAYED, Università degli studi di Padova, Padova, Italy
    Giulia PACIOTTI,
    Antonino ITALIANO, Desamanera srl, Rovigo, Italy
    Paolo COLOMBO, Università degli studi di Padova, Padova, Italy

    person_pinFilippo GOBBIN, Università degli studi di Padova, Padova, Italy
    11:30 - 11:45 | Influence of droplet size and velocity on fluids intrusion into powder bed in binder jet 3D printing of cementitious materials Farid SALARI, Concr3de Printing BV, Rotterdam, Netherlands
    Matteo BALDASSARI, Concr3de Printing BV, Rotterdam, Netherlands

    person_pinFarid SALARI, Concr3de Printing BV, Rotterdam, Netherlands
    11:45 - 12:00 | Dense and Strong Ceramic Composites via Binder Jetting and Spontaneous InfiltrationQuinton PORTER, Texas A&M University, College Station, United States
    Mohammadamin MOGHADASI, Texas A&M University, College Station, United States
    Zhijian PEI, Texas A&M University, College Station, United States
    Chao MA, Texas A&M University, College Station, United States

    person_pinChao MA, Texas A&M University, College Station, United States
    12:00 - 12:15 | Press-compaction-assisted binder jetting of textured ceramicsMohammadamin MOGHADASI, Texas A&M University, College Station, United States
    Alireza MAHDAVIARAB, Texas A&M University, College Station, United States
    Anna-Katharina HOFER, University of Leoben, Leoben, Austria
    Raul BERMEJO, University of Leoben, Leoben, Austria
    Zhijian PEI, Texas A&M University, College Station, United States
    Chao MA, Texas A&M University, College Station, United States

    person_pinChao MA, Texas A&M University, College Station, United States
    12:15 - 12:30 | 3D printed geopolymer-hydrotalcite porous scaffolds for CO2 capture at elevated temperaturesMarco D'AGOSTINI, Department of Industrial Engineering, University of Padova, Padova, Italy
    Margherita CAVALLO, Department of Chemistry, NIS and INSTM Centres, University of Torino, Torino, Italy
    Natale Gabriele PORCARO, Department of Chemistry, NIS and INSTM Centres, University of Torino, Torino, Italy
    Francesca BONINO, Department of Chemistry, NIS and INSTM Centres, University of Torino, Torino, Italy
    Valentina CROCELLÀ, Department of Chemistry, NIS and INSTM Centres, University of Torino, Torino, Italy
    Paolo COLOMBO,
    Giorgia FRANCHIN, Department of Industrial Engineering, University of Padova, Padova, Italy

    person_pinMarco D'AGOSTINI, Department of Industrial Engineering, University of Padova, Padova, Italy
    12:30 - 12:45 | Additive manufacturing for dental restorations by layerwise slurry deposition (LSD-print) technologyAndrea ZOCCA, BAM - Bundesanstalt für Materialforschung und -prüfung, Berlin, Germany
    Hoffmann MORITZ, Ludwig-Maximilians-Universität München, Poliklinik für zahnärztliche Prothetik, Munich, Germany
    Panzier NICOLE, BAM - Bundesanstalt für Materialforschung und -prüfung, Berlin, Germany
    Schubert HENDRIK, BAM - Bundesanstalt für Materialforschung und -prüfung, Berlin, Germany
    Stawarczyk BOGNA, Ludwig-Maximilians-Universität München, Poliklinik für zahnärztliche Prothetik, Munich, Germany
    Günster JENS, BAM - Bundesanstalt für Materialforschung und -prüfung, Berlin, Germany

    person_pinAndrea ZOCCA, BAM - Bundesanstalt für Materialforschung und -prüfung, Berlin, Germany
    12:45 - 13:00 | Systematic study at the micro- and submicrometric length scale up to 600 ºC of 3D-inkjet printheadGuiomar RIU PERDRIX, Steros GPA Innovative, Barcelona, Spain
    Joan Josep ROA ROVIRA, Steros GPA Innovative, Barcelona, Spain

    person_pinJoan Josep ROA ROVIRA, Steros GPA Innovative, Barcelona, Spain
    HL11:00 - 11:30 | Achieving stable crack growth in ceramics at the nanoscale: transformation toughening in zirconiaOriol GAVALDA DIAZ,
    Max EMMANUEL , Imperial College London, London, United Kingdom
    Katharina MARQUARDT, Imperial College London, London, United Kingdom
    Eduardo SAIZ, Imperial College London, London, United Kingdom
    Finn GIULIANI, Imperial College London, London, United Kingdom

    person_pinOriol GAVALDA DIAZ, University of Nottingham, Nottingham, United Kingdom; Imperial College London, London, United Kingdom
    11:30 - 11:45 | Toughness measurements of bearing grade silicon nitrideMehdi MAZAHERI, SKF, The Netherlands

    person_pinMehdi MAZAHERI, SKF, The Netherlands
    11:45 - 12:00 | Crack propagation in the composites based on BaTiO3Zdenek CHLUP, Institute of Physics of Materials CAS, Brno, Czechia
    Hynek HADRABA, Institute of Physics of Materials CAS, Brno, Czechia
    Luca BERTOLLA, Institute of Physics of Materials CAS, Brno, Czechia
    Daniel DRDLÍK, CEITEC BUT, Brno University of Technology, Brno, Czechia
    Vojtech MARÁK, CEITEC BUT, Brno University of Technology, Brno, Czechia
    Oldrich ŠEVECEK, Institute of Physics of Materials CAS, Brno, Czechia
    Filip ŠIŠKA, Institute of Physics of Materials CAS, Brno, Czechia
    Jiri ERHART, CEITEC BUT, Brno University of Technology, Brno, Czechia
    Pavel TOFEL, CEITEC BUT, Brno University of Technology, Brno, Czechia
    Karel MACA, CEITEC BUT, Brno University of Technology, Brno, Czechia

    person_pinZdenek CHLUP, Institute of Physics of Materials CAS, Brno, Czechia
    12:00 - 12:15 | Fracture size effect in alumina single crystal: experiments-simulation dialogueRonan HENRY, Univ Rouen Normandie, INSA Rouen Normandie, GPM Laboratory, Rouen, France
    Aurélien DOITRAND, Univ Lyon, INSA Lyon, MATEIS Laboratory, Villeurbanne, France
    Sylvain MEILLE, Univ Lyon, INSA Lyon, MATEIS Laboratory, Villeurbanne, France

    person_pinSylvain MEILLE, Univ Lyon, INSA Lyon, MATEIS Laboratory, Villeurbanne, France
    12:15 - 12:30 | The effect of sub-critical crack growth on measured strength distributionsPeter SUPANCIC, Montanuniversität Leoben, 8700 Leoben, Austria

    person_pinPeter SUPANCIC, Montanuniversität Leoben, 8700 Leoben, Austria
    12:30 - 12:45 | Additive manufacturing of Al2O3 with engineered interlayers and high toughness through multi-material co-extrusionShitong ZHOU, Imperial College London, London, United Kingdom
    Qiaosong CAI , Imperial College London, London, United Kingdom
    Iuliia TIRICHENKO , Imperial College London, London, United Kingdom
    Victoria VILCHEZ , Imperial College London, London, United Kingdom
    Oriol GAVALDA-DIAZ,
    Florian BOUVILLE , Imperial College London, London, United Kingdom
    Eduardo SAIZ GUTIERREZ, Imperial College London, London, United Kingdom

    person_pinShitong ZHOU, Imperial College London, London, United Kingdom
    12:45 - 13:00 | Dislocation-based competition of plasticity and cracking in oxides: a scale-dependent studyXufei FANG, Technische Universität Darmstadt, Darmstadt, Germany
    Kuan DING, Technische Universität Darmstadt, Darmstadt, Germany
    Jürgen RÖDEL, Technische Universität Darmstadt, Darmstadt, Germany

    person_pinXufei FANG, Technische Universität Darmstadt, Darmstadt, Germany
    11:00 - 11:15 | Extrusion of Ceramic Matrix Composites Tavs JORGENSEN, Univeristy of the West of England, Bristol, United Kingdom
    Sonny LIGHTFOOT, Univeristy of the West of England, Bristol, United Kingdom

    person_pinTavs JORGENSEN, Univeristy of the West of England, Bristol, United Kingdom
    11:15 - 11:30 | Seamless bonding of carbides: the role of interface energy.Sasa KOVACEVIC, Imperial College, London, United Kingdom
    Rui PAN, Beijing University of Technology, Beijing, China
    Dusan SEKULIC, University of Kentucky, Lexington, United States
    Sinisa MESAROVIC, Washington State University, Pullman, United States

    person_pinSinisa MESAROVIC, Washington State University, Pullman, United States
    11:30 - 11:45 | Interdiffusion in TiB2-CrB2 CeramicsSteven SMITH, Missouri University of Science and Technology, Rolla, United States
    William FAHRENHOLTZ, Missouri University of Science and Technology, Rolla, United States
    David LIPKE, Missouri University of Science and Technology, Rolla, United States
    Laura SILVESTRONI, CNR-ISTEC, Faenza, Italy

    person_pinSteven SMITH, Missouri University of Science and Technology, Rolla, United States
    11:45 - 12:00 | Microstructure and properties of (Zr,Ti,Nb)B2 ternary solid solution ceramicNicola GILLI, CNR-IMM, Bologna, Italy
    Laura SILVESTRONI, CNR-ISTEC, Faenza, Italy
    William G. FAHRENHOLTZ, Department of Materials Science and Engineering, MS&T, Rolla, United States
    Emilio JIMENEZ PIQUE, Department of Materials Science and Engineering, EEBE, Barcelona, Spain
    Laia ORTIZ MEMBRADO, Department of Materials Science and Engineering, EEBE, Barcelona, Spain
    Sandra GARCIA-GONZALEZ, Department of Materials Science and Engineering, EEBE, Barcelona, Spain
    Jeremy WATTS, Department of Materials Science and Engineering, MS&T, Rolla, United States
    Steven SMITH, Department of Materials Science and Engineering, MS&T, Rolla, United States

    person_pinNicola GILLI, CNR-IMM, Bologna, Italy
    12:00 - 12:15 | Role of (micro)structural characteristics of BP and B12P2 powders on their thermal stability and their sintering abilityYves TAHAN, Institute for Research on Ceramics (IRCER), UMR CNRS 7315, Univ. Limoges, Limoges, France
    Olivier RAPAUD, Institute for Research on Ceramics (IRCER), UMR CNRS 7315, Univ. Limoges, Limoges, France
    Nicolas PRADEILLES, Institute for Research on Ceramics (IRCER), UMR CNRS 7315, Univ. Limoges, Limoges, France
    Alexandre MAÎTRE, Institute for Research on Ceramics (IRCER), UMR CNRS 7315, Univ. Limoges, Limoges, France
    Sarah DINE, Process and Materials Sciences Laboratory (LSPM), UPR CNRS 3407, Univ. Sorbonne Paris-Nord, Villetaneuse, France
    Dominique VREL, Process and Materials Sciences Laboratory (LSPM), UPR CNRS 3407, Univ. Sorbonne Paris-Nord, Villetaneuse, France
    Hicham MOUTAABBID, IMPMC, UMR CNRS 7590, Univ. Sorbonne, Paris, France
    Yann LE GODEC, IMPMC, UMR CNRS 7590, Univ. Sorbonne, Paris, France

    person_pinYves TAHAN, Institute for Research on Ceramics (IRCER), UMR CNRS 7315, Univ. Limoges, Limoges, France
    12:15 - 12:30 | Mechanical performance under service-like working conditions on ground WC-Co hard metal grades: effect of the WC and Co contentGuiomar RIU PERDRIX,
    Miguel MONCLÚS, IMDEA Materials, Getafe, Spain
    Luis LLANES, CIEFMA-Escola d’Enginyeria de Barcelona Est, Universitat Politècnica de Catalunya, Barcelona, Spain
    Jon M. MOLINA-ALDAREGUÍA, IMDEA Materials, Getafe, Spain
    Joan Josep ROA ROVIRA, Steros GPA Innovative, Barcelona, Spain

    person_pinJoan Josep ROA ROVIRA, Steros GPA Innovative, Barcelona, Spain
    HL11:00 - 11:30 | A lead-free Ba0.85Ca0.15Ti0.9Zr0.1O3 ferroelectric ceramic with tailored microstructure and ultrahigh piezo-strain responseHarvey AMORÍN, Instituto de Ciencia de Materiales de Madrid - CSIC, Madrid, Spain
    Michel VENET, Departamento de Física, Universidade Federal de São Carlos, São Carlos, SP, Brazil
    José E. GARCÍA, Department of Physics, Universitat Politecnica de Catalunya, Barcelona, Spain
    Diego A. OCHOA, Department of Physics, Universitat Politecnica de Catalunya, Barcelona, Spain
    Pablo RAMOS, Departamento de Electrónica, Universidad de Alcalá, Alcalá de Henares, Spain
    Alicia CASTRO, Instituto de Ciencia de Materiales de Madrid - CSIC, Madrid, Spain
    Miguel ALGUERÓ, Instituto de Ciencia de Materiales de Madrid - CSIC, Madrid, Spain

    person_pinHarvey AMORÍN, Instituto de Ciencia de Materiales de Madrid - CSIC, Madrid, Spain
    11:30 - 11:45 | Mechanical activation in the reduction of processing temperatures of BCZT ceramics prepared by Solid-state routeMarzia MUREDDU, Department of Chemical, Physical, Mathematical, and Natural Sciences, University of Sassari, Via Vienna 2, I-07100 Sassari, Italy; , Sassari, Italy
    José F. BARTOLOMÉ , Instituto de Ciencia de Materiales de Madrid (ICMM), Consejo Superior de Investigaciones Científicas (CSIC), c/ Sor Juana Inés de la Cruz, 3, Cantoblanco, 28049 Madrid, Spain; , Madrid, Spain
    Sonia LOPEZ-ESTEBAN , Instituto de Ciencia de Materiales de Madrid (ICMM), Consejo Superior de Investigaciones Científicas (CSIC), c/ Sor Juana Inés de la Cruz, 3, Cantoblanco, 28049 Madrid, Spain; , Madrid, Spain
    Maria DORE , Department of Chemical, Physical, Mathematical, and Natural Sciences, University of Sassari, Via Vienna 2, I-07100 Sassari, Italy; , Sassari, Italy
    Stefano ENZO , Department of Chemical, Physical, Mathematical, and Natural Sciences, University of Sassari, Via Vienna 2, I-07100 Sassari, Italy; , Sassari, Italy
    Antonio IACOMINI , Department of Chemical, Physical, Mathematical, and Natural Sciences, University of Sassari, Via Vienna 2, I-07100 Sassari, Italy; , Sassari, Italy
    Álvaro GARCÍA , Instituto de Ciencia de Materiales de Madrid (ICMM), Consejo Superior de Investigaciones Científicas (CSIC), c/ Sor Juana Inés de la Cruz, 3, Cantoblanco, 28049 Madrid, Spain; , Madrid, Spain
    Sebastiano GARRONI , Department of Chemical, Physical, Mathematical, and Natural Sciences, University of Sassari, Via Vienna 2, I-07100 Sassari, Italy; , Sassari, Italy
    Lorena PARDO , Instituto de Ciencia de Materiales de Madrid (ICMM), Consejo Superior de Investigaciones Científicas (CSIC), c/ Sor Juana Inés de la Cruz, 3, Cantoblanco, 28049 Madrid, Spain; , Madrid, Spain

    person_pinMarzia MUREDDU, Department of Chemical, Physical, Mathematical, and Natural Sciences, University of Sassari, Via Vienna 2, I-07100 Sassari, Italy; , Sassari, Italy
    11:45 - 12:00 | Piezoelectric properties of BZT-BCT ceramics obtained by mechanosynthesis and their dependence on processing parametersRocío MORICHE, Departamento de Física de la Materia Condensada, ICMS, CSIC-Universidad de Sevilla, Apartado. 1065, 41080 Sevilla, Spain., Sevilla, Spain
    María Jesús SAYAGUÉS, Instituto de Ciencia de Materiales de Sevilla (ICMS), CSIC – Universidad de Sevilla, Avda. Américo Vespucio 49, 41092 Sevilla, Spain., Sevilla, Spain
    Francisco J. GOTOR, Instituto de Ciencia de Materiales de Sevilla (ICMS), CSIC – Universidad de Sevilla, Avda. Américo Vespucio 49, 41092 Sevilla, Spain., Sevilla, Spain
    Rosalía POYATO, Instituto de Ciencia de Materiales de Sevilla (ICMS), CSIC – Universidad de Sevilla, Avda. Américo Vespucio 49, 41092 Sevilla, Spain., Sevilla, Spain
    Ricardo DONATE, Departamento de Ingeniería Mecánica, Universidad de Las Palmas de Gran Canaria, Las Palmas de Gran Canaria 35017, Spain., Las Palmas de Gran Canaria, Spain
    Mario MONZÓN, Departamento de Ingeniería Mecánica, Universidad de Las Palmas de Gran Canaria, Las Palmas de Gran Canaria 35017, Spain., Las Palmas de Gran Canaria, Spain
    Rubén PAZ, Departamento de Ingeniería Mecánica, Universidad de Las Palmas de Gran Canaria, Las Palmas de Gran Canaria 35017, Spain., Las Palmas de Gran Canaria, Spain

    person_pinRocío MORICHE, Departamento de Física de la Materia Condensada, ICMS, CSIC-Universidad de Sevilla, Apartado. 1065, 41080 Sevilla, Spain., Sevilla, Spain
    12:00 - 12:15 | Optimization of the piezoelectric and dielectric properties of BST-BCT ceramics obtained by mechanosynthesis  Rosalía POYATO, Instituto de Ciencia de Materiales de Sevilla, ICMS, CSIC-Universidad de Sevilla, Américo Vespucio 49, 41092, Sevilla, Spain , Seville, Spain
    Andrea OTERO,
    Francisco José GOTOR, Instituto de Ciencia de Materiales de Sevilla, ICMS, CSIC-Universidad de Sevilla, Américo Vespucio 49, 41092, Sevilla, Spain , Seville, Spain
    M.j. SAYAGUÉS, Instituto de Ciencia de Materiales de Sevilla, ICMS, CSIC-Universidad de Sevilla, Américo Vespucio 49, 41092, Sevilla, Spain , Seville, Spain
    Ana MORALES-RODRÍGUEZ, Dept. de Física de la Materia Condensada, Universidad de Sevilla, Apdo. 1065, 41080, Sevilla, Spain , Seville, Spain
    Rocío MORICHE, Dept. de Física de la Materia Condensada, Universidad de Sevilla, Apdo. 1065, 41080, Sevilla, Spain , Seville, Spain

    person_pinRosalía POYATO, Instituto de Ciencia de Materiales de Sevilla, ICMS, CSIC-Universidad de Sevilla, Américo Vespucio 49, 41092, Sevilla, Spain , Seville, Spain
    12:15 - 12:30 | Study and development of high permittivity dielectric materials for RFID applicationsTom RAUTUREAU,
    Pascal MARCHET, CNRS, Institut de Recherche sur les Céramiques (IRCER), UMR 7315, Centre Européen de la Céramique, Limoges, France
    Pierre-Marie GEFFROY, CNRS, Institut de Recherche sur les Céramiques (IRCER), UMR 7315, Centre Européen de la Céramique, Limoges, France
    Fabrice ROSSIGNOL, CNRS, Institut de Recherche sur les Céramiques (IRCER), UMR 7315, Centre Européen de la Céramique, Limoges, France
    Arnaud CARLE, AXEM Technology, Créteil, France
    Megdouda BENAMARA, AXEM Technology, Créteil, France

    person_pinTom RAUTUREAU, CNRS, Institut de Recherche sur les Céramiques (IRCER), UMR 7315, Centre Européen de la Céramique, Limoges, France; AXEM Technology, Créteil, France
    12:30 - 12:45 | Porosity effects on the dielectric, ferroelectric and piezoelectric properties of (Ba, Ca)(Ti, Zr)O3 ceramicsCristina CIOMAGA, Department of Exact and Natural Sciences, Institute of Interdisciplinary Research, Al. I. Cuza University of Iasi, Carol I, 700506, Iasi, Romania, Iasi, Romania
    Nadejda HORCHIDAN, Department of Exact and Natural Sciences, Institute of Interdisciplinary Research, Al. I. Cuza University of Iasi, Carol I, 700506, Iasi, Romania, Iasi, Romania
    Lavinia Petronela CURECHERIU, Dielectrics, Ferroelectrics & Multiferroics Group, Faculty of Physics, Al. I. Cuza University Iasi, Carol I, 700506, Iasi, Romania, Iasi, Romania
    Vlad Alexandru LUKACS, Dielectrics, Ferroelectrics & Multiferroics Group, Faculty of Physics, Al. I. Cuza University Iasi, Carol I, 700506, Iasi, Romania, Iasi, Romania
    Radu Stefan STIRBU,
    Liliana MITOSERIU, Dielectrics, Ferroelectrics & Multiferroics Group, Faculty of Physics, Al. I. Cuza University Iasi, Carol I, 700506, Iasi, Romania, Iasi, Romania

    person_pinCristina CIOMAGA, Department of Exact and Natural Sciences, Institute of Interdisciplinary Research, Al. I. Cuza University of Iasi, Carol I, 700506, Iasi, Romania, Iasi, Romania
    11:00 - 11:15 | Interdiffusion at electrochemical interfaces between YSZ and doped ceria  Alexander SCHWIERS,
    Christian LENSER, Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research (IEK), IEK-1: Materials Synthesis and Processing, Jülich , Germany
    Olivier GUILLON,
    Norbert H. MENZLER ,

    person_pinAlexander SCHWIERS, Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research (IEK), IEK-1: Materials Synthesis and Processing, Jülich , Germany; RWTH Aachen University, Institute of Mineral Engineering (GHI), Aachen , Germany
    11:15 - 11:30 | Study of the reactive sintering of La2SiO5/SiO2 diffusion couple for producing textured lanthanum silicate oxyapatitesLizeth ARBELAEZ, Université de Limoges, Limoges, France
    Emilie BECHADE, Université de Limoges, Limoges, France
    Pierre-Marie GEFFROY, Université de Limoges, Limoges, France
    Anne AIMABLE, Université de Limoges, Limoges, France

    person_pinLizeth ARBELAEZ, Université de Limoges, Limoges, France
    11:30 - 11:45 | Colloidal Processing based Nanocomposite Particles Growth for High-performance Intermediate-Temperature Solid Oxide Fuel CellsKazuyoshi SATO, Gunma University, Kiryu, Gunma, Japan
    Naokatsu KANNARI, Gunma University, Kiryu, Gunma, Japan
    Hiroya ABE, Osaka University, Ibaraki, Osaka, Japan
    Naoki SHIKAZONO, The University of Tokyo, Meguro, Tokyo, Japan

    person_pinKazuyoshi SATO, Gunma University, Kiryu, Gunma, Japan
    11:45 - 12:00 | Cobalt-free spinel coating on solid oxide cells interconnects using the electrophoretic deposition methodSamaneh DAVIRAN, Group of Energy Materials (GEM), École Polytechnique Fédérale de Lausanne (EPFL), Sion, Switzerland
    Elisa ZANCHI, Department of Applied Science and Technology, Politecnico di Torino, Torino, Italy, Torino, Italy
    Soukaina LAMNINI, Department of Applied Science and Technology, Politecnico di Torino, Torino, Italy, Torino, Italy
    Jan VAN HERLE, Group of Energy Materials (GEM), École Polytechnique Fédérale de Lausanne (EPFL), Sion, Switzerland
    Federico SMEACETTO, Department of Applied Science and Technology, Politecnico di Torino, Torino, Italy, Torino, Italy

    person_pinSamaneh DAVIRAN, Group of Energy Materials (GEM), École Polytechnique Fédérale de Lausanne (EPFL), Sion, Switzerland
    12:00 - 12:15 | Hybrid multimaterial 3D printing of complete Solid Oxide CellsNatalia KOSTRETSOVA, Catalonia Institute for Energy Research (IREC), Sant Adrìa del Besòs, Barcelona, Spain
    Simone ANELLI, Politecnico di Torino, Turin, Italy
    Marc NUÑEZ, Catalonia Institute for Energy Research (IREC), Sant Adrìa del Besòs, Barcelona, Spain
    Arianna PESCE, Catalonia Institute for Energy Research (IREC), Sant Adrìa del Besòs, Barcelona, Spain
    Alex MORATA, Catalonia Institute for Energy Research (IREC), Sant Adrìa del Besòs, Barcelona, Spain
    Federico SMEACETTO, Politecnico di Torino, Turin, Italy
    Marc TORRELL, Catalonia Institute for Energy Research (IREC), Sant Adrìa del Besòs, Barcelona, Spain
    Albert TARANCÓN,

    person_pinNatalia KOSTRETSOVA, Catalonia Institute for Energy Research (IREC), Sant Adrìa del Besòs, Barcelona, Spain
    12:15 - 12:30 | The impact of solvents on wet-chemical processing of sulfide-based solid electrolytesAlexander BEUTL, AIT Austrian Institute of Technology GmbH, Center for Low-Emission Transport, Battery Technologies, Vienna, Austria
    Artur TRON, AIT Austrian Institute of Technology GmbH, Center for Low-Emission Transport, Battery Technologies, Vienna, Austria

    person_pinAlexander BEUTL, AIT Austrian Institute of Technology GmbH, Center for Low-Emission Transport, Battery Technologies, Vienna, Austria
    12:30 - 12:45 | Designed Lanthanum Nickelates as Oxygen Electrodes for Solid Oxide Cells by Electrostatic Spray DepositionMichael SPANN,
    Lydia YEFSAH,
    Marlu César STEIL, Univ. Grenoble Alpes, Univ. Savoie Mont Blanc, CNRS, Grenoble INP, LEPMI, 38000 Grenoble, France
    Laurent DESSEMOND, Univ. Grenoble Alpes, Univ. Savoie Mont Blanc, CNRS, Grenoble INP, LEPMI, 38000 Grenoble, France
    Jérôme LAURENCIN, Univ. Grenoble Alpes, CEA, LITEN, DTCH, 38054 Grenoble, France
    Elisabeth DJURADO, Univ. Grenoble Alpes, Univ. Savoie Mont Blanc, CNRS, Grenoble INP, LEPMI, 38000 Grenoble, France

    person_pinMichael SPANN, Univ. Grenoble Alpes, Univ. Savoie Mont Blanc, CNRS, Grenoble INP, LEPMI, 38000 Grenoble, France; Univ. Grenoble Alpes, CEA, LITEN, DTCH, 38054 Grenoble, France
    11:00 - 11:15 | Optimizing PVDF-based materials for multiphysic energy harvesting  Matthieu FRICAUDET, SPMS - CentraleSupelec - Université Paris-Saclay, Gif-Sur-Yvette, France
    Samir SALMANOV, Jozef Stefan Institut, Ljubljana, Slovenia
    Maja KOBLAR, Jozef Stefan Institut, Ljubljana, Slovenia
    Tadej ROJAC, Jozef Stefan Institut, Ljubljana, Slovenia
    Katarina ZIBERNA, Jozef Stefan Institut, Ljubljana, Slovenia
    Mojca OTONICAR, Jozef Stefan Institut, Ljubljana, Slovenia
    Thierry MARTIN, SPMS - CentraleSupelec - Université Paris-Saclay, Gif-Sur-Yvette, France
    Delong HE, LMPS - Université Paris-Saclay, Gif-Sur-Yvette, France
    Brahim DKHIL, SPMS - CentraleSupelec - Université Paris-Saclay, Gif-Sur-Yvette, France
    Pierre-Eymeric JANOLIN, SPMS - CentraleSupelec - Université Paris-Saclay, Gif-Sur-Yvette, France
    Andraz BRADESKO, SPMS - CentraleSupelec - Université Paris-Saclay, Gif-Sur-Yvette, France

    person_pinMatthieu FRICAUDET, SPMS - CentraleSupelec - Université Paris-Saclay, Gif-Sur-Yvette, France
    11:15 - 11:30 | Ultrafast synthesis of multifunctional metal chalcogenides for energy applicationsMarta María GONZÁLEZ BARRIOS, Inorganic Chemistry Department, Universidad Complutense de Madrid, Madrid, Spain
    Óscar JUAN DURÁ , Applied Physics Department Universidad de Castilla—La Mancha, Ciudad Real, Spain
    Elizabeth CASTILLO MARTÍNEZ , Inorganic Chemistry Department, Universidad Complutense de Madrid, Madrid, Spain
    David ÁVILA BRANDE, Inorganic Chemistry Department, Universidad Complutense de Madrid, Madrid, Spain
    Jesús PRADO GONJAL , Inorganic Chemistry Department, Universidad Complutense de Madrid, Madrid, Spain

    person_pinMarta María GONZÁLEZ BARRIOS, Inorganic Chemistry Department, Universidad Complutense de Madrid, Madrid, Spain
    11:30 - 11:45 | Thin-film capability of commercial LTCCSophie BRESCH, Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin, Germany
    Patrick HÖHNE, Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin, Germany
    Ralf KOPPERT, Siegert Thinfilm Technology GmbH, Hermsdorf, Germany
    Björn MIELLER, Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin, Germany

    person_pinSophie BRESCH, Bundesanstalt für Materialforschung und -prüfung (BAM), Berlin, Germany
    11:45 - 12:00 | CuSx Catalysts for Electrochemical Reduction of Sulfur-Containing CO2 Gas to HCOOHJin Wook LIM, POSTECH, POHANG, Korea (Republic of)
    Wan Jae DONG, POSTECH, POHANG, Korea (Republic of)
    Won Seok CHO, POSTECH, POHANG, Korea (Republic of)
    Jong-Lam LEE, POSTECH, POHANG, Korea (Republic of)

    person_pinJong-Lam LEE, POSTECH, POHANG, Korea (Republic of)
    12:00 - 12:15 | Thermal conductivity of thermal interface materials having freeze granulated MgO fillersHyojung CHO, Yeungnam university, Gyeongsan, Korea (Republic of)
    Rokhyeon KIM, Yeungnam university, Gyeongsan, Korea (Republic of)
    Haewon JUNG, Yeungnam university, Gyeongsan, Korea (Republic of)
    Joo-Hwan HAN, Yeungnam university, Gyeongsan, Korea (Republic of)
    In Chul JUNG, soul material, Gyeongsan, Korea (Republic of)
    Jungho RYU, Yeungnam university, Gyeongsan, Korea (Republic of)

    person_pinHyojung CHO, Yeungnam university, Gyeongsan, Korea (Republic of)
    11:00 - 11:15 | Core-shell microparticles based on dually substituted biomimetic apatites: from synthesis to bone repair applicationsEdoardo CIANFLONE,
    Christope DROUET, CIRIMAT, Université de Toulouse, CNRS, INP- ENSIACET, 31030, Toulouse, France
    Sanjana VIG,
    David GROSSIN, CIRIMAT, Université de Toulouse, CNRS, INP- ENSIACET, 31030, Toulouse, France
    Jérèmy SOULIÉ, CIRIMAT, Université de Toulouse, CNRS, INP- ENSIACET, 31030, Toulouse, France
    Lamborghini SOTELO,
    Silke CHRISTIANSEN,
    Maria Helena FERNANDES,
    Fabien BROUILLET, CIRIMAT, Université de Toulouse, CNRS, UT3 Paul Sabatier, 31062, Toulouse, France

    person_pinEdoardo CIANFLONE, CIRIMAT, Université de Toulouse, CNRS, INP- ENSIACET, 31030, Toulouse, France; CIRIMAT, Université de Toulouse, CNRS, UT3 Paul Sabatier, 31062, Toulouse, France
    11:15 - 11:30 | Controlled Delivery of Dexamethasone from Nanostructured Hydroxyapatite-Chitosan Spraydried GranulesMikalai ZHUK, Department of Materials and Ceramic Engineering/CICECO, University of Aveiro, AVEIRO, Portugal
    Maria Elisabete VIEIRA COSTA, Department of Materials and Ceramic Engineering/CICECO, University of Aveiro, AVEIRO, Portugal
    Margarida ALMEIDA, Department of Materials and Ceramic Engineering/CICECO, University of Aveiro, AVEIRO, Portugal

    person_pinMargarida ALMEIDA, Department of Materials and Ceramic Engineering/CICECO, University of Aveiro, AVEIRO, Portugal
    11:30 - 11:45 | Functionalization of hydroxyapatite porous bioceramics: Study of vancomycin delivery kinetic  Antoine RECORDA, Institut de Recherche sur les Céramiques, UMR CNRS 7315, Limoges, France
    Cynthia ABANE, CHU de Limoges, Limoges, France
    Emeline RENAUDIE, Institut de Recherche sur les Céramiques, UMR CNRS 7315, Limoges, France
    Patricia PASCAUD MATHIEU, Institut de Recherche sur les Céramiques, UMR CNRS 7315, Limoges, France
    Karine GIRY, Institut de Recherche sur les Céramiques, UMR CNRS 7315, Limoges, France
    Sylvie DELEBASSEE, LABCIS, UR 22722, Limoges, France
    Amandine MAGNAUDEIX, Institut de Recherche sur les Céramiques, UMR CNRS 7315, Limoges, France
    Betty LAVERDET, Institut de Recherche sur les Céramiques, UMR CNRS 7315, Limoges, France
    Chantal DAMIA, Institut de Recherche sur les Céramiques, UMR CNRS 7315, Limoges, France

    person_pinAntoine RECORDA, Institut de Recherche sur les Céramiques, UMR CNRS 7315, Limoges, France
    11:45 - 12:00 | Highly porous Ag- and/or Ti-doped calcium phosphates bioceramic scaffolds: from physicochemical to biological propertiesLiga STIPNIECE,
    Ingus SKADINS,
    Dagnija LOCA,

    person_pinLiga STIPNIECE, Rudolfs Cimdins Riga Biomaterials Innovations and Development Centre, Institute of General Chemical Engineering, Faculty of Materials Science and Applied Chemistry, Riga Technical University, Riga, Latvia; Baltic Biomaterials Centre of Excellence, Headquarters at Riga Technical University, Riga, Latvia
    12:00 - 12:15 | In-vitro activity of borosilicate bioactive glasses for bone regenerationMarcela ARANGO OSPINA, Institute of Biomaterials, University of Erlangen-Nuremberg, Erlangen, Germany
    Fabian WESTHAUSER, Center for Orthopedics, Trauma Surgery and Spinal Cord Injury, Heidelberg University Hospital, Heidelberg, Germany
    Aldo R. BOCCACCINI, Institute of Biomaterials, University of Erlangen-Nuremberg, Erlangen, Germany

    person_pinMarcela ARANGO OSPINA, Institute of Biomaterials, University of Erlangen-Nuremberg, Erlangen, Germany
    12:15 - 12:30 | Sodium-free fluoride- and copper-doped bioactive glass containing zein coatings for biomedical applications?Zoya HADZHIEVA, Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen, Germany
    Katarzyna CHOLEWA-KOWALSKA, Faculty of Materials Science and Ceramics, AGH University of Science and Technology, Krakow, Poland
    Tomasz MOSKALEWICZ, Faculty of Metals Engineering and Industrial Computer Science, AGH University of Science and Technology, Krakow, Poland
    Ivo DLOUHY, Faculty of Mechanical Engineering, Brno University of Technology, Brno, Czechia
    Aldo R. BOCCACCINI, Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen, Germany

    person_pinZoya HADZHIEVA, Friedrich-Alexander-Universität Erlangen-Nürnberg, Erlangen, Germany
    11:00 - 11:15 | Achieving near-zero sintering shrinkage in pottery through anorthite crystallizationInada MIKI, Kyushu University, Fukuoka, Japan
    Shiraishi ATSUNORI, Saga Ceramics Research Laboratory, Saga, Japan
    Hao DONG, Saga University, Saga, Japan
    Akatsu TAKASHI, Tokyo University of Technology, Tokyo, Japan
    Kamochi NOBUAKI, Saga Ceramics Research Laboratory, Saga, Japan

    person_pinHao DONG, Saga University, Saga, Japan
    11:15 - 11:30 | The role of fluxes in the development of high-strength ceramicsElisa RAMBALDI, ITALCER GROUP, RUBIERA (RE), Italy

    person_pinElisa RAMBALDI, ITALCER GROUP, RUBIERA (RE), Italy
    11:30 - 11:45 | Preparation of Frit-Free Ceramic Engobes and Glazes using Various Combinations of Natural and Recycled Raw MaterialsMarco VACCHI,
    Lincy VARGHESE,
    Cristina SILIGARDI,

    person_pinLincy VARGHESE, Department of Engineering “Enzo Ferrari", University of Modena and Reggio Emilia, Via Pietro Vivarelli 10, 41125, Modena, Italy; National Interuniversity Consortium of Materials Science and Technology (INSTM), Via G. Giusti 9, 50121 , Florence, Italy
    11:45 - 12:00 | THE EFFECT OF BLUNGER SELECTION ON POST-FIRING PROPERTIES OF ILGIN CLAYS IN CERAMIC PRODUCTIONSengül Can GENC,
    Kagan KAYACI, Kale Seramik Çanakkale Kalebodur Seramik San. A.Ş., Çanakkale, Turkey
    Ugur TASKIRAN, Kale Seramik Çanakkale Kalebodur Seramik San. A.Ş., Çanakkale, Turkey
    Yildiz YILDIRIM, Kale Seramik Çanakkale Kalebodur Seramik San. A.Ş., Çanakkale, Turkey

    person_pinSengül Can GENC, Kale Seramik Çanakkale Kalebodur Seramik San. A.Ş., Çanakkale, Turkey; İstanbul Technical University, İstanbul, Turkey
    12:00 - 12:15 | Use of Turkish clays to produce Ukrainian clay-free porcelain tile compositionsEnrique SANCHEZ, Instituto Universitario Tecnología Cerámica-Universidad Jaume I, Castellón, Spain
    Vicente SANZ, Instituto Universitario Tecnología Cerámica-Universidad Jaume I, Castellón, Spain
    Javier CASTELLANO, Instituto Universitario Tecnología Cerámica-Universidad Jaume I, Castellón, Spain
    Kagan KAYACI, Kaleseramik Canakkale Kalebodur, Çan, Turkey
    Ugur TASKIRAN, Kaleseramik Canakkale Kalebodur, Çan, Turkey
    Senay TURK, Kaleseramik Canakkale Kalebodur, Çan, Turkey

    person_pinEnrique SANCHEZ, Instituto Universitario Tecnología Cerámica-Universidad Jaume I, Castellón, Spain
    12:15 - 12:30 | Assessment of a testing protocol for glazes characterization in view of their use on ceramic tilesRiccardo FABRIS, Department of Civil, Chemical, Environmental & Materials Engineering (DICAM) University of Bologna, via Terracini 28, 40131, Bologna, Italy
    Giulia MASI, Department of Civil, Chemical, Environmental & Materials Engineering (DICAM) University of Bologna, via Terracini 28, 40131, Bologna, Italy
    Denia MAZZINI, Colorobbia Italia S.P.A., Via Bucciardi, 37, 41042, Modena, Fiorano Modenese, Italy
    Maria Chiara BIGNOZZI, Department of Civil, Chemical, Environmental & Materials Engineering (DICAM) University of Bologna, via Terracini 28, 40131, Bologna, Italy

    person_pinRiccardo FABRIS, Department of Civil, Chemical, Environmental & Materials Engineering (DICAM) University of Bologna, via Terracini 28, 40131, Bologna, Italy
    12:30 - 12:45 | Use of hydrophobic inkjet inks to obtain reliefs in the glaze coatVicente SANZ, ITC - Universidad Jaume I, Castellón, Spain
    Enrique SANCHEZ, ITC - Universidad Jaume I, Castellón, Spain
    Kagan KAYACI, Kaleseramik, Can, Turkey
    Ugur TASKIRAN, Kaleseramik, Can, Turkey
    Berkay YAZIRLI, Kaleseramik, Can, Turkey

    person_pinVicente SANZ, ITC - Universidad Jaume I, Castellón, Spain
    12:45 - 13:00 | Effect of pigment micronization on microstructure, phase composition and colour evolutionChiara MOLINARI, CNR - ISSMC, Faenza, Italy
    Matteo ARDIT, Physics and Earth Sciences Department, University of Ferrara, Ferrara, Italy
    Daniele VERUCCHI, INCO Industria Colori S.p.A, Pavullo, Italy
    Alice TINTORRI, INCO Industria Colori S.p.A, Pavullo, Italy
    Michela MIGLIORI, INCO Industria Colori S.p.A, Pavullo, Italy
    Tanya TOSCHI, INCO Industria Colori S.p.A, Pavullo, Italy
    Guia GUARINI, CNR - ISSMC, Faenza, Italy
    Sonia CONTE, CNR - ISSMC, Faenza, Italy
    Giuseppe CRUCIANI, Physics and Earth Sciences Department, University of Ferrara, Ferrara, Italy
    Michele DONDI, CNR - ISSMC, Faenza, Italy
    Chiara ZANELLI, CNR - ISSMC, Faenza, Italy

    person_pinChiara MOLINARI, CNR - ISSMC, Faenza, Italy
    11:00 - 11:15 | Applications of X-ray refraction techniques to non-destructive characterization of ceramics and compositesGiovanni BRUNO, BAM, Bundesanstalt für Materialforschung und -prüfung, Berlin, Germany
    Bernd R. MÜLLER, BAM, Bundesanstalt für Materialforschung und -prüfung, Berlin, Germany
    Andreas KUPSCH, BAM, Bundesanstalt für Materialforschung und -prüfung, Berlin, Germany
    Itziar SERRANO-MUNOZ, BAM, Bundesanstalt für Materialforschung und -prüfung, Berlin, Germany

    person_pinGiovanni BRUNO, BAM, Bundesanstalt für Materialforschung und -prüfung, Berlin, Germany
    11:15 - 11:30 | Thermal expansion anisotropy in ceramics probed by in situ synchrotron X-ray diffraction at the poly- and single crystal scalesDaniel FOWAN, Institut de Recherche sur les Matériaux Céramiques (IRCER)/Université de Limoges, Limoges, France
    Mossaab MOUIYA,
    Ravi PURUSHOTTAM RAJ PUROHI, CEA-IRIG-MEM-CNRS/Université de Grenoble Alpes, Grenoble, France
    Jean-Sébastien MICHA, CEA-IRIG-MEM-CNRS/Université de Grenoble Alpes, Grenoble, France
    Gilbert CHAHINE, CEA-IRIG-MEM-CNRS/Université de Grenoble Alpes, Grenoble, France
    Nils BLANC, CNRS-Institut Néel/Université de Grenoble Alpes, Grenoble, France
    Olivier CASTELNAU, PIMM, ENSAM, CNAM, HESAM, Paris, France
    E. THUNE, Institut de Recherche sur les Matériaux Céramiques (IRCER)/Université de Limoges, Limoges, France
    R. GUINEBRETIERE, CEA-IRIG-MEM-CNRS/Université de Grenoble Alpes, Grenoble, France

    person_pinDaniel FOWAN, Institut de Recherche sur les Matériaux Céramiques (IRCER)/Université de Limoges, Limoges, France
    11:30 - 11:45 | Operando and ex situ structural investigations of high entropy oxides as electrodes for Li-ion batteriesMartina FRACCHIA,
    Mauro CODURI,
    Daniele CALLEGARI,
    Eliana QUARTARONE,
    Umberto ANSELMI TAMBURINI,
    Paolo GHIGNA,

    person_pinMartina FRACCHIA, University of Pavia, Via Taramelli 12, Pavia, Italy; INSTM, National Inter-University Consortium for Materials Science and Technology, Via G. Giusti 9, Florence, Italy
    11:45 - 12:00 | High temperature phase transitions in ceramic materials studied by in situ 3D-reciprocal space mapping at the ESRFRené GUINEBRETIÈRE, IRCER, Université de Limoges, Limoges, France
    R.r.p. PURUSHOTTAM RAJ PUROHIT, CEA, IRIG, Université Grenoble Alpes, Grenoble, France
    Daniel Pepin FOWAN, IRCER, Université de Limoges, Limoges, France
    Elsa THUNE, IRCER, Université de Limoges, Limoges, France
    Marc HUGER, IRCER, Université de Limoges, Limoges, France
    Stephan ARNAUD, Institut Néel, Université Grenoble Alpes, Grenoble, France
    Gilbert CHAHINE, SIMAP, Université Grenoble Alpes, Grenoble, France
    Nils BLANC, Institut Néel, Université Grenoble Alpes, Grenoble, France
    Nathalie BOUDET, Institut Néel, Université Grenoble Alpes, Grenoble, France
    Olivier CASTELNAU, PIMM, Paris, France

    person_pinRené GUINEBRETIÈRE, IRCER, Université de Limoges, Limoges, France
    12:00 - 12:15 | Characterising functional ceramics with sophisticated diffraction methodsManuel HINTERSTEIN,
    Lucas LEMOS DA SILVA,
    Andrew STUDER, Australian Nuclear Science and Technology Organisation, Sydney, Australia

    person_pinManuel HINTERSTEIN, Fraunhofer IWM, Freiburg, Germany; Karlsruhe Institute of Technology, Karlsruhe, Germany
    12:15 - 12:30 | Grazing incidence Pair Distribution Function analysis of a metallic glassGwilherm NÉNERT, Malvern Panalytical, Almeo, Netherlands
    Milen GATESHKI, Malvern Panalytical, Almeo, Netherlands
    Loïc MAZÉ, Malvern Panalytical, Almeo, Netherlands
    Zhaohui BAO, Malvern Panalytical, Almeo, Netherlands

    person_pinZhaohui BAO, Malvern Panalytical, Almeo, Netherlands
    12:30 - 12:45 | Investigating Phase Transitions in La2NiO4+δ using in situ Raman SpectroscopyAdeel RIAZ, Univ. Grenoble Alpes, CNRS, Grenoble INP, LMGP, Grenoble, France
    Alexander STANGL, Univ. Grenoble Alpes, CNRS, Grenoble INP, LMGP, Grenoble, France
    Mónica BURRIEL, Univ. Grenoble Alpes, CNRS, Grenoble INP, LMGP, Grenoble, France
    Stephen SKINNER, Department of Materials, Imperial College London, Exhibition Road, London, United Kingdom
    Michel MERMOUX, Univ. Grenoble Alpes, Univ. Savoie Mont Blanc, CNRS, Grenoble INP, LEPMI, Grenoble, France

    person_pinAdeel RIAZ, Univ. Grenoble Alpes, CNRS, Grenoble INP, LMGP, Grenoble, France
    HL11:00 - 11:30 | A summary of CSIC- FUNGLASS collaboration on sol-gel coatingsAlicia DURAN, Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain
    Yolanda CASTRO, Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain

    person_pinAlicia DURAN, Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain
    11:30 - 11:45 | A smart integrated active anticorrosion system based on PEO process and cerium/silica sol-gel coatings on AZ31B Mg alloyEmilia MERINO, Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain
    Alicia DURÁN, Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain
    Yolanda CASTRO , Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain

    person_pinYolanda CASTRO , Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain
    11:45 - 12:00 | Plasma electrolytic oxide coatings on AZ31B alloy: impact of electrolyte composition on electrochemical and biological propertiesAshokraja CHANDRASEKAR, FunGlass – Centre for Functional and Surface Functionalized Glass Alexander Dubček University of Trenčín, Trenčín, Slovakia
    Emilia MERINO, Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain
    Amirhossein PAKSERESHT, FunGlass – Centre for Functional and Surface Functionalized Glass Alexander Dubček University of Trenčín, Trenčín, Slovakia
    DušAn GALUSEK,
    Alicia DURAN, Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain
    Yolanda CASTRO, Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain

    person_pinAshokraja CHANDRASEKAR, FunGlass – Centre for Functional and Surface Functionalized Glass Alexander Dubček University of Trenčín, Trenčín, Slovakia
    12:00 - 12:15 | Photodegradation of methyl orange using Ag nanoparticle doped ZnO thin films prepared by solgel dip coating method?Haritha AJITHA HARIDASAN, FunGlass – Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Trencin, Slovakia
    Alicia DURAN, Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain
    DušAn GALUSEK,
    José JOAQUÍN VELÁZQUEZ, FunGlass – Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Trencin, Slovakia
    Yolanda CASTRO, Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain

    person_pinHaritha AJITHA HARIDASAN, FunGlass – Centre for Functional and Surface Functionalized Glass, Alexander Dubček University of Trenčín, Trencin, Slovakia
    12:15 - 12:30 | Strengthening of transparent glass-ceramics: effects of glass composition and crystallizationAli TALIMIAN, Centre for Functional and Surface Functionalised Glass, Alexander Dubček University of Trenčín, Študentská 2, Trencin, Slovakia
    Dusan GALUSEK ,

    person_pinAli TALIMIAN, Centre for Functional and Surface Functionalised Glass, Alexander Dubček University of Trenčín, Študentská 2, Trencin, Slovakia
    14:30 - 14:45 | Innovative dynamic controls of mold temperature during ceramic injection molding for a better control of filling behaviorClaudio FERRARO, Ceramaret SA, Milvignes, Switzerland
    Tristan RÜEGER, iRAP, Institute for Applied Plastics Research, HEIA-FR (HES-SO), Fribourg, Switzerland
    Kay BEURET, Primaform AG Werkzeug und Formenbau, Thun, Switzerland
    Senad HASANOVIC, Ceramaret SA, Milvignes, Switzerland
    Bruno BÜRGISSER, iRAP, Institute for Applied Plastics Research, HEIA-FR (HES-SO), Fribourg, Switzerland

    person_pinClaudio FERRARO, Ceramaret SA, Milvignes, Switzerland
    14:45 - 15:00 | Mechanosynthesis route of europium doped strontium thiogallate for ion detection diagnosis in nuclear fusion reactorsMicaela VIDELA-TREVIN,
    Eleonora VIEZZER,
    Manuel GARCIA-MUNOZ,
    F. Javier FERRER,
    Krishnakumar BALU, Department of Engineering and Material Science and Transportation, Universidad de Sevilla, Seville, Spain
    Ranier SEPÚLVEDA, Department of Engineering and Material Science and Transportation, Universidad de Sevilla, Seville, Spain
    Ernesto CHICARDI, Department of Engineering and Material Science and Transportation, Universidad de Sevilla, Seville, Spain

    person_pinMicaela VIDELA-TREVIN, National Centre of Accelerators (CNA), Universidad de Sevilla, Seville, Spain; Department of Engineering and Material Science and Transportation, Universidad de Sevilla, Seville, Spain
    15:00 - 15:15 | Setting of mineral foams: reaction kinetics vs arrest of foam structure agingJoachim TROSSEILLE, Univ Lyon, Univ Claude Bernard Lyon 1, CNRS, Institut Lumière Matière, Villeurbanne, France
    Gérard PANCZER, Univ Lyon, Univ Claude Bernard Lyon 1, CNRS, Institut Lumière Matière, Villeurbanne, France
    Christine MARTINET, Univ Lyon, Univ Claude Bernard Lyon 1, CNRS, Institut Lumière Matière, Villeurbanne, France
    Marie LE MERRER, Univ Lyon, Univ Claude Bernard Lyon 1, CNRS, Institut Lumière Matière, Villeurbanne, France

    person_pinMarie LE MERRER, Univ Lyon, Univ Claude Bernard Lyon 1, CNRS, Institut Lumière Matière, Villeurbanne, France
    15:15 - 15:30 | Degradation of Y-TZP grinding media during wet milling:  effect of temperature and grinding chamber lining  Arthur PACQUELET,
    Vincent GARNIER, Université de Lyon, INSA de Lyon, Université Claude Bernard Lyon 1, CNRS, MATEIS, UMR5510, Lyon, France
    Laurent GREMILLARD, Université de Lyon, INSA de Lyon, Université Claude Bernard Lyon 1, CNRS, MATEIS, UMR5510, Lyon, France
    Jerome CHEVALIER, Université de Lyon, INSA de Lyon, Université Claude Bernard Lyon 1, CNRS, MATEIS, UMR5510, Lyon, France
    Nassira BENAMEUR, Saint-Gobain Research Provence, Cavaillon, France
    David BOUTTES, Saint-Gobain Research Provence, Cavaillon, France
    Marlin SAMUEL, Saint-Gobain Research Provence, Cavaillon, France
    Helen REVERON, Université de Lyon, INSA de Lyon, Université Claude Bernard Lyon 1, CNRS, MATEIS, UMR5510, Lyon, France

    person_pinArthur PACQUELET, Université de Lyon, INSA de Lyon, Université Claude Bernard Lyon 1, CNRS, MATEIS, UMR5510, Lyon, France; Saint-Gobain Research Provence, Cavaillon, France
    14:30 - 14:45 | Flash Sintering, A Novel Technique, For Manufacturing Surrogate And Active Nuclear MaterialsDavid PEARMAIN, Lucideon Ltd, Stoke on Trent, United Kingdom
    Samira BOSTANCHI, Lucideon Ltd, Stoke on Trent, United Kingdom
    Rob HARRISON, University of Manchester, Manchester, United Kingdom
    Christopher GREEN, Lucideon Ltd, Stoke on Trent, United Kingdom
    Dave GODDARD, National Nuclear Laboratory, Preston, United Kingdom
    Jonathan MORGAN, University of Manchester, Manchester, United Kingdom

    person_pinDavid PEARMAIN, Lucideon Ltd, Stoke on Trent, United Kingdom
    14:45 - 15:00 | Rapid densification kinetics of 3 mol% yttria-stabilized zirconia during current-surge stage of flash sinteringYiguang WANG, Beijing Institute of Technology, Beijing, China
    Ke REN, Beijing Institute of Technology, Beijing, China
    Dianguang LIU, Southwest Jiao tong University, Chengdu, China
    Jinling LIU, Southwest Jiao tong University, Chengdu, China

    person_pinYiguang WANG, Beijing Institute of Technology, Beijing, China
    15:00 - 15:15 | Investigating the microstructure and ballistic performance of strong B4C-TiB2 composites densified with Gas Pressure Sintering.Simone FAILLA, National Research Council - Institute of Science, Technology and Sustainability for Ceramics (CNR-ISSMC), Faenza, Italy
    Pietro GALIZIA, National Research Council - Institute of Science, Technology and Sustainability for Ceramics (CNR-ISSMC), Faenza, Italy
    Servet TURAN, Eskisehir Technical University, Department of Materials Science and Engineering, Eskisehir, Turkey
    Umut SAVACI, Eskisehir Technical University, Department of Materials Science and Engineering, Eskisehir, Turkey
    Diletta SCITI, National Research Council - Institute of Science, Technology and Sustainability for Ceramics (CNR-ISSMC), Faenza, Italy

    person_pinSimone FAILLA, National Research Council - Institute of Science, Technology and Sustainability for Ceramics (CNR-ISSMC), Faenza, Italy
    15:15 - 15:30 | Towards greener solvents for the functionalization and sintering of boron carbide ceramic powders with a preceramic polymerMarion WEISSENBERGER,
    Jérôme BRULIN, Saint-Gobain Ceramics, Niagara Falls, United States
    Laurent PIERROT, Saint-Gobain Research Provence, Cavaillon, France
    Romain LUCAS, Université de Limoges, IRCER CNRS UMR 7315, Limoges, France
    Nicolas PRADEILLES, Université de Limoges, IRCER CNRS UMR 7315, Limoges, France
    Alexandre MAÎTRE, Université de Limoges, IRCER CNRS UMR 7315, Limoges, France

    person_pinMarion WEISSENBERGER, Saint-Gobain Research Provence, Cavaillon, France; Université de Limoges, IRCER CNRS UMR 7315, Limoges, France
    15:30 - 15:45 | Densification of porous alumina prepared via freeze-casting with grain boundary segregation of impuritiesSang-Chae JEON, Changwon National University, Changwon , Korea (Republic of)
    Moon KYOUNG-SEOK , Gyeongsang National University, Jinju, Korea (Republic of)
    Lee HYUN-WOOK, Ulsan National Institute of Science & Technology (UNIST), Ulsan, Korea (Republic of)

    person_pinSang-Chae JEON, Changwon National University, Changwon , Korea (Republic of)
    HL14:30 - 15:00 | Development of inkjet printing to apply diffusion barrier layers in solid oxide cell applicationsSamaneh DAVIRAN,
    Paul BOWEN, Powder Technology Group (PTG), École Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland
    Jan VAN HERLE, Group of Energy Materials (GEM), École Polytechnique Fédérale de Lausanne (EPFL), Sion, Switzerland

    person_pinSamaneh DAVIRAN, Group of Energy Materials (GEM), École Polytechnique Fédérale de Lausanne (EPFL), Sion, Switzerland; Powder Technology Group (PTG), École Polytechnique Fédérale de Lausanne (EPFL), Lausanne, Switzerland
    15:00 - 15:15 | Development and adaptation of ceramic-based materials for additive manufacturing of sanitaryware prototypesM.pilar GOMEZ-TENA, ITC-AICE, Castellón, Spain
    Cristina FABUEL BARTUAL, ITC-AICE, Castellón, Spain
    Arnaldo MORENO BERTO, ITC-AICE, Castellón, Spain
    Fernando GONZÁLEZ-JUAREZ, ROCA SANITARIO, SA, Gava, Spain
    Verónica RICO-PEREZ, ROCA SANITARIO, SA, Gava, Spain
    Jordi BALCELLS VILLANUEVA, ROCA SANITARIO, SA, Gava, Spain

    person_pinM.pilar GOMEZ-TENA, ITC-AICE, Castellón, Spain
    15:15 - 15:30 | Direct ink writing of 3D coaxial ceramic/composite patterned architecturesLuis MORENO-SANABRIA, Institute of Ceramics and Glass - Spanish National Research Council (ICV-CSIC), Madrid, Spain
    María Isabel OSENDI, Institute of Ceramics and Glass - Spanish National Research Council (ICV-CSIC), Madrid, Spain
    Manuel BELMONTE, Institute of Ceramics and Glass - Spanish National Research Council (ICV-CSIC), Madrid, Spain
    Pilar MIRANZO, Institute of Ceramics and Glass - Spanish National Research Council (ICV-CSIC), Madrid, Spain

    person_pinLuis MORENO-SANABRIA, Institute of Ceramics and Glass - Spanish National Research Council (ICV-CSIC), Madrid, Spain
    15:30 - 15:45 | Study of rheological properties and printability criteria of alumina pastes for micro-extrusion processDelphine GOURDONNAUD, CNRS, Institute of Research for Ceramics (IRCER), UMR 7315, University of Limoges, European Ceramics Center, Limoges, France
    Julie BOURRET, CNRS, Institute of Research for Ceramics (IRCER), UMR 7315, University of Limoges, European Ceramics Center, Limoges, France
    Vincent PATELOUP, CNRS, Institute of Research for Ceramics (IRCER), UMR 7315, University of Limoges, European Ceramics Center, Limoges, France
    Thierry CHARTIER, CNRS, Institute of Research for Ceramics (IRCER), UMR 7315, University of Limoges, European Ceramics Center, Limoges, France
    Luc PICTON, Laboratoire Polymères, Biopolymères, Surfaces (PBS), UMR CNRS 6270, Normandie University, UNIROUEN, Mont-Saint-Aignan, France
    Vincent CHALEIX, Institut OmegaHealth, LABCiS – UR 22722, University of Limoges, Limoges, France
    Marguerite BIENIA, CNRS, Institute of Research for Ceramics (IRCER), UMR 7315, University of Limoges, European Ceramics Center, Limoges, France
    Pierre-Marie GEFFROY, CNRS, Institute of Research for Ceramics (IRCER), UMR 7315, University of Limoges, European Ceramics Center, Limoges, France

    person_pinJulie BOURRET, CNRS, Institute of Research for Ceramics (IRCER), UMR 7315, University of Limoges, European Ceramics Center, Limoges, France
    15:45 - 16:00 | Development of dense lithium disilicate glass-ceramics by Direct Ink Writing: Optimization of the post-processing parametersManuel ALVES, Department of Materials and Ceramic Engineering, CICECO - Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    Claudinei SANTOS, Faculty of Technology - Rio de Janeiro State University, Resende, Brazil
    Maria Helena FERNANDES, Department of Materials and Ceramic Engineering, CICECO - Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    Susana OLHERO, Department of Materials and Ceramic Engineering, CICECO - Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal

    person_pinManuel ALVES, Department of Materials and Ceramic Engineering, CICECO - Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    14:30 - 14:45 | Investigation of the dielectric properties of additive manufactured alumina ceramics  Alexander SCHUSTER, Hochschule Koblenz, Höhr-Grenzhausen, Germany
    Josef SCHULZ, Hochschule Koblenz, Höhr-Grenzhausen, Germany
    Zongwen FU, FGK , Höhr-Grenzhausen, Germany
    Antje LIERSCH, Hochschule Koblenz, Höhr-Grenzhausen, Germany

    person_pinAlexander SCHUSTER, Hochschule Koblenz, Höhr-Grenzhausen, Germany
    14:45 - 15:00 | Fabrication of Functional Ceramics by Additive Manufacturing combined with Colloidal AssemblyBenedikt WINHARD, Hamburg University of Technology, Institute of Advanced Ceramics, Integrated Materials Systems Group, Hamburg, Germany
    Laura G. MARAGNO, Hamburg University of Technology, Institute of Advanced Ceramics, Integrated Materials Systems Group, Hamburg, Germany
    Alberto GOMEZ-GOMEZ, Hamburg University of Technology, Institute of Advanced Ceramics, Integrated Materials Systems Group, Hamburg, Germany
    Julian KATZ, Hamburg University of Technology, Institute of Advanced Ceramics, Integrated Materials Systems Group, Hamburg, Germany
    Kaline P. FURLAN, Hamburg University of Technology, Institute of Advanced Ceramics, Integrated Materials Systems Group, Hamburg, Germany

    person_pinKaline P. FURLAN, Hamburg University of Technology, Institute of Advanced Ceramics, Integrated Materials Systems Group, Hamburg, Germany
    15:00 - 15:15 | CHARACTERIZATION OF NEW LiFePO4-BASED ELECTRODES FABRICATED BY FUSED FILAMENT DEPOSITIONJosé Miguel RAMOS FAJARDO, Renewable Energies Institute --- Castilla-La Mancha University, Albacete, Spain
    José Fernando VALERA JIMÉNEZ, Renewable Energies Institute --- Castilla-La Mancha University, Albacete, Spain
    Isabel María PELÁEZ TIRADO, Renewable Energies Institute --- Castilla-La Mancha University, Albacete, Spain
    Juan Ramón MARÍN RUEDA, Renewable Energies Institute --- Castilla-La Mancha University, Albacete, Spain
    Juan Carlos PÉREZ FLORES, Renewable Energies Institute --- Castilla-La Mancha University, Albacete, Spain
    Miguel CASTRO GARCÍA, Renewable Energies Institute --- Castilla-La Mancha University, Albacete, Spain
    Jesús CANALES VÁZQUEZ, Renewable Energies Institute --- Castilla-La Mancha University, Albacete, Spain

    person_pinJuan Carlos PÉREZ FLORES, Renewable Energies Institute --- Castilla-La Mancha University, Albacete, Spain
    15:15 - 15:30 | Multi-material design concepts for tailoring the structural integrity of 3D-printed alumina-based ceramicsJosef SCHLACHER, Department of Materials Science, Chair of Structural and Functional Ceramics, Montanuniversitaet Leoben, Leoben, Austria
    Sebastian GEIER, Lithoz GmbH, Vienna, Austria
    Anna-Katharina HOFER, Department of Materials Science, Chair of Structural and Functional Ceramics, Montanuniversitaet Leoben, Leoben, Austria
    Irina KRALEVA, Department of Materials Science, Chair of Structural and Functional Ceramics, Montanuniversitaet Leoben, Leoben, Austria
    Martin SCHWENTENWEIN, Lithoz GmbH, Vienna, Austria
    Raul BERMEJO, Department of Materials Science, Chair of Structural and Functional Ceramics, Montanuniversitaet Leoben, Leoben, Austria

    person_pinJosef SCHLACHER, Department of Materials Science, Chair of Structural and Functional Ceramics, Montanuniversitaet Leoben, Leoben, Austria
    15:30 - 15:45 | 3D printed mullite humidity sensorsYurii MILOVANOV,
    Arianna BERTERO, Politecnico di Torino, DISAT, Torino, Italy
    Bartolomeo COPPOLA, Politecnico di Torino, DISAT, Torino, Italy
    Paola PALMERO, Politecnico di Torino, DISAT, Torino, Italy
    Jean-Marc TULLIANI, Politecnico di Torino, DISAT, Torino, Italy

    person_pinJean-Marc TULLIANI, Politecnico di Torino, DISAT, Torino, Italy
    15:45 - 16:00 | A novel strength test for additively manufactured ceramicsMaximilian STAUDACHER, Montanuniversität Leoben, Department of Materials Science, Leoben, Austria
    Tanja LUBE, Montanuniversität Leoben, Department of Materials Science, Leoben, Austria
    Uwe SCHEITHAUER, Fraunhofer Institute for Ceramic Technologies and Systems IKTS, Dresden, Germany

    person_pinMaximilian STAUDACHER, Montanuniversität Leoben, Department of Materials Science, Leoben, Austria
    16:00 - 16:15 | Characterization of graphene-reinforced cordierite composites processed by additive manufacturingMaría GARCÍA-MARTÍNEZ, National Institute for Aerospace Technology (INTA), Torrejón de Ardoz, Spain
    Javier HIDALGO , University of Castilla La Mancha (UCLM). ETSII-INEI. DYPAM Research Group, Ciudad Real, Spain
    Beatriz GONZÁLEZ , National Institute for Aerospace Technology (INTA), Torrejón de Ardoz, Spain
    Juan Alfonso NARANJO , University of Castilla La Mancha (UCLM). ETSII-INEI. DYPAM Research Group, Ciudad Real, Spain
    Ana PASTOR , National Institute for Aerospace Technology (INTA), Torrejón de Ardoz, Spain
    Cristina BERGES , University of Castilla La Mancha (UCLM). ETSII-INEI. DYPAM Research Group, Ciudad Real, Spain
    M. Pilar VALLES , National Institute for Aerospace Technology (INTA), Torrejón de Ardoz, Spain
    Marta HERNÁNDEZ , National Institute for Aerospace Technology (INTA), Torrejón de Ardoz, Spain
    Eva MATEO , National Institute for Aerospace Technology (INTA), Torrejón de Ardoz, Spain
    Lorena ILLÁN , National Institute for Aerospace Technology (INTA), Torrejón de Ardoz, Spain
    Eduardo José CUETO , National Institute for Aerospace Technology (INTA), Torrejón de Ardoz, Spain
    Gemma HERRANZ, University of Castilla La Mancha (UCLM). ETSII-INEI. DYPAM Research Group, Ciudad Real, Spain

    person_pinMaría GARCÍA-MARTÍNEZ, National Institute for Aerospace Technology (INTA), Torrejón de Ardoz, Spain
    HL14:30 - 15:00 | Architectured Ceramics: Engineered Toughening MechanismsHamidreza YAZDANI, National Research Council Canada, Montreal, Canada
    David BACKMAN, National Research Council Canada, Ottawa, Canada
    Marc GENEST, National Research Council Canada, Ottawa, Canada
    Behnam ASHRAFI, National Research Council Canada, Montreal, Canada

    person_pinBehnam ASHRAFI, National Research Council Canada, Montreal, Canada
    15:00 - 15:15 | Understanding the fracture behaviour of tough alumina-based ceramic inspired by nacreVictoria VILCHEZ , Centre for Advanced Structural Ceramics, Imperial Colleg London, London, United Kingdom
    Pedro Ivo PELISSARI, Materials Engineering Department, Federal University of São Carlos, São Carlos, Brazil
    Victor PANDOLFELLI, Materials Engineering Department, Federal University of São Carlos, São Carlos, Brazil
    Shelley RAWSON, Henry Royce Institute, Department of Materials, University of Manchester, Manchester, United Kingdom
    Philip WITHERS, Henry Royce Institute, Department of Materials, University of Manchester, Manchester, United Kingdom
    Florian BOUVILLE, Centre for Advanced Structural Ceramics, Imperial Colleg London, London, United Kingdom

    person_pinFlorian BOUVILLE, Centre for Advanced Structural Ceramics, Imperial Colleg London, London, United Kingdom
    15:15 - 15:30 | Accounting for anisotropy in nacre-like aluminaThomas DUMINY, Mateis - INSA Lyon, Lyon, France
    Aurélien DOITRAND, Mateis - INSA Lyon, Lyon, France
    Sylvain MEILLE, Mateis - INSA Lyon, Lyon, France

    person_pinThomas DUMINY, Mateis - INSA Lyon, Lyon, France
    15:30 - 15:45 | Computational Design of Double-Tough Bio-inspired Ceramics with the Phase Transformation TougheningJian ZHANG, Eindhoven University of Technology, Eindhoven, Netherlands
    Francesco AIELLO, Eindhoven University of Technology, Eindhoven, Netherlands
    Mauro SALAZAR, Eindhoven University of Technology, Eindhoven, Netherlands
    Diletta GIUNTINI, Eindhoven University of Technology, Eindhoven, Netherlands

    person_pinJian ZHANG, Eindhoven University of Technology, Eindhoven, Netherlands
    15:45 - 16:00 | Bio-inspired nacre-like zirconia/PMMA composite for dental CAD/CAM restorationHuijun SUN, University of Bristol, Bristol, United Kingdom
    Parinaz TABRIZIAN, University of Bristol, Bristol, United Kingdom
    Aqsa QAMBRANI, University of Surrey, Guilford , United Kingdom
    Urangua JARGALSAIKHAN, University of Surrey, Guilford , United Kingdom
    Tan SUI, University of Surrey, Guilford , United Kingdom
    Tony IRELAND, University of Bristol, Bristol, United Kingdom
    Bo SU, University of Bristol, Bristol, United Kingdom

    person_pinHuijun SUN, University of Bristol, Bristol, United Kingdom
    16:00 - 16:15 | Lamination of transparent spinel ceramic by organic adhesive  Sabine BEGAND, Fraunhofer IKTS, Hermsdorf, Germany
    Ralph SCHUBERT, Fraunhofer IKTS, Hermsdorf, Germany
    Thomas GRAU, Fraunhofer IKTS, Hermsdorf, Germany
    Jörg TÖPFER, Ernst-Abbe-Hochschule, University of Applied Science, Jena, Germany

    person_pinSabine BEGAND, Fraunhofer IKTS, Hermsdorf, Germany
    16:15 - 16:30 | Selectively powder deposition and FAST sintering of multi-material components.Bram NEIRINCK, Aerosint SA, Herstal, Belgium
    Margherita BERETTA,
    Shuigen HUANG, KULeuven, Department of Materials Engineering, Leuven, Belgium
    Annabel BRAEM, KULeuven, Department of Materials Engineering, Leuven, Belgium
    Jozef VLEUGELS, KULeuven, Department of Materials Engineering, Leuven, Belgium

    person_pinBram NEIRINCK, Aerosint SA, Herstal, Belgium
    14:30 - 14:45 | A chemometric approach to the study of the phase stability of the high entropy oxide (Mg,Co,Ni,Cu,Zn)Mauro CODURI,
    Lisa Rita MAGNAGHI,
    Martina FRACCHIA,
    Raffaela BIESUZ,
    Paolo GHIGNA,
    Umberto ANSELMI TAMBURINI,

    person_pinMauro CODURI, University of Pavia, Pavia, Italy; INSTM, Firenze, Italy
    14:45 - 15:00 | Charge transport properties of a new family of entropy stabilized A6B2O17 oxidesDaniel JAWORSKI, Institute of Nanotechnology and Materials Engineering, Gdańsk University of Technology, Gdańsk, Poland
    William F. ROSENBERG, Department of Chemical Engineering, University of California, Davis, United States
    Tadeusz MIRUSZEWSKI, Institute of Nanotechnology and Materials Engineering, Gdańsk University of Technology, Gdańsk, Poland
    Aleksandra MIELEWCZYK-GRYN, Institute of Nanotechnology and Materials Engineering, Gdańsk University of Technology, Gdańsk, Poland
    Maria GAZDA, Institute of Nanotechnology and Materials Engineering, Gdańsk University of Technology, Gdańsk, Poland
    Scott J. MCCORMACK, Department of Materials Science and Engineering, University of California, Davis, United States

    person_pinDaniel JAWORSKI, Institute of Nanotechnology and Materials Engineering, Gdańsk University of Technology, Gdańsk, Poland
    15:00 - 15:15 | High entropy perovskite ceramics prepared by alternative routesVasile-Adrian SURDU, Politehnica University of Bucharest, Bucharest, Romania
    Adrian Ionut NICOARA, Politehnica University of Bucharest, Bucharest, Romania
    Roxana PATRU, National Institue of Materials Physics, Bucharest, Romania
    Roxana TRU?C?, Politehnica University of Bucharest, Bucharest, Romania
    Ovidiu OPREA, Politehnica University of Bucharest, Bucharest, Romania
    Adelina IANCULESCU, Politehnica University of Bucharest, Bucharest, Romania

    person_pinVasile-Adrian SURDU, Politehnica University of Bucharest, Bucharest, Romania
    15:15 - 15:30 | High Entropy Materials for Memristive Switching Component Unit ApplicationCuo WU, Forschungszentrum Juelich, Juelich, Germany
    Christian PITHAN, Forschungszentrum Juelich, Juelich, Germany
    Vikas RANA, Forschungszentrum Juelich, Juelich, Germany
    Jürgen DORNSEIFFER, Forschungszentrum Juelich, Juelich, Germany
    Marc-Pascal ZAHLER , Forschungszentrum Juelich, Juelich, Germany
    Wolfgang RHEINHEIMER, Forschungszentrum Juelich, Juelich, Germany
    Jennifer RUPP, Technishe Universitaet Muenchen, Munich, Germany

    person_pinCuo WU, Forschungszentrum Juelich, Juelich, Germany
    15:30 - 15:45 | Structural and Functional Properties 8-component Equimolar “High Entropy” SpinelAnu MOHAN, Department of Metallurgical Engineering & Materials Science, Indian Institute of Technology Bombay, Mumbai, India
    Angshuman GUPTA, Department of Metallurgical Engineering & Materials Science, Indian Institute of Technology Bombay, Mumbai, India
    Ashutosh Suresh GANDHI, Department of Metallurgical Engineering & Materials Science, Indian Institute of Technology Bombay, Mumbai, India

    person_pinAnu MOHAN, Department of Metallurgical Engineering & Materials Science, Indian Institute of Technology Bombay, Mumbai, India
    15:45 - 16:00 | Macro-Equimolar High Entropy Oxide Perovskites with Low Thermal ConductivityImrongnaro LONGKUMER, IIT Bombay, Mumbai, India
    Harshad Udday GANDHE, IIT Bombay, Mumbai, India
    Ashutosh Suresh GANDHI, IIT Bombay, Mumbai, India

    person_pinImrongnaro LONGKUMER, IIT Bombay, Mumbai, India
    16:00 - 16:15 | Disorder effects on physical properties in complex oxidesShangxiong HUANGFU, Laboratory for High Performance Ceramics, Empa, Dubendorf, Switzerland
    Alexandra AUSTIN, Department of Earth Sciences, UCL, London, United Kingdom
    Zurab GUGUCHIA, Laboratory for Muon Spin Spectroscopy (LMU), Paul Scherrer Institute (PSI), Villigen, Switzerland
    Amy KNORPP, Laboratory for High Performance Ceramics, Empa, Dubendorf, Switzerland
    Jon BELL, ZHAW School of Engineering, Winterthur, Switzerland
    Michael STUER, Laboratory for High Performance Ceramics, Empa, Dubendorf, Switzerland

    person_pinShangxiong HUANGFU, Laboratory for High Performance Ceramics, Empa, Dubendorf, Switzerland
    14:30 - 14:45 | Carbon-free Cathode Materials based on Mn ceramic oxinitrides for Zn-oxygen aqueous BatteriesJorge GONZÁLEZ-MORALES, Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain
    Nataly- Carolina ROSERO NAVARRO, Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain
    Mario APARICIO, Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain
    Jadra MOSA, Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain

    person_pinJadra MOSA, Instituto de Cerámica y Vidrio (CSIC), Madrid, Spain
    14:45 - 15:00 | Phase transition to Ruddlesden-Popper layered perovskite under reductive atmosphere in Sr2Fe1.5Mo0.506-δ induced by La-dopingAgata DUCKA, Advanced Materials Center, Institute of Nanotechnology and Materials Engineering, Faculty of Applied Physics and Mathematics, Gdansk University of Technology, ul. G. Narutowicza 11/12, 80-233 Gdańsk, Poland
    Patryk BLASZCZAK, Advanced Materials Center, Institute of Nanotechnology and Materials Engineering, Faculty of Applied Physics and Mathematics, Gdansk University of Technology, ul. G. Narutowicza 11/12, 80-233 Gdańsk, Poland
    Jagoda BUDNIK, Advanced Materials Center, Institute of Nanotechnology and Materials Engineering, Faculty of Applied Physics and Mathematics, Gdansk University of Technology, ul. G. Narutowicza 11/12, 80-233 Gdańsk, Poland
    Sea-Fue WANG, Department of Materials and Mineral Resources Engineering, National Taipei University of Technology, 1, Sec. 3, Zhongxiao E. Rd., Taipei, Taiwan
    Beata BOCHENTYN, Advanced Materials Center, Institute of Nanotechnology and Materials Engineering, Faculty of Applied Physics and Mathematics, Gdansk University of Technology, ul. G. Narutowicza 11/12, 80-233 Gdańsk, Poland

    person_pinAgata DUCKA, Advanced Materials Center, Institute of Nanotechnology and Materials Engineering, Faculty of Applied Physics and Mathematics, Gdansk University of Technology, ul. G. Narutowicza 11/12, 80-233 Gdańsk, Poland
    HL14:30 - 15:00 | Silicon nitride – from inert to bioactive by surface modificationGuido Manuel DE LA TORRE OLVERA, Institute of Inorganic Chemistry of Slovak Academy of Sciences, Dúbravská cesta 9, 845 36 , Bratislava, Slovakia
    Martina LABUDOVÁ, Biomedical Research Center of the Slovak Academy of Sciences, Dúbravská cesta 9, 845 05 , Bratislava, Slovakia
    Michal HICÁK, Institute of Inorganic Chemistry of Slovak Academy of Sciences, Dúbravská cesta 9, 845 36 , Bratislava, Slovakia
    Miroslav HNATKO, Institute of Inorganic Chemistry of Slovak Academy of Sciences, Dúbravská cesta 9, 845 36 , Bratislava, Slovakia
    Pavol ŠAJGALÍK, Institute of Inorganic Chemistry of Slovak Academy of Sciences, Dúbravská cesta 9, 845 36 , Bratislava, Slovakia
    Monika TATARKOVÁ, Institute of Inorganic Chemistry of Slovak Academy of Sciences, Dúbravská cesta 9, 845 36 , Bratislava, Slovakia

    person_pinMonika TATARKOVÁ, Institute of Inorganic Chemistry of Slovak Academy of Sciences, Dúbravská cesta 9, 845 36 , Bratislava, Slovakia
    15:00 - 15:15 | Bone mechanobiological engineering with biomaterials: state of the art and perspectivesRémy GAUTHIER, MatéIS - INSA Lyon - CNRS - UCBL, Villeurbanne Cedex, France
    Sylvain MEILLE, MatéIS - INSA Lyon - CNRS - UCBL, Villeurbanne Cedex, France
    Laurent GREMILLARD, MatéIS - INSA Lyon - CNRS - UCBL, Villeurbanne Cedex, France
    Jérôme CHEVALIER, MatéIS - INSA Lyon - CNRS - UCBL, Villeurbanne Cedex, France

    person_pinRémy GAUTHIER, MatéIS - INSA Lyon - CNRS - UCBL, Villeurbanne Cedex, France
    15:15 - 15:30 | Cold sintering of amorphous calcium phosphate and low-crystalline apatite-biopolymer composites at room temperatureKristaps RUBENIS,
    Anna GALOTTA, Riga Technical University, Riga, Latvia
    Vita ZALITE,
    Janis LOCS,

    person_pinJanis LOCS, Riga Technical University, Riga, Latvia; Baltic Biomaterials Centre of Excellence, Riga, Latvia
    15:30 - 15:45 | Cold uniaxial direct compression of amorphous calcium phosphate  Sylvain LE GRILL, I2M, Bordeaux, France
    Fabien BROUILLET, I2M, Bordeaux, France
    Vincent MAZEL, CIRIMAT, Toulouse, France
    Ghislaine BERTRAND, I2M, Bordeaux, France
    Pierre TCHORELOFF,
    Pierre TCHORELOFF, CIRIMAT, Toulouse, France

    person_pinSylvain LE GRILL, I2M, Bordeaux, France
    15:45 - 16:00 | Direct Ink Writing of graphene reinforced calcium phosphate cements for bone tissue engineeringStephanie ROEDEL,
    Solène TADIER, INSA-Lyon, Villeurbanne, France
    Márcio FREDEL, UFSC, Florianópolis, Brazil
    Bruno HENRIQUES, UFSC, Florianópolis, Brazil
    Laurent GREMILLARD, INSA-Lyon, Villeurbanne, France

    person_pinStephanie ROEDEL, INSA-Lyon, Villeurbanne, France; UFSC, Florianópolis, Brazil
    16:00 - 16:15 | Impact of common ions on in vitro dissolution of bioactive glass S53P4Minna SIEKKINEN, Åbo Akademi University, Turku, Finland
    Markus ENGBLOM, Åbo Akademi University, Turku, Finland
    Leena HUPA, Åbo Akademi University, Turku, Finland

    person_pinMinna SIEKKINEN, Åbo Akademi University, Turku, Finland
    HL14:30 - 15:00 | Additive manufacturing of cementitious materials: high-performance building solutionFabien SANDRA, Holcim, Saint-Quentin Fallavier, France
    Loïc REGNAULT DE LA MOTHE, Holcim, Saint-Quentin Fallavier, France
    Marjorie CHANTIN, Holcim, Saint-Quentin Fallavier, France
    Bilal BAZ, Holcim, Saint-Quentin Fallavier, France
    Qing ZHANG, Holcim, Saint-Quentin Fallavier, France
    Christian BLACHIER, Holcim, Saint-Quentin Fallavier, France
    Hélène LOMBOIS-BURGER, Holcim, Saint-Quentin Fallavier, France

    person_pinFabien SANDRA, Holcim, Saint-Quentin Fallavier, France
    15:00 - 15:15 | Influence of Al (OH)3, Ca (OH)2 and Mg (OH)2 on the Physico-microstructral Properties of Laterite-Phosphate based GeomaterialsRodrigue Cyriaque KAZE , University of Yaoundé I, Yaounde, Cameroon

    person_pinRodrigue Cyriaque KAZE , University of Yaoundé I, Yaounde, Cameroon
    15:15 - 15:30 | Experimental analysis of the thermal properties of Lebanese Geopolymer Mortars embedded with Na and K-based alkali activators.Marianne SABA, University of Balamand, Civil Engineering Department, Kelhat, Lebanon
    Benoit NAIT-ALI, Université de Limoges, IRCER, , Limoges, France
    Joseph ABSI, Université de Limoges, IRCER, , Limoges, France

    person_pinMarianne SABA, University of Balamand, Civil Engineering Department, Kelhat, Lebanon
    15:30 - 15:45 | Enhancing the Upcycling of Soda-Lime Glass Waste in Alkali Activated MaterialsGiulia TAMENI, Department of Industrial Engineering, University of Padova, Padova, Italy
    Francesco CAMMELLI,
    Hamada ELSAYED,
    Anna MAZZI, Department of Industrial Engineering, University of Padova, Padova, Italy
    Salvatore GAZZO, Department of Civil Engineering and Architecture, University of Catania, Catania, Italy
    Loredana CONTRAFATTO, Department of Civil Engineering and Architecture, University of Catania, Catania, Italy
    Enrico BERNARDO,

    person_pinGiulia TAMENI, Department of Industrial Engineering, University of Padova, Padova, Italy
    15:45 - 16:00 | CO2 quantification methods for efficiency assessment of wet and semi-dry carbonation processes performed on steel slag samplesGiuseppe FERRARA, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
    Alberto BELLI, CRH Europe, Amsterdam, Netherlands
    Arno KEULEN, CRH Europe, Amsterdam, Netherlands
    Jean-Marc TULLIANI, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
    Paola PALMERO, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy

    person_pinGiuseppe FERRARA, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
    16:00 - 16:15 | CO2 sequestration of two industrial by-products through a slurry carbonation processFrancesca BONFANTE, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
    Giuseppe FERRARA, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
    Pedro HUMBERT, Innovation Centre for Sustainable Construction, CRH, 1083 HL, Amsterdam, Netherlands
    Jean-Marc TULLIANI, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy
    Paola PALMERO, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy

    person_pinFrancesca BONFANTE, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino, Torino, Italy

    descriptionPOSTERS

    S1-LP-283 - Effect of Microshaping Parameters on Mechanical Properties of Alumina CeramicsFabricio Eduardo BORTOT COELHO, Laboratory for High Performance Ceramics, Empa, Überlandstrasse 129, 8600 Dübendorf, Switzerland, Dübendorf, Switzerland
    Michael STUER, Laboratory for High Performance Ceramics, Empa, Überlandstrasse 129, 8600 Dübendorf, Switzerland, Dübendorf, Switzerland

    person_pinFabricio Eduardo BORTOT COELHO, Laboratory for High Performance Ceramics, Empa, Überlandstrasse 129, 8600 Dübendorf, Switzerland, Dübendorf, Switzerland
    S1-LP-281 - Exploring the boundaries of strength and toughness: AuerTec® 2Y-40AThomas BILLOVITS, Treibacher Industrie AG, Althofen, Austria
    Sandra DEMEL-ECKHART, Treibacher Industrie AG, Althofen, Austria

    person_pinThomas BILLOVITS, Treibacher Industrie AG, Althofen, Austria
    S1-LP-282 - Development of preceramic polymers as ceramic fiber precursors elaborated in the Si-B-Al-O-N systemBastien TOLVE GRANIER, IRCER, Limoges, France
    Sophie BEAUDET SAVIGNAT, CEA Le Ripault, Monts, France
    Patrick HOURQUEBIE, CEA Le Ripault, Monts, France
    Maxime CHEYPE, IRCER, Limoges, France
    Samuel BERNARD, IRCER, Limoges, France

    person_pinBastien TOLVE GRANIER, IRCER, Limoges, France
    S1-P001 - Obtaining eucryptite and spodumene-β at the nanometer scale by synthesis by heterocoagulation followed by reaction in solid stateJordana INOCENTE, Unesc - Universidade do Extremo Sul Catarinense, Criciúma , Brazil
    Sabrina ARCARO, Unesc - Universidade do Extremo Sul Catarinense, Criciúma , Brazil
    Oscar MONTEDO, Unesc - Universidade do Extremo Sul Catarinense, Criciúma , Brazil

    person_pinJordana INOCENTE, Unesc - Universidade do Extremo Sul Catarinense, Criciúma , Brazil
    S1-P002 - Debinding behaviors of silica green bodies photocured by hybridized interparticle crosslinksSayaka YAMADA, Yokohama National University, Yokohama, Japan
    Junichi TATAMI , Yokohama National University, Yokohama, Japan
    Motoyuki IIJIMA, Yokohama National University, Yokohama, Japan

    person_pinSayaka YAMADA, Yokohama National University, Yokohama, Japan
    S1-P003 - ZnO nanoparticles with enhanced photocatalytic efficiency produced in continuous flow supercritical water conditionsElena-Ecaterina TOMA,
    Giuseppe-Stefan STOIAN ,
    Simona Margareta COMAN, Department of Inorganic and Organic Chemistry, Biochemistry and Catalysis, Faculty of Chemistry, University of Bucharest, Regina Elisabeta Blvd., no. 4-12, 030016 Bucharest, Romania
    Florentina MAXIM, Laboratory of Chemical Thermodynamics, “Ilie Murgulescu” Institute of Physical Chemistry, Splaiul Independentei 202, 060021 Bucharest, Romania

    person_pinElena-Ecaterina TOMA, Laboratory of Chemical Thermodynamics, “Ilie Murgulescu” Institute of Physical Chemistry, Splaiul Independentei 202, 060021 Bucharest, Romania; Department of Inorganic and Organic Chemistry, Biochemistry and Catalysis, Faculty of Chemistry, University of Bucharest, Regina Elisabeta Blvd., no. 4-12, 030016 Bucharest, Romania
    S1-P004 -  CONTRIBUTION TO THE APPLICATION OF THE SHS SYNTHESIS TO PRODUCE CERAMIC AND COMPOSITE.  Françoise NARDOU, University of Limoges, Limoges, France

    person_pinFrançoise NARDOU, University of Limoges, Limoges, France
    S1-P005 - Co-synthesis of the magnetoelectric nanocomposite (1- x) (Na0.5Bi0.5)0.94Ba0.06TiO3 - xCoFe2O4 via polymeric precursor – PechiniGislayne Rayane ALVES DA SILVA, Federal University of São Carlos, São Carlos, Brazil
    Claudia Patricia FERNANDEZ PERDOMO, Federal University of São Carlos, São Carlos, Brazil
    Ruth KIMINAMI, Federal University of São Carlos, São Carlos, Brazil

    person_pinGislayne Rayane ALVES DA SILVA, Federal University of São Carlos, São Carlos, Brazil
    S1-P006 - Development of ATZ composites by Direct Ink Writing: impact of the ink´s stabilization route on the mechanical propertiesNarciso LÉVARO, University of Aveiro, Aveiro, Portugal
    Manuel ALVES, University of Aveiro, Aveiro, Portugal
    Claudinei SANTOS, Faculty of Technology - Rio de Janeiro State University, Resende, Brazil
    Vitor SENCADAS, University of Aveiro, Aveiro, Portugal
    Susana OLHERO, University of Aveiro, Aveiro, Portugal

    person_pinManuel ALVES, University of Aveiro, Aveiro, Portugal
    S1-P007 - In-situ OCT observation of freeze-drying behavior of Si3N4 slurry prepared with TBA and CH as dispersion mediumRiko YAMAZAKI, Yokohama National University, Yokohama, Japan
    Junichi TATAMI, Yokohama National University, Yokohama, Japan
    Motoyuki IIJIMA, Yokohama National University, Yokohama, Japan

    person_pinRiko YAMAZAKI, Yokohama National University, Yokohama, Japan
    S1-P008 - Low temperature ceramic post-processing of hollow-core photonic crystal fibersJenny JOUIN, Institut de Recherche sur les Céramiques (IRCER) UMR 7315 CNRS, Limoges, France
    Philippe THOMAS, Institut de Recherche sur les Céramiques (IRCER) UMR 7315 CNRS, Limoges, France
    Elodie DE SOUSA, Institut de Recherche sur les Céramiques (IRCER) UMR 7315 CNRS, Limoges, France
    Frédéric GÉRÔME, Gas-Phase Photonic and Microwave Materials (GPPMM) Xlim-UMR 7572 CNRS, Limoges, France
    Benoit DEBORD, Gas-Phase Photonic and Microwave Materials (GPPMM) Xlim-UMR 7572 CNRS, Limoges, France
    Thomas BILLOTTE, Gas-Phase Photonic and Microwave Materials (GPPMM) Xlim-UMR 7572 CNRS, Limoges, France
    Fetah BENABID, Gas-Phase Photonic and Microwave Materials (GPPMM) Xlim-UMR 7572 CNRS, Limoges, France
    Frédéric DELAHAYE, Glophotonics, Limoges, France
    Jérôme ALIBERT, Glophotonics, Limoges, France

    person_pinJenny JOUIN, Institut de Recherche sur les Céramiques (IRCER) UMR 7315 CNRS, Limoges, France
    S1-P009 - Internal structure evolution of Al2O3 slurry during slip casting by OCT in-situ observationMizuki IZAWA, Yokohama National University, Yokohama, Japan
    Junichi TATAMI, Yokohama National University, Yokohama, Japan
    Motoyuki IIJIMA, Yokohama National University, Yokohama, Japan

    person_pinMizuki IZAWA, Yokohama National University, Yokohama, Japan
    S1-P010 - Fabrication of wafer-thin, lead-free barium titanate piezoceramics by electrophoretic deposition on graphite electrodesInes KETTERER, Albert-Ludwigs-Universität Freiburg, Institut für Mikrosystemtechnik, Freiburg, Germany
    Cheng-Kang YANG, Albert-Ludwigs-Universität Freiburg, Institut für Mikrosystemtechnik, Freiburg, Germany
    Marco FREY, Albert-Ludwigs-Universität Freiburg, Institut für Mikrosystemtechnik, Freiburg, Germany
    Matthias WAPLER, Otto-von-Guericke-Universität Magdeburg, Fakultät für Elektrotechnik und Informationstechnik, Magdeburg, Germany
    Thomas HANEMANN,

    person_pinInes KETTERER, Albert-Ludwigs-Universität Freiburg, Institut für Mikrosystemtechnik, Freiburg, Germany
    S1-P011 - Elaboration of zirconia coatings at room temperature by Aerosol Deposition Method (ADM)Thomas PÈRE,
    Olivier DURAND, CTTC, Limoges, France
    Laurence BOYER, CTTC, Limoges, France
    Alain DENOIRJEAN, IRCER, Limoges, France
    Fabrice ROSSIGNOL, IRCER, Limoges, France

    person_pinOlivier DURAND, CTTC, Limoges, France
    S1-P012 - INVESTIGATION OF USAGE OPPORTUNITIES OF HALLOYSITE IN DIFFERENT INDUSTRYYildiz YILDIRIM, Kale Seramik Çanakkale Kalebodur Seramik San. A.Ş., Çanakkale, Turkey
    Çagdas ÖZDEN, Kale Seramik Çanakkale Kalebodur Seramik San. A.Ş., Çanakkale, Turkey
    Arife ÇIRPIN, Kale Seramik Çanakkale Kalebodur Seramik San. A.Ş., Çanakkale, Turkey
    Melek ÖZBILEN, Kale Seramik Çanakkale Kalebodur Seramik San. A.Ş., Çanakkale, Turkey

    person_pinÇagdas ÖZDEN, Kale Seramik Çanakkale Kalebodur Seramik San. A.Ş., Çanakkale, Turkey
    S1-P013 - Shaping porous ceramics using interparticle photo-cross-linkable w/o Pickering emulsions: the impacts of particle surface designYoshihiko YAMANOI, Yokohama National University, Yokohama, Japan
    Junichi TATAMI, Yokohama National University, Yokohama, Japan
    Motoyuki IIJIMA, Yokohama National University, Yokohama, Japan

    person_pinYoshihiko YAMANOI, Yokohama National University, Yokohama, Japan
    S1-P014 - Cold Sintering Process (CSP) for Dense Mixed Alkali Geopolymer: Preliminary StudyLorenzo LATTANZI, University of Padova, Padova, Italy
    Marco NARDONI, University of Padova, Padova, Italy
    Alberto CONTE, ITT Italia S.R.L., Barge (CN), Italy
    Agusti SIN, ITT Italia S.R.L., Barge (CN), Italy
    Paolo COLOMBO, University of Padova, Padova, Italy

    person_pinLorenzo LATTANZI, University of Padova, Padova, Italy
    S1-P016 - Controlling Degree of Inversion in MgFe2O4 Spinel Films Grown in External Magnetic FieldsZiyaad AYTUNA, University of Cologne, Institute of Inorganic Chemistry, Cologne, Germany
    Aman BHARDWAJ, PGI-6, Research Centre, Juelich, Juelich, Germany
    Michael WILHELM, University of Cologne, Institute of Inorganic Chemistry, Cologne, Germany
    Khan LÊ, University of Cologne, Institute of Inorganic Chemistry, Cologne, Germany
    Benjamin MAY, PGI-6, Research Centre, Juelich, Juelich, Germany
    David MÜLLER, PGI-6, Research Centre, Juelich, Juelich, Germany
    Sanjay MATHUR, University of Cologne, Institute of Inorganic Chemistry, Cologne, Germany

    person_pinZiyaad AYTUNA, University of Cologne, Institute of Inorganic Chemistry, Cologne, Germany
    S2-LP-285 - DOES FLASH SINTERING ALTER THE DEFORMATION MECHANISMS OF TUNGSTEN CARBIDE?Isacco MAZO,
    Miguel MONCLUS, IMDEA Materials Institute, Madrid, Spain
    Jon MOLINA-ALDAREGUIA, IMDEA Materials Institute, Madrid, Spain
    Vincenzo SGLAVO, University of Trento, Department of Industrial Engineering, Trento, Italy

    person_pinIsacco MAZO, University of Trento, Department of Industrial Engineering, Trento, Italy; ICA-IMT Mines Albi, Institut Clément Ader (ICA) , Albi, France
    S2-LP-284 - Modeling and simulation by discrete elements of the sintering of ceramic parts made by additive manufacturingAya BENJIRA, IRCER, LIMOGES, France
    Guy ANTOU, IRCER, LIMOGES, France
    Damien ANDRE, IRCER, LIMOGES, France
    Alexandre MAITRE, IRCER, LIMOGES, France

    person_pinAya BENJIRA, IRCER, LIMOGES, France
    S2-P017 - Formation of the Al2O3-based eutectic composite by a flash event and the microscopic deformation behavior Yuta AOKI, The University of Tokyo, Tokyo, Japan
    Hiroshi MASUDA, The University of Tokyo, Tokyo, Japan
    Hidehiro YOSHIDA, The University of Tokyo, Tokyo, Japan

    person_pinYuta AOKI, The University of Tokyo, Tokyo, Japan
    S2-P018 - Investigation of rapid densification mechanism in Ultra-fast high-temperature sinteringZonghao GUO, Oxford University, oxford, United Kingdom
    Richard TODD, Oxford University, oxford, United Kingdom

    person_pinZonghao GUO, Oxford University, oxford, United Kingdom
    S2-P019 - Sintered translucent ceramics of undoped and Nd3+-doped BaLaLiWO6 and BaLaNaWO6  perovskite-type tungstatesKacper PROKOP,
    Sandrine COTTRINO, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR 5510, 7 avenue Jean Capelle, 69621, Villeurbanne, Lyon, France
    Sylvie LE FLOCH, Univ Lyon, Institute Light Matter (iLM), UMR 5306 CNRS-Claude Bernard/Lyon1 University, 69622 Villeurbanne, Lyon, France
    Vincent GARNIER, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR 5510, 7 avenue Jean Capelle, 69621, Villeurbanne, Lyon, France
    Gilbert FANTOZZI, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR 5510, 7 avenue Jean Capelle, 69621, Villeurbanne, Lyon, France
    Yannick GUYOT, Univ Lyon, Institute Light Matter (iLM), UMR 5306 CNRS-Claude Bernard/Lyon1 University, 69622 Villeurbanne, Lyon, France
    Georges BOULON, Univ Lyon, Institute Light Matter (iLM), UMR 5306 CNRS-Claude Bernard/Lyon1 University, 69622 Villeurbanne, Lyon, France
    Malgorzata GUZIK,

    person_pinKacper PROKOP, University of Wroclaw, Faculty of Chemistry, ul. Joliot-Curie 14,50-383 , Wrocław, Poland; Łukasiewicz Research Network – PORT Polish Center for Technology Development, ul. Stabłowicka 147, 54-066 , Wrocław, Poland
    S2-P020 - Sintering investigation of a UO2 ceramic as a reference for a homogeneous MOX fuelKaythleen TORRENTE, CEA, Bagnols-sur-cèze , France
    Christelle DUGUAY, CEA, Saint-paul-lez-durance, France
    Franck DOREAU, CEA, Bagnols-sur-cèze , France
    Guillaume BERNARD-GRANGER, CEA, Bagnols-sur-cèze , France

    person_pinKaythleen TORRENTE, CEA, Bagnols-sur-cèze , France
    S2-P021 - REALIZATION OF COMPLEX ANATASE GEOMETRIES FOR WATER PURIFICATION COMBINING 3D PRINTING AND SPARK PLASMA SINTERING (SPS)Riccardo BRUCCULERI, Università di Pavia, Pavia, Italy
    Ivan BARISIC, University of Bath, Bath, United Kingdom
    Lorenzo AIROLDI, Università di Pavia, Pavia, Italy
    Primo BALDINI, Università di Pavia, Pavia, Italy
    Simone MORGANTI, Università di Pavia, Pavia, Italy
    Davide MATTIA, University of Bath, Bath, United Kingdom
    Ferdinando AURICCHIO, Università di Pavia, Pavia, Italy
    Umberto ANSELMI-TAMBURINI, Università di Pavia, Pavia, Italy

    person_pinRiccardo BRUCCULERI, Università di Pavia, Pavia, Italy
    S2-P023 - Cold sintering of SrTiO3[TiO2] Ceramic CompositesUgur KARTAL, Department of Materials Science and Engineering, Izmir Institute of Technology, Izmir, Turkey
    Levent KARACASULU, Department of Materials Science and Engineering, Izmir Institute of Technology, Izmir, Turkey
    Oyku ICIN, Department of Materials Science and Engineering, Izmir Institute of Technology, Izmir, Turkey
    Cekdar VAKIFAHMETOGLU, Department of Materials Science and Engineering, Izmir Institute of Technology, Izmir, Turkey

    person_pinUgur KARTAL, Department of Materials Science and Engineering, Izmir Institute of Technology, Izmir, Turkey
    S2-P024 - Synthesis of LiCoO2 cathode materials for Li-ion batteries at low temperaturesKe REN, Beijing Institute of Technology, Beijing, China
    Qiang ZUO, Zhengzhou University, Zhengzhou, China
    Wen LIU, Zhengzhou University, Zhengzhou, China
    Yanxia SU, Northwestern Polytechnical University, Xi'an, China
    Yiguang WANG, Beijing Institute of Technology, Beijing, China

    person_pinKe REN, Beijing Institute of Technology, Beijing, China
    S2-P025 - Densification of Hydroxyapatite powders by Cold Sintering Process: Influence of Particle Size, Acid Nature and ConcentrationMuthusundar KUMAR,
    Mohamed Aymen BEN ACHOUR, Université Polytechnique Hauts-de-France, INSA Hauts-de-France, CERAMATHS, F-59313, Valenciennes, France
    Marie LASGORCEIX, Université Polytechnique Hauts-de-France, INSA Hauts-de-France, CERAMATHS, F-59313, Valenciennes, France
    Paulo QUADROS, FLUIDINOVA S.A., Rua de Rosa Jacome Felguerias, 57, 4475-188, Maia, Portugal
    Rosica MINCHEVA, Laboratory of Polymeric and Composite Materials, Centre of Innovation and Research in Materials and polymers, University of Mons, Avenue Maistriau 19, Mons, Belgium
    Jean-Marie RAQUEZ, Laboratory of Polymeric and Composite Materials, Centre of Innovation and Research in Materials and polymers, University of Mons, Avenue Maistriau 19, Mons, Belgium
    Anne LERICHE, Université Polytechnique Hauts-de-France, INSA Hauts-de-France, CERAMATHS, F-59313, Valenciennes, France

    person_pinMuthusundar KUMAR, Laboratory of Polymeric and Composite Materials, Centre of Innovation and Research in Materials and polymers, University of Mons, Avenue Maistriau 19, Mons, Belgium; Université Polytechnique Hauts-de-France, INSA Hauts-de-France, CERAMATHS, F-59313, Valenciennes, France
    S2-P026 - Spontaneous Adsorption Effect of Carbon Nitride Nanosheets in the Yttria-stabilized Zirconia MicrobeadsDong-Won KIM, Research Institute for Green Energy Convergence Technology, Gyeongsang National University, Jinju, Korea (Republic of)
    Eun-Jeong KIM, Analysis Technical Center, Korea Institute of Ceramic Engineering and Technology, Jinju, Korea (Republic of)
    Kyoung-Seok MOON, Department of Materials Engineering and Convergence Technology, Gyeongsang National University, Jinju, Korea (Republic of)

    person_pinDong-Won KIM, Research Institute for Green Energy Convergence Technology, Gyeongsang National University, Jinju, Korea (Republic of)
    S3-LP-287 - Fabrication of transparent γ-alumina by 3D-printing based on combining sol-gel and photopolymerization processesMay Yam MOSHKOVITZ, The Hebrew University of Jerusalem, Jerusalem, Israel
    Shlomo MAGDASSI, The Hebrew University of Jerusalem, Jerusalem, Israel

    person_pinMay Yam MOSHKOVITZ, The Hebrew University of Jerusalem, Jerusalem, Israel
    S3-LP-286 - Ceramic parts printed by stereolithography: process through optimised post printing and debinding steps.Dominique HAUTCOEUR, Belgian Ceramic Research Centre, Mons, Belgium
    Geoffroy BISTER, Belgian Ceramic Research Centre, Mons, Belgium
    Laurent BOILET, Belgian Ceramic Research Centre, Mons, Belgium
    Nonna NURMI, Materials Science and Environmental Engineering Unit, Tampere University, , Tampere, Finland
    Erkki LEVÄNEN, Materials Science and Environmental Engineering Unit, Tampere University, , Tampere, Finland
    Erkka J. FRANKBERG, Materials Science and Environmental Engineering Unit, Tampere University, , Tampere, Finland

    person_pinDominique HAUTCOEUR, Belgian Ceramic Research Centre, Mons, Belgium
    S3-P027 - Structured NH3 sorbents fabricated by DIW of SrCl2 -based compositesAli EZZINE, University of Padova, Padova, Italy
    Marco D'AGOSTINI, University of Padova, Padova, Italy
    Nasir SHEZAD, Luleå University of Technology , Luleå, Sweden
    Paolo COLOMBO, University of Padova, Padova, Italy
    Farid AKHTAR, Luleå University of Technology , Luleå, Sweden
    Giorgia FRANCHIN, University of Padova, Padova, Italy

    person_pinAli EZZINE, University of Padova, Padova, Italy
    S3-P028 - Development of inks based on ceramic precursors of aluminium for Direct Ink WritingElena XURIGUERA, Universitat de Barcelona, Barcelona, Spain
    Jose Antonio PADILLA SÁNCHEZ,
    Pol BARCELONA, Universitat de Barcelona, Barcelona, Spain
    Mònica MARTÍNEZ LÓPEZ, Universitat de Barcelona, Barcelona, Spain
    Mercè SEGARRA, Universitat de Barcelona, Barcelona, Spain

    person_pinElena XURIGUERA, Universitat de Barcelona, Barcelona, Spain
    S3-P029 - Digital light processing of advanced ceramics: current investigations and perspectives at Politecnico di Torino  Bartolomeo COPPOLA, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino. , TORINO, Italy
    Elisa FIUME, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino. , TORINO, Italy
    Arianna BERTERO , INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino. , TORINO, Italy
    Barbara INSERRA, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino. , TORINO, Italy
    Laura MONTANARO, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino. , TORINO, Italy
    Jean-Marc TULLIANI, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino. , TORINO, Italy
    Paola PALMERO, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino. , TORINO, Italy

    person_pinBartolomeo COPPOLA, INSTM R.U. Lince Laboratory, Department of Applied Science and Technology (DISAT), Politecnico di Torino. , TORINO, Italy
    S3-P030 - Microwave debinding of ceramic parts shaped by stereolithographyFrançois VALDIVIESO, Laboratoire LGF, ST ETIENNE, France
    Clémence PETIT, Laboratoire LGF, ST ETIENNE, France
    Christophe MEUNIER, Laboratoire LGF, ST ETIENNE, France
    Justin CHASSAGNE, Laboratoire LGF, ST ETIENNE, France

    person_pinFrançois VALDIVIESO, Laboratoire LGF, ST ETIENNE, France
    S3-P031 - Near net shaping of ceramics by hybrid Additive Manufacturing & direct sinteringBram NEIRINCK, Aerosint SA, Herstal, Belgium
    Jean-Pierre ERAUW, Belgian Ceramic Research Centre, Mons, Belgium

    person_pinBram NEIRINCK, Aerosint SA, Herstal, Belgium
    S3-P032 - Development of Alumina Toughened Zirconia composites reinforced with carbon nanofibers for application as femoral headsVivian INÊS DOS SANTOS,
    Bruno HENRIQUES,
    Márcio CELSO FREDEL, Federal University of Santa Catarina, Florianópolis, Brazil
    Laurent GREMILLARD, INSA-Lyon, Villeurbanne, France

    person_pinLaurent GREMILLARD, INSA-Lyon, Villeurbanne, France
    S3-P034 - Effect of processing parameters in the properties and quality of alumina-based samples manufactured via digital light processingJhonata VERZA, Federal University of São Carlos, São Carlos, Brazil
    Ana Paula LUZ, Federal University of São Carlos, São Carlos, Brazil

    person_pinJhonata VERZA, Federal University of São Carlos, São Carlos, Brazil
    S3-P035 - 3D printed piezoelectric materials by binder jettingMarco MARIANI, DMEC-POLIMI, Milano, Italy
    Elisa MERCADELLI, CNR-ISSMC, Faenza, Italy
    Francesco BERTOLINI, DMEC-POLIMI, Milano, Italy
    Carlo BALDISSERRI, CNR-ISSMC, Faenza, Italy
    Nora LECIS, DMEC-POLIMI, Milano, Italy
    Carmen GALASSI,

    person_pinCarmen GALASSI, CNR-ISSMC, Faenza, Italy; DMEC-POLIMI, Milano, Italy
    S3-P036 - 3D Printing Lens of Ceramic Powder Mixed with Polymer in the Terahertz RegimeYi-An WEI, National Taiwan Normal University , Taipei, Taiwan
    Hsin-Yi PENG, National Taiwan Normal University , Taipei, Taiwan
    Chin-Pao CHENG, National Taiwan Normal University , Taipei, Taiwan
    Chan-Shan YANG, National Taiwan Normal University , Taipei, Taiwan

    person_pinYi-An WEI, National Taiwan Normal University , Taipei, Taiwan
    S3-P037 - Resin printer for ceramics fabrication: Challenges and ScopeSeema NEGI, IIT Bombay, Mumbai, India
    Parag BHARGAVA, IIT Bombay, Mumbai, India
    Prasanna S. GANDHI, IIT Bombay, Mumbai, India

    person_pinSeema NEGI, IIT Bombay, Mumbai, India
    S3-P038 - Additive Manufacturing of Advanced Ceramic Filter StructuresAnnapoorani KETHARAM, Loughborough University, Loughborough, United Kingdom
    Thanos GOULAS, Loughborough University, Loughborough, United Kingdom
    Aravind JANARTHANAN, Loughborough University, Loughborough, United Kingdom
    Sina SAREMI-YARAHMADI, Loughborough University, Loughborough, United Kingdom
    Bala VAIDHYANATHAN, Loughborough University, Loughborough, United Kingdom

    person_pinSina SAREMI-YARAHMADI, Loughborough University, Loughborough, United Kingdom
    S3-P040 - Additive manufacturing of capillary suspensions for sustainable energy harvestingGaurav VAJPAYEE,
    David MENNE, Karlsruhe Institute of Technology, Karlsruhe, Germany
    Lucas LEMOS DA SILVA,
    Manuel HINTERSTEIN,

    person_pinGaurav VAJPAYEE, Fraunhofer IWM, Freiburg, Germany; Karlsruhe Institute of Technology, Karlsruhe, Germany
    S3-P041 - Digitally manufactured Na-beta-Alumina Solid-State ElectrolytesAthanasios GOULAS, Loughborough University, Loughborough, United Kingdom
    Sina SAREMI-YARAHMADI, Loughborough University, Loughborough, United Kingdom
    Bala VAIDHYANATHAN, Loughborough University, Loughborough, United Kingdom

    person_pinAthanasios GOULAS, Loughborough University, Loughborough, United Kingdom
    S3-P042 - Development of zirconia feedstock materials for 3d printing of dental applications  Constantina-Dia ANDREOULI, MIRTEC S.A., Schimatari, Greece
    Eleni GARMPI, MIRTEC S.A., Schimatari, Greece
    Konstantinos DIMITRIADIS, MIRTEC S.A., Schimatari, Greece
    Diana BACIU, MIRTEC S.A., Schimatari, Greece
    Ioanna KITSOU, School of Mining and Metallurgical Engineering, National Technical University of Athens, Athens, Greece
    Panagiota ANGELOPOULOU, School of Mining and Metallurgical Engineering, National Technical University of Athens, Athens, Greece
    Eleni ROUSSI, School of Mining and Metallurgical Engineering, National Technical University of Athens, Athens, Greece
    Paraskevi GKOMOZA, School of Mining and Metallurgical Engineering, National Technical University of Athens, Athens, Greece
    Savvas KOLTSAKIDIS, Digital Manufacturing and Materials Characterization Laboratory, School of Science and Technology, International Hellenic University, Thermi, Greece
    Dimitrios TZETZIS, Digital Manufacturing and Materials Characterization Laboratory, School of Science and Technology, International Hellenic University, Thermi, Greece
    Antonis GALIATSATOS, Lino3D, Athens, Greece
    Athena TSETSEKOU, School of Mining and Metallurgical Engineering, National Technical University of Athens, Athens, Greece

    person_pinConstantina-Dia ANDREOULI, MIRTEC S.A., Schimatari, Greece
    S3-P043 - Effect of molecular weight and concentration of dispersants on the slip, 3D printing and sintered bodies of hydroxyapatite.Ashley DAVISON, School of Mechanical Engineering, Faculty of Engineering & Built Environment, Technological University Dublin, Bolton St, Dublin 1, Ireland, Dublin, Ireland
    Maura KELLEHER, School of Mechanical Engineering, Faculty of Engineering & Built Environment, Technological University Dublin, Bolton St, Dublin 1, Ireland, Dublin, Ireland
    Eamonn DEBARRA, The Bernal Institute, University of Limerick, Limerick, Ireland, Limerick, Ireland
    Aran RAFFERTY , Centre for Research on Adaptive Nanostructures and Nanodevices (CRANN) & Advanced Materials and Bioengineering Research (AMBER) Centre, Trinity College Dublin, Dublin 2, Ireland, Dublin, Ireland
    Stuart HAMPSHIRE, The Bernal Institute, University of Limerick, Limerick, Ireland, Limerick, Ireland

    person_pinAshley DAVISON, School of Mechanical Engineering, Faculty of Engineering & Built Environment, Technological University Dublin, Bolton St, Dublin 1, Ireland, Dublin, Ireland
    S3-P044 - Casting porous parts of calcium carbonate and geopolymer composite in a soluble mold produced by additive manufacturingMateus MOTA MORAIS,
    Marco Lorenzo D'AGOSTINI, Department of Industrial Engineering, University of Padova, Padova, Italy
    Carlos Alberto FORTULAN, São Carlos School of Engineering, University of São Paulo, São Carlos, Brazil
    Paolo COLOMBO,

    person_pinMateus MOTA MORAIS, Department of Industrial Engineering, University of Padova, Padova, Italy; São Carlos School of Engineering, University of São Paulo, São Carlos, Brazil
    S3-P045 - Micromechanical characterization of polymer-zirconia composite fabricated by Direct Ink Writing for dental applications  Miguel MORALES, CIEFMA, Department of Materials Science and Engineering, EEBE, Universitat Politècnica de Catalunya (UPC), Barcelona, Spain
    Ali RAZAVI,
    Maria NIUBÓ, Departament Mining, Industrial & ICT Engineering (Industrial Technologies), EPSE, Universitat Politècnica de Catalunya (UPC) , Manresa, Spain
    Luis LLANES,
    Emilio JIMÉNEZ-PIQUÉ,

    person_pinMiguel MORALES, CIEFMA, Department of Materials Science and Engineering, EEBE, Universitat Politècnica de Catalunya (UPC), Barcelona, Spain
    S3-P046 - Greener approach for fabricating transparent silica glass components through DLP using aqueous based photocurable suspensionsBohua MA, Graduate School of Engineering Science, Yokohama National University, Yokohama, Japan
    Junichi TATAMI, Faculty of Environment and Information Sciences, Yokohama National University, Yokohama, Japan
    Motoyuki IIJIMA, Faculty of Environment and Information Sciences, Yokohama National University, Yokohama, Japan

    person_pinBohua MA, Graduate School of Engineering Science, Yokohama National University, Yokohama, Japan
    S3-P047 - Photocuring behavior of interparticle photo-cross-linkable Pickering emulsions designed for shaping porous silica materials by DLPShogo TSUTAKI, Yokohama National University, Yokohama, Kanagawa, Japan
    Yoshihiko YAMANOI, Yokohama National University, Yokohama, Kanagawa, Japan
    Junichi TATAMI, Yokohama National University, Yokohama, Kanagawa, Japan
    Motoyuki IIJIMA, Yokohama National University, Yokohama, Kanagawa, Japan

    person_pinShogo TSUTAKI, Yokohama National University, Yokohama, Kanagawa, Japan
    S3-P049 - Direct Ink Writing (DIW) and field assisted sintering of BaTiO3 electroceramics  Subhadip BHANDARI, Department of Industrial Engineering, University of Padova, Via Marzolo 9, 35131 , Padova, Italy
    Mattia BIESUZ, Department of Industrial Engineering, University of Trento, Via Sommarive 9, 38122, Trento, Italy
    Giorgia FRANCHIN, Department of Industrial Engineering, University of Padova, Via Marzolo 9, 35131 , Padova, Italy

    person_pinSubhadip BHANDARI, Department of Industrial Engineering, University of Padova, Via Marzolo 9, 35131 , Padova, Italy
    S3-P050 - The use of robocasting technique to manufacture cordierite substratesFranklin CASARRUBIOS, Materials Institute, University of Mons, Mons, Belgium
    Maurice GONON, Materials Institute, University of Mons, Mons, Belgium
    Charlotte LANG, BCRC, Mons, Belgium
    Nicolas PREUX, BCRC, Mons, Belgium
    Enrique JUSTE, BCRC, Mons, Belgium
    Sandra ABDELOUHAB, BCRC, Mons, Belgium
    Gisèle LECOMTE-NANA, IRCER, Limoges, France
    Benoît NAIT-ALI, IRCER, Limoges, France

    person_pinEnrique JUSTE, BCRC, Mons, Belgium
    S3-P051 - Process parameters of additively manufactured carbon fiber reinforced green bodies for C/C-SiC ceramic matrix compositesJalena BEST, University of Bayreuth, Bayreuth, Germany
    Wolfgang FREUDENBERG, University of Bayreuth, Bayreuth, Germany
    Nico LANGHOF, University of Bayreuth, Bayreuth, Germany
    Stefan SCHAFFÖNER, University of Bayreuth, Bayreuth, Germany

    person_pinJalena BEST, University of Bayreuth, Bayreuth, Germany
    S3-P052 - Novel design of metal-ceramic joints using additive manufacturingRohit MALIK, Imperial College London, London, United Kingdom
    Reece OOSTERBEEK, University of Oxford, Oxford, United Kingdom
    Alfredo FANTETTI, Imperial College London, London, United Kingdom

    person_pinRohit MALIK, Imperial College London, London, United Kingdom
    S4-LP-290 - Superhard tool ceramics on the base of cBN-ZrC-Al, cBN-HfC-Al and cBN-TaC-Al systems for high-speed metalworkingVolodymyr TURKEVYCH, V. Bakul Institute for Superhard materials of Nat’l Academy of Sciences of Ukraine, Kyiv, Ukraine
    Tetyana PRIKHNA, V. Bakul Institute for Superhard materials of Nat’l Academy of Sciences of Ukraine, Kyiv, Ukraine
    Denis STRATIICHUK, V. Bakul Institute for Superhard materials of Nat’l Academy of Sciences of Ukraine, Kyiv, Ukraine
    Myroslav KARPETS, Igor Sikorsky Nat’l Technical University of Ukraine , Kyiv, Ukraine
    Nadiya BELYAVINA, Taras Shevchenko Nat’l University of Kyiv, Kyiv, Ukraine

    person_pinMyroslav KARPETS, Igor Sikorsky Nat’l Technical University of Ukraine , Kyiv, Ukraine
    S4-LP-288 - Design of anisotropic zirconia needles and its alignment to hierarchical structures using ice-templating techniqueSwapneel THAKKAR, CNRS, Lyon, France
    Julien SCHMITT, CNRS, Lyon, France
    Sylvain DEVILLE, CNRS, Lyon, France

    person_pinSwapneel THAKKAR, CNRS, Lyon, France
    S4-LP-289 - Improvement of properties and developing an algorithm of computer penetretion simulation of armor elements B- and C-based ceramicsPavlo BARVITSKYI, V. Bakul Institute for Superhard Materials NAS of Ukraine, Kyiv, Ukraine
    Tetiana PRIKHNA, V. Bakul Institute for Superhard Materials NAS of Ukraine, Kyiv, Ukraine
    Boris KARPINOS, G.S. Pisarenko Institute for Problems of Strength NAS of Ukraine, Kyiv, Ukraine
    Vitaliy KULISH, G.S. Pisarenko Institute for Problems of Strength NAS of Ukraine, Kyiv, Ukraine
    Anastasiia LOKATKINA, V. Bakul Institute for Superhard Materials NAS of Ukraine, Kyiv, Ukraine
    Semen PONOMAROV, Institute of Semiconductor Physics NAS of Ukraine, Kyiv, Ukraine
    Myroslav KARPETS, National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute”, Kyiv, Ukraine
    Richard HABER, Department of Materials Science and Engineering, Rutgers, The State University of New Jersey, Piscataway, New Jersey, United States

    person_pinMyroslav KARPETS, National Technical University of Ukraine "Igor Sikorsky Kyiv Polytechnic Institute”, Kyiv, Ukraine
    S4-P054 - Tribological behavior of few-layered graphene / zirconia compositesCarmen MUÑOZ-FERREIRO,
    Elisa GUISADO-ARENAS, Universidad de Sevilla, Departamento de Física de la Materia Condensada, ICMS (CSIC – Universidad de Sevilla) Apdo. 1065, 41080, Sevilla, Spain
    Rocío MORICHE,
    Ana MORALES-RODRÍGUEZ, Universidad de Sevilla, Departamento de Física de la Materia Condensada, ICMS (CSIC – Universidad de Sevilla) Apdo. 1065, 41080, Sevilla, Spain
    Rosalía POYATO, Instituto de Ciencia de Materiales de Sevilla, ICMS, CSIC-Universidad de Sevilla, Avda. Américo Vespucio 49. 41092, Sevilla, Spain
    Ángela GALLARDO-LÓPEZ, Universidad de Sevilla, Departamento de Física de la Materia Condensada, ICMS (CSIC – Universidad de Sevilla) Apdo. 1065, 41080, Sevilla, Spain
    Felipe GUTIÉRREZ-MORA, Universidad de Sevilla, Departamento de Física de la Materia Condensada, ICMS (CSIC – Universidad de Sevilla) Apdo. 1065, 41080, Sevilla, Spain

    person_pinCarmen MUÑOZ-FERREIRO, Universidad de Sevilla, Departamento de Física de la Materia Condensada, ICMS (CSIC – Universidad de Sevilla) Apdo. 1065, 41080, Sevilla, Spain; Instituto de Ciencia de Materiales de Sevilla, ICMS, CSIC-Universidad de Sevilla, Avda. Américo Vespucio 49. 41092, Sevilla, Spain; Univ. Lyon, CNRS, INSA Lyon, UCBL, MATEIS, UMR5510, 69621, Villeurbanne, France
    S4-P055 - Low-temperature densification of TiCN by spark plasma sintering with Si aidsCristina OJALVO, Department of Mechanical, Energy and Materials Engineering, University of Extremadura, 06006, Badajoz, Spain
    Ricardo MINEIRO, Department of Materials and Ceramic Engineering, CICECO – Aveiro Materials Institute, University of Aveiro, Campus Santiago, 3810-193, Aveiro, Portugal
    Cristina FERNANDES, Palbit S.A., P.O. Box 4, 3854-908 Branca, Albergaria-a-Velha, Portugal
    Ana M. R. SENOS, Department of Materials and Ceramic Engineering, CICECO – Aveiro Materials Institute, University of Aveiro, Campus Santiago, 3810-193, Aveiro, Portugal
    Ángel Luis ORTIZ, Department of Mechanical, Energy and Materials Engineering, University of Extremadura, 06006, Badajoz, Spain

    person_pinCristina OJALVO, Department of Mechanical, Energy and Materials Engineering, University of Extremadura, 06006, Badajoz, Spain
    S4-P056 - Thermoset injection molding with lost cores for improved freedom of design in shaping of C/C-SiC via LSIJonas STILLER, TU Chemnitz - Institute of Lightweight Structures, Chemnitz, Germany
    Daisy NESTLER, TU Chemnitz - Institute of Lightweight Structures, Chemnitz, Germany
    Lothar KROLL, TU Chemnitz - Institute of Lightweight Structures, Chemnitz, Germany

    person_pinDaisy NESTLER, TU Chemnitz - Institute of Lightweight Structures, Chemnitz, Germany
    S4-P057 - Mechanical Properties of Nacre-like Ceramics with Oxide Interphases at High TemperatureMaximilian BENNETT, Imperial College London, London, United Kingdom

    person_pinMaximilian BENNETT, Imperial College London, London, United Kingdom
    S4-P058 - Microstructural simulation and design of BN-TiCN-Ni composites produced by SPSRicardo MINEIRO, Department of Materials and Ceramic Engineering, CICECO – Aveiro Materials Institute, University of Aveiro, Campus Santiago, Aveiro, Portugal
    Cristina FERNANDES, Palbit S.A., Branca, Albergaria-a-Velha, Portugal
    Joaquim RODRIGUES, Department of Materials and Ceramic Engineering, CICECO – Aveiro Materials Institute, University of Aveiro, Campus Santiago, Aveiro, Portugal
    Daniel FIGUEIREDO, Palbit S.A., Branca, Albergaria-a-Velha, Portugal
    Begoña FERRARI, Instituto de Cerámica y Vidrio, CSIV, C/ Kelsen 5, 28049, Madrid, Spain
    Antonio SANCHEZ-HERENCIA, Instituto de Cerámica y Vidrio, CSIV, C/ Kelsen 5, 28049, Madrid, Spain
    Ana SENOS, Department of Materials and Ceramic Engineering, CICECO – Aveiro Materials Institute, University of Aveiro, Campus Santiago, Aveiro, Portugal

    person_pinCristina FERNANDES, Palbit S.A., Branca, Albergaria-a-Velha, Portugal
    S4-P059 - Kinetic study of CVD of SiC and modelling of optimal infiltration front in thermal gradient CVI processNatacha BESSOUET,
    Sylvain JACQUES,
    Gérard Louis VIGNOLES,
    Cédric DESCAMPS,

    person_pinNatacha BESSOUET, Laboratoire des Composites ThermoStructuraux, Pessac, France; Safran Ceramics, Mérignac, France
    S4-P060 - Multi-scale characterization of Transformation-induced plasticity in Ceria-doped zirconiaMarcelo DEMETRIO DE MAGALHÃES, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR5510, Villeurbanne, France
    Sylvain FOURNIER, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR5510, Villeurbanne, France
    Helen REVERON, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR5510, Villeurbanne, France
    Guilhem BAEZA, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR5510, Villeurbanne, France
    Thomas W. CORNELIUS, Aix Marseille Univ, Univ Toulon, IM2NP UMR CNRS 7334, Marseille, France
    Olivier THOMAS, Aix Marseille Univ, Univ Toulon, IM2NP UMR CNRS 7334, Marseille, France
    Jérôme CHEVALIER, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR5510, Villeurbanne, France

    person_pinSylvain FOURNIER, Univ Lyon, INSA Lyon, UCBL, CNRS, MATEIS, UMR5510, Villeurbanne, France
    S4-P061 - Synthesis of high-entropy carbides from multi-metal polymer precursorsHaotian YANG, Technische Universität Berlin, Berlin, Germany
    Sophie KLEMM, Technische Universität Berlin, Berlin, Germany
    Julian MÜLLER, Technische Universität Berlin, Berlin, Germany
    Maged BEKHEET, Technische Universität Berlin, Berlin, Germany
    Aleksander GURLO, Technische Universität Berlin, Berlin, Germany
    Dorian HANAOR, Technische Universität Berlin, Berlin, Germany

    person_pinHaotian YANG, Technische Universität Berlin, Berlin, Germany
    S4-P062 - Mechanical characterization of a ceramic matrix composite at room and high temperatures and modelling of damage mechanismsLéonore GINER,
    Pascal REYNAUD, Univ Lyon, INSA Lyon, UCB Lyon1, CNRS, MATEIS, UMR 5510, Villeurbanne, France
    Aurélien DOITRAND, Univ Lyon, INSA Lyon, UCB Lyon1, CNRS, MATEIS, UMR 5510, Villeurbanne, France
    Nathalie GODIN, Univ Lyon, INSA Lyon, UCB Lyon1, CNRS, MATEIS, UMR 5510, Villeurbanne, France
    Gilbert FANTOZZI, Univ Lyon, INSA Lyon, UCB Lyon1, CNRS, MATEIS, UMR 5510, Villeurbanne, France
    Sylvain COUSINET, MBDA, Le Plessis Robinson, France

    person_pinLéonore GINER, Univ Lyon, INSA Lyon, UCB Lyon1, CNRS, MATEIS, UMR 5510, Villeurbanne, France; MBDA, Le Plessis Robinson, France
    S4-P063 - Ionic Nano Reinforcement of Duplex  PVD and IBAD CoatingsBranko SKORIC, University of Novi Sad, Novi Sad, Serbia

    person_pinBranko SKORIC, University of Novi Sad, Novi Sad, Serbia
    S4-P064 - Thermal and mechanical properties of ultra-high temperature ceramics from TiB2/ZrB2-SiC/graphene systemsTomasz CYGAN, Warsaw University of Technology, Warsaw, Poland
    Marek KOSTECKI, Warsaw University of Technology, Warsaw, Poland
    Jaroslaw WOZNIAK, Warsaw University of Technology, Warsaw, Poland
    Andrzej OLSZYNA, Warsaw University of Technology, Warsaw, Poland

    person_pinTomasz CYGAN, Warsaw University of Technology, Warsaw, Poland
    S4-P066 - Designing geopolymer matrices for carbon fiber reinforced composites: the FENICE PROJECTValentina MEDRI, CNR-ISSMC (former CNR-ISTEC), Faenza, Italy
    Annalisa NATALI MURRI, CNR-ISSMC (former CNR-ISTEC), Faenza, Italy
    Elettra PAPA, CNR-ISSMC (former CNR-ISTEC), Faenza, Italy
    Elena LANDI, CNR-ISSMC (former CNR-ISTEC), Faenza, Italy

    person_pinValentina MEDRI, CNR-ISSMC (former CNR-ISTEC), Faenza, Italy
    S4-P067 - The Effect of Nanoceramics as Strengthening Agents on The Structural and Mechanical Properties of the 316L stainless steel?Haroune Rachid BEN ZINE, Eötvös Loránd Research Network, Center for Energy Research, Institute of Technical Physics and Materials Science, Thin Film Physics Department, Budapest, Hungary
    Zsolt Endre HORVATH, Eötvös Loránd Research Network, Center for Energy Research, Institute of Technical Physics and Materials Science, Thin Film Physics Department, Budapest, Hungary
    Zsolt CZIGÁNY, Eötvös Loránd Research Network, Center for Energy Research, Institute of Technical Physics and Materials Science, Thin Film Physics Department, Budapest, Hungary
    Katalin BALÁZSI, Eötvös Loránd Research Network, Center for Energy Research, Institute of Technical Physics and Materials Science, Thin Film Physics Department, Budapest, Hungary
    Csaba CSABA BALÁZSI , Eötvös Loránd Research Network, Center for Energy Research, Institute of Technical Physics and Materials Science, Thin Film Physics Department, Budapest, Hungary

    person_pinHaroune Rachid BEN ZINE, Eötvös Loránd Research Network, Center for Energy Research, Institute of Technical Physics and Materials Science, Thin Film Physics Department, Budapest, Hungary
    S4-P068 - comparative study of sliding wear without lubrication of boron carbide composites sintered by spark plasma with and without silicon auxiliaries.Víctor ZAMORA RODRIGUEZ, University of Extremadura, Badajoz, Spain
    Francisco Javier MARTÍNEZ VÁZQUEZ, University of Seville, Seville, Spain
    Fernando GUIBERTEAU CABANILLAS, University of Extremadura, Badajoz, Spain
    Ángel Luis ORTÍZ SECO, University of Extremadura, Badajoz, Spain

    person_pinVíctor ZAMORA RODRIGUEZ, University of Extremadura, Badajoz, Spain
    S4-P069 - Joining of CMCs for energy-intensive industriesValentina CASALEGNO, Politecnico di Torino-DISAT, Torino, Italy
    Carla MALINVERNI, Politecnico di Torino-DISAT, Torino, Italy
    Alessandro DE ZANET, Politecnico di Torino-DISAT, Torino, Italy
    Federico SMEACETTO, Politecnico di Torino-DISAT, Torino, Italy
    Milena SALVO, Politecnico di Torino-DISAT, Torino, Italy

    person_pinValentina CASALEGNO, Politecnico di Torino-DISAT, Torino, Italy
    S4-P070 - Surface texturing of non-oxide CMC via atmospheric-pressure plasma jet to improve joint strengthAlessandro DE ZANET, Department of Applied Science and Technology (DISAT) Politecnico di Torino, Torino, Italy
    Milena SALVO, Department of Applied Science and Technology (DISAT) Politecnico di Torino, Torino, Italy
    Valentina CASALEGNO, Department of Applied Science and Technology (DISAT) Politecnico di Torino, Torino, Italy
    Fabrizio VALENZA, National Research Council – Institute of Condensed Matter Chemistry and Technologies for Energy (CNR-ICMATE), Genoa, Italy
    Sofia GAMBARO, National Research Council – Institute of Condensed Matter Chemistry and Technologies for Energy (CNR-ICMATE), Genoa, Italy

    person_pinMilena SALVO, Department of Applied Science and Technology (DISAT) Politecnico di Torino, Torino, Italy
    S4-P071 - The consolidation of SiC ceramics using MAX phases as a new family of sintering activatorsJaroslaw WOZNIAK, Faculty of Materials Science and Engineering Warsaw University of Technology, Warszawa, Poland
    Mateusz PETRUS, Faculty of Materials Science and Engineering Warsaw University of Technology, Warszawa, Poland
    Tomasz CYGAN, Faculty of Materials Science and Engineering Warsaw University of Technology, Warszawa, Poland
    Andrzej OLSZYNA, Faculty of Materials Science and Engineering Warsaw University of Technology, Warszawa, Poland

    person_pinJaroslaw WOZNIAK, Faculty of Materials Science and Engineering Warsaw University of Technology, Warszawa, Poland
    S4-P072 - Aging mechanisms of ceramic matrix composites potentially used as cell liners in a geological disposal of radioactive wasteGuillaume GERMAN,
    Emilie PERRET, High Performance Multifunctional Materials Domain IRT Saint Exupéry, Talence, France
    Francis REBILLAT,
    Aurélien DEBELLE, Agence nationale pour la gestion des déchets radioactifs (Andra), Châtenay-Malabry, France
    Bourbon XAVIER, Agence nationale pour la gestion des déchets radioactifs (Andra), Châtenay-Malabry, France
    Jérôme ROGER,

    person_pinGuillaume GERMAN, High Performance Multifunctional Materials Domain IRT Saint Exupéry, Talence, France; Laboratoire des Composites Thermo Structuraux (LCTS), Pessac, France; Université de Bordeaux, Pessac, France
    S4-P073 - Efficiency of different tin oxide antimony oxide mixtures as dopants for laser-induced direct metallization of alumina ceramicsSimon KELLER, University of Stuttgart - IFKB, Stuttgart, Germany
    Florian RIBBECK, University of Stuttgart - IFKB, Stuttgart, Germany
    Frank KERN, University of Stuttgart - IFKB, Stuttgart, Germany

    person_pinSimon KELLER, University of Stuttgart - IFKB, Stuttgart, Germany
    S4-P074 - Ytterbia - praseodymia co-stabilized TZP with high toughness and transformation limited strength  Bettina OSSWALD, University of Stuttgart, Institute for Manufacturing Technologies of Ceramic Components and Composites (IMTCCC), Stuttgart, Germany
    Frank KERN, University of Stuttgart, Institute for Manufacturing Technologies of Ceramic Components and Composites (IMTCCC), Stuttgart, Germany

    person_pinBettina OSSWALD, University of Stuttgart, Institute for Manufacturing Technologies of Ceramic Components and Composites (IMTCCC), Stuttgart, Germany
    S4-P075 - Investigation of the Anisotropic Properties of Spark Plasma Sintered Graphene Added Boron Carbide Ceramic CompositesSalih Cagri OZER, Department of Materials Science and Engineering, Faculty of Engineering, Eskisehir Technical University, Eskisehir, Turkey
    Kartal ARSLAN, Department of Materials Science and Engineering, Faculty of Engineering, Eskisehir Technical University, Eskisehir, Turkey
    Serhat AKSOY, Department of Materials Science and Engineering, Faculty of Engineering, Eskisehir Technical University, Eskisehir, Turkey
    Osman ERYIGIT, Department of Materials Science and Engineering, Faculty of Engineering, Eskisehir Technical University, Eskisehir, Turkey
    Kayra KUBAS, Department of Materials Science and Engineering, Faculty of Engineering, Eskisehir Technical University, Eskisehir, Turkey
    Umut SAVACI, Department of Materials Science and Engineering, Faculty of Engineering, Eskisehir Technical University, Eskisehir, Turkey
    Servet TURAN, Department of Materials Science and Engineering, Faculty of Engineering, Eskisehir Technical University, Eskisehir, Turkey

    person_pinSalih Cagri OZER, Department of Materials Science and Engineering, Faculty of Engineering, Eskisehir Technical University, Eskisehir, Turkey
    S4-P076 - Fabrication of 2D fabric based Cf/SiOC composites by PIP process for exhaust nozzle applicationsDoo Hyun CHOI, Agency for Defense and Development, Daejeon, Korea (Republic of)
    Ji Eun LEE, Agency for Defense and Development, Daejeon, Korea (Republic of)
    Man Young LEE, Agency for Defense and Development, Daejeon, Korea (Republic of)
    Hyung Ik LEE, Agency for Defense and Development, Daejeon, Korea (Republic of)

    person_pinDoo Hyun CHOI, Agency for Defense and Development, Daejeon, Korea (Republic of)
    S4-P077 - Effect of platinum catalyst on properties of polysiloxane resin and SiCf/SiOC compositesJi Eun LEE, Agency for Defense Development, Daejeon, Korea (Republic of)
    Doo Hyun CHOI, Agency for Defense Development, Daejeon, Korea (Republic of)
    Man Young LEE, Agency for Defense Development, Daejeon, Korea (Republic of)
    Hyung Ik LEE, Agency for Defense Development, Daejeon, Korea (Republic of)

    person_pinJi Eun LEE, Agency for Defense Development, Daejeon, Korea (Republic of)
    S4-P078 - Scratch, fretting, and sliding wear of a ZrB2–hardened Zr3Al2 intermetallic–ceramic compositeJesús LÓPEZ-ARENAL, Departamento de Física de la Materia Condensada, Universidad de Sevilla, Seville, Spain
    Bibi Malmal MOSHTAGHIOUN, Departamento de Física de la Materia Condensada, Universidad de Sevilla, Seville, Spain
    Diego GÓMEZ-GARCÍA, Departamento de Física de la Materia Condensada, Universidad de Sevilla, Seville, Spain
    Ángel Luis ORTIZ, Departamento de Ingeniería Mecánica, Energética y de los Materiales, Universidad de Extremadura, Badajoz, Spain

    person_pinJesús LÓPEZ-ARENAL, Departamento de Física de la Materia Condensada, Universidad de Sevilla, Seville, Spain
    S4-P079 - Improvement of thermo-mechanical properties of oxide ceramic fibres in the material system Al2O3-SiO2Hakan OKAN, Fraunhofer Institut für Silicatforschung, Zentrum für Hochtemperaturleichtbau, Würzburg, Germany
    Ralf HERBORN, Fraunhofer Institut für Silicatforschung, Zentrum für Hochtemperaturleichtbau, Würzburg, Germany
    Arne RÜDINGER, Fraunhofer Institut für Silicatforschung, Zentrum für Hochtemperaturleichtbau, Würzburg, Germany

    person_pinHakan OKAN, Fraunhofer Institut für Silicatforschung, Zentrum für Hochtemperaturleichtbau, Würzburg, Germany
    S4-P080 - Improvement of the densification process during natural sintering of environmental barrier coatings for SiC/SiC composites Thibault MOURET, Université de Bordeaux / LCTS, PESSAC, France
    Laurence MAILLÉ, Université de Bordeaux / LCTS, PESSAC, France
    Francis REBILLAT, Université de Bordeaux / LCTS, PESSAC, France

    person_pinLaurence MAILLÉ, Université de Bordeaux / LCTS, PESSAC, France
    S4-P081 - Analysis of infiltration phenomena and molecular dynamics of wetting at the interface between molten metal and ceramics0Taketo KOIZUMI, Tokyo University of Science, Tokyo, Japan
    Daichi MATSUBARA, Tokyo University of Science, Tokyo, Japan
    Yutaro ARAI, Tokyo University of Science, Tokyo, Japan
    Takuya AOKI, Japan Aerospace Exploration Agency, Tokyo, Japan
    Ryo INOUE, Tokyo University of Science, Tokyo, Japan

    person_pinTaketo KOIZUMI, Tokyo University of Science, Tokyo, Japan
    S4-P082 - Deep learning-based 3D reconstruction of SiCf/SiC-W-ZrB2 composites during chemical vapor infiltration and slurry infiltrationHaozhen LI, Northwestern Polytechnical University, Xi'an, China
    Chong WEI, Northwestern Polytechnical University, Xi'an, China
    Xiaoqiang LI, Northwestern Polytechnical University, Xi'an, China

    person_pinHaozhen LI, Northwestern Polytechnical University, Xi'an, China
    S4-P083 - Dislocations and nanomechanics in α-Al2O3 under nanoindentation using atomic simulations Qinqin XU, National Centre for Nuclear Research, Otwock-Świerk, Poland
    Stefanos PAPANIKOLAOU, National Centre for Nuclear Research, Otwock-Świerk, Poland

    person_pinQinqin XU, National Centre for Nuclear Research, Otwock-Świerk, Poland
    S4-P084 - Evolution of the decomposition mechanisms as a function of heating rate of a biosourced polymers reinforced with carbon fibers.Victor ASENSIO, Laboratory of Thermostructural Composites (LCTS) - University of Bordeaux, (UMR 5801 : CNRS, CEA, SAFRAN, UB), Pessac, France
    Francis REBILLAT, Laboratory of Thermostructural Composites (LCTS) - University of Bordeaux, (UMR 5801 : CNRS, CEA, SAFRAN, UB), Pessac, France
    David DAMIANI,
    Antonio COSCULLUELA,

    person_pinVictor ASENSIO, Laboratory of Thermostructural Composites (LCTS) - University of Bordeaux, (UMR 5801 : CNRS, CEA, SAFRAN, UB), Pessac, France
    S4-P085 - High-temperature stable oxide ceramic fibers with novel compositionsStephanie PFEIFER, DITF Denkendorf, Denkendorf, Germany
    Leonie REINDERS, DITF Denkendorf, Denkendorf, Germany
    Bernd CLAUß, DITF Denkendorf, Denkendorf, Germany
    Michael R. BUCHMEISER,

    person_pinStephanie PFEIFER, DITF Denkendorf, Denkendorf, Germany
    S4-P086 - Obtaining and studying of carbide- SiAlON composite in the SiC-SiAlON-Al203 system for armor  and missile equipmentZviad KOVZIRIDZE, Georgian Technical University, Georgian Ceramic Assotiation, Tbilsi, Georgia
    Natela NIZHARADZE, Georgian Technical University, Georgian Ceramic Assotiation, Tbilsi, Georgia
    Gulnazi TABATAZE, Georgian Technical University, Georgian Ceramic Assotiation, Tbilsi, Georgia
    Nino DARAKHVELIDZE, Georgian Technical University, Georgian Ceramic Assotiation, Tbilsi, Georgia
    Maia BALAKHASHVILI, Georgian Technical University, Georgian Ceramic Assotiation, Tbilsi, Georgia
    Salome GVAZAVA, Georgian Technical University, Georgian Ceramic Assotiation, Tbilsi, Georgia
    Misha CHIKHRADZE, Georgian Technical University, Georgian Ceramic Assotiation, Tbilsi, Georgia

    person_pinZviad KOVZIRIDZE, Georgian Technical University, Georgian Ceramic Assotiation, Tbilsi, Georgia
    S4-P087 - Textured, thick Ti3SiC2 coatings formed by high temperature reaction on graphiteDidier CHAUSSENDE, Univ. Grenoble Alpes, CNRS, Grenoble INP, SIMaP, Grenoble, France
    Kylian BREUCQ,
    David DUMEZ,
    Virginie ROCHE, Univ. Grenoble Alpes, CNRS, Grenoble INP, LEPMI, Grenoble, France

    person_pinDidier CHAUSSENDE, Univ. Grenoble Alpes, CNRS, Grenoble INP, SIMaP, Grenoble, France
    S4-P088 - Computational Thermodynamics of Mo-Ti-Si-C system to develop new short Ceramic fiber reinforced-Intermetallic Matrix CompositesElena DAUFRESNE,
    Mirna BECHELANY, ThermoStructural Composites Laboratory, UMR 5801, Safran, CEA, CNRS, Université de Bordeaux, 3 Allée de la Boétie, 33600 Pessac, FRANCE , Bordeaux, France
    Yann LE PETITCORPS, ThermoStructural Composites Laboratory, UMR 5801, Safran, CEA, CNRS, Université de Bordeaux, 3 Allée de la Boétie, 33600 Pessac, FRANCE , Bordeaux, France
    Olivier DEZELLUS, Multi-Materials and Interfaces Laboratory, UMR 5615, CNRS, Université Claude Bernard Lyon 1, 6 rue Victor Grignard, FRANCE, Lyon, France

    person_pinElena DAUFRESNE, ThermoStructural Composites Laboratory, UMR 5801, Safran, CEA, CNRS, Université de Bordeaux, 3 Allée de la Boétie, 33600 Pessac, FRANCE , Bordeaux, France; Multi-Materials and Interfaces Laboratory, UMR 5615, CNRS, Université Claude Bernard Lyon 1, 6 rue Victor Grignard, FRANCE, Lyon, France
    S4-P090 - Preparation of Al2O3-TiB2 composite coating by Air Plasma spraying of SHS powders on steel substrateSeyed Hossein MIRHOSSEINI,
    Masoud MOSALLAEE, Department of Mining and Metallurgical Engineering, Yazd University, Yazd, Iran
    Mansour RAZAVI, Department of Ceramics, Materials and Energy Research Centre, Karaj, Iran
    Mohammad FOTOUHI, Department of Materials, Mechanics, Management and Design, Delft University of Technology, Delft, Netherlands

    person_pinSeyed Hossein MIRHOSSEINI, Modern Ceramic Materials Institute, Academic Center for Education, Culture and Research-Yazd Branch, Yazd, Iran; Department of Mining and Metallurgical Engineering, Yazd University, Yazd, Iran
    S5-LP-291 - Discrete modeling of MgO-C refractory composites under loading-unloading-reloading compaction cyclesJúlia Cristina BONALDO, Vesuvius group, Mons, Belgium
    Christophe L. MARTIN, Univ. Grenoble Alpes, CNRS, Grenoble INP, SIMaP, Grenoble, France
    Martiniano PICICCO, Vesuvius group, Mons, Belgium
    Keith BAILE, Vesuvius group, Mons, Belgium
    Severine ROMERO BAIVIER, Vesuvius group, Mons, Belgium

    person_pinJúlia Cristina BONALDO, Vesuvius group, Mons, Belgium
    S5-P092 - A Multicomponent Diffusion Model and Software for Oxide MeltsIhnbeom LEE, Seoul National University, Seoul, Korea (Republic of)

    person_pinIhnbeom LEE, Seoul National University, Seoul, Korea (Republic of)
    S5-P094 - Performance prediction and assessment of reusability and recycling of refractory materials using the NDT sensoring approach and MLAmit Kumar GOPE,
    Alexandre BOULLE, University of Limoges, IRCER, UMR CNRS 7315, , 12 rue Atlantis, 87068 Limoges , France
    Johan RICHAUD, Vesuvius group plc, Department of Advanced Refractories, 17, Rue de Douvrain, B-7011 Ghlin, Belgium
    Felix BIRKELBACH, TU Wien, Institute for Energy Systems and Thermodynamics, Getreidemarkt 9/E302, 1060 Vienna, Austria
    Lionel REBOUILLAT, Pyrotek Inc, Mineral Processing, Iron & Steel Department, 2400 Bd Lemire, Drummondville, QC J2B 6X9,, Canada
    Séverine ROMERO-BAIVIER, Vesuvius group plc, Department of Advanced Refractories, 17, Rue de Douvrain, B-7011 Ghlin, Belgium
    Marc HUGER, University of Limoges, IRCER, UMR CNRS 7315, , 12 rue Atlantis, 87068 Limoges , France

    person_pinAmit Kumar GOPE, University of Limoges, IRCER, UMR CNRS 7315, , 12 rue Atlantis, 87068 Limoges , France; Vesuvius group plc, Department of Advanced Refractories, 17, Rue de Douvrain, B-7011 Ghlin, Belgium
    S5-P096 - Plasma-sprayed graphene/carbon nanotube reinforced lanthanum-cerate hybrid composite coatingPushpender SINGH , IIT PATNA, PATNA, India
    Niranjan PANDIT, IIT PATNA, PATNA, India
    Anup Kumar KESHRI, IIT PATNA, PATNA, India

    person_pinPushpender SINGH , IIT PATNA, PATNA, India
    S5-P097 - Laser surface modification of WC-Co cutting tools – an investigation of different approachesBruno GUIMARÃES, CMEMS - University of Minho, Guimarães, Portugal
    Cristina FERNANDES, Palbit S.A., Palhal, Branca, Portugal
    Daniel FIGUEIREDO, Palbit S.A., Palhal, Branca, Portugal
    Filipe SILVA, CMEMS - University of Minho, Guimarães, Portugal
    Georgina MIRANDA, CICECO, Aveiro Institute of Materials, Aveiro, Portugal

    person_pinBruno GUIMARÃES, CMEMS - University of Minho, Guimarães, Portugal
    S5-P098 - Effect of carbides and silicides additives on sintering and properties of UHTC composites based on hafnium and zirconium boridesKamil KORNAUS, AGH University of Science and Technology, Krakow, Małopolska, Poland
    Zbigniew PEDZICH, AGH University of Science and Technology, Krakow, Małopolska, Poland
    Agnieszka GUBERNAT, AGH University of Science and Technology, Krakow, Małopolska, Poland
    Piotr KLIMCZYK, Sieć Badawcza Łukasiewicz - Krakow Institute of Technology, Krakow, Małopolska, Poland
    Marcin PODSIAD?O, Sieć Badawcza Łukasiewicz - Krakow Institute of Technology, Krakow, Małopolska, Poland
    Dariusz ZIENTARA, AGH University of Science and Technology, Krakow, Małopolska, Poland
    Lukasz ZYCH, AGH University of Science and Technology, Krakow, Małopolska, Poland

    person_pinKamil KORNAUS, AGH University of Science and Technology, Krakow, Małopolska, Poland
    S5-P099 - On the Statistics of the Mechanical Failure in Flame-Sprayed Self Supporting ComponentsMarc NEUMANN, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Magda HOLLENBACH, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Florian KERBER, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Tony WETZIG, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    Christos G. ANEZIRIS, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany

    person_pinMarc NEUMANN, TU Bergakademie Freiberg, Institute of Ceramics, Refractories and Composite Materials, Freiberg, Germany
    S5-P100 - Investigation of relationships between microstructure and thermomechanical properties of refractory material using the DEMHarikeshava RANGANATHAN,
    Ratana SOTH, Imerys Technology Center, Lyon, France
    Christoph WÖHRMEYER, Imerys Technology Center, Lyon, France
    Damien ANDRÉ, IRCER / University of Limoges, Limoges, France
    Marc HUGER, IRCER / University of Limoges, Limoges, France

    person_pinHarikeshava RANGANATHAN, Imerys Technology Center, Lyon, France; IRCER / University of Limoges, Limoges, France
    S5-P101 - Fabrication of Ultra High Temperature Ceramics by spark plasma sintering: non-reactive and reactive routesTimothé MENARD,
    Francis REBILLAT,
    Nicolas TÉNÈZE, CEA/DAM, Le Ripault , Monts, France
    Olivier LEDAIN, CEA/DAM, CESTA, Le Barp, France
    Laurence MAILLÉ,

    person_pinTimothé MENARD, Laboratoire des Céramiques Thermostructuraux, Talence, France; Université de Bordeaux, Talence, France
    S5-P102 - Effects of Grain Size and Shape of alumina aggregates on the Sinterability and Thermal Shock Resistance of Refractory MaterialsKwasi Addo BOATENG, Imerys S.A., Paris, France
    Jean-Michel AUVRAY, Imerys S.A., Paris, France
    Christoph WÖHRMEYER, Imerys S.A., Paris, France
    Marc HUGER, Université de Limoges, IRCER, UMR CNRS 7315, 12 rue Atlantis, 87068, Limoges, France
    Elsa THUNE, Université de Limoges, IRCER, UMR CNRS 7315, 12 rue Atlantis, 87068, Limoges, France
    Nicolas TESSIER-DOYEN, Université de Limoges, IRCER, UMR CNRS 7315, 12 rue Atlantis, 87068, Limoges, France

    person_pinKwasi Addo BOATENG, Imerys S.A., Paris, France
    S5-P103 - Combining Digital Light Processing with Pressure-less SPS for the additive manufacturing of Ultra-Hight Temperature CeramicsÁlvaro SÁNDEZ, Universidad de Extremadura, Badajoz, Spain
    Florencia M. NOGALES, Universidad de Extremadura, Badajoz, Spain
    Antonia PAJARES, Universidad de Extremadura, Badajoz, Spain
    Angel L. ORTIZ, Universidad de Extremadura, Badajoz, Spain
    Pedro MIRANDA, Universidad de Extremadura, Badajoz, Spain

    person_pinFlorencia M. NOGALES, Universidad de Extremadura, Badajoz, Spain
    S5-P104 - Life Cycle Assessment (LCA) and eco-design: towards optimized refractory materials for a green steelmaking processSarah BADIOLI,
    Thibault CHAMPION, Saint-Gobain Research Provence, Cavaillon, France
    Léna ROUMIGUIER, Saint-Gobain Research Provence, Cavaillon, France
    Marielle DARGAUD, Saint-Gobain Research Provence, Cavaillon, France
    Angélique LÉONARD, University of Liège, Liège, Belgium

    person_pinSarah BADIOLI, University of Liège, Liège, Belgium; Saint-Gobain Research Provence, Cavaillon, France
    S5-P105 - Carbon fiber reinforced Ti-Zr-Nb-V-B-C ceramic composites: Compositionally complex ceramic composites without containing “Si”Yutaro ARAI, Tokyo University of Science, Tokyo, Japan
    Ryo TSURUOKA, Tokyo University of Science, Tokyo, Japan
    Yuki KOMIYA, Tokyo University of Science, Tokyo, Japan
    Ryo INOUE, Tokyo University of Science, Tokyo, Japan
    Yasuo KOGO, Tokyo University of Science, Tokyo, Japan

    person_pinYutaro ARAI, Tokyo University of Science, Tokyo, Japan
    S5-P107 - Degradation of Hf - containing C/UHTCMCs by arc wind tunnel testsNoriatsu KOIDE, Tokyo University of Science, Tokyo, Japan
    Yutaro ARAI, Tokyo University of Science, Tokyo, Japan
    Ryo INOUE, Tokyo University of Science, Tokyo, Japan

    person_pinNoriatsu KOIDE, Tokyo University of Science, Tokyo, Japan
    S5-P108 - Use of metallurgical residues as potential raw materials for high performance refractory castables.  Mathilda DERENSY, GHI - Institute of Mineral engineering - RWTH, Aachen, Germany
    Thorsten TONNESEN, GHI - Institute of Mineral engineering - RWTH, Aachen, Germany
    Jong-Won SHIN, Calderys , Neuwied, Germany

    person_pinMathilda DERENSY, GHI - Institute of Mineral engineering - RWTH, Aachen, Germany
    S5-P109 - Obtaining a high-refractory clinker based on local raw materials for cement and metallurgical furnaces.Maia BALAKHASHVILI, Gerogian Technical University, Georgian Ceramic Assotiation, Tbilisi, Georgia
    Kovziridze ZVIAD, Gerogian Technical University, Georgian Ceramic Assotiation, Tbilisi, Georgia
    Nizharadze NATELA, Gerogian Technical University, Georgian Ceramic Assotiation, Tbilisi, Georgia
    Nino DARAKHVELIDZE, Gerogian Technical University, Georgian Ceramic Assotiation, Tbilisi, Georgia
    Vera QINQLADZE, Gerogian Technical University, Georgian Ceramic Assotiation, Tbilisi, Georgia

    person_pinMaia BALAKHASHVILI, Gerogian Technical University, Georgian Ceramic Assotiation, Tbilisi, Georgia
    S5-P282 - A Novel (MoWCoNi)Nx High Entropy Nitride Thin Film as Diffusion Barrier for Copper/Silicon InterconnectionCheng-Hsien YEH, Department of Electrical Engineering, National Cheng Kung University, Tainan, Taiwan
    Chia-Ching LIN, Department of Electrical Engineering, National Cheng Kung University, Tainan, Taiwan
    Hsuan-Ta WU, Department of Electrical Engineering, Minghsin University of Science and Technology, Hsinchu, Taiwan
    Chuan-Feng SHIH,

    person_pinCheng-Hsien YEH, Department of Electrical Engineering, National Cheng Kung University, Tainan, Taiwan
    S6-P110 - Characterization of red clays as alternative raw materials for the porcelain stoneware tiles industryRiccardo FANTINI, Department of Chemical and Geological Sciences - University of Modena and Reggio Emilia, Modena, Italy
    Sonia CONTE, CNR - ISSMC, Faenza (RA), Italy
    Chiara ZANELLI, CNR - ISSMC, Faenza (RA), Italy
    Michele DONDI, CNR - ISSMC, Faenza (RA), Italy
    Alessandro F. GUALTIERI, Department of Chemical and Geological Sciences - University of Modena and Reggio Emilia, Modena, Italy
    Rossella ARLETTI, Department of Chemical and Geological Sciences - University of Modena and Reggio Emilia, Modena, Italy

    person_pinRiccardo FANTINI, Department of Chemical and Geological Sciences - University of Modena and Reggio Emilia, Modena, Italy
    S6-P111 - THE USE OF WASTE PLASTER MOLD IN THE CHEMICAL TREATMENT OF CERAMIC INDUSTRY PROCESS WASTEWATER AND THIER OPTIMIZATION BY RSMCan Alp TERZIOGLU, MATEL HAMMADDE SAN. VE TIC. A. MANISA SEREL SUBESI, MANISA, Turkey
    Cemre Su DOGUELLI ERDOGAN, MATEL HAMMADDE SAN. VE TIC. A. MANISA SEREL SUBESI, MANISA, Turkey
    Tulin Deniz CIFCI, EGE UNIVERSITY, IZMIR, Turkey
    Baran TARHAN, UŞAK UNIVERSITY, USAK, Turkey

    person_pinCan Alp TERZIOGLU, MATEL HAMMADDE SAN. VE TIC. A. MANISA SEREL SUBESI, MANISA, Turkey
    S6-P112 - Recyclability of refractory materials: thermomechanical properties characterization in steel continuous castingAndrea SALERNO,
    Nicolas TESSIER-DOYEN, University of Limoges, Limoges, France
    Elsa THUNE, University of Limoges, Limoges, France
    Johan RICHAUD, Vesuvius, Ghlin, Belgium
    Lionel REBOUILLAT, Pyrotek, Drummondville, Canada
    Severine ROMERO BAIVIER, Vesuvius, Ghlin, Belgium
    Marc HUGER, University of Limoges, Limoges, France

    person_pinAndrea SALERNO, University of Limoges, Limoges, France; Vesuvius, Ghlin, Belgium
    S6-P113 - Geopolymeric synthesis pathway for porous SiO2-AlO2-PO2 ceramic-like material via replica shapingMarko RUKAVINA, Faculty of Chemical Engineering and Technology, University of Zagreb, Zagreb, Croatia
    Arijeta BAFTI, Faculty of Chemical Engineering and Technology, University of Zagreb, Zagreb, Croatia
    Ivana PANŽIC, Faculty of Chemical Engineering and Technology, University of Zagreb, Zagreb, Croatia
    Floren RADOVANOVIC-PERIC, Faculty of Chemical Engineering and Technology, University of Zagreb, Zagreb, Croatia
    Vilko MANDIC, Faculty of Chemical Engineering and Technology, University of Zagreb, Zagreb, Croatia

    person_pinMarko RUKAVINA, Faculty of Chemical Engineering and Technology, University of Zagreb, Zagreb, Croatia
    S6-P114 - Utilization of Fired Wall Tile Scraps Containing Anorthite as a Raw Material in Porcelain Stoneware Tile BodyIstem SENCAN, Qua Granite R&D Laboratory Researcher , Aydın, Turkey

    person_pinIstem SENCAN, Qua Granite R&D Laboratory Researcher , Aydın, Turkey
    S6-P115 - Obtaining a highly porous mass intended for molding by means of 3D printing, with the addition of coffee groundsKatarzyna PASIUT, AGH UST, Krakow, Poland
    Janusz PARTYKA, AGH UST, Krakow, Poland
    Dawid KOZIEN, AGH UST, Krakow, Poland

    person_pinKatarzyna PASIUT, AGH UST, Krakow, Poland
    S6-P117 - HIGHLY POROUS CERAMIC MEMBRANES BASED ON ZEOLITES FOR WASTEWATER FILTRATIONIvan STIJEPOVIC, University of Novi Sad, Faculty of Technology Novi Sad, Novi Sad, Serbia
    Marija MILANOVIC, University of Novi Sad, Faculty of Technology Novi Sad, Novi Sad, Serbia

    person_pinIvan STIJEPOVIC, University of Novi Sad, Faculty of Technology Novi Sad, Novi Sad, Serbia
    S6-P118 - Novel method of synthesis of MgAl2O4 spinel using concentrated solar energy and an industrial waste as source of Al2O3Daniel FERNÁNDEZ-GONZÁLEZ, Nanomaterials and Nanotechnology Research Center (CINN-CSIC), El Entrego, Spain
    Juan PIÑUELA-NOVAL, Nanomaterials and Nanotechnology Research Center (CINN-CSIC), El Entrego, Spain
    Cristian GÓMEZ-RODRÍGUEZ, Departamento de Mecánica, Facultad de Ingeniería, Universidad Veracruzana, Coatzacoalcos, Mexico
    Luis Felipe VERDEJA, Departament of Materials Science and Metallurgical Engineering, School of Mines, Energy and Materials, Universidad de Oviedo, Oviedo, Spain
    Adolfo FERNÁNDEZ, Nanomaterials and Nanotechnology Research Center (CINN-CSIC), El Entrego, Spain

    person_pinJuan PIÑUELA-NOVAL, Nanomaterials and Nanotechnology Research Center (CINN-CSIC), El Entrego, Spain
    S6-P119 - Investigation of the influence of biogas utilization onto the sintering behavior of phyllosilicate ceramicsFleur GUILLEMIN, Institut de Recherche sur les Céramiques, IRCER, UMR CNRS 7315, Université de Limoges, Limoges, France
    Gisèle LECOMTE-NANA, Institut de Recherche sur les Céramiques, IRCER, UMR CNRS 7315, Université de Limoges, Limoges, France
    Youssef EL HAFIANE, Institut de Recherche sur les Céramiques, IRCER, UMR CNRS 7315, Université de Limoges, Limoges, France
    Claire PEYRATOUT, Institut de Recherche sur les Céramiques, IRCER, UMR CNRS 7315, Université de Limoges, Limoges, France
    Agnès SMITH, Institut de Recherche sur les Céramiques, IRCER, UMR CNRS 7315, Université de Limoges, Limoges, France

    person_pinFleur GUILLEMIN, Institut de Recherche sur les Céramiques, IRCER, UMR CNRS 7315, Université de Limoges, Limoges, France
    S6-P120 - Influence of sintering aids on the piezoelectric properties of KNN based ceramicsAna BORTA-BOYON, THALES, Palaiseau, France
    Lucie BADOURIC, THALES, Palaiseau, France
    Rebecca DAMAMME, THALES, Palaiseau, France

    person_pinAna BORTA-BOYON, THALES, Palaiseau, France
    S6-P121 - SUSTAINABLE INORGANIC PIGMENTS FOR HIGH TEMPERATURE APPLICATIONS BASED ON Fe3+ DOPED YAlO3 WITH HIGH NEAR-INFRARED REFLECTANCESilvia BLASCO ZARZOSO, Universidad Jaume I , Castellón, Spain
    Héctor BELTRÁN MIR, Universidad Jaume I , Castellón, Spain
    Eloísa CORDONCILLO CORDONCILLO, Universidad Jaume I , Castellón, Spain

    person_pinSilvia BLASCO ZARZOSO, Universidad Jaume I , Castellón, Spain
    S6-P122 - Novel Carbon fiber/PEEK-hybrid yarn based non-oxide ceramic matrix compositeMelissa MOOS, University of Bayreuth, Bayreuth, Germany
    Gregor OHNEMÜLLER, University of Bayreuth, Bayreuth, Germany
    Nico LANGHOF, University of Bayreuth, Bayreuth, Germany
    Stefan SCHAFFÖNER, University of Bayreuth, Bayreuth, Germany

    person_pinMelissa MOOS, University of Bayreuth, Bayreuth, Germany
    S6-P123 - Formula for macro-mechanical characteristics of materials depending on the porous phase.Zviad KOVZIRIDZE, Georgian Technical University, Georgian Ceramic Assotiation, Tbilsi, Georgia

    person_pinZviad KOVZIRIDZE, Georgian Technical University, Georgian Ceramic Assotiation, Tbilsi, Georgia
    S7-LP-293 - Dielectric properties of SiO2-Al2O3-Na2O-CaO-K2O glass in the range from 1 KHz to 60 GHzTing-Lu TUAN, Institute of Mineral Resources Engineering, College of Engineering, National Taipei University of Technology, Taipei, Taiwan
    Sea-Fue WANG, Department of Materials and Mineral Resources Engineering, College of Engineering, National Taipei University of Technology, Taipei, Taiwan
    Bing-Sheng YU, Institute of Mineral Resources Engineering, College of Engineering, National Taipei University of Technology, Taipei, Taiwan

    person_pinTing-Lu TUAN, Institute of Mineral Resources Engineering, College of Engineering, National Taipei University of Technology, Taipei, Taiwan
    S7-LP-292 - INCREASING SURFACE AND COLOR STABILIZATION IN MATTE BLACK GLAZESAyse TUNALI, Eczacıbaşı Building Products Inc., Eskişehir, Turkey
    Gulsah AKDEMIR YURDABAK, Eczacıbaşı Building Products Inc., Eskişehir, Turkey

    person_pinAyse TUNALI, Eczacıbaşı Building Products Inc., Eskişehir, Turkey
    S7-LP-294 - Effect of NaBO2 on the Structural Organization of Phase-Separated Bioactive Glasses and the Clustering of Si, P, and F AtomsHugo FERNANDES, CICECO - Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    Anuraag GADDAM, Instituto de Física de São Carlos, Universidade de São Paulo, São Carlos, Brazil
    Gregory TRICOT, LASIRE, Université de Lille, Villeneuve d’Ascq, France
    Przemyslaw GOLEBIEWSKI,
    Ryszard BUCZYNSKI,
    José FERREIRA, CICECO - Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    Hellmut ECKERT,

    person_pinHugo FERNANDES, CICECO - Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    S7-P124 - Glass- Crystallisation Synthesis and Characterisation of the New Ribbon-type Silicate Sr2Si3O8Euan DUNCAN, CEHMTI, orleans, France
    Amandine RIDOUARD, CEHMTI, orleans, France
    Franck FAYON, CEHMTI, orleans, France
    Cécile GENEVOIS, CEHMTI, orleans, France
    Mathieu ALLIX, CEHMTI, orleans, France
    Emmanuel VERON, CEHMTI, orleans, France
    Christopher COLLINS, University of Liverpool , Liverpool, United Kingdom
    Michael PITCHER, CEHMTI, orleans, France

    person_pinEuan DUNCAN, CEHMTI, orleans, France
    S7-P125 - Development of new barium borotellurite glasses and glass-ceramics  Graziella GUY,
    Gaëlle DELAIZIR, Institut de Recherche sur les Céramiques, UMR CNRS 7315 – Université de Limoges, 87068 Limoges, France, Limoges, France
    Julie CORNETTE, Institut de Recherche sur les Céramiques, UMR CNRS 7315 – Université de Limoges, 87068 Limoges, France, Limoges, France
    Maggy COLAS, Institut de Recherche sur les Céramiques, UMR CNRS 7315 – Université de Limoges, 87068 Limoges, France, Limoges, France
    Vincent COUDERC, Institut XLIM, UMR CNRS 7252 - Université de Limoges, 87060 Limoges, France, Limoges, France
    Philippe THOMAS, Institut de Recherche sur les Céramiques, UMR CNRS 7315 – Université de Limoges, 87068 Limoges, France, Limoges, France
    Jean-René DUCLÈRE, Institut de Recherche sur les Céramiques, UMR CNRS 7315 – Université de Limoges, 87068 Limoges, France, Limoges, France

    person_pinGraziella GUY, Institut de Recherche sur les Céramiques, UMR CNRS 7315 – Université de Limoges, 87068 Limoges, France, Limoges, France; Institut XLIM, UMR CNRS 7252 - Université de Limoges, 87060 Limoges, France, Limoges, France
    S7-P127 - Synthesis, structure and spectroscopy Studies of (x MgO, 100-x glass waste) to elaborate glass ceramics for dielectric propertiesNejet BENMORKAT, Research Unit Materials, Processes and Environment (UR-MPE), Faculty of Technology, University M’Hamed Bougara, Boumerdes, 35000, Algeria, boumerdes, Algeria
    Khaled BOUMCHEDDA, Research Unit Materials, Processes and Environment (UR-MPE), Faculty of Technology, University M’Hamed Bougara, Boumerdes, 35000, Algeria, boumerdes, Algeria

    person_pinNejet BENMORKAT, Research Unit Materials, Processes and Environment (UR-MPE), Faculty of Technology, University M’Hamed Bougara, Boumerdes, 35000, Algeria, boumerdes, Algeria
    S7-P128 - The effect of annealing on structural and mechanical properties of a ZrO2-SiO2 glass ceramicLena KLINTBERG, Uppsala University, Uppsala, Sweden
    Håkan ENGQVIST, Uppsala University, Uppsala, Sweden
    Wei XIA, Uppsala University, Uppsala, Sweden

    person_pinLena KLINTBERG, Uppsala University, Uppsala, Sweden
    S7-P129 - Thermal properties and plasma resistance of bismuth aluminosilicate glassesYoung Min BYUN,
    Jae Ho CHOI,
    Won Bin IM, Division of Materials Science and Engineering, Hanyang University, Seoul, Korea (Republic of)
    Hyeong Jun KIM, Engineering Materials Center, Korea Institute of Ceramic Engineering and Technology, Icheon, Korea (Republic of)

    person_pinYoung Min BYUN, Division of Materials Science and Engineering, Hanyang University, Seoul, Korea (Republic of); Engineering Materials Center, Korea Institute of Ceramic Engineering and Technology, Icheon, Korea (Republic of)
    S7-P130 - Accelerated life testing of chemically strengthened glass bottles using spray coatingYoung Min BYUN,
    Jae Ho CHOI,
    Won Bin IM, Division of Materials Science and Engineering, Hanyang University, Seoul, Korea (Republic of)
    Hyeong Jun KIM, Engineering Materials Center, Korea Institute of Ceramic Engineering and Technology, Icheon, Korea (Republic of)

    person_pinYoung Min BYUN, Division of Materials Science and Engineering, Hanyang University, Seoul, Korea (Republic of); Engineering Materials Center, Korea Institute of Ceramic Engineering and Technology, Icheon, Korea (Republic of)
    S7-P131 - Plasma etched surface morphology of quartz glass treated with ICP etching via fluorocarbon and argonJaeho CHOI,
    Young Min BYUN ,
    Won Bin IM , Hanyang University, Seoul, Korea (Republic of)
    Hyeong-Jun KIM , Korea Institute of Ceramic Engineering and Technology (KICET), Icheon-si, Korea (Republic of)

    person_pinJaeho CHOI, Korea Institute of Ceramic Engineering and Technology (KICET), Icheon-si, Korea (Republic of); Hanyang University, Seoul, Korea (Republic of)
    S7-P132 - Plasma resistant glasses as new advanced materials for LSI yields via reducing particulate contamination in ICP etching Jaeho CHOI,
    Young Min BYUN ,
    Won Bin IM , Hanyang University, Seoul, Korea (Republic of)
    Hyeong-Jun KIM , Korea Institute of Ceramic Engineering and Technology (KICET), Icheon, Korea (Republic of)

    person_pinJaeho CHOI, Korea Institute of Ceramic Engineering and Technology (KICET), Icheon, Korea (Republic of); Hanyang University, Seoul, Korea (Republic of)
    S7-P133 - Investigating the effect of different SiO2/P2O5 ratios on properties of a LAS glass-ceramic systemBünyamin ÖZTÜRK, R&D Center, Akcoat Advanced Chemical Coatings, Sakarya 2nd Organized Industrial Zone, Hendek 54300, Sakarya, Turkey
    Umit Engin ANIL, R&D Center, Akcoat Advanced Chemical Coatings, Sakarya 2nd Organized Industrial Zone, Hendek 54300, Sakarya, Turkey
    Süleyman Önder VAR??L?, R&D Center, Akcoat Advanced Chemical Coatings, Sakarya 2nd Organized Industrial Zone, Hendek 54300, Sakarya, Turkey
    Fahriye TA?K?RAN, R&D Center, Akcoat Advanced Chemical Coatings, Sakarya 2nd Organized Industrial Zone, Hendek 54300, Sakarya, Turkey
    Bursa ÇIÇEK, Department of Metallurgical and Materials Engineering, Yıldız Technical University, Esenler 34210, Istanbul , Turkey

    person_pinUmit Engin ANIL, R&D Center, Akcoat Advanced Chemical Coatings, Sakarya 2nd Organized Industrial Zone, Hendek 54300, Sakarya, Turkey
    S7-P134 - Investigation of structural, dielectric, and luminescent behaviors of 9/65/35 PLZT:Pr3+ ceramics, prepared by the gel-combustion routeMalgorzata PLONSKA, University of Silesia in Katowice, Faculty of Science and Technology, Institute of Materials Engineering, 75 Pułku Piechoty Str. 1a, Chorzów, Poland

    person_pinMalgorzata PLONSKA, University of Silesia in Katowice, Faculty of Science and Technology, Institute of Materials Engineering, 75 Pułku Piechoty Str. 1a, Chorzów, Poland
    S7-P136 - Obtaining of bactericide and viricide surfacesAdriana BELDA, Instituto Universitario de Tecnología Cerámica - Universitat Jaume I, Castellón, Spain
    Víctor CARNICER, Instituto Universitario de Tecnología Cerámica - Universitat Jaume I, Castellón, Spain
    María Dolores PALACIOS, Instituto Universitario de Tecnología Cerámica - Universitat Jaume I, Castellón, Spain
    María José ORTS, Instituto Universitario de Tecnología Cerámica - Universitat Jaume I, Castellón, Spain
    Sergio MESTRE, Instituto Universitario de Tecnología Cerámica - Universitat Jaume I, Castellón, Spain
    Eugeni CAÑAS, Instituto Universitario de Tecnología Cerámica - Universitat Jaume I, Castellón, Spain
    Mari Carmen SEGURA, Vernís S.A., Onda, Spain
    Sales IBIZA, AIDIMME, Paterna, Spain

    person_pinEugeni CAÑAS, Instituto Universitario de Tecnología Cerámica - Universitat Jaume I, Castellón, Spain
    S8-P138 - Effect of Vanadium on the local and average structure of -based oxide ion conductors
    person_pin
    S8-P140 - Water Sensing with High-entropy Oxide BaTi0.2­Hf0.2Zr0.2Y0.2Nb0.2O3Alexandra AUSTIN, Imperial College London, London, United Kingdom
    Shangxiong HUANGFU, Swiss Federal Laboratories for Materials Science, Dubendorf, Switzerland
    Jon BELL, Swiss Federal Laboratories for Materials Science, Dubendorf, Switzerland
    Amy KNORPP, Swiss Federal Laboratories for Materials Science, Dubendorf, Switzerland
    Katharina MARQUARDT, Imperial College London, London, United Kingdom
    Michael STUER, Swiss Federal Laboratories for Materials Science, Dubendorf, Switzerland

    person_pinKatharina MARQUARDT, Imperial College London, London, United Kingdom
    S8-P142 - (1-x)Na0.5Bi0.5TiO3 – xBaTiO3 ceramics doped with Eu3+ and Tb3+: dielectric and photoluminescence properties  Giovanna CANU, CNR-ICMATE, Genoa, Italy
    Maria Teresa BUSCAGLIA, CNR-ICMATE, Genoa, Italy
    Mohammed Hossei NATEQ, CNR-ICMATE, Genoa, Italy
    Alberto GIRIBALDI,
    Pamela ISOLA,
    Lidia ARMELAO,
    Gregorio BOTTARO,
    Vincenzo BUSCAGLIA, CNR-ICMATE, Genoa, Italy

    person_pinVincenzo BUSCAGLIA, CNR-ICMATE, Genoa, Italy
    S8-P144 - Polymer-grafted ceramic membranes for filtration applications  Fady NAHRA, VITO (Flemish institute for technological research), Mol, Belgium

    person_pinFady NAHRA, VITO (Flemish institute for technological research), Mol, Belgium
    S8-P145 - Investigation of microstructure and dielectric behaviour of hafnium-doped barium titanate ceramics prepared via sol-gel methodElena Mirabela SOARE, Institute of Physical Chemistry Ilie Murgulescu, Romanian Academy, 202 Splaiul Independenţei, 060021 Bucharest, Romania, Bucharest, Romania
    Catalina-Andreea STANCIU,
    Roxana PATRU, National Institute of Materials Physics, Atomistilor 405A, Magurele, Ilfov, 077125, Romania, Magurele, Romania
    Vasile-Adrian SURDU, Department of Oxide Materials Science & Engineering, Faculty of Applied Chemistry and Materials Science, “Politehnica” University of Bucharest, 1-7 Gh. Polizu, Bucharest, 011061, Romania, Bucharest, Romania
    Roxana-Doina TRUSCA, Department of Oxide Materials Science & Engineering, Faculty of Applied Chemistry and Materials Science, “Politehnica” University of Bucharest, 1-7 Gh. Polizu, Bucharest, 011061, Romania, Bucharest, Romania
    Bogdan Stefan VASILE, Department of Oxide Materials Science & Engineering, Faculty of Applied Chemistry and Materials Science, “Politehnica” University of Bucharest, 1-7 Gh. Polizu, Bucharest, 011061, Romania, Bucharest, Romania
    Ioana PINTILIE, National Institute for Lasers, Plasma and Radiation Physics, P.O. Box MG54, 077125, Magurele, Romania, Magurele, Romania
    Adelina-Carmen IANCULESCU, Department of Oxide Materials Science & Engineering, Faculty of Applied Chemistry and Materials Science, “Politehnica” University of Bucharest, 1-7 Gh. Polizu, Bucharest, 011061, Romania, Bucharest, Romania

    person_pinElena Mirabela SOARE, Institute of Physical Chemistry Ilie Murgulescu, Romanian Academy, 202 Splaiul Independenţei, 060021 Bucharest, Romania, Bucharest, Romania
    Adelina-Carmen IANCULESCU, Department of Oxide Materials Science & Engineering, Faculty of Applied Chemistry and Materials Science, “Politehnica” University of Bucharest, 1-7 Gh. Polizu, Bucharest, 011061, Romania, Bucharest, Romania
    S8-P146 - Structural, morphological, and optical properties of rare earth (erbium, ytterbium)-doped SrTiO3 ceramics. Catalina STANCIU, INFLPR, Bucharest, Romania
    Cristina TIHON, INFLPR, Bucharest, Romania
    George STANCIU, INFLPR, Bucharest, Romania
    Roxana TRUSCA, University Politehnica of Bucharest, Bucharest, Romania

    person_pinCatalina STANCIU, INFLPR, Bucharest, Romania
    S8-P147 - Disordered-P4bm phase in Na0.5Bi0.5TiO3-BaTiO3 and Na0.5Bi0.5TiO3-K0.5Bi0.5TiO3 lead-free piezoceramicsPooja PUNETHA, Indian Institute of Science Bangalore, Bangalore, India
    Gobinda DAS ADHIKARY , Indian Institute of Science Bangalore, Bangalore, India
    Pavan NUKALA, Indian Institute of Science Bangalore, Bangalore, India
    Rajeev RANJAN, Indian Institute of Science Bangalore, Bangalore, India

    person_pinPooja PUNETHA, Indian Institute of Science Bangalore, Bangalore, India
    S8-P151 - Development of saliva cortisol sensor with an interdigitated electrode platform based of barium titanate nanoparticlesMarylene Sousa Guimarães ROMA, Universidade de Brasília (UnB), Brasília, Brazil
    Juliano Alexandre CHAKER, Universidade de Brasília (UnB), Brasília, Brazil

    person_pinJuliano Alexandre CHAKER, Universidade de Brasília (UnB), Brasília, Brazil
    S8-P153 - Optical Properties and Light Scattering in Pyrochlore Transparent CeramicsSona HRÍBALOVÁ, University of Chemistry and Technology, Prague, Prague, Czechia
    Willi PABST, University of Chemistry and Technology, Prague, Prague, Czechia

    person_pinSona HRÍBALOVÁ, University of Chemistry and Technology, Prague, Prague, Czechia
    S8-P159 - Study of the chemical reactivity in the system (Co,Cu,Mg,Ni,Zn)O through multicomponent diffusion couplesMartina FRACCHIA,
    Mauro CODURI,
    Giulia MARANINI, University of Pavia, Pavia, Italy
    Andrea BIANCHI, University of Pavia, Pavia, Italy
    Paolo GHIGNA,
    Umberto ANSELMI TAMBURINI,

    person_pinMartina FRACCHIA, University of Pavia, Pavia, Italy; INSTM, National Inter-University Consortium for Materials Science and Technology, Via G. Giusti 9, 50121, Florence, Italy
    S8-P160 - Electronic structure and transport properties of A-site co-substituted SrTiO3-δ ceramics with enhanced configuration entropyNikola KANAS, Institute BioSense, Novi Sad, Serbia
    Reshma MADATHIL, Department of Chemistry, University of Oslo, Oslo, Norway
    Annu SHARMA, Nanofunctional Materials Technology Centre, Department of MME, IIT Madras, Madras, India
    Vladimir SRDIC, Department of Materials Engineering, Faculty of Technology, University of Novi Sad, Novi Sad, Serbia
    Bojan MILJEVIC, Department of Materials Engineering, Faculty of Technology, University of Novi Sad, Novi Sad, Serbia
    Srdjan RAKI?, Department of Physics, Faculty of Sciences, University of Novi Sad, Novi Sad, Serbia
    Subramshu BHATTACHARYA, Nanofunctional Materials Technology Centre, Department of MME, IIT Madras, Madras, India
    Stevan ARMAKOVIC, Department of Physics, Faculty of Sciences, University of Novi Sad, Novi Sad, Serbia

    person_pinNikola KANAS, Institute BioSense, Novi Sad, Serbia
    S8-P161 - Photoluminescence and scintillation properties of transparent Lu-_-SiAlON:Ce3+ ceramicsKohei AMINAKA, Yokohama National University, Yokohama, Japan
    Junichi TATAMI, Yokohama National University, Yokohama, Japan
    Motoyuki IIJIMA, Yokohama National University, Yokohama, Japan
    Akihiko ITO, Yokohama National University, Yokohama, Japan
    Shogen MATSUMOTO, Yokohama National University, Yokohama, Japan
    Takuma TAKAHASHI, Kanagawa Institute of Industrial Science and Technology, Ebina, Japan

    person_pinKohei AMINAKA, Yokohama National University, Yokohama, Japan
    S8-P163 - Co-optimization of microwave dielectric properties in Ba(Mg1/3Ta2/3)O3  ceramics through ordered domain engineeringXiao Li ZHU, Zhejiang University, Hangzhou, China

    person_pinXiao Li ZHU, Zhejiang University, Hangzhou, China
    S8-P164 - Fast and low-temperature densification of thermoelectric materials by non-conventional sintering techniquesCristina LIMERES, Instituto de Tecnología de Materiales ITM, Universitat Politècnica de València, Valencia, Spain
    Marta SUÁREZ, Centro de Investigación en Nanomateriales y nanotecnología CINN-CSIC, El Entrego, Spain
    Victoria G.ROCHA, Instituto de Ciencia y Tecnología del Carbono INCAR-CSIC, Oviedo, Spain
    Amparo BORRELL, Instituto de Tecnología de Materiales ITM, Universitat Politècnica de València, Valencia, Spain
    Rut BENAVENTE, Instituto de Tecnología de Materiales ITM, Universitat Politècnica de València, Valencia, Spain

    person_pinRut BENAVENTE, Instituto de Tecnología de Materiales ITM, Universitat Politècnica de València, Valencia, Spain
    S8-P165 - TRIBOLOGICAL INVESTIGATION ON SIC AND SIC-DIAMOND COMPOSITES FOR USE AS MECHANICAL SEALCaroline TSCHIRPKE, EagleBurgmann Germany GmbH & Co. KG, Wolfratshausen, Germany
    Jörg THELKE, EagleBurgmann Germany GmbH & Co. KG, Wolfratshausen, Germany
    Steffen KUNZE, Fraunhofer-Institut für Keramische Technologien und Systeme IKTS, Dresden, Germany
    Björn MATTHEY, Fraunhofer-Institut für Keramische Technologien und Systeme IKTS, Dresden, Germany

    person_pinCaroline TSCHIRPKE, EagleBurgmann Germany GmbH & Co. KG, Wolfratshausen, Germany
    S8-P167 - Spinodal Decomposition in Ferroelectric CrystalsCatherine BISHOP,

    person_pinCatherine BISHOP, University of Canterbury, Christchurch, New Zealand; MacDiarmid Institute for Advanced Materials and Nanotechnology, Christchurch, New Zealand
    S8-P169 - Magnetoelectric ceramic-metal composites with direct bonding of the ferroic components by spark plasma sinteringMiguel ALGUERÓ, Instituto de Ciencia de Materiales de Madrid (ICMM), CSIC, Madrid, Spain
    Harvey AMORÍN, Instituto de Ciencia de Materiales de Madrid (ICMM), CSIC, Madrid, Spain
    Cristina PASCUAL-GONZÁLEZ, Instituto de Ciencia de Materiales de Madrid (ICMM), CSIC, Madrid, Spain
    Pablo RAMOS, Departamento de Electrónica, Universidad de Alcalá, Madrid, Spain
    Alicia CASTRO, Instituto de Ciencia de Materiales de Madrid (ICMM), CSIC, Madrid, Spain

    person_pinMiguel ALGUERÓ, Instituto de Ciencia de Materiales de Madrid (ICMM), CSIC, Madrid, Spain
    S8-P170 - Crystal Structure and Microstructural Changes in (K0.5Na0.5)NbO3-SrTiO3 Solid-SolutionsGeon-Hee KIM, Department of Materials Engineering and Convergence Technology, Gyeongsang National University, Jinju, Korea (Republic of)
    Kyoung-Seok MOON, Department of Materials Engineering and Convergence Technology, Gyeongsang National University, Jinju, Korea (Republic of)

    person_pinGeon-Hee KIM, Department of Materials Engineering and Convergence Technology, Gyeongsang National University, Jinju, Korea (Republic of)
    S8-P171 - Electrochemical reduction as potential source of the instability of electrode interface in Na1/2Bi1/2TiO3-BaTiO3 piezoceramicsPengcheng HU, Technical University of Darmstadt, Darmstadt, Germany
    Binxiang HUANG, Technical University of Darmstadt, Darmstadt, Germany
    Bremecker DANIE, Technical University of Darmstadt, Darmstadt, Germany
    Jurij KORUZA, Graz University of Technology, Graz, Austria
    Andreas KLEIN, Technical University of Darmstadt, Darmstadt, Germany

    person_pinPengcheng HU, Technical University of Darmstadt, Darmstadt, Germany
    S8-P172 - Dependence of local atomic structure on piezoelectric properties of PbZr1−xTixO3 materialsIl-Gok HONG, Korea Institute of Ceramic Engineering & Technology, Jinju, Korea (Republic of)
    Chan-Yeup CHUNG, Korea Institute of Ceramic Engineering & Technology, Jinju, Korea (Republic of)
    Jong-In IM, Korea Institute of Ceramic Engineering & Technology, Jinju, Korea (Republic of)

    person_pinIl-Gok HONG, Korea Institute of Ceramic Engineering & Technology, Jinju, Korea (Republic of)
    S8-P173 - Two-step simulation of piezoelectric properties of porous PZT according to porosityJong-In IM, Korea Institute of Ceramic Engineering & Technology, Jinju, Korea (Republic of)
    Il-Gok HONG, Korea Institute of Ceramic Engineering & Technology, Jinju, Korea (Republic of)
    Ho-Yong SHIN, Korea Institute of Ceramic Engineering & Technology, Jinju, Korea (Republic of)
    Chan-Yeup CHUNG, Korea Institute of Ceramic Engineering & Technology, Jinju, Korea (Republic of)

    person_pinJong-In IM, Korea Institute of Ceramic Engineering & Technology, Jinju, Korea (Republic of)
    S8-P175 - Drastic decrease of thermal conductivity and ZT improvement on CaMnO3 ceramics by Y, La, and Yb codopingMaría A. MADRE, Universidad de Zaragoza, Zaragoza, Spain
    Hippolyte AMAVEDA, Universidad de Zaragoza, Zaragoza, Spain
    Oscar J. DURA, Departamento de Física Aplicada (Universidad de Castilla-La Mancha), Ciudad Real, Spain
    Denis PELLOQUIN, Normandie Univ, ENSICAEN, UNICAEN, CNRS, CRISMAT, Caen, France
    Mario MORA, Universidad de Zaragoza, Zaragoza, Spain
    Miguel A. TORRES, Universidad de Zaragoza, Zaragoza, Spain
    Sylvain MARINEL, Normandie Univ, ENSICAEN, UNICAEN, CNRS, CRISMAT, Caen, France
    Andres SOTELO, Universidad de Zaragoza, Zaragoza, Spain

    person_pinMaría A. MADRE, Universidad de Zaragoza, Zaragoza, Spain
    S8-P176 - Evolution of microstructure and elastic properties of pure ZnO and SnO2 ceramics and its composites during conventional sintering Petra ŠIMONOVÁ, Department of Glass and Ceramics, University of Chemistry and Technology, Prague, Czechia
    Lucie KOTRBOVÁ, Department of Glass and Ceramics, University of Chemistry and Technology, Prague, Czechia
    Tereza UHLÍ?OVÁ, Department of Glass and Ceramics, University of Chemistry and Technology, Prague, Czechia
    Petr BEZDICKA, Institute of Inorganic Chemistry of the Czech Academy of Sciences, Řež, Czechia
    Willi PABST, Department of Glass and Ceramics, University of Chemistry and Technology, Prague, Czechia

    person_pinPetra ŠIMONOVÁ, Department of Glass and Ceramics, University of Chemistry and Technology, Prague, Czechia
    S8-P178 - Building of Devices with Hafnium-Silicate and Zirconium-Silicate Based Ceramic MaterialsFuhsiang KO, NATIONAL YANG MING CHIAO TUNG UNIVERSITY, HSINCHU, Taiwan

    person_pinFuhsiang KO, NATIONAL YANG MING CHIAO TUNG UNIVERSITY, HSINCHU, Taiwan
    S9-P309 - Sintering behaviour and mechanicOlesya KAPITANOVA,
    Xu XIEYU, Lomonosov Moscow State University, Moscow, RUSSIA
    Ilya YAKOVLEV,
    Alina KIRIANOVA,
    Diancheng ZHOU, Shenzhen MSU-BIT University, Shenzhen, CHINA
    Liu XUANYU, Shenzhen MSU-BIT University, Shenzhen, CHINA
    Dimitriy ZIMBOVSKY,
    Pavel EVDOKIMOV,
    Valentin VOLKOV, Emerging Technologies Research center,XPANCEO, Dubai, UAE
    Irina VESELOVA, Lomonosov Moscow State University, Moscow, RUSSIA
    Valery PUTLAYEV, Lomonosov Moscow State University, Moscow, RUSSIA

    person_pinOlesya KAPITANOVA, Autonomous Noncommercial Organization “ID&AS: Inter-Disciplinary & Advanced Studies Center”, Moscow, RUSSIA; Lomonosov Moscow State University, Moscow, RUSSIA
    S9-P-310 - Ultra-thick LATP-LFP ceramic cathodes by HPLT for high performance All Solid-State Li-Metal BatteriesBlanca I. ARIAS-SERRANO, Universidad Carlos III de Madrid, UC3M, Madrid, Spain
    Iván Auñón RODRÍGUEZ DE LOS SANTOS, Universidad Carlos III de Madrid, UC3M, Madrid, Spain
    Ignacio ROMERO GARCÍA, Universidad Carlos III de Madrid, UC3M, Madrid, Spain
    Belén LEVENFELD LAREDO, Universidad Carlos III de Madrid, UC3M, Madrid, Spain
    Alejandro VÁREZ ÁLVAREZ, Universidad Carlos III de Madrid, UC3M, Madrid, Spain

    person_pinAlejandro VÁREZ ÁLVAREZ, Universidad Carlos III de Madrid, UC3M, Madrid, Spain
    S9-LP-303 - Study of the influence of steel pre-oxidation on protective layers used in SOC technologyMonika LAZOR,
    Leszek AJDYS,
    Blanka SEREDY?SKA, Chemical Faculty, Warsaw University of Technology, Noakowskiego 3 Street, Warsaw, Poland
    Agnieszka ZURAWSKA,
    Yevgeniy NAUMOVICH,
    Paulina WIECINSKA, Chemical Faculty, Warsaw University of Technology, Noakowskiego 3 Street, Warsaw, Poland

    person_pinMonika LAZOR, Center for Hydrogen Technologies CTH2, Institute of Power Engineering, Augustowka 36 Street, Warsaw, Poland; Department of High Temperature Electrochemical Processes, Institute of Power Engineering, Augustowka 36 Street, Warsaw, Poland; Doctoral School, Warsaw University of Technology, Politechniki 1 Square, Warsaw, Poland; Chemical Faculty, Warsaw University of Technology, Noakowskiego 3 Street, Warsaw, Poland
    S9-LP-302 - Spinel CuMn1.9Fe0.1O4 as promising material for protective layers for SOC stack componentsLeszek AJDYS,
    Agnieszka ZURAWSKA,
    Yevgeniy NAUMOVICH,
    Paulina WIECINSKA, Faculty of Chemistry, Warsaw University of Technology, Noakowskiego 3, 00-664 Warsaw, Poland, Warsaw, Poland
    Magdalena KOSIOREK,
    Monika LAZOR,

    person_pinLeszek AJDYS, Institute of Power Engineering, Mory 8, 01-330 Warsaw, Poland, Warsaw, Poland; Center for Hydrogen Technologies CTH2, Institute of Power Engineering, Augustowka 36, 02-981 Warsaw, Poland, Warsaw, Poland; Doctoral School, Warsaw University of Technology, Plac Politechniki 1, 00-661 Warsaw, Poland, Warsaw, Poland; Faculty of Chemistry, Warsaw University of Technology, Noakowskiego 3, 00-664 Warsaw, Poland, Warsaw, Poland
    S9-LP-299 - New Synthesis Route of Eco-Friendly Ceramic Yttrium (III) Oxide/Keratin Composite Materials for Biodegradable DevicesFu-Hsiang KO, NATIONAL YANG MING CHIAO TUNG UNIVERSITY, HSINCHU, Taiwan

    person_pinFu-Hsiang KO, NATIONAL YANG MING CHIAO TUNG UNIVERSITY, HSINCHU, Taiwan
    S9-LP-298 - Evolution of structure, phase composition, particle morphology and dielectric properties of Cu2O-based CCTO ceramic materials.Salim BRAHIMI, Research Unit Materials, Processes and Environment, Faculty of Technology, University M'Hamed Bougara, Boumerdes, Algeria
    Rabah DJAFAR, Research Unit Materials, Processes and Environment, Faculty of Technology, University M'Hamed Bougara, Boumerdes, Algeria
    Didier FASQUELLE, Unit of Dynamics and Structure of Molecular Materials, University of Littoral Côte d’Opale, Calais, France
    Ahcène CHAOUCHI, Laboratory of Applied Chemistry and Chemical Engineering, Faculty of Sciences, Mouloud Mammeri University, Tizi-Ouzou, Algeria
    Stefano BELLUCCI, Istituto Nazionale di Fisica Nucleare - Laboratori Nazionali di Frascati LNF, Rome, Italy
    Mohamed BOUOUDINA, Department of Mathematics and Science, Faculty of Humanities and Sciences, Prince Sultan University, Riyadh, Saudi Arabia
    Khaled BOUMCHEDDA, Research Unit Materials, Processes and Environment, Faculty of Technology, University M'Hamed Bougara, Boumerdes, Algeria

    person_pinSalim BRAHIMI, Research Unit Materials, Processes and Environment, Faculty of Technology, University M'Hamed Bougara, Boumerdes, Algeria
    S9-LP-296 - High-temperature degradation of transformable tetragonal zirconia in solid oxide cells: a challenge for mechanical reliabilityPeyman KHAJAVI, Department of Energy Conversion and Storage, Technical University of Denmark, 2800 Kgs. Lyngby, Denmark
    Peter VANG HENDRIKSEN, Department of Energy Conversion and Storage, Technical University of Denmark, 2800 Kgs. Lyngby, Denmark
    Henrik LUND FRANDSEN, Department of Energy Conversion and Storage, Technical University of Denmark, 2800 Kgs. Lyngby, Denmark

    person_pinPeyman KHAJAVI, Department of Energy Conversion and Storage, Technical University of Denmark, 2800 Kgs. Lyngby, Denmark
    S9-P-307 - Optimisation of Sr3Fe2O7-d-based Ruddlesden-Popper-type Phases as Air Electrodes for Solid Oxide Electrolysis CellsÁlvaro VÁZQUEZ-NAVALMORAL, Instituto de Cerámica y Vidrio, CSIC, Madrid, Spain
    Laura IBÁÑEZ-GÓMEZ, The Chemistry Department, University of Aberdeen, Aberdeen, United Kingdom
    Susana GARCÍA-MARTÍN, Departamento de Química Inorgánica I, Facultad de Ciencias Químicas, Universidad Complutense, Madrid, Spain
    Domingo PÉREZ-COLL, Instituto de Cerámica y Vidrio, CSIC, Madrid, Spain
    Glenn C. MATHER, Instituto de Cerámica y Vidrio, CSIC, Madrid, Spain

    person_pinGlenn C. MATHER, Instituto de Cerámica y Vidrio, CSIC, Madrid, Spain
    S9-P179 - On the electrochemical behavior of novel hybrid polymer electrolytes for Li-ion batteriesMaria Teresa PÉREZ PRIOR, Universidad Carlos III de Madrid, UC3M, Madrid, Spain
    Sydonne L. SWABY MARTÍNEZ, Universidad Carlos III de Madrid, UC3M, Madrid, Spain
    Blanca I. ARIAS-SERRANO, Universidad Carlos III de Madrid, UC3M, Madrid, Spain
    Nieves UREÑA TORRES, Universidad Carlos III de Madrid, UC3M, Madrid, Spain
    Deborath Mariana REINOSO, Instituto de Química del Sur (INQUISUR), CONICET, Bahía Blanca , Argentina
    Alejandro VÁREZ ÁLVAREZ, Universidad Carlos III de Madrid, UC3M, Madrid, Spain
    Belén LEVENFELD LAREDO, Universidad Carlos III de Madrid, UC3M, Madrid, Spain

    person_pinAlejandro VÁREZ ÁLVAREZ, Universidad Carlos III de Madrid, UC3M, Madrid, Spain
    S9-P180 - Smart functional polymer-ceramic composites for sustainable energy harvesting and storageMaria Teresa BUSCAGLIA, CNR-ICMATE, Institute of Condensed Matter Chemistry and Technologies for Energy, National Research Council, Via de Marini 6, Genoa, Italy
    Paola STAGNARO, CNR-SCITEC, Institute of Chemical Sciences and Technologies “Giulio Natta”, National Research Council, Via de Marini 6, Genoa, Italy
    Lavinia-Petronela CURECHERIU, Faculty of Physics, Alexandru Ioan Cuza University, Blv. Carol I, nr.11, 700506, Iasi, Romania
    Giovanna CANU, CNR-ICMATE, Institute of Condensed Matter Chemistry and Technologies for Energy, National Research Council, Via de Marini 6, Genoa, Italy
    Elisa MERCADELLI, CNR-ISTEC, Institute of Science and Technology for Ceramics, National Research Council, Via Granarolo 64, Faenza, Italy
    Mirjana VIJATOVI? PETROVI?, Institute for Multidisciplinary Research, University of Belgrade, Kneza Viseslava 1, Belgrade, Serbia
    Floriana CRACIUN, CNR-ISM, Institute of Structure of Matter, National Research Council, Via del Fosso del Cavaliere, 100, Rome, Italy
    Andreea Irina BARZIC, “Petru Poni” Institute of Macromolecular Chemistry, Aleea Grigore Ghica Voda 41A, Iasi, Romania
    Liliana MITOSERIU, Faculty of Physics, Alexandru Ioan Cuza University, Blv. Carol I, nr.11, 700506, Iasi, Romania
    Vincenzo BUSCAGLIA, CNR-ICMATE, Institute of Condensed Matter Chemistry and Technologies for Energy, National Research Council, Via de Marini 6, Genoa, Italy

    person_pinGiovanna CANU, CNR-ICMATE, Institute of Condensed Matter Chemistry and Technologies for Energy, National Research Council, Via de Marini 6, Genoa, Italy
    S9-P181 - Highly and Hierarchically Porous Silicon Oxycarbide Derived Carbon Materials as Electrodes for Energy Storage ApplicationsJosé MÉRIDA,
    María Teresa COLOMER, Instituto de Cerámica y Vidrio, CSIC, Madrid, Spain
    Tamayo AITANA, Instituto de Cerámica y Vidrio, CSIC, Madrid, Spain
    Fausto RUBIO , Instituto de Cerámica y Vidrio, CSIC, Madrid, Spain
    María Alejandra MAZO, Instituto de Cerámica y Vidrio, CSIC, Madrid, Spain

    person_pinMaría Teresa COLOMER, Instituto de Cerámica y Vidrio, CSIC, Madrid, Spain
    S9-P182 - Thick Li4Ti5O12-C high-capacity electrodes processed by powder injection molding  Ignacio ROMERO-GARCIA, UNIVERSIDAD CARLOS III DE MADRID, LEGANES, Spain
    Maria Eugenia SOTOMAYOR, UNIVERSIDAD CARLOS III DE MADRID, LEGANES, Spain
    Belen LEVENFELD, UNIVERSIDAD CARLOS III DE MADRID, LEGANES, Spain
    Alejandro VAREZ, UNIVERSIDAD CARLOS III DE MADRID, LEGANES, Spain

    person_pinAlejandro VAREZ, UNIVERSIDAD CARLOS III DE MADRID, LEGANES, Spain
    S9-P184 - Synthesis of BCZYYb electrolyte material for solid oxide cells applications  Francesca BAGIONI, Institute of Science, Technology and Sustainability for Ceramics (ISSMC) - National Research Council (CNR), Faenza, Italy
    Angela GONDOLINI, Institute of Science, Technology and Sustainability for Ceramics (ISSMC) - National Research Council (CNR), Faenza, Italy
    Elisa MERCADELLI, Institute of Science, Technology and Sustainability for Ceramics (ISSMC) - National Research Council (CNR), Faenza, Italy
    Alessandra SANSON, Institute of Science, Technology and Sustainability for Ceramics (ISSMC) - National Research Council (CNR), Faenza, Italy

    person_pinFrancesca BAGIONI, Institute of Science, Technology and Sustainability for Ceramics (ISSMC) - National Research Council (CNR), Faenza, Italy
    S9-P186 - Atomic layer deposition application for silicon-graphite anodeAlper GÜNEREN,

    person_pinAlper GÜNEREN, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Bratislava, Slovakia; Centre for Advanced Materials Application, Slovak Academy of Sciences, Bratislava, Slovakia
    S9-P187 - The study of 8YSZ electrolyte fabrication of the tubular solid oxide fuel cells by the dip-coating methodYi Chu HAN, National Taipei University of Technology, Taipei, Taiwan
    Yung Chin YANG, National Taipei University of Technology, Taipei, Taiwan

    person_pinYung Chin YANG, National Taipei University of Technology, Taipei, Taiwan
    S9-P188 - Colloidal Processing based Growth of BaZr0.8Yb0.2O2.9 Nanoparticles toward Lower Temperature Sintering of PCFC electrolyteRyushi SUEZAKI, Gunma University, Kiryu, Japan
    Naokatsu KANNARI, Gunma University, Kiryu, Japan
    Kazuyoshi SATOU, Gunma University, Kiryu, Japan

    person_pinRyushi SUEZAKI, Gunma University, Kiryu, Japan
    S9-P189 - PVDF-HFP/LLZO Fibers Composite for High Performance Electrolyte Structure for Solid State Lithium BatteriesJoo-Young HAN, Kwangwoon University, Seoul, Korea (Republic of)
    Sung Hyun KANG, Kwangwoon University, Seoul, Korea (Republic of)
    Seulgi SHIN, Kwangwoon University, Seoul, Korea (Republic of)
    So Yeon PARK, Kwangwoon University, Seoul, Korea (Republic of)
    Hiesang SOHN, Kwangwoon University, Seoul, Korea (Republic of)
    Weon Ho SHIN, Kwangwoon University, Seoul, Korea (Republic of)

    person_pinJoo-Young HAN, Kwangwoon University, Seoul, Korea (Republic of)
    S9-P190 - Synthesis and Thermoelectric Properties of CrSb-based MaterialsSung Hyun KANG, KWANGWOON UNIVERSITY, Seoul, Korea (Republic of)
    Jeong Min LEE, KWANGWOON UNIVERSITY, Seoul, Korea (Republic of)
    Weon Ho SHIN, KWANGWOON UNIVERSITY, Seoul, Korea (Republic of)

    person_pinSung Hyun KANG, KWANGWOON UNIVERSITY, Seoul, Korea (Republic of)
    S9-P191 - The preparation and performance of MoS2 incorporated LATP solid electrolytes for all solid state lithium ion batteriesSo Yeon PARK, kwangwoon university, Seoul, Korea (Republic of)
    Seulgi SHIN, kwangwoon university, Seoul, Korea (Republic of)
    Sung Hyun KANG, kwangwoon university, Seoul, Korea (Republic of)
    Joo-Young HAN, kwangwoon university, Seoul, Korea (Republic of)
    Weon Ho SHIN, kwangwoon university, Seoul, Korea (Republic of)

    person_pinSo Yeon PARK, kwangwoon university, Seoul, Korea (Republic of)
    S9-P192 - (MnCuFe)3O4 ceramic coatings for high-temperature corrosion protection of solid oxide cell interconnectsSebastian MOLIN, Gdańsk University of Technology, Gdańsk, Poland
    Justyna IGNACZAK, Gdańsk University of Technology, Gdańsk, Poland
    Omid EKHLASIOSGOUEI, Gdańsk University of Technology, Gdańsk, Poland
    Piotr JASINSKI, Gdańsk University of Technology, Gdańsk, Poland

    person_pinSebastian MOLIN, Gdańsk University of Technology, Gdańsk, Poland
    S9-P193 - Manufacturing and Co-Sintering of Li-Garnet-Electrolyte Tapes for Li-metal batteriesSteffen WEINMANN, Technical University Munich, Munich, Germany
    Jennifer RUPP,
    Kunjoong KIM, Technical University Munich, Munich, Germany

    person_pinSteffen WEINMANN, Technical University Munich, Munich, Germany
    S9-P195 - Forming Ni-Fe and Co-Fe alloys on the surface of (La,Sr,Ce)(Me,Ti)O3 via topotactic ion-exchange exsolutionKinga KUJAWSKA, Advanced Materials Center, Faculty of Applied Physics and Mathematics, Gdansk University of Technology, ul. G. Narutowicza 11/12, 80-233 Gdańsk, Poland
    Wojciech KOLICSKI, Advanced Materials Center, Faculty of Applied Physics and Mathematics, Gdansk University of Technology, ul. G. Narutowicza 11/12, 80-233 Gdańsk, Poland
    Agata DUCKA, Advanced Materials Center, Faculty of Applied Physics and Mathematics, Gdansk University of Technology, ul. G. Narutowicza 11/12, 80-233 Gdańsk, Poland
    Patryk BLASZCZAK, Advanced Materials Center, Faculty of Applied Physics and Mathematics, Gdansk University of Technology, ul. G. Narutowicza 11/12, 80-233 Gdańsk, Poland
    Beata BOCHENTYN, Advanced Materials Center, Faculty of Applied Physics and Mathematics, Gdansk University of Technology, ul. G. Narutowicza 11/12, 80-233 Gdańsk, Poland

    person_pinAgata DUCKA, Advanced Materials Center, Faculty of Applied Physics and Mathematics, Gdansk University of Technology, ul. G. Narutowicza 11/12, 80-233 Gdańsk, Poland
    S9-P196 - Lead-free BaTiO3-based porous ceramics with the enhanced piezoelectric figure of merit for energy harvesting applicationsCristina CIOMAGA, Department of Exact and Natural Sciences, Institute of Interdisciplinary Research, Alexandru Ioan Cuza University of Iasi, Carol I, 700506, Iasi, Romania, Iasi, Romania
    Nadejda HORCHIDAN, Department of Exact and Natural Sciences, Institute of Interdisciplinary Research, Alexandru Ioan Cuza University of Iasi, Carol I, 700506, Iasi, Romania, Iasi, Romania
    Ioan DUMITRU,
    Florin Mihai TUFESCU, Department of Exact and Natural Sciences, Institute of Interdisciplinary Research, Alexandru Ioan Cuza University of Iasi, Carol I, 700506, Iasi, Romania, Iasi, Romania

    person_pinCristina CIOMAGA, Department of Exact and Natural Sciences, Institute of Interdisciplinary Research, Alexandru Ioan Cuza University of Iasi, Carol I, 700506, Iasi, Romania, Iasi, Romania
    S9-P197 - Cycling demonstration of Sequential Deposition Synthesis-synthesized lithium garnet films in full batteriesJesse HINRICHER, Massachusetts Institute of Technology, Cambridge, United States
    Chae-Ah KIM, Samsung Research America, Cambridge, United States
    Heung Chan LEE, Samsung Advanced Institute of Technology, Seoul, Korea (Republic of)
    Lincoln MIARA, Samsung Research America, Cambridge, United States
    Zachary HOOD, Massachusetts Institute of Technology, Cambridge, United States
    Andrea MAURANO, Samsung Research America, Cambridge, United States
    Won Seok CHANG, Samsung Advanced Institute of Technology, Seoul, Korea (Republic of)
    Jeong-Ju CHO, Samsung Research America, Cambridge, United States
    Jennifer RUPP,

    person_pinJesse HINRICHER, Massachusetts Institute of Technology, Cambridge, United States
    S9-P198 - Eosin Y dye intercalation into layered double hydroxides as strategy to increase solar cell photoanodes efficiency and stabilityAndrea FASOLINI, University of Bologna - Department of Industrial Chemistry "Toso Montanari", Bologna, Italy
    Nicola SANGIORGI, CNR-ISSMC (former ISTEC), Faenza, Italy
    Eleonora TOSI BRANDI, University of Bologna - Department of Industrial Chemistry "Toso Montanari", Bologna, Italy
    Alex SANGIORGI, CNR-ISSMC (former ISTEC), Faenza, Italy
    Federica MARIANI , University of Bologna - Department of Industrial Chemistry "Toso Montanari", Bologna, Italy
    Erica SCAVETTA, University of Bologna - Department of Industrial Chemistry "Toso Montanari", Bologna, Italy
    Alessandra SANSON, CNR-ISSMC (former ISTEC), Faenza, Italy
    Francesco BASILE, University of Bologna - Department of Industrial Chemistry "Toso Montanari", Bologna, Italy

    person_pinAlex SANGIORGI, CNR-ISSMC (former ISTEC), Faenza, Italy
    S9-P199 - Exsolution of metallic nanoparticles on the surface of La/Ce-doped SrTiO3 acting as an anode candidate for Solid Oxide Fuel CellsAmanuel GIRMA BERHANU, Advanced Materials Center, Institute of Nanotechnology and Materials Engineering, Faculty of Applied Physics and Mathematics, Gdansk University of Technology, 80-233 Gdańsk, ul. Narutowicza 11/12, Poland, Gdańsk, Poland
    Patryk BLASZCZAK, Advanced Materials Center, Institute of Nanotechnology and Materials Engineering, Faculty of Applied Physics and Mathematics, Gdansk University of Technology, 80-233 Gdańsk, ul. Narutowicza 11/12, Poland, Gdańsk, Poland
    Agata DUCKA, Advanced Materials Center, Institute of Nanotechnology and Materials Engineering, Faculty of Applied Physics and Mathematics, Gdansk University of Technology, 80-233 Gdańsk, ul. Narutowicza 11/12, Poland, Gdańsk, Poland
    Beata BOCHENTYN, Advanced Materials Center, Institute of Nanotechnology and Materials Engineering, Faculty of Applied Physics and Mathematics, Gdansk University of Technology, 80-233 Gdańsk, ul. Narutowicza 11/12, Poland, Gdańsk, Poland

    person_pinPatryk BLASZCZAK, Advanced Materials Center, Institute of Nanotechnology and Materials Engineering, Faculty of Applied Physics and Mathematics, Gdansk University of Technology, 80-233 Gdańsk, ul. Narutowicza 11/12, Poland, Gdańsk, Poland
    S9-P200 - Development of a solar-thermal driven membrane reactor for green hydrogen generationFalk SCHULZE-KÜPPERS, Forschungszentrum Jülich GmbH, Central Institute of Engineering, Electronics and Analytics (ZEA-1), Jülich, Germany
    Fanlin ZENG, Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research (IEK-1), Jülich, Germany
    Kai BITTNER, Forschungszentrum Jülich GmbH, Central Institute of Engineering, Electronics and Analytics (ZEA-1), Jülich, Germany
    Bernd BÜDDEFELD, Forschungszentrum Jülich GmbH, Central Institute of Engineering, Electronics and Analytics (ZEA-1), Jülich, Germany
    Xinfang LI, Forschungszentrum Jülich GmbH, Central Institute of Engineering, Electronics and Analytics (ZEA-1), Jülich, Germany
    Thomas KOPPITZ, Forschungszentrum Jülich GmbH, Central Institute of Engineering, Electronics and Analytics (ZEA-1), Jülich, Germany
    Wendelin DEIBERT, Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research (IEK-1), Jülich, Germany
    Sonja GROß-BARSNICK, Forschungszentrum Jülich GmbH, Central Institute of Engineering, Electronics and Analytics (ZEA-1), Jülich, Germany
    Nikolaos MARGARITIS, Forschungszentrum Jülich GmbH, Central Institute of Engineering, Electronics and Analytics (ZEA-1), Jülich, Germany
    Nicole NEUMANN, German Aerospace Center, Institute of Future Fuels, Cologne, Germany
    Ghaleb NATOUR, Forschungszentrum Jülich GmbH, Central Institute of Engineering, Electronics and Analytics (ZEA-1), Jülich, Germany
    Stefan BAUMANN, Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research (IEK-1), Jülich, Germany

    person_pinFanlin ZENG, Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research (IEK-1), Jülich, Germany
    S9-P202 - Aqueous Growth of NiO-YSZ Nanocomposite Particles Toward Efficient Hydrogen Generation at Solid Oxide Electrolysis CellsYurika SONE, Gunma University, Kiryu, Japan
    Naokatsu KANNARI, Gunma University, Kiryu, Japan
    Kazuyoshi SATO, Gunma University, Kiryu, Japan

    person_pinYurika SONE, Gunma University, Kiryu, Japan
    S9-P206 - DFT study of ternary tungstates for (photo)electrochemical water splittingBosi HUANG, School of Materials Science and Engineering, UNSW Sydney, Sydney, Australia
    Judy HART, School of Materials Science and Engineering, UNSW Sydney, Sydney, Australia

    person_pinJudy HART, School of Materials Science and Engineering, UNSW Sydney, Sydney, Australia
    S9-P207 - Setting up the first mechanical creep tests on irradiated nuclear ceramics to understand spent fuel viscoplastic behaviorHugo FUENTES,
    Christian COLIN, CEA Cadarache, Saint-Paul-lez-Durance, France
    Thomas HELFER, CEA Cadarache, Saint-Paul-lez-Durance, France
    Adrien SOCIE, CEA Cadarache, Saint-Paul-lez-Durance, France
    Frederic LEBON, Laboratoire de Mécanique et d'Acoustique, Marseille, France

    person_pinHugo FUENTES, CEA Cadarache, Saint-Paul-lez-Durance, France; Laboratoire de Mécanique et d'Acoustique, Marseille, France
    S9-P208 - Thermoelectrical Properties of B4C, SiC and TiCSinem BIRCAN, Eskisehir Technical University, Eskisehir, Turkey
    Salih Cagri OZER, Eskisehir Technical University, Eskisehir, Turkey
    Kartal ARSLAN, Eskisehir Technical University, Eskisehir, Turkey
    Servet TURAN,

    person_pinServet TURAN, Eskisehir Technical University, Eskisehir, Turkey; MDA Advanced Ceramics, Eskisehir, Turkey
    S9-P209 - Two-step sintering preparation of pyrochlore glass-ceramics for immobilization of actinide-rich nuclear wastes  Hongru JIN, Northwestern Polytechnical University, Xi'an, China
    Chong WEI,
    Xiaoqiang LI, Northwestern Polytechnical University, Xi'an, China

    person_pinHongru JIN, Northwestern Polytechnical University, Xi'an, China
    S9-P216 - Optimization of thermoelectric properties of Bi2Ca2Co2Ox thick films through partial meltingAndres SOTELO,
    Hippolyte AMAVEDA,
    Mario MORA,
    Miguel A. TORRES,
    Maria A. MADRE,

    person_pinAndres SOTELO, Universidad de Zaragoza, Zaragoza, Spain; Institute of Nanoscience and Materials of Aragon, Zaragoza, Spain
    S9-P217 - Perovskite-Type Ceramic Nano-rod Coated Separators for High-Performance Lithium-Sulfur BatteriesJou-Hyeon AHN, Gyeongsang National University, Jinju, Korea (Republic of)
    Ying LIU, Gyeongsang National University, Jinju, Korea (Republic of)

    person_pinJou-Hyeon AHN, Gyeongsang National University, Jinju, Korea (Republic of)
    S9-P218 - New materials for ceramic solar receivers with improved durabilityM-Magdalena LORENTE-AYZA, Asociación de Investigación de las Industrias Cerámicas (ITC-AICE), Castellón, Spain
    Javier GARCÍA-TEN, Asociación de Investigación de las Industrias Cerámicas (ITC-AICE), Castellón, Spain
    Marisa SORIANO, Asociación de Investigación de las Industrias Cerámicas (ITC-AICE), Castellón, Spain
    Jose PLANELLES-ARAGÓ, Asociación de Investigación de las Industrias Cerámicas (ITC-AICE), Castellón, Spain
    Inmaculada CAÑADAS, CIEMAT - Plataforma Solar de Almería, Tabernas, Spain
    Diego MARTÍNEZ, CIEMAT - Plataforma Solar de Almería, Tabernas, Spain
    Jose RODRIGUEZ-GARCÍA, CIEMAT - Plataforma Solar de Almería, Tabernas, Spain

    person_pinM-Magdalena LORENTE-AYZA, Asociación de Investigación de las Industrias Cerámicas (ITC-AICE), Castellón, Spain
    S9-P219 - Ni-doping influence on functional properties of STF35 for use as oxygen transport membranes in membrane reactorsYuning TANG, Forschungszentrum Jülich GmbH, Jülich, Germany
    Stefan BAUMANN, Forschungszentrum Jülich GmbH, Jülich, Germany
    Michael MÜLLER, Forschungszentrum Jülich GmbH, Jülich, Germany
    Arian NIJMEIJER, University of Twente, Enschede, Netherlands
    Wilhelm A. MEULENBERG,

    person_pinYuning TANG, Forschungszentrum Jülich GmbH, Jülich, Germany
    S9-P220 - Sustainable Manufacturing of Solid-Oxide Fuel Cells Through Cold Sintering of Electrode MaterialsKathy SABOLSKY, West Virginia University, Morgantown, United States
    Alexander DOIRON, West Virginia University, Morgantown, United States
    Charity STEPP, West Virginia University, Morgantown, United States
    Saad WASEEM, West Virginia University, Morgantown, United States
    Cole KLEMSTINE, West Virginia University, Morgantown, United States
    Joshua TENNEY, West Virginia University, Morgantown, United States
    Edward SABOLSKY, West Virginia University, Morgantown, United States

    person_pinKathy SABOLSKY, West Virginia University, Morgantown, United States
    S9-P221 - Energy Harvesting with Piezoelectric Flexible Composite Beams.Bürsa TURAN, Nanotech Advanced Ceramic Company, Eskişehir, Turkey
    Nazif AKDERE, Nanotech Advanced Ceramic Company, Eskişehir, Turkey
    Kagan KAYACI, Kaleseramik R&D Innovation Center, Çanakkale, Turkey
    Serdar ÖZCAN, Kaleseramik R&D Innovation Center, Çanakkale, Turkey
    Ayden DOGAN,

    person_pinAyden DOGAN, Eskişehir Technical University, Materials Science and Engineering Department, Eskişehir, Turkey; Nanotech Advanced Ceramic Company, Eskişehir, Turkey
    S9-P222 - ZnO films towards gas sensingCesar FOSCHINI, Department of Mechanical Engineering, Universidade Estadual Paulista - UNESP, Bauru, Brazil
    Luana CARVALHO, Department of Mechanical Engineering, Universidade Estadual Paulista - UNESP, Bauru, Brazil
    Helmut BAUMGART, Department of Electrical and Computer Engineering, Old Dominion University - ODU, Norfolk, United States
    Alexandre SIMÕES, School of Engineering of Guaratinguetá, Universidade Estadual Paulista - UNESP, Guaratinguetá, Brazil
    Miguel PONCE, Instituto de Ciência e Tecnologia de Materiais, Universidade Nacional de Mar Del Plata, Mar del Plata, Argentina

    person_pinCesar FOSCHINI, Department of Mechanical Engineering, Universidade Estadual Paulista - UNESP, Bauru, Brazil
    S9-P223 - ECo-Stock SOLUtions for complex industrial waste heat (SOLUTEC)Isis DUREUIL, Université de Toulouse, IMT Mines Albi, CNRS UMR 5302, Centre RAPSODEE, Albi, France
    Thibaut ESENCE, Eco-Tech Ceram, Balma, France
    Jean-Régis MARTINENT, Eco-Tech Ceram, Balma, France
    Yasmine LALAU, Université de Toulouse, IMT Mines Albi, CNRS UMR 5302, Centre RAPSODEE, Albi, France
    Doan PHAM MINH, Université de Toulouse, IMT Mines Albi, CNRS UMR 5302, Centre RAPSODEE, Albi, France

    person_pinIsis DUREUIL, Université de Toulouse, IMT Mines Albi, CNRS UMR 5302, Centre RAPSODEE, Albi, France
    S9-P224 - WO3 film prepared by ultrasonic spray and its application in energy storage deviceFang-Chi HSU, National United University, Miaoli, Taiwan
    Chi-Ping LI, National United University, Miaoli, Taiwan
    Kuei-Yang LAI, National United University, Miaoli, Taiwan
    Huey Jiuan LIN, National United University, Miaoli, Taiwan

    person_pinFang-Chi HSU, National United University, Miaoli, Taiwan
    S9-P225 - Improving Electrode Materials by Nanoscale Coatings using Plasma Enhanced CVD with Application in Sustainable Energy StorageDavid PATRUN, University of Cologne, Cologne, Germany
    Thomas FISCHER, University of Cologne, Cologne, Germany
    Ziyaad AYTUNA, University of Cologne, Cologne, Germany
    Sanjay MATHUR, University of Cologne, Cologne, Germany

    person_pinDavid PATRUN, University of Cologne, Cologne, Germany
    S9-P226 - Optimizing hybrid supercapacitor fabricated with partially graphitic activated carbon and LTO having 3-D carbon networkSeo Hui KANG, Korea Institute of Ceramic Engineering and Technology, Jinju, Korea (Republic of)
    Kwang Chul ROH, Korea Institute of Ceramic Engineering and Technology, Jinju, Korea (Republic of)

    person_pinKwang Chul ROH, Korea Institute of Ceramic Engineering and Technology, Jinju, Korea (Republic of)
    S10-P310 - Bioceramics of complex chemical composition and architecture based on heavily-doped stabilized glaserite-like phasesPavel EVDOKIMOV, Lomonosov Moscow State University, Moscow, 119991, RUSSIA
    Nikolay LEONTYEV, Lomonosov Moscow State University, Moscow, 119991, RUSSIA
    Victoria BITANOVA, Lomonosov Moscow State University, Moscow, 119991, RUSSIA
    Dmitriy DMITRIY LARIONOV, Lomonosov Moscow State University, Moscow, 119991, RUSSIA
    Albina MURASHKO, Lomonosov Moscow State University, Moscow, 119991, RUSSIA
    Yaroslav FILIPPOV, Lomonosov Moscow State University, Moscow, 119991, RUSSIA
    Alexey GARSHEV, Lomonosov Moscow State University, Moscow, 119991, RUSSIA
    Olesya KAPITANOVA, Lomonosov Moscow State University, Moscow, 119991, RUSSIA
    Valery PUTLAYEV, Lomonosov Moscow State University, Moscow, 119991, RUSSIA

    person_pinPavel EVDOKIMOV, Lomonosov Moscow State University, Moscow, 119991, RUSSIA
    S10-LP-304 - Development of a single-mode microwave cavity for the reactive sintering of hydroxyapatiteNathalie DOUARD, Mines Saint-Étienne, Univ Jean Monnet, INSERM, U 1059 Sainbiose, Saint-Etienne, France
    Clémence PETIT, Mines Saint-Etienne, Université Lyon, CNRS, UMR 5307 LGF, Centre SMS, Saint-Etienne, France
    Christophe MEUNIER, Mines Saint-Etienne, Université Lyon, CNRS, UMR 5307 LGF, Centre SMS, Saint-Etienne, France
    Tom BASLER,
    Romain JOURNIAC,

    person_pinNathalie DOUARD, Mines Saint-Étienne, Univ Jean Monnet, INSERM, U 1059 Sainbiose, Saint-Etienne, France
    S10-P227 - Surface modifications of PEEK implants to promote adhesion of cold sprayed hydroxyapatite coatingClement DESCHAMPS, CIRIMAT, Université de Toulouse, Toulouse, FRANCE
    P. BERTRAND, ICB, Université de Bourgogne Franche-Comté, FRANCE
    M. AUFRAY, CIRIMAT, Université de Toulouse, Toulouse, FRANCE
    D. GROSSIN, CIRIMAT, Université de Toulouse, Toulouse, FRANCE
    G. BERTRAND, CIRIMAT, Université de Toulouse, Toulouse, FRANCE
    Christophe DROUET, CIRIMAT, Université de Toulouse, Toulouse, FRANCE

    person_pinClement DESCHAMPS, CIRIMAT, Université de Toulouse, Toulouse, FRANCE
    S10-P230 - 45S5 Bioglass®-based compositions containing alumina and strontiumMariana S. ARAUJO, IPEN - Instituto de Pesquisas Energéticas e Nucleares, São Paulo, Brazil
    José F. BARTOLOMÉ, Instituto de Ciencia de Materiales de Madrid (ICMM), Madrid, Spain
    Sonia MELLO-CASTANHO, IPEN - Instituto de Pesquisas Energéticas e Nucleares, São Paulo, Brazil

    person_pinSonia MELLO-CASTANHO, IPEN - Instituto de Pesquisas Energéticas e Nucleares, São Paulo, Brazil
    S10-P231 - Comparative assessment of the Bioglasses 45S5, 58S, MBG 58S and S53P4: Physicochemical, Bioactive and Biological properties Bianca GUEDERT, Ceramic and Composite Materials Research Group (CERMAT), Federal University of Santa Catarina (UFSC), 88040-900, Florianopolis, SC, Brazil, Florianópolis, Brazil
    Márcio FREDEL, Ceramic and Composite Materials Research Group (CERMAT), Federal University of Santa Catarina (UFSC), 88040-900, Florianopolis, SC, Brazil, Florianópolis, Brazil
    Crm ROESLER, Mechanical Engineering Department, Biomechanical Engineering Laboratory, University Hospital and Federal University of Santa Catarina (UFSC), Florianópolis, Brazil., Florianópolis, Brazil
    Ariadne CRUZ, Applied Virology Laboratory (LVA), Federal University of Santa Catarina (UFSC), Campus Trindade, Florianopolis, SC, Brazil., Florianópolis, Brazil
    Bruno HENRIQUES,

    person_pinBruno HENRIQUES, Ceramic and Composite Materials Research Group (CERMAT), Federal University of Santa Catarina (UFSC), 88040-900, Florianopolis, SC, Brazil, Florianópolis, Brazil; Center for Micro-Electro Mechanical Systems (CMEMS-UMinho), University of Minho, Campus de Azurém, 4800-058 Guimarães, Portugal, Guimarães, Portugal
    S10-P232 - Porous bioceramic scaffolds prepared from supercritically dried sol-gel derived calcium phosphatesFloren RADOVANOVIC-PERIC, Faculty of Chemical Engineering and Technology, Zagreb, Croatia
    Vilko MANDIC, Faculty of Chemical Engineering and Technology, Zagreb, Croatia
    Arijeta BAFTI, Faculty of Chemical Engineering and Technology, Zagreb, Croatia

    person_pinFloren RADOVANOVIC-PERIC, Faculty of Chemical Engineering and Technology, Zagreb, Croatia
    S10-P233 - Reaction control in magnesium phosphate bioceramics by citric acidAlberto VIANI,
    Petra MÁCOVÁ, Institute of Theoretical and Applied Mechanics of the Czech Academy of Sciences, Prague, Czechia
    Lucie ZÁRYBNICKÁ, Institute of Theoretical and Applied Mechanics of the Czech Academy of Sciences, Prague, Czechia
    Radek ŠEV?ÍK, Institute of Theoretical and Applied Mechanics of the Czech Academy of Sciences, Prague, Czechia

    person_pinAlberto VIANI, Slovenian National Building and Civil Engineering Institute - ZAG, Ljubljana, Slovenia; Institute of Theoretical and Applied Mechanics of the Czech Academy of Sciences, Prague, Czechia
    S10-P234 - Mechanical testing of zirconia scaffolds prepared via MSLA infiltrated with porous calcium phosphatesLucie PEJCHALOVA, Central European Institute of Technology, Brno University of Technology, Brno, Czechia
    Tomas SPUSTA, Central European Institute of Technology, Brno University of Technology, Brno, Czechia
    Andraz KOCJAN, Jozef Stefan Institute, Ljubljana, Slovenia
    Jakub ROLECEK, Central European Institute of Technology, Brno University of Technology, Brno, Czechia
    David SALAMON, Central European Institute of Technology, Brno University of Technology, Brno, Czechia

    person_pinLucie PEJCHALOVA, Central European Institute of Technology, Brno University of Technology, Brno, Czechia
    S10-P237 - Silicon nitride based biocomposites prepared by alkaline activationGuido Manuel DE LA TORRE OLVERA, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Bratislava, Slovakia
    Gianmarco TAVERI, Centre for Advanced Materials Application (CEMEA), SAS, Bratislava , Slovakia
    Luca BERTOLLA, Institute of Physics of Materials of the Czech Academy of Sciences, CEITEC IPM, Brno, Czechia
    Martina LABUDOVA, Biomedical Research Center of the Slovak Academy of Sciences, Bratislava, Slovakia
    Miroslav HNATKO,
    Monika TATARKOVÁ, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Bratislava, Slovakia

    person_pinGuido Manuel DE LA TORRE OLVERA, Institute of Inorganic Chemistry, Slovak Academy of Sciences, Bratislava, Slovakia
    S10-P238 - Influence of platelet lysates in the calcium-phosphate-based cement propertiesMiguel COELHO,
    Tiago CORREIA, Department of Chemistry, CICECO-Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    João MANO, Department of Chemistry, CICECO-Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    Susana OLHERO, Department of Materials Engineering and Ceramics, CICECO-Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    Paula M. C. TORRES, Department of Materials Engineering and Ceramics, CICECO-Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal

    person_pinPaula M. C. TORRES, Department of Materials Engineering and Ceramics, CICECO-Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    S10-P239 - Zirconia-HEA joints for biomedical applications: the role of Ag-based fillers on interfacial reactivitySofia GAMBARO, CNR-ICMATE National Research Council - Institute of Condensed Matter Chemistry and Technologies for Energy, Genova, Italy
    Fabrizio VALENZA, CNR-ICMATE National Research Council - Institute of Condensed Matter Chemistry and Technologies for Energy, Genova, Italy
    Paola RIANI, UNIGE-DCCI University of Genova, Chemistry and Industrial Chemistry Department, Genova, Italy
    Gabriele CACCIAMANI,

    person_pinFabrizio VALENZA, CNR-ICMATE National Research Council - Institute of Condensed Matter Chemistry and Technologies for Energy, Genova, Italy
    S10-P240 - Hybrid ceramic-human cell biomaterial elaborated by additive manufacturing and 3D bioprinting for applications in bone surgery.Souad HAMRAOUI, University of Limoges, CNRS, Institute of ceramics research, UMR 7315, F-87000, Limoges , France
    Jeremy HARDY,
    Pierre-Sylvian MARCHEIX,
    Patricia PASCAUD MATHIAU, University of Limoges, CNRS, Institute of ceramics research, UMR 7315, F-87000, Limoges , France
    Betty LAVERDET, University of Limoges, CNRS, Institute of ceramics research, UMR 7315, F-87000, Limoges , France
    Karine GIRY, University of Limoges, CNRS, Institute of ceramics research, UMR 7315, F-87000, Limoges , France
    Philippe LEPROUX, Univ. Limoges, CNRS, XLIM, URM 7252, 123 av. Albert thomas, Limoges, France
    Eric CHAMPION, University of Limoges, CNRS, Institute of ceramics research, UMR 7315, F-87000, Limoges , France
    Amandine MAGNAUDEIX, University of Limoges, CNRS, Institute of ceramics research, UMR 7315, F-87000, Limoges , France

    person_pinSouad HAMRAOUI, University of Limoges, CNRS, Institute of ceramics research, UMR 7315, F-87000, Limoges , France
    S10-P241 - Structural & mechanical properties of triple coating systems using zirconia and porcelain on 3D printed Ti implants in SBF.Eleni ROUSSI, School of Mining and Metallurgical Engineering, National Technical University of Athens, Athens, Greece
    Ioanna KITSOU, School of Mining and Metallurgical Engineering, National Technical University of Athens, Athens, Greece
    Michaela PAPAGEORGIOU, School of Mining and Metallurgical Engineering, National Technical University of Athens, Athens, Greece
    Paraskevi GKOMOZA, School of Mining and Metallurgical Engineering, National Technical University of Athens, Athens, Greece
    Dimitra GIASAFAKI, MIRTEC S.A., Schimatari, Greece
    D. E. BACIU, MIRTEC S.A., Schimatari, Greece
    Nikolaos GALANIS, School of Mechanical Engineering, National Technical University of Athens, Athens, Greece
    Ioannis PAPANTONIOU, School of Mechanical Engineering, National Technical University of Athens, Athens, Greece
    Stavros LYKAKOS, School of Mechanical Engineering, National Technical University of Athens, Athens, Greece
    Konstantinos KERASIOTIS, School of Mechanical Engineering, National Technical University of Athens, Athens, Greece
    Constantina ANDREOULI, MIRTEC S.A., Schimatari, Greece
    Ilias GEORGIOPOULOS, MIRTEC S.A., Schimatari, Greece
    Dimitrios MANOLAKOS, School of Mechanical Engineering, National Technical University of Athens, Athens, Greece
    Athena TSETSEKOU, School of Mining and Metallurgical Engineering, National Technical University of Athens, Athens, Greece

    person_pinIoanna KITSOU, School of Mining and Metallurgical Engineering, National Technical University of Athens, Athens, Greece
    S10-P243 - Reduced graphene coating of a Si-Ca-P bioceramic enhance adhesion, growth and differentiation of human mechenchymal stem cellsPatricia MAZON, Universidad Miguel Hernández de Elche- Instituto de Bioingeniería, Elche (Alicante), Spain
    Jeevithan ELANGO, Universidad Católica San Antonio de Murcia- Department of Biomaterials Engineering, Guadalupe (Murcia), Spain
    Jose E. MATÉ SÁNCHEZ DE VAL, Universidad Católica San Antonio de Murcia- Department of Biomaterials Engineering, Guadalupe (Murcia), Spain
    Piedad N. DE AZA, Universidad Miguel Hernández de Elche- Instituto de Bioingeniería, Elche (Alicante), Spain

    person_pinPiedad N. DE AZA, Universidad Miguel Hernández de Elche- Instituto de Bioingeniería, Elche (Alicante), Spain
    S10-P244 - Development of magnetic PLA/CaP-based biocomposite for tissue engineering applicationsTania S. S. CARVALHO, Department of Materials Engineering and Ceramics, CICECO-Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    Nilza RIBEIRO, Department of Materials Engineering and Ceramics, CICECO-Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    Paula M. C. TORRES, Department of Materials Engineering and Ceramics, CICECO-Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    José C. ALMEIDA, Department of Materials Engineering and Ceramics, CICECO-Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    João H. BELO, Institute of Physics of Advanced Materials, Nanotechnology and Photonics (IFIMUP), Department of Physics and Astronomy, University of Porto, Porto, Portugal
    João P. ARAÚJO, Institute of Physics of Advanced Materials, Nanotechnology and Photonics (IFIMUP), Department of Physics and Astronomy, University of Porto, Porto, Portugal
    António RAMOS, Department of Mechanical Engineering, TEMA-Centre for Mechanical Technology and Automation, University of Aveiro, Portugal, Aveiro, Portugal
    Mónica OLIVEIRA, Department of Mechanical Engineering, TEMA-Centre for Mechanical Technology and Automation, University of Aveiro, Portugal, Aveiro, Portugal
    Susana M. OLHERO, Department of Materials Engineering and Ceramics, CICECO-Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal

    person_pinSusana M. OLHERO, Department of Materials Engineering and Ceramics, CICECO-Aveiro Institute of Materials, University of Aveiro, Aveiro, Portugal
    S10-P245 - Synthesis of new Sr-doped multilayer ceramic-glass-ceramic scaffolds obtained by Sol-Gel method with high mechanical propertiesKarina SALAZAR, Universidad Miguel Hernández de Elche- Instituto de Bioingeniería, Elche, Spain
    Angel MURCIANO, Universidad Miguel Hernández de Elche- Dpto. de Ciencia de Materiales, Óptica y Tecnología Electrónica, Elche, Spain
    Piedad N. DE AZA, Universidad Miguel Hernández de Elche- Instituto de Bioingeniería, Elche, Spain
    Pablo VELASQUEZ, Universidad Miguel Hernández de Elche- Instituto de Bioingeniería, Elche, Spain

    person_pinPiedad N. DE AZA, Universidad Miguel Hernández de Elche- Instituto de Bioingeniería, Elche, Spain
    S10-P246 - Freeze-Casting Bioceramics with Patterned SurfacesChristina Basse RIEL, Department of Energy Conversion and Storage, Technical University of Denmark, 2800-Kgs. Lyngby, Denmark
    Jean-Claude GRIVEL, Department of Energy Conversion and Storage, Technical University of Denmark, 2800-Kgs. Lyngby, Denmark
    Christian BAHL, Department of Energy Conversion and Storage, Technical University of Denmark, 2800-Kgs. Lyngby, Denmark
    Rasmus BJØRK, Department of Energy Conversion and Storage, Technical University of Denmark, 2800-Kgs. Lyngby, Denmark

    person_pinChristina Basse RIEL, Department of Energy Conversion and Storage, Technical University of Denmark, 2800-Kgs. Lyngby, Denmark
    S10-P249 - MULTIFUNCTIONAL BIOACTIVE GLASS NANOPARTICLES FOR BONE TISSUE ENGINEERINGMargot MURATET-MARAVAL , Université Clermont Auvergne, Clermont Auvergne INP, CNRS, ICCF, F-63000 Clermont-Ferrand, France, France
    Florestan VERGNAUD , Université Clermont Auvergne, Clermont Auvergne INP, CNRS, ICCF, F-63000 Clermont-Ferrand, France, France
    Charlotte VICHERY, Université Clermont Auvergne, Clermont Auvergne INP, CNRS, ICCF, F-63000 Clermont-Ferrand, France, France
    Jean-Marie NEDELEC, Université Clermont Auvergne, Clermont Auvergne INP, CNRS, ICCF, F-63000 Clermont-Ferrand, France, France

    person_pinMargot MURATET-MARAVAL , Université Clermont Auvergne, Clermont Auvergne INP, CNRS, ICCF, F-63000 Clermont-Ferrand, France, France
    S10-P250 - Macroporous biphasic calcium phosphate materials for bone substitute applicationsDanielle MADEFO TCHUYASSI, BCRC, Mons, Belgium
    Stéphane HOCQUET, BCRC, Mons, Belgium
    Marie LASGORCEIX, CERAMATHS-DMP - Université Polytechnique Hauts-de-France, Valenciennes, France

    person_pinStéphane HOCQUET, BCRC, Mons, Belgium
    S11-P251 - Combining XRD, SEM and micro-CT analyses to assess mineralogical phase distribution in Recycled Aggregates Concrete microstructureAndrea BISCIOTTI, University of Ferrara, Via Saragat 1, 44122 Ferrara., Italy
    Lucia MANCINI, ZAG - Slovenian National Building and Civil Engineering Institute, Dimičeva ulica 12, 1000 Ljubljana., Slovenia
    Alberto VIANI, ZAG - Slovenian National Building and Civil Engineering Institute, Dimičeva ulica 12, 1000 Ljubljana., Slovenia
    Ana MLADENOVIC, ZAG - Slovenian National Building and Civil Engineering Institute, Dimičeva ulica 12, 1000 Ljubljana., Slovenia
    Giuseppe CRUCIANI, University of Ferrara, Via Saragat 1, 44122 Ferrara., Italy

    person_pinAndrea BISCIOTTI, University of Ferrara, Via Saragat 1, 44122 Ferrara., Italy
    S11-P252 - Evaluation of residual tension in enamelled large porcelain stoneware slabs though chemical and mineralogical phase evolutionMattia SISTI, Department of Chemical and Geological Sciences - University of Modena and Reggio Emilia, Modena, Italy
    Daniele GIOVANELLI, Marazzi Group S.r.l., Sassuolo, Italy
    Matteo MAZZIERI, Marazzi Group S.r.l., Sassuolo, Italy
    Michela PIFFERI, Marazzi Group S.r.l., Sassuolo, Italy
    Riccardo FANTINI, Department of Chemical and Geological Sciences - University of Modena and Reggio Emilia, Modena, Italy
    Alessandro GUALTIERI, Department of Chemical and Geological Sciences - University of Modena and Reggio Emilia, Modena, Italy
    Rossella ARLETTI, Department of Chemical and Geological Sciences - University of Modena and Reggio Emilia, Modena, Italy

    person_pinMattia SISTI, Department of Chemical and Geological Sciences - University of Modena and Reggio Emilia, Modena, Italy
    S11-P253 - Frit-Free Glaze for Ceramics using Alternative Raw Materials: A Design of Experiments Approach on its Formulation and OptimisationErika Iveth CEDILLO GONZÁLEZ,
    Marta BUTAZZO, Smalticeram Unicer S.p.A , Roteglia, Italy
    Anna Maria FERRARI, University of Modena and Reggio Emilia, Modena, Italy
    Giorgia FOCA, University of Modena and Reggio Emilia, Modena, Italy
    Cristina SILIGARDI,

    person_pinErika Iveth CEDILLO GONZÁLEZ, University of Modena and Reggio Emilia, Modena, Italy; National Interuniversity Consortium of Materials Science and Technology (INSTM), Florence, Italy
    S11-P254 - Formulation and mechanical properties of extruded geopolymersCamille ZOUDE, Univ Lyon, INSA Lyon, Université Claude Bernard Lyon 1, CNRS, MATEIS, UMR5510, Villeurbanne , France
    Laurent GREMILLARD, Univ Lyon, INSA Lyon, Université Claude Bernard Lyon 1, CNRS, MATEIS, UMR5510, Villeurbanne , France
    Elodie PRUD'HOMME, Univ Lyon, INSA Lyon, Université Claude Bernard Lyon 1, CNRS, MATEIS, UMR5510, Villeurbanne , France
    Kevyn JOHANNES, Univ Lyon, Université Claude Bernard Lyon 1, INSA Lyon, CNRS, CETHIL, UMR5008, Villeurbanne , France

    person_pinCamille ZOUDE, Univ Lyon, INSA Lyon, Université Claude Bernard Lyon 1, CNRS, MATEIS, UMR5510, Villeurbanne , France
    S11-P255 - Glass-supported Large Scale Additive Manufacturing of Sustainable CeramicsHamada ELSAYED,
    Filippo GOBBIN, University of Padova, Industrial Engineering Department, Padova, Italy
    Enrico BERNARDO, University of Padova, Industrial Engineering Department, Padova, Italy
    Paolo COLOMBO,

    person_pinHamada ELSAYED, University of Padova, Industrial Engineering Department, Padova, Italy; Refractories, Ceramics and Building Materials Department, National Research Centre, Cairo, Egypt
    S11-P256 - Advanced in-situ 3D imaging techniques for the investigation of failure mechanism in high-strength concrete affected by ASRAna MLADENOVIC, Slovenian National Building and Civil Engineering Institute - ZAG, Ljubljana, Slovenia
    Lucia MANCINI, Slovenian National Building and Civil Engineering Institute - ZAG, Ljubljana, Slovenia
    Alberto VIANI, Slovenian National Building and Civil Engineering Institute - ZAG, Ljubljana, Slovenia
    Nicoletta MARINONI, Universita´ degli Studi di Milano, Dipartimento di Scienze della Terra, Milano, Italy
    Petra MÁCOVÁ, Institute of Theoretical and Applied Mechanics of the Czech Academy of Sciences, Prague, Czechia
    Primož OPRCKAL, Slovenian National Building and Civil Engineering Institute - ZAG, Ljubljana, Slovenia
    Lucia PAPPALARDO, Istituto Nazionale di Geofisica e Vulcanologia, Sezione di Napoli - Osservatorio Vesuviano, Napoli, Italy
    Gianmarco BUONO, Istituto Nazionale di Geofisica e Vulcanologia, Sezione di Napoli - Osservatorio Vesuviano, Napoli, Italy
    Alenka MAUKO, Slovenian National Building and Civil Engineering Institute - ZAG, Ljubljana, Slovenia

    person_pinLucia MANCINI, Slovenian National Building and Civil Engineering Institute - ZAG, Ljubljana, Slovenia
    S11-P257 - Air permeability measurements for roofing systemBenedetta FERRARI, Centro Ceramico, Bologna, Italy
    Marco D’ORAZIO, Department of Construction, Civil Engineering and Architecture (DICEA) - Marche Polytechnic University, Ancona, Italy
    Elisa DI GIUSEPPE, Department of Construction, Civil Engineering and Architecture (DICEA) - Marche Polytechnic University, Ancona, Italy
    Mathieu HERVY, Centre Technique des Matériaux Naturels de Construction, Paris, France
    Maria Chiara MOLINARI,

    person_pinMaria Chiara MOLINARI,
    S11-P258 - Potential of application of biomass ashes in construction materialsMarinélia CAPELA, Department of Materials and Ceramic Engineering, CICECO - Aveiro Institute of Materials, University of Aveiro, 3810-193, Aveiro, Portugal, Aveiro, Portugal
    David TOBALDI, CNR Nanotec, Institute of Nanotechnology, Campus Ecoteckne, 73100 Lecce, Italy, Lecce, Italy
    Luís TARELHO, Department of Environment and Planning, CESAM - Centre for Environmental and Marine Studies, University of Aveiro, 3810-193 Aveiro, Portugal, Aveiro, Portugal
    Maria Paula SEABRA, Department of Materials and Ceramic Engineering, CICECO - Aveiro Institute of Materials, University of Aveiro, 3810-193, Aveiro, Portugal, Aveiro, Portugal
    João LABRINCHA, Department of Materials and Ceramic Engineering, CICECO - Aveiro Institute of Materials, University of Aveiro, 3810-193, Aveiro, Portugal, Aveiro, Portugal

    person_pinMarinélia CAPELA, Department of Materials and Ceramic Engineering, CICECO - Aveiro Institute of Materials, University of Aveiro, 3810-193, Aveiro, Portugal, Aveiro, Portugal
    S11-P259 - Recycling of bottom bed ashes from biomass combustion in a commercial screed mortar: A preliminary assessment  Marinélia CAPELA, Department of Materials and Ceramic Engineering, CICECO - Aveiro Institute of Materials, University of Aveiro, 3810-193, Aveiro, Portugal, Aveiro, Portugal
    João LABRINCHA, Department of Materials and Ceramic Engineering, CICECO - Aveiro Institute of Materials, University of Aveiro, 3810-193, Aveiro, Portugal, Aveiro, Portugal
    Maria Paula SEABRA, Department of Materials and Ceramic Engineering, CICECO - Aveiro Institute of Materials, University of Aveiro, 3810-193, Aveiro, Portugal, Aveiro, Portugal

    person_pinMarinélia CAPELA, Department of Materials and Ceramic Engineering, CICECO - Aveiro Institute of Materials, University of Aveiro, 3810-193, Aveiro, Portugal, Aveiro, Portugal
    S12-LP-306 - Dark field electron microscopy: A new way of imaging embedded defects with high resolution  Raquel RODRIGUEZ LAMAS, European Synchrotron Radiation Facility, Grenoble, France
    David BUGALLO ,
    Eric LANGENBERG, Department of Condensed Matter Physics, Universidad de Barcelona , Barcelona , Spain
    Can YILDIRIM, European Synchrotron Radiation Facility, Grenoble, France
    Francisco RIVADULLA,
    Carsten DETLEFS, European Synchrotron Radiation Facility, Grenoble, France

    person_pinRaquel RODRIGUEZ LAMAS, European Synchrotron Radiation Facility, Grenoble, France
    S12-LP-305 - Plasma FIB-SEM Tomography and Deep Learning Segmentation of Ceramic Coated Nuclear Fuel ParticlesEleanor WHITE, University of Bristol, Bristol, United Kingdom
    Samuel WATERS, United Kingdom Atomic Energy Authority, Abingdon, United Kingdom
    James POMEROY, University of Bristol, Bristol, United Kingdom
    Mark DAVIES, Ultra Safe Nuclear Corporation UK Ltd, Merseyside , United Kingdom
    Dave GODDARD, National Nuclear Laboratory, Preston, United Kingdom
    Nassia TZELEPI, National Nuclear Laboratory, Sellafield, United Kingdom
    Martin KUBALL, University of Bristol, Bristol, United Kingdom
    Dong LIU, University of Bristol, Bristol, United Kingdom

    person_pinEleanor WHITE, University of Bristol, Bristol, United Kingdom
    S12-P308 - Combining advanced characterization techniques with machine learning principles: DFXM and darfixJulia GARRIGA FERRER, ESRF, Grenoble, France
    Raquel RODRÍGUEZ-LAMAS, ESRF, Grenoble, France
    Can YILDIRIM, ESRF, Grenoble, France
    Vincent FAVRE-NICOLIN, ESRF, Grenoble, France
    Carsten DETLEFS, ESRF, Grenoble, France

    person_pinJulia GARRIGA FERRER, ESRF, Grenoble, France
    S12-P260 - Characterization of HIGH PURITY Alumina SLURRIES by analytical centrifugationSylvain GRESSIER, LUM GmbH France, Plaisir, France
    Livia MARRA, Baikowski, Poisy, France

    person_pinSylvain GRESSIER, LUM GmbH France, Plaisir, France
    S12-P261 - Operando observation of the change in the internal structure of the SiO2 slurry during the drying process by OCTHiromasa KURODA, Yokohama National University, Yokohama, Japan
    Junichi TATAMI, Yokohama National University, Yokohama, Japan
    Motoyuki IIJIMA, Yokohama National University, Yokohama, Japan
    Takuma TAKAHASHI, Kanagawa Institute of Industrial Science and Technology, Ebina, Japan

    person_pinHiromasa KURODA, Yokohama National University, Yokohama, Japan
    S12-P263 - Microstructural observation and analysis of sintered alumina by synchrotron radiation multi-scale CT  Haruki MINAGAWA, Tokyo University of Science, Tokyo, Japan
    Gaku OKUMA, National Institute for Materials Science, Ibaraki, Japan
    Yutaro ARAI, Tokyo University of Science, Tokyo, Japan
    Hideki KAKISAWA, National Institute for Materials Science, Ibaraki, Japan
    Satoshi TANAKA, Nagaoka University of Technology, Nigata, Japan
    Fumihiro WAKAI, National Institute for Materials Science, Ibaraki, Japan
    Ryo INOUE, Tokyo University of Science, Tokyo, Japan

    person_pinHaruki MINAGAWA, Tokyo University of Science, Tokyo, Japan
    S12-P264 - Polarized micro-infrared spectroscopy and dielectric response of giant-grain Zn2GeO4 ceramicsRoberto MOREIRA, Universidade Federal de Minas Gerais, Belo Horizonte, Brazil
    Jéssica VIEGAS, Universidade Federal de Minas Gerais, Belo Horizonte, Brazil
    Anderson DIAS, Universidade Federal de Minas Gerais, Belo Horizonte, Brazil

    person_pinRoberto MOREIRA, Universidade Federal de Minas Gerais, Belo Horizonte, Brazil
    S12-P265 - Optimization Study for Material Properties of Piezoelectric PZT Material Using ParameterÊ- Estimation MethodJong-Ho KIM, Korea Institute of Ceramic Engineering and Thechnology, Jinju, Korea (Republic of)
    Ho-Yong SHIN, Korea Institute of Ceramic Engineering and Thechnology, Jinju, Korea (Republic of)
    Chan-Yeup CHUNG, Korea Institute of Ceramic Engineering and Thechnology, Jinju, Korea (Republic of)

    person_pinJong-Ho KIM, Korea Institute of Ceramic Engineering and Thechnology, Jinju, Korea (Republic of)
    S12-P266 - Piezoelectric property optimization for piezoelectric single crystals using parametric estimationHo-Yong SHIN, Korea Institute of Ceramic Engineering and Thechnology, Jinju, Korea (Republic of)
    Jong-Ho KIM, Korea Institute of Ceramic Engineering and Thechnology, Jinju, Korea (Republic of)
    Jong-In IM, Korea Institute of Ceramic Engineering and Thechnology, Jinju, Korea (Republic of)

    person_pinHo-Yong SHIN, Korea Institute of Ceramic Engineering and Thechnology, Jinju, Korea (Republic of)
    S12-P267 - Latest advancements in laboratory powder X-ray diffraction instrumentationBenedikt SCHRODE, Anton Paar GmbH, Graz, Austria
    Andrew O. F. JONES, Anton Paar GmbH, Graz, Austria
    Marius KREMER, Anton Paar GmbH, Graz, Austria
    Timo MÜLLER, Anton Paar GmbH, Graz, Austria
    Barbara PUHR, Anton Paar GmbH, Graz, Austria
    Praveen VIR, Anton Paar GmbH, Graz, Austria

    person_pinBenedikt SCHRODE, Anton Paar GmbH, Graz, Austria
    S13-P269 - Method optimisation for the analysis of ancient glass using laser ablation inductively couple plasma mass spectrometryLiam RICHARDS, UCL Institute of Archaeology, London, United Kingdom
    Michael CHARLTON, UCL Institute of Archaeology, London, United Kingdom

    person_pinLiam RICHARDS, UCL Institute of Archaeology, London, United Kingdom
    S13-P271 - Ceramics in Slovenia after the Collapse of the Ceramics Industry  Kristina RUTAR, University of Ljubljana, Academy of Fine Art and Design, Ljubljana, Slovenia

    person_pinKristina RUTAR, University of Ljubljana, Academy of Fine Art and Design, Ljubljana, Slovenia
    S15-P275 - NOMAD: Novel biomaterials to prevent dental peri-implant infectionsAnnabel BRAEM, KU Leuven, Leuven, Belgium
    Merve KÜBRA AKTAN, KU Leuven, Leuven, Belgium
    Jozef VLEUGELS, KU Leuven, Leuven, Belgium
    Bart VAN MEERBEEK, KU Leuven, Leuven, Belgium
    Wim TEUGHELS, KU Leuven, Leuven, Belgium
    Karin THEVISSEN, KU Leuven, Leuven, Belgium
    Isabelle FRANÇOIS, Health House, Leuven, Belgium
    Laurent GREMILLARD, Centre National de la Recherche Scientifique Lyon, Lyon, France
    Yann CHEVOLOT, Ecole Centrale de Lyon, Lyon, France
    Emmanuelle LAURENCEAU, Ecole Centrale de Lyon, Lyon, France
    Mariano SANZ, Universidad Complutense de Madrid, Madrid, Spain
    Ariana BARLIC, Educell d.o.o., Ljubljana, Slovenia
    Nestor RODRIGUEZ, Atrineo AG, Karlsruhe, Germany
    Henny VAN DER MEI, University Medical Center Groningen, Groningen, Netherlands
    Nicolas COURTOIS, Anthogyr SAS, Sallanches, France
    John HANRAHAN, Glantreo Ltd, Cork, Ireland
    Melissa COURTNEY, Glantreo Ltd, Cork, Ireland
    Shane KEAVENEY, Croom Precision Tooling Ltd, Limerick, Ireland
    Manuela Sonja KILLIAN, Universität Siegen, Siegen, Germany

    person_pinJozef VLEUGELS, KU Leuven, Leuven, Belgium
    S15-P276 - Bio-mechanical properties of polymer/ceramic 3D-printed scaffolds for periodontal regenerationAlessandro MOSCA BALMA, Department of Surgical Sciences, C.I.R. Dental School, Università di Torino, Torino, Italy
    Mattia DI MARO, Institute of Sciences and Technologies for Sustainable Energy and Mobility, National Council of Research, Torino, Italy
    Donatella DURACCIO, Institute of Sciences and Technologies for Sustainable Energy and Mobility, National Council of Research, Torino, Italy
    Maria Giulia FAGA, Institute of Sciences and Technologies for Sustainable Energy and Mobility, National Council of Research, Torino, Italy
    Giulio MALUCELLI, Department of Applied Science and Technology, Politecnico di Torino, and local INSTM Unit, Alessandria, Italy
    Riccardo PEDRAZA, Department of Surgical Sciences, C.I.R. Dental School, Università di Torino, Torino, Italy
    Ilaria ROATO, Department of Surgical Sciences, C.I.R. Dental School, Università di Torino, Torino, Italy
    Federico MUSSANO, Department of Surgical Sciences, C.I.R. Dental School, Università di Torino, Torino, Italy

    person_pinAlessandro MOSCA BALMA, Department of Surgical Sciences, C.I.R. Dental School, Università di Torino, Torino, Italy
    S15-P277 - Preliminary study of bovine-derived bone filler in bioresorbable polymeric 3D-printed scaffold for maxillary bone regenerationRiccardo PEDRAZA, Department of Surgical Science, C.I.R. Dental School, Università di Torino, Torino, Italy
    Mattia DI MARO, Institute of Sciences and Technologies for Sustainable Energy and Mobility, National Council of Research, Torino, Italy
    Maria Giulia FAGA, Institute of Sciences and Technologies for Sustainable Energy and Mobility, National Council of Research, Torino, Italy
    Donatella DURACCIO, Institute of Sciences and Technologies for Sustainable Energy and Mobility, National Council of Research, Torino, Italy
    Giulio MALUCELLI, Department of Applied Science and Technology, Politecnico di Torino, and local INSTM Unit, Alessandria, Italy
    Alessandro MOSCA BALMA, Department of Surgical Science, C.I.R. Dental School, Università di Torino, Torino, Italy
    Ilaria ROATO, Department of Surgical Science, C.I.R. Dental School, Università di Torino, Torino, Italy
    Federico MUSSANO, Department of Surgical Science, C.I.R. Dental School, Università di Torino, Torino, Italy

    person_pinRiccardo PEDRAZA, Department of Surgical Science, C.I.R. Dental School, Università di Torino, Torino, Italy
    S15-P278 - A fluorescent zirconia for dental useMeng XUE, Liaoning, Benxi, China

    person_pinMeng XUE, Liaoning, Benxi, China
    S15-P279 - A multilayer dental material and its preparation methodShi FENG, Liaoning province, Benxi, China

    person_pinShi FENG, Liaoning province, Benxi, China
  • EVENT PLANNER - Registration CONTACT
    INSIGHT OUTSIDE
    26, avenue Jean Kuntzmann - 38330 Montbonnot, France
    Tel: +33 825 595 525 (0,15€/min*)
    Information desk: Monday to Friday from 9:00 to 12:00 and 14:00 to 17:00
    OrganiSation
    European Ceramic Society
    Groupe Français de Céramique
    MATEIS (INSA Lyon, Université Lyon 1, CNRS)
    (*) Prices starting from fixed line incumbent, a surcharge may be applied by operators, counting the second after the first 45 seconds.

    According to France's Personal Data Privacy Act in effect since June 2004, you may send a request in writing to INSIGHT OUTSIDE 26 avenue Jean Kuntzmann - Montbonnot-Saint-Martin 38330 / France, or by email webmaster@insight-outside.fr to access your file in order to consult, modify and/or delete your personal information.

    ECerS 2023 logo and graphic design: SuperNova Design - ECerS 2023 photo : Frédéric Prochasson
    © Photos : Cité Internationale - Nicolas Robin, Joël Philippon, Nicolas Rodet, Studio Fly, Only Lyon - ww.b-rob.com, Frédéric Prochasson.


    © 2005 - 2024 Insight Outside